annotate mercurial/debugcommands.py @ 45892:06b64fabf91c

copies: cache the ancestor checking call when tracing copy

A good share of the time spent in this function is spent doing ancestors
checking. To avoid spending time in duplicated call, we cache the result of
calls.

In the slower case, this provide a quite significant performance boost. Below
are the result for a set of selected pairs (many of them pathological):

(And further down is another table that summarize the current state of filelog
based vs changeset base copy tracing)


The benchmark have been configured to be killed after 6 minutes of runtime,
which mean that any detect slower than 2 minutes will be marked as "killed".
This drop some useful information about how much slower these case are… but also
prevent 99% of the benchmark time to be spent on case that can be labelled "very
slow" anyway.


Repo            Case                                  Source-Rev   Dest-Rev         Old-Time      New-Time     Difference   Factor
------------------------------------------------------------------------------------------------------------------------------------
mercurial       x_revs_x_added_0_copies               ad6b123de1c7 39cfcef4f463 :   0.000044 s,   0.000044 s,  +0.000000 s, × 1.0000
mercurial       x_revs_x_added_x_copies               2b1c78674230 0c1d10351869 :   0.000138 s,   0.000138 s,  +0.000000 s, × 1.0000
mercurial       x000_revs_x000_added_x_copies         81f8ff2a9bf2 dd3267698d84 :   0.005067 s,   0.005052 s,  -0.000015 s, × 0.9970
pypy            x_revs_x_added_0_copies               aed021ee8ae8 099ed31b181b :   0.000218 s,   0.000219 s,  +0.000001 s, × 1.0046
pypy            x_revs_x000_added_0_copies            4aa4e1f8e19a 359343b9ac0e :   0.000053 s,   0.000055 s,  +0.000002 s, × 1.0377
pypy            x_revs_x_added_x_copies               ac52eb7bbbb0 72e022663155 :   0.000125 s,   0.000128 s,  +0.000003 s, × 1.0240
pypy            x_revs_x00_added_x_copies             c3b14617fbd7 ace7255d9a26 :   0.001098 s,   0.001089 s,  -0.000009 s, × 0.9918
pypy            x_revs_x000_added_x000_copies         df6f7a526b60 a83dc6a2d56f :   0.017546 s,   0.017407 s,  -0.000139 s, × 0.9921
pypy            x000_revs_xx00_added_0_copies         89a76aede314 2f22446ff07e :   0.096723 s,   0.094175 s,  -0.002548 s, × 0.9737
pypy            x000_revs_x000_added_x_copies         8a3b5bfd266e 2c68e87c3efe :   0.271796 s,   0.238009 s,  -0.033787 s, × 0.8757
pypy            x000_revs_x000_added_x000_copies      89a76aede314 7b3dda341c84 :   0.128602 s,   0.125876 s,  -0.002726 s, × 0.9788
pypy            x0000_revs_x_added_0_copies           d1defd0dc478 c9cb1334cc78 :   7.086742 s,   3.581556 s,  -3.505186 s, × 0.5054
pypy            x0000_revs_xx000_added_0_copies       bf2c629d0071 4ffed77c095c :   0.016634 s,   0.016721 s,  +0.000087 s, × 1.0052
pypy            x0000_revs_xx000_added_x000_copies    08ea3258278e d9fa043f30c0 :   0.254225 s,   0.242367 s,  -0.011858 s, × 0.9534
netbeans        x_revs_x_added_0_copies               fb0955ffcbcd a01e9239f9e7 :   0.000166 s,   0.000165 s,  -0.000001 s, × 0.9940
netbeans        x_revs_x000_added_0_copies            6f360122949f 20eb231cc7d0 :   0.000118 s,   0.000114 s,  -0.000004 s, × 0.9661
netbeans        x_revs_x_added_x_copies               1ada3faf6fb6 5a39d12eecf4 :   0.000296 s,   0.000296 s,  +0.000000 s, × 1.0000
netbeans        x_revs_x00_added_x_copies             35be93ba1e2c 9eec5e90c05f :   0.001137 s,   0.001124 s,  -0.000013 s, × 0.9886
netbeans        x000_revs_xx00_added_0_copies         eac3045b4fdd 51d4ae7f1290 :   0.014133 s,   0.013060 s,  -0.001073 s, × 0.9241
netbeans        x000_revs_x000_added_x_copies         e2063d266acd 6081d72689dc :   0.016988 s,   0.017112 s,  +0.000124 s, × 1.0073
netbeans        x000_revs_x000_added_x000_copies      ff453e9fee32 411350406ec2 :   0.676361 s,   0.660350 s,  -0.016011 s, × 0.9763
netbeans        x0000_revs_xx000_added_x000_copies    588c2d1ced70 1aad62e59ddd :  12.515149 s,  10.032499 s,  -2.482650 s, × 0.8016
mozilla-central x_revs_x_added_0_copies               3697f962bb7b 7015fcdd43a2 :   0.000186 s,   0.000189 s,  +0.000003 s, × 1.0161
mozilla-central x_revs_x000_added_0_copies            dd390860c6c9 40d0c5bed75d :   0.000459 s,   0.000462 s,  +0.000003 s, × 1.0065
mozilla-central x_revs_x_added_x_copies               8d198483ae3b 14207ffc2b2f :   0.000273 s,   0.000270 s,  -0.000003 s, × 0.9890
mozilla-central x_revs_x00_added_x_copies             98cbc58cc6bc 446a150332c3 :   0.001503 s,   0.001474 s,  -0.000029 s, × 0.9807
mozilla-central x_revs_x000_added_x000_copies         3c684b4b8f68 0a5e72d1b479 :   0.004862 s,   0.004806 s,  -0.000056 s, × 0.9885
mozilla-central x_revs_x0000_added_x0000_copies       effb563bb7e5 c07a39dc4e80 :   0.088291 s,   0.085150 s,  -0.003141 s, × 0.9644
mozilla-central x000_revs_xx00_added_0_copies         6100d773079a 04a55431795e :   0.007113 s,   0.007064 s,  -0.000049 s, × 0.9931
mozilla-central x000_revs_x000_added_x_copies         9f17a6fc04f9 2d37b966abed :   0.004687 s,   0.004741 s,  +0.000054 s, × 1.0115
mozilla-central x000_revs_x000_added_x000_copies      7c97034feb78 4407bd0c6330 :   0.198710 s,   0.190133 s,  -0.008577 s, × 0.9568
mozilla-central x0000_revs_xx000_added_0_copies       9eec5917337d 67118cc6dcad :   0.036068 s,   0.035651 s,  -0.000417 s, × 0.9884
mozilla-central x0000_revs_xx000_added_x000_copies    f78c615a656c 96a38b690156 :   0.465362 s,   0.440694 s,  -0.024668 s, × 0.9470
mozilla-central x00000_revs_x0000_added_x0000_copies  6832ae71433c 4c222a1d9a00 :  24.519684 s,  18.454163 s,  -6.065521 s, × 0.7526
mozilla-central x00000_revs_x00000_added_x000_copies  76caed42cf7c 1daa622bbe42 :  42.711897 s,  31.562719 s, -11.149178 s, × 0.7390
mozilla-try     x_revs_x_added_0_copies               aaf6dde0deb8 9790f499805a :   0.001201 s,   0.001189 s,  -0.000012 s, × 0.9900
mozilla-try     x_revs_x000_added_0_copies            d8d0222927b4 5bb8ce8c7450 :   0.001216 s,   0.001204 s,  -0.000012 s, × 0.9901
mozilla-try     x_revs_x_added_x_copies               092fcca11bdb 936255a0384a :   0.000595 s,   0.000586 s,  -0.000009 s, × 0.9849
mozilla-try     x_revs_x00_added_x_copies             b53d2fadbdb5 017afae788ec :   0.001856 s,   0.001845 s,  -0.000011 s, × 0.9941
mozilla-try     x_revs_x000_added_x000_copies         20408ad61ce5 6f0ee96e21ad :   0.064936 s,   0.063822 s,  -0.001114 s, × 0.9828
mozilla-try     x_revs_x0000_added_x0000_copies       effb563bb7e5 c07a39dc4e80 :   0.090601 s,   0.088038 s,  -0.002563 s, × 0.9717
mozilla-try     x000_revs_xx00_added_0_copies         6100d773079a 04a55431795e :   0.007510 s,   0.007389 s,  -0.000121 s, × 0.9839
mozilla-try     x000_revs_x000_added_x_copies         9f17a6fc04f9 2d37b966abed :   0.004911 s,   0.004868 s,  -0.000043 s, × 0.9912
mozilla-try     x000_revs_x000_added_x000_copies      1346fd0130e4 4c65cbdabc1f :   0.233231 s,   0.222450 s,  -0.010781 s, × 0.9538
mozilla-try     x0000_revs_x_added_0_copies           63519bfd42ee a36a2a865d92 :   0.419989 s,   0.370675 s,  -0.049314 s, × 0.8826
mozilla-try     x0000_revs_x_added_x_copies           9fe69ff0762d bcabf2a78927 :   0.401521 s,   0.358020 s,  -0.043501 s, × 0.8917
mozilla-try     x0000_revs_xx000_added_x_copies       156f6e2674f2 4d0f2c178e66 :   0.179555 s,   0.145235 s,  -0.034320 s, × 0.8089
mozilla-try     x0000_revs_xx000_added_0_copies       9eec5917337d 67118cc6dcad :   0.038004 s,   0.037606 s,  -0.000398 s, × 0.9895
mozilla-try     x0000_revs_xx000_added_x000_copies    89294cd501d9 7ccb2fc7ccb5 :  52.838482 s,   7.382439 s, -45.456043 s, × 0.1397
mozilla-try     x0000_revs_x0000_added_x0000_copies   e928c65095ed e951f4ad123a :   8.705874 s,   7.273506 s,  -1.432368 s, × 0.8355
mozilla-try     x00000_revs_x00000_added_0_copies     dc8a3ca7010e d16fde900c9c :   1.126708 s,   1.074593 s,  -0.052115 s, × 0.9537
mozilla-try     x00000_revs_x0000_added_x0000_copies  8d3fafa80d4b eb884023b810 :  83.854020 s,  27.746195 s, -56.107825 s, × 0.3309


Below is a table comparing the runtime of the current "filelog centric"
algorithm, with the "changeset centric" one, we just modified.

The changeset centric algorithm is a significant win in many scenario, but they
are still various cases where it is quite slower. When many revision  has to be
considered the cost of retrieving the copy information, creating new
dictionaries, merging dictionaries and checking if revision are ancestors of
each other can slow things down.

The rest of this series, will introduce a rust version of the copy tracing code
to deal with most of theses issues.


