annotate hgext/fetch.py @ 36367:043e77f3be09

sshpeer: return framed file object when needed

Currently, wireproto.wirepeer has a default implementation of
_submitbatch() and sshv1peer has a very similar implementation.
The main difference is that sshv1peer is aware of the total amount
of bytes it can read whereas the default implementation reads the
stream until no more data is returned. The default implementation
works for HTTP, since there is a known end to HTTP responses (either
Content-Length or 0 sized chunk).

This commit teaches sshv1peer to use our just-introduced "cappedreader"
class for wrapping a file object to limit the number of bytes that
can be read. We do this by introducing an argument to specify whether
the response is framed. If set, we returned a cappedreader instance
instead of the raw pipe.

_call() always has framed responses. So we set this argument
unconditionally and then .read() the entirety of the result.
Strictly speaking, we don't need to use cappedreader in this case
and can inline frame decoding/read logic. But I like when things
are consistent. The overhead should be negligible.

_callstream() and _callcompressable() are special: whether framing
is used depends on the specific command. So, we define a set
of commands that have framed response. It currently only
contains "batch."

As a result of this change, the one-off implementation of
_submitbatch() in sshv1peer can be removed since it is now
safe to .read() the response's file object until end of stream.
cappedreader takes care of not overrunning the frame.

Differential Revision: https://phab.mercurial-scm.org/D2380

# fetch.py - pull and merge remote changes
#
# Copyright 2006 Vadim Gelfer <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

'''pull, update and merge in one command (DEPRECATED)'''

from __future__ import absolute_import

from mercurial.i18n import _
from mercurial.node import (
    short,
)
from mercurial import (
    cmdutil,
    error,
    exchange,
    hg,
    lock,
    pycompat,
    registrar,
    util,
)

release = lock.release
cmdtable = {}
command = registrar.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'

@command('fetch',
    [('r', 'rev', [],
     _('a specific revision you would like to pull'), _('REV')),
    ('', 'edit', None, _('invoke editor on commit messages')),
    ('', 'force-editor', None, _('edit commit message (DEPRECATED)')),
    ('', 'switch-parent', None, _('switch parents when merging')),
    ] + cmdutil.commitopts + cmdutil.commitopts2 + cmdutil.remoteopts,
    _('hg fetch [SOURCE]'))
def fetch(ui, repo, source='default', **opts):
    '''pull changes from a remote repository, merge new changes if needed.

    This finds all changes from the repository at the specified path
    or URL and adds them to the local repository.

    If the pulled changes add a new branch head, the head is
    automatically merged, and the result of the merge is committed.
    Otherwise, the working directory is updated to include the new
    changes.

    When a merge is needed, the working directory is first updated to
    the newly pulled changes. Local changes are then merged into the
    pulled changes. To switch the merge order, use --switch-parent.

    See :hg:`help dates` for a list of formats valid for -d/--date.

    Returns 0 on success.
    '''

    opts = pycompat.byteskwargs(opts)
    date = opts.get('date')
    if date:
        opts['date'] = util.parsedate(date)

    parent, _p2 = repo.dirstate.parents()
    branch = repo.dirstate.branch()
    try:
        branchnode = repo.branchtip(branch)
    except error.RepoLookupError:
        branchnode = None
    if parent != branchnode:
        raise error.Abort(_('working directory not at branch tip'),
                         hint=_("use 'hg update' to check out branch tip"))

    wlock = lock = None
    try:
        wlock = repo.wlock()
        lock = repo.lock()

        cmdutil.bailifchanged(repo)

        bheads = repo.branchheads(branch)
        bheads = [head for head in bheads if len(repo[head].children()) == 0]
        if len(bheads) > 1:
            raise error.Abort(_('multiple heads in this branch '
                               '(use "hg heads ." and "hg merge" to merge)'))

        other = hg.peer(repo, opts, ui.expandpath(source))
        ui.status(_('pulling from %s\n') %
                  util.hidepassword(ui.expandpath(source)))
        revs = None
        if opts['rev']:
            try:
                revs = [other.lookup(rev) for rev in opts['rev']]
            except error.CapabilityError:
                err = _("other repository doesn't support revision lookup, "
                        "so a rev cannot be specified.")
                raise error.Abort(err)

        # Are there any changes at all?
        modheads = exchange.pull(repo, other, heads=revs).cgresult
        if modheads == 0:
            return 0

        # Is this a simple fast-forward along the current branch?
        newheads = repo.branchheads(branch)
        newchildren = repo.changelog.nodesbetween([parent], newheads)[2]
        if len(newheads) == 1 and len(newchildren):
            if newchildren[0] != parent:
                return hg.update(repo, newchildren[0])
            else:
                return 0

        # Are there more than one additional branch heads?
        newchildren = [n for n in newchildren if n != parent]
        newparent = parent
        if newchildren:
            newparent = newchildren[0]
            hg.clean(repo, newparent)
        newheads = [n for n in newheads if n != newparent]
        if len(newheads) > 1:
            ui.status(_('not merging with %d other new branch heads '
                        '(use "hg heads ." and "hg merge" to merge them)\n') %
                      (len(newheads) - 1))
            return 1

        if not newheads:
            return 0

        # Otherwise, let's merge.
        err = False
        if newheads:
            # By default, we consider the repository we're pulling
            # *from* as authoritative, so we merge our changes into
            # theirs.
            if opts['switch_parent']:
                firstparent, secondparent = newparent, newheads[0]
            else:
                firstparent, secondparent = newheads[0], newparent
                ui.status(_('updating to %d:%s\n') %
                          (repo.changelog.rev(firstparent),
                           short(firstparent)))
            hg.clean(repo, firstparent)
            ui.status(_('merging with %d:%s\n') %
                      (repo.changelog.rev(secondparent), short(secondparent)))
            err = hg.merge(repo, secondparent, remind=False)

        if not err:
            # we don't translate commit messages
            message = (cmdutil.logmessage(ui, opts) or
                       ('Automated merge with %s' %
                        util.removeauth(other.url())))
            editopt = opts.get('edit') or opts.get('force_editor')
            editor = cmdutil.getcommiteditor(edit=editopt, editform='fetch')
            n = repo.commit(message, opts['user'], opts['date'], editor=editor)
            ui.status(_('new changeset %d:%s merges remote changes '
                        'with local\n') % (repo.changelog.rev(n),
                                           short(n)))

        return err

    finally:
        release(lock, wlock)