Repo            Case                                  Source-Rev   Dest-Rev         filelog     sidedata      Difference       Factor
---------------------------------------------------------------------------------------------------------------------------------------
mercurial       x_revs_x_added_0_copies               ad6b123de1c7 39cfcef4f463 :  0.000914 s,  0.000044 s, - 0.000870 s,    × 0.048140
mercurial       x_revs_x_added_x_copies               2b1c78674230 0c1d10351869 :  0.001812 s,  0.000138 s, - 0.001674 s,    × 0.076159
mercurial       x000_revs_x000_added_x_copies         81f8ff2a9bf2 dd3267698d84 :  0.017954 s,  0.005052 s, - 0.012902 s,    × 0.281386
pypy            x_revs_x_added_0_copies               aed021ee8ae8 099ed31b181b :  0.001509 s,  0.000219 s, - 0.001290 s,    × 0.145129
pypy            x_revs_x000_added_0_copies            4aa4e1f8e19a 359343b9ac0e :  0.206881 s,  0.000055 s, - 0.206826 s,    × 0.000266
pypy            x_revs_x_added_x_copies               ac52eb7bbbb0 72e022663155 :  0.016951 s,  0.000128 s, - 0.016823 s,    × 0.007551
pypy            x_revs_x00_added_x_copies             c3b14617fbd7 ace7255d9a26 :  0.019096 s,  0.001089 s, - 0.018007 s,    × 0.057028
pypy            x_revs_x000_added_x000_copies         df6f7a526b60 a83dc6a2d56f :  0.762506 s,  0.017407 s, - 0.745099 s,    × 0.022829
pypy            x000_revs_xx00_added_0_copies         89a76aede314 2f22446ff07e :  1.179211 s,  0.094175 s, - 1.085036 s,    × 0.079863
pypy            x000_revs_x000_added_x_copies         8a3b5bfd266e 2c68e87c3efe :  1.249058 s,  0.238009 s, - 1.011049 s,    × 0.190551
pypy            x000_revs_x000_added_x000_copies      89a76aede314 7b3dda341c84 :  1.614107 s,  0.125876 s, - 1.488231 s,    × 0.077985
pypy            x0000_revs_x_added_0_copies           d1defd0dc478 c9cb1334cc78 :  0.001064 s,  3.581556 s, + 3.580492 s, × 3366.124060
pypy            x0000_revs_xx000_added_0_copies       bf2c629d0071 4ffed77c095c :  1.061275 s,  0.016721 s, - 1.044554 s,    × 0.015756
pypy            x0000_revs_xx000_added_x000_copies    08ea3258278e d9fa043f30c0 :  1.341119 s,  0.242367 s, - 1.098752 s,    × 0.180720
netbeans        x_revs_x_added_0_copies               fb0955ffcbcd a01e9239f9e7 :  0.027803 s,  0.000165 s, - 0.027638 s,    × 0.005935
netbeans        x_revs_x000_added_0_copies            6f360122949f 20eb231cc7d0 :  0.130014 s,  0.000114 s, - 0.129900 s,    × 0.000877
netbeans        x_revs_x_added_x_copies               1ada3faf6fb6 5a39d12eecf4 :  0.024990 s,  0.000296 s, - 0.024694 s,    × 0.011845
netbeans        x_revs_x00_added_x_copies             35be93ba1e2c 9eec5e90c05f :  0.052201 s,  0.001124 s, - 0.051077 s,    × 0.021532
netbeans        x000_revs_xx00_added_0_copies         eac3045b4fdd 51d4ae7f1290 :  0.037642 s,  0.013060 s, - 0.024582 s,    × 0.346953
netbeans        x000_revs_x000_added_x_copies         e2063d266acd 6081d72689dc :  0.197086 s,  0.017112 s, - 0.179974 s,    × 0.086825
netbeans        x000_revs_x000_added_x000_copies      ff453e9fee32 411350406ec2 :  0.935148 s,  0.660350 s, - 0.274798 s,    × 0.706145
netbeans        x0000_revs_xx000_added_x000_copies    588c2d1ced70 1aad62e59ddd :  3.920674 s, 10.032499 s, + 6.111825 s,    × 2.558871
mozilla-central x_revs_x_added_0_copies               3697f962bb7b 7015fcdd43a2 :  0.024232 s,  0.000189 s, - 0.024043 s,    × 0.007800
mozilla-central x_revs_x000_added_0_copies            dd390860c6c9 40d0c5bed75d :  0.141483 s,  0.000462 s, - 0.141021 s,    × 0.003265
mozilla-central x_revs_x_added_x_copies               8d198483ae3b 14207ffc2b2f :  0.025775 s,  0.000270 s, - 0.025505 s,    × 0.010475
mozilla-central x_revs_x00_added_x_copies             98cbc58cc6bc 446a150332c3 :  0.084922 s,  0.001474 s, - 0.083448 s,    × 0.017357
mozilla-central x_revs_x000_added_x000_copies         3c684b4b8f68 0a5e72d1b479 :  0.194784 s,  0.004806 s, - 0.189978 s,    × 0.024673
mozilla-central x_revs_x0000_added_x0000_copies       effb563bb7e5 c07a39dc4e80 :  2.161103 s,  0.085150 s, - 2.075953 s,    × 0.039401
mozilla-central x000_revs_xx00_added_0_copies         6100d773079a 04a55431795e :  0.089347 s,  0.007064 s, - 0.082283 s,    × 0.079063
mozilla-central x000_revs_x000_added_x_copies         9f17a6fc04f9 2d37b966abed :  0.732171 s,  0.004741 s, - 0.727430 s,    × 0.006475
mozilla-central x000_revs_x000_added_x000_copies      7c97034feb78 4407bd0c6330 :  1.157287 s,  0.190133 s, - 0.967154 s,    × 0.164292
mozilla-central x0000_revs_xx000_added_0_copies       9eec5917337d 67118cc6dcad :  6.726568 s,  0.035651 s, - 6.690917 s,    × 0.005300
mozilla-central x0000_revs_xx000_added_x000_copies    f78c615a656c 96a38b690156 :  3.266229 s,  0.440694 s, - 2.825535 s,    × 0.134924
mozilla-central x00000_revs_x0000_added_x0000_copies  6832ae71433c 4c222a1d9a00 : 15.860534 s, 18.454163 s, + 2.593629 s,    × 1.163527
mozilla-central x00000_revs_x00000_added_x000_copies  76caed42cf7c 1daa622bbe42 : 20.450475 s, 31.562719 s, +11.112244 s,    × 1.543373
mozilla-try     x_revs_x_added_0_copies               aaf6dde0deb8 9790f499805a :  0.080442 s,  0.001189 s, - 0.079253 s,    × 0.014781
mozilla-try     x_revs_x000_added_0_copies            d8d0222927b4 5bb8ce8c7450 :  0.497672 s,  0.001204 s, - 0.496468 s,    × 0.002419
mozilla-try     x_revs_x_added_x_copies               092fcca11bdb 936255a0384a :  0.021183 s,  0.000586 s, - 0.020597 s,    × 0.027664
mozilla-try     x_revs_x00_added_x_copies             b53d2fadbdb5 017afae788ec :  0.230991 s,  0.001845 s, - 0.229146 s,    × 0.007987
mozilla-try     x_revs_x000_added_x000_copies         20408ad61ce5 6f0ee96e21ad :  1.118461 s,  0.063822 s, - 1.054639 s,    × 0.057062
mozilla-try     x_revs_x0000_added_x0000_copies       effb563bb7e5 c07a39dc4e80 :  2.206083 s,  0.088038 s, - 2.118045 s,    × 0.039907
mozilla-try     x000_revs_xx00_added_0_copies         6100d773079a 04a55431795e :  0.089404 s,  0.007389 s, - 0.082015 s,    × 0.082647
mozilla-try     x000_revs_x000_added_x_copies         9f17a6fc04f9 2d37b966abed :  0.733043 s,  0.004868 s, - 0.728175 s,    × 0.006641
mozilla-try     x000_revs_x000_added_x000_copies      1346fd0130e4 4c65cbdabc1f :  1.163367 s,  0.222450 s, - 0.940917 s,    × 0.191212
mozilla-try     x0000_revs_x_added_0_copies           63519bfd42ee a36a2a865d92 :  0.085456 s,  0.370675 s, + 0.285219 s,    × 4.337612
mozilla-try     x0000_revs_x_added_x_copies           9fe69ff0762d bcabf2a78927 :  0.083601 s,  0.358020 s, + 0.274419 s,    × 4.282485
mozilla-try     x0000_revs_xx000_added_x_copies       156f6e2674f2 4d0f2c178e66 :  7.366614 s,  0.145235 s, - 7.221379 s,    × 0.019715
mozilla-try     x0000_revs_xx000_added_0_copies       9eec5917337d 67118cc6dcad :  6.664464 s,  0.037606 s, - 6.626858 s,    × 0.005643
mozilla-try     x0000_revs_xx000_added_x000_copies    89294cd501d9 7ccb2fc7ccb5 :  7.467836 s,  7.382439 s, - 0.085397 s,    × 0.988565
mozilla-try     x0000_revs_x0000_added_x0000_copies   e928c65095ed e951f4ad123a :  9.801294 s,  7.273506 s, - 2.527788 s,    × 0.742097
mozilla-try     x00000_revs_x_added_0_copies          6a320851d377 1ebb79acd503 :  0.091886 s, killed
mozilla-try     x00000_revs_x00000_added_0_copies     dc8a3ca7010e d16fde900c9c : 26.491140 s,  1.074593 s, -25.416547 s,    × 0.040564
mozilla-try     x00000_revs_x_added_x_copies          5173c4b6f97c 95d83ee7242d :  0.092863 s, killed
mozilla-try     x00000_revs_x000_added_x_copies       9126823d0e9c ca82787bb23c :  0.226823 s, killed
mozilla-try     x00000_revs_x0000_added_x0000_copies  8d3fafa80d4b eb884023b810 : 18.914630 s, 27.746195 s, + 8.831565 s,    × 1.466917
mozilla-try     x00000_revs_x00000_added_x0000_copies 1b661134e2ca 1ae03d022d6d : 21.198903 s, killed
mozilla-try     x00000_revs_x00000_added_x000_copies  9b2a99adc05e 8e29777b48e6 : 24.952268 s, killed

Differential Revision: https://phab.mercurial-scm.org/D9296

# debugcommands.py - command processing for debug* commands
#
# Copyright 2005-2016 Matt Mackall <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from __future__ import absolute_import

import codecs
import collections
import difflib
import errno
import glob
import operator
import os
import platform
import random
import re
import socket
import ssl
import stat
import string
import subprocess
import sys
import time

from .i18n import _
from .node import (
    bin,
    hex,
    nullid,
    nullrev,
    short,
)
from .pycompat import (
    getattr,
    open,
)
from . import (
    bundle2,
    bundlerepo,
    changegroup,
    cmdutil,
    color,
    context,
    copies,
    dagparser,
    encoding,
    error,
    exchange,
    extensions,
    filemerge,
    filesetlang,
    formatter,
    hg,
    httppeer,
    localrepo,
    lock as lockmod,
    logcmdutil,
    mergestate as mergestatemod,
    metadata,
    obsolete,
    obsutil,
    pathutil,
    phases,
    policy,
    pvec,
    pycompat,
    registrar,
    repair,
    revlog,
    revset,
    revsetlang,
    scmutil,
    setdiscovery,
    simplemerge,
    sshpeer,
    sslutil,
    streamclone,
    strip,
    tags as tagsmod,
    templater,
    treediscovery,
    upgrade,
    url as urlmod,
    util,
    vfs as vfsmod,
    wireprotoframing,
    wireprotoserver,
    wireprotov2peer,
)
from .utils import (
    cborutil,
    compression,
    dateutil,
    procutil,
    stringutil,
)

from .revlogutils import (
    deltas as deltautil,
    nodemap,
    sidedata,
)

release = lockmod.release

table = {}
table.update(strip.command._table)
command = registrar.command(table)


@command(b'debugancestor', [], _(b'[INDEX] REV1 REV2'), optionalrepo=True)
def debugancestor(ui, repo, *args):
    """find the ancestor revision of two revisions in a given index"""
    if len(args) == 3:
        index, rev1, rev2 = args
        r = revlog.revlog(vfsmod.vfs(encoding.getcwd(), audit=False), index)
        lookup = r.lookup
    elif len(args) == 2:
        if not repo:
            raise error.Abort(
                _(b'there is no Mercurial repository here (.hg not found)')
            )
        rev1, rev2 = args
        r = repo.changelog
        lookup = repo.lookup
    else:
        raise error.Abort(_(b'either two or three arguments required'))
    a = r.ancestor(lookup(rev1), lookup(rev2))
    ui.write(b'%d:%s\n' % (r.rev(a), hex(a)))


@command(b'debugantivirusrunning', [])
def debugantivirusrunning(ui, repo):
    """attempt to trigger an antivirus scanner to see if one is active"""
    with repo.cachevfs.open('eicar-test-file.com', b'wb') as f:
        f.write(
            util.b85decode(
                # This is a base85-armored version of the EICAR test file. See
                # https://en.wikipedia.org/wiki/EICAR_test_file for details.
                b'ST#=}P$fV?P+K%yP+C|uG$>GBDK|qyDK~v2MM*<JQY}+dK~6+LQba95P'
                b'E<)&Nm5l)EmTEQR4qnHOhq9iNGnJx'
            )
        )
    # Give an AV engine time to scan the file.
    time.sleep(2)
    util.unlink(repo.cachevfs.join('eicar-test-file.com'))


@command(b'debugapplystreamclonebundle', [], b'FILE')
def debugapplystreamclonebundle(ui, repo, fname):
    """apply a stream clone bundle file"""
    f = hg.openpath(ui, fname)
    gen = exchange.readbundle(ui, f, fname)
    gen.apply(repo)


@command(
    b'debugbuilddag',
    [
        (
            b'm',
            b'mergeable-file',
            None,
            _(b'add single file mergeable changes'),
        ),
        (
            b'o',
            b'overwritten-file',
            None,
            _(b'add single file all revs overwrite'),
        ),
        (b'n', b'new-file', None, _(b'add new file at each rev')),
    ],
    _(b'[OPTION]... [TEXT]'),
)
def debugbuilddag(
    ui,
    repo,
    text=None,
    mergeable_file=False,
    overwritten_file=False,
    new_file=False,
):
    """builds a repo with a given DAG from scratch in the current empty repo

    The description of the DAG is read from stdin if not given on the
    command line.

    Elements:

     - "+n" is a linear run of n nodes based on the current default parent
     - "." is a single node based on the current default parent
     - "$" resets the default parent to null (implied at the start);
           otherwise the default parent is always the last node created
     - "<p" sets the default parent to the backref p
     - "*p" is a fork at parent p, which is a backref
     - "*p1/p2" is a merge of parents p1 and p2, which are backrefs
     - "/p2" is a merge of the preceding node and p2
     - ":tag" defines a local tag for the preceding node
     - "@branch" sets the named branch for subsequent nodes
     - "#...\\n" is a comment up to the end of the line

    Whitespace between the above elements is ignored.

    A backref is either

     - a number n, which references the node curr-n, where curr is the current
       node, or
     - the name of a local tag you placed earlier using ":tag", or
     - empty to denote the default parent.

    All string valued-elements are either strictly alphanumeric, or must
    be enclosed in double quotes ("..."), with "\\" as escape character.
    """

    if text is None:
        ui.status(_(b"reading DAG from stdin\n"))
        text = ui.fin.read()

    cl = repo.changelog
    if len(cl) > 0:
        raise error.Abort(_(b'repository is not empty'))

    # determine number of revs in DAG
    total = 0
    for type, data in dagparser.parsedag(text):
        if type == b'n':
            total += 1

    if mergeable_file:
        linesperrev = 2
        # make a file with k lines per rev
        initialmergedlines = [
            b'%d' % i for i in pycompat.xrange(0, total * linesperrev)
        ]
        initialmergedlines.append(b"")

    tags = []
    progress = ui.makeprogress(
        _(b'building'), unit=_(b'revisions'), total=total
    )
    with progress, repo.wlock(), repo.lock(), repo.transaction(b"builddag"):
        at = -1
        atbranch = b'default'
        nodeids = []
        id = 0
        progress.update(id)
        for type, data in dagparser.parsedag(text):
            if type == b'n':
                ui.note((b'node %s\n' % pycompat.bytestr(data)))
                id, ps = data

                files = []
                filecontent = {}

                p2 = None
                if mergeable_file:
                    fn = b"mf"
                    p1 = repo[ps[0]]
                    if len(ps) > 1:
                        p2 = repo[ps[1]]
                        pa = p1.ancestor(p2)
                        base, local, other = [
                            x[fn].data() for x in (pa, p1, p2)
                        ]
                        m3 = simplemerge.Merge3Text(base, local, other)
                        ml = [l.strip() for l in m3.merge_lines()]
                        ml.append(b"")
                    elif at > 0:
                        ml = p1[fn].data().split(b"\n")
                    else:
                        ml = initialmergedlines
                    ml[id * linesperrev] += b" r%i" % id
                    mergedtext = b"\n".join(ml)
                    files.append(fn)
                    filecontent[fn] = mergedtext

                if overwritten_file:
                    fn = b"of"
                    files.append(fn)
                    filecontent[fn] = b"r%i\n" % id

                if new_file:
                    fn = b"nf%i" % id
                    files.append(fn)
                    filecontent[fn] = b"r%i\n" % id
                    if len(ps) > 1:
                        if not p2:
                            p2 = repo[ps[1]]
                        for fn in p2:
                            if fn.startswith(b"nf"):
                                files.append(fn)
                                filecontent[fn] = p2[fn].data()

                def fctxfn(repo, cx, path):
                    if path in filecontent:
                        return context.memfilectx(
                            repo, cx, path, filecontent[path]
                        )
                    return None

                if len(ps) == 0 or ps[0] < 0:
                    pars = [None, None]
                elif len(ps) == 1:
                    pars = [nodeids[ps[0]], None]
                else:
                    pars = [nodeids[p] for p in ps]
                cx = context.memctx(
                    repo,
                    pars,
                    b"r%i" % id,
                    files,
                    fctxfn,
                    date=(id, 0),
                    user=b"debugbuilddag",
                    extra={b'branch': atbranch},
                )
                nodeid = repo.commitctx(cx)
                nodeids.append(nodeid)
                at = id
            elif type == b'l':
                id, name = data
                ui.note((b'tag %s\n' % name))
                tags.append(b"%s %s\n" % (hex(repo.changelog.node(id)), name))
            elif type == b'a':
                ui.note((b'branch %s\n' % data))
                atbranch = data
            progress.update(id)

        if tags:
            repo.vfs.write(b"localtags", b"".join(tags))


def _debugchangegroup(ui, gen, all=None, indent=0, **opts):
    indent_string = b' ' * indent
    if all:
        ui.writenoi18n(
            b"%sformat: id, p1, p2, cset, delta base, len(delta)\n"
            % indent_string
        )

        def showchunks(named):
            ui.write(b"\n%s%s\n" % (indent_string, named))
            for deltadata in gen.deltaiter():
                node, p1, p2, cs, deltabase, delta, flags = deltadata
                ui.write(
                    b"%s%s %s %s %s %s %d\n"
                    % (
                        indent_string,
                        hex(node),
                        hex(p1),
                        hex(p2),
                        hex(cs),
                        hex(deltabase),
                        len(delta),
                    )
                )

        gen.changelogheader()
        showchunks(b"changelog")
        gen.manifestheader()
        showchunks(b"manifest")
        for chunkdata in iter(gen.filelogheader, {}):
            fname = chunkdata[b'filename']
            showchunks(fname)
    else:
        if isinstance(gen, bundle2.unbundle20):
            raise error.Abort(_(b'use debugbundle2 for this file'))
        gen.changelogheader()
        for deltadata in gen.deltaiter():
            node, p1, p2, cs, deltabase, delta, flags = deltadata
            ui.write(b"%s%s\n" % (indent_string, hex(node)))


def _debugobsmarkers(ui, part, indent=0, **opts):
    """display version and markers contained in 'data'"""
    opts = pycompat.byteskwargs(opts)
    data = part.read()
    indent_string = b' ' * indent
    try:
        version, markers = obsolete._readmarkers(data)
    except error.UnknownVersion as exc:
        msg = b"%sunsupported version: %s (%d bytes)\n"
        msg %= indent_string, exc.version, len(data)
        ui.write(msg)
    else:
        msg = b"%sversion: %d (%d bytes)\n"
        msg %= indent_string, version, len(data)
        ui.write(msg)
        fm = ui.formatter(b'debugobsolete', opts)
        for rawmarker in sorted(markers):
            m = obsutil.marker(None, rawmarker)
            fm.startitem()
            fm.plain(indent_string)
            cmdutil.showmarker(fm, m)
        fm.end()


def _debugphaseheads(ui, data, indent=0):
    """display version and markers contained in 'data'"""
    indent_string = b' ' * indent
    headsbyphase = phases.binarydecode(data)
    for phase in phases.allphases:
        for head in headsbyphase[phase]:
            ui.write(indent_string)
            ui.write(b'%s %s\n' % (hex(head), phases.phasenames[phase]))


def _quasirepr(thing):
    if isinstance(thing, (dict, util.sortdict, collections.OrderedDict)):
        return b'{%s}' % (
            b', '.join(b'%s: %s' % (k, thing[k]) for k in sorted(thing))
        )
    return pycompat.bytestr(repr(thing))


def _debugbundle2(ui, gen, all=None, **opts):
    """lists the contents of a bundle2"""
    if not isinstance(gen, bundle2.unbundle20):
        raise error.Abort(_(b'not a bundle2 file'))
    ui.write((b'Stream params: %s\n' % _quasirepr(gen.params)))
    parttypes = opts.get('part_type', [])
    for part in gen.iterparts():
        if parttypes and part.type not in parttypes:
            continue
        msg = b'%s -- %s (mandatory: %r)\n'
        ui.write((msg % (part.type, _quasirepr(part.params), part.mandatory)))
        if part.type == b'changegroup':
            version = part.params.get(b'version', b'01')
            cg = changegroup.getunbundler(version, part, b'UN')
            if not ui.quiet:
                _debugchangegroup(ui, cg, all=all, indent=4, **opts)
        if part.type == b'obsmarkers':
            if not ui.quiet:
                _debugobsmarkers(ui, part, indent=4, **opts)
        if part.type == b'phase-heads':
            if not ui.quiet:
                _debugphaseheads(ui, part, indent=4)


@command(
    b'debugbundle',
    [
        (b'a', b'all', None, _(b'show all details')),
        (b'', b'part-type', [], _(b'show only the named part type')),
        (b'', b'spec', None, _(b'print the bundlespec of the bundle')),
    ],
    _(b'FILE'),
    norepo=True,
)
def debugbundle(ui, bundlepath, all=None, spec=None, **opts):
    """lists the contents of a bundle"""
    with hg.openpath(ui, bundlepath) as f:
        if spec:
            spec = exchange.getbundlespec(ui, f)
            ui.write(b'%s\n' % spec)
            return

        gen = exchange.readbundle(ui, f, bundlepath)
        if isinstance(gen, bundle2.unbundle20):
            return _debugbundle2(ui, gen, all=all, **opts)
        _debugchangegroup(ui, gen, all=all, **opts)


@command(b'debugcapabilities', [], _(b'PATH'), norepo=True)
def debugcapabilities(ui, path, **opts):
    """lists the capabilities of a remote peer"""
    opts = pycompat.byteskwargs(opts)
    peer = hg.peer(ui, opts, path)
    caps = peer.capabilities()
    ui.writenoi18n(b'Main capabilities:\n')
    for c in sorted(caps):
        ui.write(b'  %s\n' % c)
    b2caps = bundle2.bundle2caps(peer)
    if b2caps:
        ui.writenoi18n(b'Bundle2 capabilities:\n')
        for key, values in sorted(pycompat.iteritems(b2caps)):
            ui.write(b'  %s\n' % key)
            for v in values:
                ui.write(b'    %s\n' % v)


@command(b'debugchangedfiles', [], b'REV')
def debugchangedfiles(ui, repo, rev):
    """list the stored files changes for a revision"""
    ctx = scmutil.revsingle(repo, rev, None)
    sd = repo.changelog.sidedata(ctx.rev())
    files_block = sd.get(sidedata.SD_FILES)
    if files_block is not None:
        files = metadata.decode_files_sidedata(sd)
        for f in sorted(files.touched):
            if f in files.added:
                action = b"added"
            elif f in files.removed:
                action = b"removed"
            elif f in files.merged:
                action = b"merged"
            elif f in files.salvaged:
                action = b"salvaged"
            else:
                action = b"touched"

            copy_parent = b""
            copy_source = b""
            if f in files.copied_from_p1:
                copy_parent = b"p1"
                copy_source = files.copied_from_p1[f]
            elif f in files.copied_from_p2:
                copy_parent = b"p2"
                copy_source = files.copied_from_p2[f]

            data = (action, copy_parent, f, copy_source)
            template = b"%-8s %2s: %s, %s;\n"
            ui.write(template % data)


@command(b'debugcheckstate', [], b'')
def debugcheckstate(ui, repo):
    """validate the correctness of the current dirstate"""
    parent1, parent2 = repo.dirstate.parents()
    m1 = repo[parent1].manifest()
    m2 = repo[parent2].manifest()
    errors = 0
    for f in repo.dirstate:
        state = repo.dirstate[f]
        if state in b"nr" and f not in m1:
            ui.warn(_(b"%s in state %s, but not in manifest1\n") % (f, state))
            errors += 1
        if state in b"a" and f in m1:
            ui.warn(_(b"%s in state %s, but also in manifest1\n") % (f, state))
            errors += 1
        if state in b"m" and f not in m1 and f not in m2:
            ui.warn(
                _(b"%s in state %s, but not in either manifest\n") % (f, state)
            )
            errors += 1
    for f in m1:
        state = repo.dirstate[f]
        if state not in b"nrm":
            ui.warn(_(b"%s in manifest1, but listed as state %s") % (f, state))
            errors += 1
    if errors:
        errstr = _(b".hg/dirstate inconsistent with current parent's manifest")
        raise error.Abort(errstr)


@command(
    b'debugcolor',
    [(b'', b'style', None, _(b'show all configured styles'))],
    b'hg debugcolor',
)
def debugcolor(ui, repo, **opts):
    """show available color, effects or style"""
    ui.writenoi18n(b'color mode: %s\n' % stringutil.pprint(ui._colormode))
    if opts.get('style'):
        return _debugdisplaystyle(ui)
    else:
        return _debugdisplaycolor(ui)


def _debugdisplaycolor(ui):
    ui = ui.copy()
    ui._styles.clear()
    for effect in color._activeeffects(ui).keys():
        ui._styles[effect] = effect
    if ui._terminfoparams:
        for k, v in ui.configitems(b'color'):
            if k.startswith(b'color.'):
                ui._styles[k] = k[6:]
            elif k.startswith(b'terminfo.'):
                ui._styles[k] = k[9:]
    ui.write(_(b'available colors:\n'))
    # sort label with a '_' after the other to group '_background' entry.
    items = sorted(ui._styles.items(), key=lambda i: (b'_' in i[0], i[0], i[1]))
    for colorname, label in items:
        ui.write(b'%s\n' % colorname, label=label)


def _debugdisplaystyle(ui):
    ui.write(_(b'available style:\n'))
    if not ui._styles:
        return
    width = max(len(s) for s in ui._styles)
    for label, effects in sorted(ui._styles.items()):
        ui.write(b'%s' % label, label=label)
        if effects:
            # 50
            ui.write(b': ')
            ui.write(b' ' * (max(0, width - len(label))))
            ui.write(b', '.join(ui.label(e, e) for e in effects.split()))
        ui.write(b'\n')


@command(b'debugcreatestreamclonebundle', [], b'FILE')
def debugcreatestreamclonebundle(ui, repo, fname):
    """create a stream clone bundle file

    Stream bundles are special bundles that are essentially archives of
    revlog files. They are commonly used for cloning very quickly.
    """
    # TODO we may want to turn this into an abort when this functionality
    # is moved into `hg bundle`.
    if phases.hassecret(repo):
        ui.warn(
            _(
                b'(warning: stream clone bundle will contain secret '
                b'revisions)\n'
            )
        )

    requirements, gen = streamclone.generatebundlev1(repo)
    changegroup.writechunks(ui, gen, fname)

    ui.write(_(b'bundle requirements: %s\n') % b', '.join(sorted(requirements)))


@command(
    b'debugdag',
    [
        (b't', b'tags', None, _(b'use tags as labels')),
        (b'b', b'branches', None, _(b'annotate with branch names')),
        (b'', b'dots', None, _(b'use dots for runs')),
        (b's', b'spaces', None, _(b'separate elements by spaces')),
    ],
    _(b'[OPTION]... [FILE [REV]...]'),
    optionalrepo=True,
)
def debugdag(ui, repo, file_=None, *revs, **opts):
    """format the changelog or an index DAG as a concise textual description

    If you pass a revlog index, the revlog's DAG is emitted. If you list
    revision numbers, they get labeled in the output as rN.

    Otherwise, the changelog DAG of the current repo is emitted.
    """
    spaces = opts.get('spaces')
    dots = opts.get('dots')
    if file_:
        rlog = revlog.revlog(vfsmod.vfs(encoding.getcwd(), audit=False), file_)
        revs = {int(r) for r in revs}

        def events():
            for r in rlog:
                yield b'n', (r, list(p for p in rlog.parentrevs(r) if p != -1))
                if r in revs:
                    yield b'l', (r, b"r%i" % r)

    elif repo:
        cl = repo.changelog
        tags = opts.get('tags')
        branches = opts.get('branches')
        if tags:
            labels = {}
            for l, n in repo.tags().items():
                labels.setdefault(cl.rev(n), []).append(l)

        def events():
            b = b"default"
            for r in cl:
                if branches:
                    newb = cl.read(cl.node(r))[5][b'branch']
                    if newb != b:
                        yield b'a', newb
                        b = newb
                yield b'n', (r, list(p for p in cl.parentrevs(r) if p != -1))
                if tags:
                    ls = labels.get(r)
                    if ls:
                        for l in ls:
                            yield b'l', (r, l)

    else:
        raise error.Abort(_(b'need repo for changelog dag'))

    for line in dagparser.dagtextlines(
        events(),
        addspaces=spaces,
        wraplabels=True,
        wrapannotations=True,
        wrapnonlinear=dots,
        usedots=dots,
        maxlinewidth=70,
    ):
        ui.write(line)
        ui.write(b"\n")


@command(b'debugdata', cmdutil.debugrevlogopts, _(b'-c|-m|FILE REV'))
def debugdata(ui, repo, file_, rev=None, **opts):
    """dump the contents of a data file revision"""
    opts = pycompat.byteskwargs(opts)
    if opts.get(b'changelog') or opts.get(b'manifest') or opts.get(b'dir'):
        if rev is not None:
            raise error.CommandError(b'debugdata', _(b'invalid arguments'))
        file_, rev = None, file_
    elif rev is None:
        raise error.CommandError(b'debugdata', _(b'invalid arguments'))
    r = cmdutil.openstorage(repo, b'debugdata', file_, opts)
    try:
        ui.write(r.rawdata(r.lookup(rev)))
    except KeyError:
        raise error.Abort(_(b'invalid revision identifier %s') % rev)


@command(
    b'debugdate',
    [(b'e', b'extended', None, _(b'try extended date formats'))],
    _(b'[-e] DATE [RANGE]'),
    norepo=True,
    optionalrepo=True,
)
def debugdate(ui, date, range=None, **opts):
    """parse and display a date"""
    if opts["extended"]:
        d = dateutil.parsedate(date, dateutil.extendeddateformats)
    else:
        d = dateutil.parsedate(date)
    ui.writenoi18n(b"internal: %d %d\n" % d)
    ui.writenoi18n(b"standard: %s\n" % dateutil.datestr(d))
    if range:
        m = dateutil.matchdate(range)
        ui.writenoi18n(b"match: %s\n" % m(d[0]))


@command(
    b'debugdeltachain',
    cmdutil.debugrevlogopts + cmdutil.formatteropts,
    _(b'-c|-m|FILE'),
    optionalrepo=True,
)
def debugdeltachain(ui, repo, file_=None, **opts):
    """dump information about delta chains in a revlog

    Output can be templatized. Available template keywords are:

    :``rev``:       revision number
    :``chainid``:   delta chain identifier (numbered by unique base)
    :``chainlen``:  delta chain length to this revision
    :``prevrev``:   previous revision in delta chain
    :``deltatype``: role of delta / how it was computed
    :``compsize``:  compressed size of revision
    :``uncompsize``: uncompressed size of revision
    :``chainsize``: total size of compressed revisions in chain
    :``chainratio``: total chain size divided by uncompressed revision size
                    (new delta chains typically start at ratio 2.00)
    :``lindist``:   linear distance from base revision in delta chain to end
                    of this revision
    :``extradist``: total size of revisions not part of this delta chain from
                    base of delta chain to end of this revision; a measurement
                    of how much extra data we need to read/seek across to read
                    the delta chain for this revision
    :``extraratio``: extradist divided by chainsize; another representation of
                    how much unrelated data is needed to load this delta chain

    If the repository is configured to use the sparse read, additional keywords
    are available:

    :``readsize``:     total size of data read from the disk for a revision
                       (sum of the sizes of all the blocks)
    :``largestblock``: size of the largest block of data read from the disk
    :``readdensity``:  density of useful bytes in the data read from the disk
    :``srchunks``:  in how many data hunks the whole revision would be read

    The sparse read can be enabled with experimental.sparse-read = True
    """
    opts = pycompat.byteskwargs(opts)
    r = cmdutil.openrevlog(repo, b'debugdeltachain', file_, opts)
    index = r.index
    start = r.start
    length = r.length
    generaldelta = r.version & revlog.FLAG_GENERALDELTA
    withsparseread = getattr(r, '_withsparseread', False)

    def revinfo(rev):
        e = index[rev]
        compsize = e[1]
        uncompsize = e[2]
        chainsize = 0

        if generaldelta:
            if e[3] == e[5]:
                deltatype = b'p1'
            elif e[3] == e[6]:
                deltatype = b'p2'
            elif e[3] == rev - 1:
                deltatype = b'prev'
            elif e[3] == rev:
                deltatype = b'base'
            else:
                deltatype = b'other'
        else:
            if e[3] == rev:
                deltatype = b'base'
            else:
                deltatype = b'prev'

        chain = r._deltachain(rev)[0]
        for iterrev in chain:
            e = index[iterrev]
            chainsize += e[1]

        return compsize, uncompsize, deltatype, chain, chainsize

    fm = ui.formatter(b'debugdeltachain', opts)

    fm.plain(
        b'    rev  chain# chainlen     prev   delta       '
        b'size    rawsize  chainsize     ratio   lindist extradist '
        b'extraratio'
    )
    if withsparseread:
        fm.plain(b'   readsize largestblk rddensity srchunks')
    fm.plain(b'\n')

    chainbases = {}
    for rev in r:
        comp, uncomp, deltatype, chain, chainsize = revinfo(rev)
        chainbase = chain[0]
        chainid = chainbases.setdefault(chainbase, len(chainbases) + 1)
        basestart = start(chainbase)
        revstart = start(rev)
        lineardist = revstart + comp - basestart
        extradist = lineardist - chainsize
        try:
            prevrev = chain[-2]
        except IndexError:
            prevrev = -1

        if uncomp != 0:
            chainratio = float(chainsize) / float(uncomp)
        else:
            chainratio = chainsize

        if chainsize != 0:
            extraratio = float(extradist) / float(chainsize)
        else:
            extraratio = extradist

        fm.startitem()
        fm.write(
            b'rev chainid chainlen prevrev deltatype compsize '
            b'uncompsize chainsize chainratio lindist extradist '
            b'extraratio',
            b'%7d %7d %8d %8d %7s %10d %10d %10d %9.5f %9d %9d %10.5f',
            rev,
            chainid,
            len(chain),
            prevrev,
            deltatype,
            comp,
            uncomp,
            chainsize,
            chainratio,
            lineardist,
            extradist,
            extraratio,
            rev=rev,
            chainid=chainid,
            chainlen=len(chain),
            prevrev=prevrev,
            deltatype=deltatype,
            compsize=comp,
            uncompsize=uncomp,
            chainsize=chainsize,
            chainratio=chainratio,
            lindist=lineardist,
            extradist=extradist,
            extraratio=extraratio,
        )
        if withsparseread:
            readsize = 0
            largestblock = 0
            srchunks = 0

            for revschunk in deltautil.slicechunk(r, chain):
                srchunks += 1
                blkend = start(revschunk[-1]) + length(revschunk[-1])
                blksize = blkend - start(revschunk[0])

                readsize += blksize
                if largestblock < blksize:
                    largestblock = blksize

            if readsize:
                readdensity = float(chainsize) / float(readsize)
            else:
                readdensity = 1

            fm.write(
                b'readsize largestblock readdensity srchunks',
                b' %10d %10d %9.5f %8d',
                readsize,
                largestblock,
                readdensity,
                srchunks,
                readsize=readsize,
                largestblock=largestblock,
                readdensity=readdensity,
                srchunks=srchunks,
            )

        fm.plain(b'\n')

    fm.end()


@command(
    b'debugdirstate|debugstate',
    [
        (
            b'',
            b'nodates',
            None,
            _(b'do not display the saved mtime (DEPRECATED)'),
        ),
        (b'', b'dates', True, _(b'display the saved mtime')),
        (b'', b'datesort', None, _(b'sort by saved mtime')),
    ],
    _(b'[OPTION]...'),
)
def debugstate(ui, repo, **opts):
    """show the contents of the current dirstate"""

    nodates = not opts['dates']
    if opts.get('nodates') is not None:
        nodates = True
    datesort = opts.get('datesort')

    if datesort:
        keyfunc = lambda x: (x[1][3], x[0])  # sort by mtime, then by filename
    else:
        keyfunc = None  # sort by filename
    for file_, ent in sorted(pycompat.iteritems(repo.dirstate), key=keyfunc):
        if ent[3] == -1:
            timestr = b'unset               '
        elif nodates:
            timestr = b'set                 '
        else:
            timestr = time.strftime(
                "%Y-%m-%d %H:%M:%S ", time.localtime(ent[3])
            )
            timestr = encoding.strtolocal(timestr)
        if ent[1] & 0o20000:
            mode = b'lnk'
        else:
            mode = b'%3o' % (ent[1] & 0o777 & ~util.umask)
        ui.write(b"%c %s %10d %s%s\n" % (ent[0], mode, ent[2], timestr, file_))
    for f in repo.dirstate.copies():
        ui.write(_(b"copy: %s -> %s\n") % (repo.dirstate.copied(f), f))


@command(
    b'debugdiscovery',
    [
        (b'', b'old', None, _(b'use old-style discovery')),
        (
            b'',
            b'nonheads',
            None,
            _(b'use old-style discovery with non-heads included'),
        ),
        (b'', b'rev', [], b'restrict discovery to this set of revs'),
        (b'', b'seed', b'12323', b'specify the random seed use for discovery'),
    ]
    + cmdutil.remoteopts,
    _(b'[--rev REV] [OTHER]'),
)
def debugdiscovery(ui, repo, remoteurl=b"default", **opts):
    """runs the changeset discovery protocol in isolation"""
    opts = pycompat.byteskwargs(opts)
    remoteurl, branches = hg.parseurl(ui.expandpath(remoteurl))
    remote = hg.peer(repo, opts, remoteurl)
    ui.status(_(b'comparing with %s\n') % util.hidepassword(remoteurl))

    # make sure tests are repeatable
    random.seed(int(opts[b'seed']))

    if opts.get(b'old'):

        def doit(pushedrevs, remoteheads, remote=remote):
            if not util.safehasattr(remote, b'branches'):
                # enable in-client legacy support
                remote = localrepo.locallegacypeer(remote.local())
            common, _in, hds = treediscovery.findcommonincoming(
                repo, remote, force=True
            )
            common = set(common)
            if not opts.get(b'nonheads'):
                ui.writenoi18n(
                    b"unpruned common: %s\n"
                    % b" ".join(sorted(short(n) for n in common))
                )

                clnode = repo.changelog.node
                common = repo.revs(b'heads(::%ln)', common)
                common = {clnode(r) for r in common}
            return common, hds

    else:

        def doit(pushedrevs, remoteheads, remote=remote):
            nodes = None
            if pushedrevs:
                revs = scmutil.revrange(repo, pushedrevs)
                nodes = [repo[r].node() for r in revs]
            common, any, hds = setdiscovery.findcommonheads(
                ui, repo, remote, ancestorsof=nodes
            )
            return common, hds

    remoterevs, _checkout = hg.addbranchrevs(repo, remote, branches, revs=None)
    localrevs = opts[b'rev']
    with util.timedcm('debug-discovery') as t:
        common, hds = doit(localrevs, remoterevs)

    # compute all statistics
    common = set(common)
    rheads = set(hds)
    lheads = set(repo.heads())

    data = {}
    data[b'elapsed'] = t.elapsed
    data[b'nb-common'] = len(common)
    data[b'nb-common-local'] = len(common & lheads)
    data[b'nb-common-remote'] = len(common & rheads)
    data[b'nb-common-both'] = len(common & rheads & lheads)
    data[b'nb-local'] = len(lheads)
    data[b'nb-local-missing'] = data[b'nb-local'] - data[b'nb-common-local']
    data[b'nb-remote'] = len(rheads)
    data[b'nb-remote-unknown'] = data[b'nb-remote'] - data[b'nb-common-remote']
    data[b'nb-revs'] = len(repo.revs(b'all()'))
    data[b'nb-revs-common'] = len(repo.revs(b'::%ln', common))
    data[b'nb-revs-missing'] = data[b'nb-revs'] - data[b'nb-revs-common']

    # display discovery summary
    ui.writenoi18n(b"elapsed time:  %(elapsed)f seconds\n" % data)
    ui.writenoi18n(b"heads summary:\n")
    ui.writenoi18n(b"  total common heads:  %(nb-common)9d\n" % data)
    ui.writenoi18n(b"    also local heads:  %(nb-common-local)9d\n" % data)
    ui.writenoi18n(b"    also remote heads: %(nb-common-remote)9d\n" % data)
    ui.writenoi18n(b"    both:              %(nb-common-both)9d\n" % data)
    ui.writenoi18n(b"  local heads:         %(nb-local)9d\n" % data)
    ui.writenoi18n(b"    common:            %(nb-common-local)9d\n" % data)
    ui.writenoi18n(b"    missing:           %(nb-local-missing)9d\n" % data)
    ui.writenoi18n(b"  remote heads:        %(nb-remote)9d\n" % data)
    ui.writenoi18n(b"    common:            %(nb-common-remote)9d\n" % data)
    ui.writenoi18n(b"    unknown:           %(nb-remote-unknown)9d\n" % data)
    ui.writenoi18n(b"local changesets:      %(nb-revs)9d\n" % data)
    ui.writenoi18n(b"  common:              %(nb-revs-common)9d\n" % data)
    ui.writenoi18n(b"  missing:             %(nb-revs-missing)9d\n" % data)

    if ui.verbose:
        ui.writenoi18n(
            b"common heads: %s\n" % b" ".join(sorted(short(n) for n in common))
        )


_chunksize = 4 << 10


@command(
    b'debugdownload', [(b'o', b'output', b'', _(b'path')),], optionalrepo=True
)
def debugdownload(ui, repo, url, output=None, **opts):
    """download a resource using Mercurial logic and config
    """
    fh = urlmod.open(ui, url, output)

    dest = ui
    if output:
        dest = open(output, b"wb", _chunksize)
    try:
        data = fh.read(_chunksize)
        while data:
            dest.write(data)
            data = fh.read(_chunksize)
    finally:
        if output:
            dest.close()


@command(b'debugextensions', cmdutil.formatteropts, [], optionalrepo=True)
def debugextensions(ui, repo, **opts):
    '''show information about active extensions'''
    opts = pycompat.byteskwargs(opts)
    exts = extensions.extensions(ui)
    hgver = util.version()
    fm = ui.formatter(b'debugextensions', opts)
    for extname, extmod in sorted(exts, key=operator.itemgetter(0)):
        isinternal = extensions.ismoduleinternal(extmod)
        extsource = None

        if util.safehasattr(extmod, '__file__'):
            extsource = pycompat.fsencode(extmod.__file__)
        elif getattr(sys, 'oxidized', False):
            extsource = pycompat.sysexecutable
        if isinternal:
            exttestedwith = []  # never expose magic string to users
        else:
            exttestedwith = getattr(extmod, 'testedwith', b'').split()
        extbuglink = getattr(extmod, 'buglink', None)

        fm.startitem()

        if ui.quiet or ui.verbose:
            fm.write(b'name', b'%s\n', extname)
        else:
            fm.write(b'name', b'%s', extname)
            if isinternal or hgver in exttestedwith:
                fm.plain(b'\n')
            elif not exttestedwith:
                fm.plain(_(b' (untested!)\n'))
            else:
                lasttestedversion = exttestedwith[-1]
                fm.plain(b' (%s!)\n' % lasttestedversion)

        fm.condwrite(
            ui.verbose and extsource,
            b'source',
            _(b'  location: %s\n'),
            extsource or b"",
        )

        if ui.verbose:
            fm.plain(_(b'  bundled: %s\n') % [b'no', b'yes'][isinternal])
        fm.data(bundled=isinternal)

        fm.condwrite(
            ui.verbose and exttestedwith,
            b'testedwith',
            _(b'  tested with: %s\n'),
            fm.formatlist(exttestedwith, name=b'ver'),
        )

        fm.condwrite(
            ui.verbose and extbuglink,
            b'buglink',
            _(b'  bug reporting: %s\n'),
            extbuglink or b"",
        )

    fm.end()


@command(
    b'debugfileset',
    [
        (
            b'r',
            b'rev',
            b'',
            _(b'apply the filespec on this revision'),
            _(b'REV'),
        ),
        (
            b'',
            b'all-files',
            False,
            _(b'test files from all revisions and working directory'),
        ),
        (
            b's',
            b'show-matcher',
            None,
            _(b'print internal representation of matcher'),
        ),
        (
            b'p',
            b'show-stage',
            [],
            _(b'print parsed tree at the given stage'),
            _(b'NAME'),
        ),
    ],
    _(b'[-r REV] [--all-files] [OPTION]... FILESPEC'),
)
def debugfileset(ui, repo, expr, **opts):
    '''parse and apply a fileset specification'''
    from . import fileset

    fileset.symbols  # force import of fileset so we have predicates to optimize
    opts = pycompat.byteskwargs(opts)
    ctx = scmutil.revsingle(repo, opts.get(b'rev'), None)

    stages = [
        (b'parsed', pycompat.identity),
        (b'analyzed', filesetlang.analyze),
        (b'optimized', filesetlang.optimize),
    ]
    stagenames = {n for n, f in stages}

    showalways = set()
    if ui.verbose and not opts[b'show_stage']:
        # show parsed tree by --verbose (deprecated)
        showalways.add(b'parsed')
    if opts[b'show_stage'] == [b'all']:
        showalways.update(stagenames)
    else:
        for n in opts[b'show_stage']:
            if n not in stagenames:
                raise error.Abort(_(b'invalid stage name: %s') % n)
        showalways.update(opts[b'show_stage'])

    tree = filesetlang.parse(expr)
    for n, f in stages:
        tree = f(tree)
        if n in showalways:
            if opts[b'show_stage'] or n != b'parsed':
                ui.write(b"* %s:\n" % n)
            ui.write(filesetlang.prettyformat(tree), b"\n")

    files = set()
    if opts[b'all_files']:
        for r in repo:
            c = repo[r]
            files.update(c.files())
            files.update(c.substate)
    if opts[b'all_files'] or ctx.rev() is None:
        wctx = repo[None]
        files.update(
            repo.dirstate.walk(
                scmutil.matchall(repo),
                subrepos=list(wctx.substate),
                unknown=True,
                ignored=True,
            )
        )
        files.update(wctx.substate)
    else:
        files.update(ctx.files())
        files.update(ctx.substate)

    m = ctx.matchfileset(repo.getcwd(), expr)
    if opts[b'show_matcher'] or (opts[b'show_matcher'] is None and ui.verbose):
        ui.writenoi18n(b'* matcher:\n', stringutil.prettyrepr(m), b'\n')
    for f in sorted(files):
        if not m(f):
            continue
        ui.write(b"%s\n" % f)


@command(b'debugformat', [] + cmdutil.formatteropts)
def debugformat(ui, repo, **opts):
    """display format information about the current repository

    Use --verbose to get extra information about current config value and
    Mercurial default."""
    opts = pycompat.byteskwargs(opts)
    maxvariantlength = max(len(fv.name) for fv in upgrade.allformatvariant)
    maxvariantlength = max(len(b'format-variant'), maxvariantlength)

    def makeformatname(name):
        return b'%s:' + (b' ' * (maxvariantlength - len(name)))

    fm = ui.formatter(b'debugformat', opts)
    if fm.isplain():

        def formatvalue(value):
            if util.safehasattr(value, b'startswith'):
                return value
            if value:
                return b'yes'
            else:
                return b'no'

    else:
        formatvalue = pycompat.identity

    fm.plain(b'format-variant')
    fm.plain(b' ' * (maxvariantlength - len(b'format-variant')))
    fm.plain(b' repo')
    if ui.verbose:
        fm.plain(b' config default')
    fm.plain(b'\n')
    for fv in upgrade.allformatvariant:
        fm.startitem()
        repovalue = fv.fromrepo(repo)
        configvalue = fv.fromconfig(repo)

        if repovalue != configvalue:
            namelabel = b'formatvariant.name.mismatchconfig'
            repolabel = b'formatvariant.repo.mismatchconfig'
        elif repovalue != fv.default:
            namelabel = b'formatvariant.name.mismatchdefault'
            repolabel = b'formatvariant.repo.mismatchdefault'
        else:
            namelabel = b'formatvariant.name.uptodate'
            repolabel = b'formatvariant.repo.uptodate'

        fm.write(b'name', makeformatname(fv.name), fv.name, label=namelabel)
        fm.write(b'repo', b' %3s', formatvalue(repovalue), label=repolabel)
        if fv.default != configvalue:
            configlabel = b'formatvariant.config.special'
        else:
            configlabel = b'formatvariant.config.default'
        fm.condwrite(
            ui.verbose,
            b'config',
            b' %6s',
            formatvalue(configvalue),
            label=configlabel,
        )
        fm.condwrite(
            ui.verbose,
            b'default',
            b' %7s',
            formatvalue(fv.default),
            label=b'formatvariant.default',
        )
        fm.plain(b'\n')
    fm.end()


@command(b'debugfsinfo', [], _(b'[PATH]'), norepo=True)
def debugfsinfo(ui, path=b"."):
    """show information detected about current filesystem"""
    ui.writenoi18n(b'path: %s\n' % path)
    ui.writenoi18n(
        b'mounted on: %s\n' % (util.getfsmountpoint(path) or b'(unknown)')
    )
    ui.writenoi18n(b'exec: %s\n' % (util.checkexec(path) and b'yes' or b'no'))
    ui.writenoi18n(b'fstype: %s\n' % (util.getfstype(path) or b'(unknown)'))
    ui.writenoi18n(
        b'symlink: %s\n' % (util.checklink(path) and b'yes' or b'no')
    )
    ui.writenoi18n(
        b'hardlink: %s\n' % (util.checknlink(path) and b'yes' or b'no')
    )
    casesensitive = b'(unknown)'
    try:
        with pycompat.namedtempfile(prefix=b'.debugfsinfo', dir=path) as f:
            casesensitive = util.fscasesensitive(f.name) and b'yes' or b'no'
    except OSError:
        pass
    ui.writenoi18n(b'case-sensitive: %s\n' % casesensitive)


@command(
    b'debuggetbundle',
    [
        (b'H', b'head', [], _(b'id of head node'), _(b'ID')),
        (b'C', b'common', [], _(b'id of common node'), _(b'ID')),
        (
            b't',
            b'type',
            b'bzip2',
            _(b'bundle compression type to use'),
            _(b'TYPE'),
        ),
    ],
    _(b'REPO FILE [-H|-C ID]...'),
    norepo=True,
)
def debuggetbundle(ui, repopath, bundlepath, head=None, common=None, **opts):
    """retrieves a bundle from a repo

    Every ID must be a full-length hex node id string. Saves the bundle to the
    given file.
    """
    opts = pycompat.byteskwargs(opts)
    repo = hg.peer(ui, opts, repopath)
    if not repo.capable(b'getbundle'):
        raise error.Abort(b"getbundle() not supported by target repository")
    args = {}
    if common:
        args['common'] = [bin(s) for s in common]
    if head:
        args['heads'] = [bin(s) for s in head]
    # TODO: get desired bundlecaps from command line.
    args['bundlecaps'] = None
    bundle = repo.getbundle(b'debug', **args)

    bundletype = opts.get(b'type', b'bzip2').lower()
    btypes = {
        b'none': b'HG10UN',
        b'bzip2': b'HG10BZ',
        b'gzip': b'HG10GZ',
        b'bundle2': b'HG20',
    }
    bundletype = btypes.get(bundletype)
    if bundletype not in bundle2.bundletypes:
        raise error.Abort(_(b'unknown bundle type specified with --type'))
    bundle2.writebundle(ui, bundle, bundlepath, bundletype)


@command(b'debugignore', [], b'[FILE]')
def debugignore(ui, repo, *files, **opts):
    """display the combined ignore pattern and information about ignored files

    With no argument display the combined ignore pattern.

    Given space separated file names, shows if the given file is ignored and
    if so, show the ignore rule (file and line number) that matched it.
    """
    ignore = repo.dirstate._ignore
    if not files:
        # Show all the patterns
        ui.write(b"%s\n" % pycompat.byterepr(ignore))
    else:
        m = scmutil.match(repo[None], pats=files)
        uipathfn = scmutil.getuipathfn(repo, legacyrelativevalue=True)
        for f in m.files():
            nf = util.normpath(f)
            ignored = None
            ignoredata = None
            if nf != b'.':
                if ignore(nf):
                    ignored = nf
                    ignoredata = repo.dirstate._ignorefileandline(nf)
                else:
                    for p in pathutil.finddirs(nf):
                        if ignore(p):
                            ignored = p
                            ignoredata = repo.dirstate._ignorefileandline(p)
                            break
            if ignored:
                if ignored == nf:
                    ui.write(_(b"%s is ignored\n") % uipathfn(f))
                else:
                    ui.write(
                        _(
                            b"%s is ignored because of "
                            b"containing directory %s\n"
                        )
                        % (uipathfn(f), ignored)
                    )
                ignorefile, lineno, line = ignoredata
                ui.write(
                    _(b"(ignore rule in %s, line %d: '%s')\n")
                    % (ignorefile, lineno, line)
                )
            else:
                ui.write(_(b"%s is not ignored\n") % uipathfn(f))


@command(
    b'debugindex',
    cmdutil.debugrevlogopts + cmdutil.formatteropts,
    _(b'-c|-m|FILE'),
)
def debugindex(ui, repo, file_=None, **opts):
    """dump index data for a storage primitive"""
    opts = pycompat.byteskwargs(opts)
    store = cmdutil.openstorage(repo, b'debugindex', file_, opts)

    if ui.debugflag:
        shortfn = hex
    else:
        shortfn = short

    idlen = 12
    for i in store:
        idlen = len(shortfn(store.node(i)))
        break

    fm = ui.formatter(b'debugindex', opts)
    fm.plain(
        b'   rev linkrev %s %s p2\n'
        % (b'nodeid'.ljust(idlen), b'p1'.ljust(idlen))
    )

    for rev in store:
        node = store.node(rev)
        parents = store.parents(node)

        fm.startitem()
        fm.write(b'rev', b'%6d ', rev)
        fm.write(b'linkrev', b'%7d ', store.linkrev(rev))
        fm.write(b'node', b'%s ', shortfn(node))
        fm.write(b'p1', b'%s ', shortfn(parents[0]))
        fm.write(b'p2', b'%s', shortfn(parents[1]))
        fm.plain(b'\n')

    fm.end()


@command(
    b'debugindexdot',
    cmdutil.debugrevlogopts,
    _(b'-c|-m|FILE'),
    optionalrepo=True,
)
def debugindexdot(ui, repo, file_=None, **opts):
    """dump an index DAG as a graphviz dot file"""
    opts = pycompat.byteskwargs(opts)
    r = cmdutil.openstorage(repo, b'debugindexdot', file_, opts)
    ui.writenoi18n(b"digraph G {\n")
    for i in r:
        node = r.node(i)
        pp = r.parents(node)
        ui.write(b"\t%d -> %d\n" % (r.rev(pp[0]), i))
        if pp[1] != nullid:
            ui.write(b"\t%d -> %d\n" % (r.rev(pp[1]), i))
    ui.write(b"}\n")


@command(b'debugindexstats', [])
def debugindexstats(ui, repo):
    """show stats related to the changelog index"""
    repo.changelog.shortest(nullid, 1)
    index = repo.changelog.index
    if not util.safehasattr(index, b'stats'):
        raise error.Abort(_(b'debugindexstats only works with native code'))
    for k, v in sorted(index.stats().items()):
        ui.write(b'%s: %d\n' % (k, v))


@command(b'debuginstall', [] + cmdutil.formatteropts, b'', norepo=True)
def debuginstall(ui, **opts):
    '''test Mercurial installation

    Returns 0 on success.
    '''
    opts = pycompat.byteskwargs(opts)

    problems = 0

    fm = ui.formatter(b'debuginstall', opts)
    fm.startitem()

    # encoding might be unknown or wrong. don't translate these messages.
    fm.write(b'encoding', b"checking encoding (%s)...\n", encoding.encoding)
    err = None
    try:
        codecs.lookup(pycompat.sysstr(encoding.encoding))
    except LookupError as inst:
        err = stringutil.forcebytestr(inst)
        problems += 1
    fm.condwrite(
        err,
        b'encodingerror',
        b" %s\n (check that your locale is properly set)\n",
        err,
    )

    # Python
    pythonlib = None
    if util.safehasattr(os, '__file__'):
        pythonlib = os.path.dirname(pycompat.fsencode(os.__file__))
    elif getattr(sys, 'oxidized', False):
        pythonlib = pycompat.sysexecutable

    fm.write(
        b'pythonexe',
        _(b"checking Python executable (%s)\n"),
        pycompat.sysexecutable or _(b"unknown"),
    )
    fm.write(
        b'pythonimplementation',
        _(b"checking Python implementation (%s)\n"),
        pycompat.sysbytes(platform.python_implementation()),
    )
    fm.write(
        b'pythonver',
        _(b"checking Python version (%s)\n"),
        (b"%d.%d.%d" % sys.version_info[:3]),
    )
    fm.write(
        b'pythonlib',
        _(b"checking Python lib (%s)...\n"),
        pythonlib or _(b"unknown"),
    )

    try:
        from . import rustext

        rustext.__doc__  # trigger lazy import
    except ImportError:
        rustext = None

    security = set(sslutil.supportedprotocols)
    if sslutil.hassni:
        security.add(b'sni')

    fm.write(
        b'pythonsecurity',
        _(b"checking Python security support (%s)\n"),
        fm.formatlist(sorted(security), name=b'protocol', fmt=b'%s', sep=b','),
    )

    # These are warnings, not errors. So don't increment problem count. This
    # may change in the future.
    if b'tls1.2' not in security:
        fm.plain(
            _(
                b'  TLS 1.2 not supported by Python install; '
                b'network connections lack modern security\n'
            )
        )
    if b'sni' not in security:
        fm.plain(
            _(
                b'  SNI not supported by Python install; may have '
                b'connectivity issues with some servers\n'
            )
        )

    fm.plain(
        _(
            b"checking Rust extensions (%s)\n"
            % (b'missing' if rustext is None else b'installed')
        ),
    )

    # TODO print CA cert info

    # hg version
    hgver = util.version()
    fm.write(
        b'hgver', _(b"checking Mercurial version (%s)\n"), hgver.split(b'+')[0]
    )
    fm.write(
        b'hgverextra',
        _(b"checking Mercurial custom build (%s)\n"),
        b'+'.join(hgver.split(b'+')[1:]),
    )

    # compiled modules
    hgmodules = None
    if util.safehasattr(sys.modules[__name__], '__file__'):
        hgmodules = os.path.dirname(pycompat.fsencode(__file__))
    elif getattr(sys, 'oxidized', False):
        hgmodules = pycompat.sysexecutable

    fm.write(
        b'hgmodulepolicy', _(b"checking module policy (%s)\n"), policy.policy
    )
    fm.write(
        b'hgmodules',
        _(b"checking installed modules (%s)...\n"),
        hgmodules or _(b"unknown"),
    )

    rustandc = policy.policy in (b'rust+c', b'rust+c-allow')
    rustext = rustandc  # for now, that's the only case
    cext = policy.policy in (b'c', b'allow') or rustandc
    nopure = cext or rustext
    if nopure:
        err = None
        try:
            if cext:
                from .cext import (  # pytype: disable=import-error
                    base85,
                    bdiff,
                    mpatch,
                    osutil,
                )

                # quiet pyflakes
                dir(bdiff), dir(mpatch), dir(base85), dir(osutil)
            if rustext:
                from .rustext import (  # pytype: disable=import-error
                    ancestor,
                    dirstate,
                )

                dir(ancestor), dir(dirstate)  # quiet pyflakes
        except Exception as inst:
            err = stringutil.forcebytestr(inst)
            problems += 1
        fm.condwrite(err, b'extensionserror', b" %s\n", err)

    compengines = util.compengines._engines.values()
    fm.write(
        b'compengines',
        _(b'checking registered compression engines (%s)\n'),
        fm.formatlist(
            sorted(e.name() for e in compengines),
            name=b'compengine',
            fmt=b'%s',
            sep=b', ',
        ),
    )
    fm.write(
        b'compenginesavail',
        _(b'checking available compression engines (%s)\n'),
        fm.formatlist(
            sorted(e.name() for e in compengines if e.available()),
            name=b'compengine',
            fmt=b'%s',
            sep=b', ',
        ),
    )
    wirecompengines = compression.compengines.supportedwireengines(
        compression.SERVERROLE
    )
    fm.write(
        b'compenginesserver',
        _(
            b'checking available compression engines '
            b'for wire protocol (%s)\n'
        ),
        fm.formatlist(
            [e.name() for e in wirecompengines if e.wireprotosupport()],
            name=b'compengine',
            fmt=b'%s',
            sep=b', ',
        ),
    )
    re2 = b'missing'
    if util._re2:
        re2 = b'available'
    fm.plain(_(b'checking "re2" regexp engine (%s)\n') % re2)
    fm.data(re2=bool(util._re2))

    # templates
    p = templater.templatedir()
    fm.write(b'templatedirs', b'checking templates (%s)...\n', p or b'')
    fm.condwrite(not p, b'', _(b" no template directories found\n"))
    if p:
        (m, fp) = templater.try_open_template(b"map-cmdline.default")
        if m:
            # template found, check if it is working
            err = None
            try:
                templater.templater.frommapfile(m)
            except Exception as inst:
                err = stringutil.forcebytestr(inst)
                p = None
            fm.condwrite(err, b'defaulttemplateerror', b" %s\n", err)
        else:
            p = None
        fm.condwrite(
            p, b'defaulttemplate', _(b"checking default template (%s)\n"), m
        )
        fm.condwrite(
            not m,
            b'defaulttemplatenotfound',
            _(b" template '%s' not found\n"),
            b"default",
        )
    if not p:
        problems += 1
    fm.condwrite(
        not p, b'', _(b" (templates seem to have been installed incorrectly)\n")
    )

    # editor
    editor = ui.geteditor()
    editor = util.expandpath(editor)
    editorbin = procutil.shellsplit(editor)[0]
    fm.write(b'editor', _(b"checking commit editor... (%s)\n"), editorbin)
    cmdpath = procutil.findexe(editorbin)
    fm.condwrite(
        not cmdpath and editor == b'vi',
        b'vinotfound',
        _(
            b" No commit editor set and can't find %s in PATH\n"
            b" (specify a commit editor in your configuration"
            b" file)\n"
        ),
        not cmdpath and editor == b'vi' and editorbin,
    )
    fm.condwrite(
        not cmdpath and editor != b'vi',
        b'editornotfound',
        _(
            b" Can't find editor '%s' in PATH\n"
            b" (specify a commit editor in your configuration"
            b" file)\n"
        ),
        not cmdpath and editorbin,
    )
    if not cmdpath and editor != b'vi':
        problems += 1

    # check username
    username = None
    err = None
    try:
        username = ui.username()
    except error.Abort as e:
        err = e.message
        problems += 1

    fm.condwrite(
        username, b'username', _(b"checking username (%s)\n"), username
    )
    fm.condwrite(
        err,
        b'usernameerror',
        _(
            b"checking username...\n %s\n"
            b" (specify a username in your configuration file)\n"
        ),
        err,
    )

    for name, mod in extensions.extensions():
        handler = getattr(mod, 'debuginstall', None)
        if handler is not None:
            problems += handler(ui, fm)

    fm.condwrite(not problems, b'', _(b"no problems detected\n"))
    if not problems:
        fm.data(problems=problems)
    fm.condwrite(
        problems,
        b'problems',
        _(b"%d problems detected, please check your install!\n"),
        problems,
    )
    fm.end()

    return problems


@command(b'debugknown', [], _(b'REPO ID...'), norepo=True)
def debugknown(ui, repopath, *ids, **opts):
    """test whether node ids are known to a repo

    Every ID must be a full-length hex node id string. Returns a list of 0s
    and 1s indicating unknown/known.
    """
    opts = pycompat.byteskwargs(opts)
    repo = hg.peer(ui, opts, repopath)
    if not repo.capable(b'known'):
        raise error.Abort(b"known() not supported by target repository")
    flags = repo.known([bin(s) for s in ids])
    ui.write(b"%s\n" % (b"".join([f and b"1" or b"0" for f in flags])))


@command(b'debuglabelcomplete', [], _(b'LABEL...'))
def debuglabelcomplete(ui, repo, *args):
    '''backwards compatibility with old bash completion scripts (DEPRECATED)'''
    debugnamecomplete(ui, repo, *args)


@command(
    b'debuglocks',
    [
        (b'L', b'force-lock', None, _(b'free the store lock (DANGEROUS)')),
        (
            b'W',
            b'force-wlock',
            None,
            _(b'free the working state lock (DANGEROUS)'),
        ),
        (b's', b'set-lock', None, _(b'set the store lock until stopped')),
        (
            b'S',
            b'set-wlock',
            None,
            _(b'set the working state lock until stopped'),
        ),
    ],
    _(b'[OPTION]...'),
)
def debuglocks(ui, repo, **opts):
    """show or modify state of locks

    By default, this command will show which locks are held. This
    includes the user and process holding the lock, the amount of time
    the lock has been held, and the machine name where the process is
    running if it's not local.

    Locks protect the integrity of Mercurial's data, so should be
    treated with care. System crashes or other interruptions may cause
    locks to not be properly released, though Mercurial will usually
    detect and remove such stale locks automatically.

    However, detecting stale locks may not always be possible (for
    instance, on a shared filesystem). Removing locks may also be
    blocked by filesystem permissions.

    Setting a lock will prevent other commands from changing the data.
    The command will wait until an interruption (SIGINT, SIGTERM, ...) occurs.
    The set locks are removed when the command exits.

    Returns 0 if no locks are held.

    """

    if opts.get('force_lock'):
        repo.svfs.unlink(b'lock')
    if opts.get('force_wlock'):
        repo.vfs.unlink(b'wlock')
    if opts.get('force_lock') or opts.get('force_wlock'):
        return 0

    locks = []
    try:
        if opts.get('set_wlock'):
            try:
                locks.append(repo.wlock(False))
            except error.LockHeld:
                raise error.Abort(_(b'wlock is already held'))
        if opts.get('set_lock'):
            try:
                locks.append(repo.lock(False))
            except error.LockHeld:
                raise error.Abort(_(b'lock is already held'))
        if len(locks):
            ui.promptchoice(_(b"ready to release the lock (y)? $$ &Yes"))
            return 0
    finally:
        release(*locks)

    now = time.time()
    held = 0

    def report(vfs, name, method):
        # this causes stale locks to get reaped for more accurate reporting
        try:
            l = method(False)
        except error.LockHeld:
            l = None

        if l:
            l.release()
        else:
            try:
                st = vfs.lstat(name)
                age = now - st[stat.ST_MTIME]
                user = util.username(st.st_uid)
                locker = vfs.readlock(name)
                if b":" in locker:
                    host, pid = locker.split(b':')
                    if host == socket.gethostname():
                        locker = b'user %s, process %s' % (user or b'None', pid)
                    else:
                        locker = b'user %s, process %s, host %s' % (
                            user or b'None',
                            pid,
                            host,
                        )
                ui.writenoi18n(b"%-6s %s (%ds)\n" % (name + b":", locker, age))
                return 1
            except OSError as e:
                if e.errno != errno.ENOENT:
                    raise

        ui.writenoi18n(b"%-6s free\n" % (name + b":"))
        return 0

    held += report(repo.svfs, b"lock", repo.lock)
    held += report(repo.vfs, b"wlock", repo.wlock)

    return held


@command(
    b'debugmanifestfulltextcache',
    [
        (b'', b'clear', False, _(b'clear the cache')),
        (
            b'a',
            b'add',
            [],
            _(b'add the given manifest nodes to the cache'),
            _(b'NODE'),
        ),
    ],
    b'',
)
def debugmanifestfulltextcache(ui, repo, add=(), **opts):
    """show, clear or amend the contents of the manifest fulltext cache"""

    def getcache():
        r = repo.manifestlog.getstorage(b'')
        try:
            return r._fulltextcache
        except AttributeError:
            msg = _(
                b"Current revlog implementation doesn't appear to have a "
                b"manifest fulltext cache\n"
            )
            raise error.Abort(msg)

    if opts.get('clear'):
        with repo.wlock():
            cache = getcache()
            cache.clear(clear_persisted_data=True)
            return

    if add:
        with repo.wlock():
            m = repo.manifestlog
            store = m.getstorage(b'')
            for n in add:
                try:
                    manifest = m[store.lookup(n)]
                except error.LookupError as e:
                    raise error.Abort(e, hint=b"Check your manifest node id")
                manifest.read()  # stores revisision in cache too
            return

    cache = getcache()
    if not len(cache):
        ui.write(_(b'cache empty\n'))
    else:
        ui.write(
            _(
                b'cache contains %d manifest entries, in order of most to '
                b'least recent:\n'
            )
            % (len(cache),)
        )
        totalsize = 0
        for nodeid in cache:
            # Use cache.get to not update the LRU order
            data = cache.peek(nodeid)
            size = len(data)
            totalsize += size + 24  # 20 bytes nodeid, 4 bytes size
            ui.write(
                _(b'id: %s, size %s\n') % (hex(nodeid), util.bytecount(size))
            )
        ondisk = cache._opener.stat(b'manifestfulltextcache').st_size
        ui.write(
            _(b'total cache data size %s, on-disk %s\n')
            % (util.bytecount(totalsize), util.bytecount(ondisk))
        )


@command(b'debugmergestate', [] + cmdutil.templateopts, b'')
def debugmergestate(ui, repo, *args, **opts):
    """print merge state

    Use --verbose to print out information about whether v1 or v2 merge state
    was chosen."""

    if ui.verbose:
        ms = mergestatemod.mergestate(repo)

        # sort so that reasonable information is on top
        v1records = ms._readrecordsv1()
        v2records = ms._readrecordsv2()

        if not v1records and not v2records:
            pass
        elif not v2records:
            ui.writenoi18n(b'no version 2 merge state\n')
        elif ms._v1v2match(v1records, v2records):
            ui.writenoi18n(b'v1 and v2 states match: using v2\n')
        else:
            ui.writenoi18n(b'v1 and v2 states mismatch: using v1\n')

    opts = pycompat.byteskwargs(opts)
    if not opts[b'template']:
        opts[b'template'] = (
            b'{if(commits, "", "no merge state found\n")}'
            b'{commits % "{name}{if(label, " ({label})")}: {node}\n"}'
            b'{files % "file: {path} (state \\"{state}\\")\n'
            b'{if(local_path, "'
            b'  local path: {local_path} (hash {local_key}, flags \\"{local_flags}\\")\n'
            b'  ancestor path: {ancestor_path} (node {ancestor_node})\n'
            b'  other path: {other_path} (node {other_node})\n'
            b'")}'
            b'{if(rename_side, "'
            b'  rename side: {rename_side}\n'
            b'  renamed path: {renamed_path}\n'
            b'")}'
            b'{extras % "  extra: {key} = {value}\n"}'
            b'"}'
            b'{extras % "extra: {file} ({key} = {value})\n"}'
        )

    ms = mergestatemod.mergestate.read(repo)

    fm = ui.formatter(b'debugmergestate', opts)
    fm.startitem()

    fm_commits = fm.nested(b'commits')
    if ms.active():
        for name, node, label_index in (
            (b'local', ms.local, 0),
            (b'other', ms.other, 1),
        ):
            fm_commits.startitem()
            fm_commits.data(name=name)
            fm_commits.data(node=hex(node))
            if ms._labels and len(ms._labels) > label_index:
                fm_commits.data(label=ms._labels[label_index])
    fm_commits.end()

    fm_files = fm.nested(b'files')
    if ms.active():
        for f in ms:
            fm_files.startitem()
            fm_files.data(path=f)
            state = ms._state[f]
            fm_files.data(state=state[0])
            if state[0] in (
                mergestatemod.MERGE_RECORD_UNRESOLVED,
                mergestatemod.MERGE_RECORD_RESOLVED,
            ):
                fm_files.data(local_key=state[1])
                fm_files.data(local_path=state[2])
                fm_files.data(ancestor_path=state[3])
                fm_files.data(ancestor_node=state[4])
                fm_files.data(other_path=state[5])
                fm_files.data(other_node=state[6])
                fm_files.data(local_flags=state[7])
            elif state[0] in (
                mergestatemod.MERGE_RECORD_UNRESOLVED_PATH,
                mergestatemod.MERGE_RECORD_RESOLVED_PATH,
            ):
                fm_files.data(renamed_path=state[1])
                fm_files.data(rename_side=state[2])
            fm_extras = fm_files.nested(b'extras')
            for k, v in sorted(ms.extras(f).items()):
                fm_extras.startitem()
                fm_extras.data(key=k)
                fm_extras.data(value=v)
            fm_extras.end()

    fm_files.end()

    fm_extras = fm.nested(b'extras')
    for f, d in sorted(pycompat.iteritems(ms.allextras())):
        if f in ms:
            # If file is in mergestate, we have already processed it's extras
            continue
        for k, v in pycompat.iteritems(d):
            fm_extras.startitem()
            fm_extras.data(file=f)
            fm_extras.data(key=k)
            fm_extras.data(value=v)
    fm_extras.end()

    fm.end()


@command(b'debugnamecomplete', [], _(b'NAME...'))
def debugnamecomplete(ui, repo, *args):
    '''complete "names" - tags, open branch names, bookmark names'''

    names = set()
    # since we previously only listed open branches, we will handle that
    # specially (after this for loop)
    for name, ns in pycompat.iteritems(repo.names):
        if name != b'branches':
            names.update(ns.listnames(repo))
    names.update(
        tag
        for (tag, heads, tip, closed) in repo.branchmap().iterbranches()
        if not closed
    )
    completions = set()
    if not args:
        args = [b'']
    for a in args:
        completions.update(n for n in names if n.startswith(a))
    ui.write(b'\n'.join(sorted(completions)))
    ui.write(b'\n')


@command(
    b'debugnodemap',
    [
        (
            b'',
            b'dump-new',
            False,
            _(b'write a (new) persistent binary nodemap on stdin'),
        ),
        (b'', b'dump-disk', False, _(b'dump on-disk data on stdin')),
        (
            b'',
            b'check',
            False,
            _(b'check that the data on disk data are correct.'),
        ),
        (
            b'',
            b'metadata',
            False,
            _(b'display the on disk meta data for the nodemap'),
        ),
    ],
)
def debugnodemap(ui, repo, **opts):
    """write and inspect on disk nodemap
    """
    if opts['dump_new']:
        unfi = repo.unfiltered()
        cl = unfi.changelog
        if util.safehasattr(cl.index, "nodemap_data_all"):
            data = cl.index.nodemap_data_all()
        else:
            data = nodemap.persistent_data(cl.index)
        ui.write(data)
    elif opts['dump_disk']:
        unfi = repo.unfiltered()
        cl = unfi.changelog
        nm_data = nodemap.persisted_data(cl)
        if nm_data is not None:
            docket, data = nm_data
            ui.write(data[:])
    elif opts['check']:
        unfi = repo.unfiltered()
        cl = unfi.changelog
        nm_data = nodemap.persisted_data(cl)
        if nm_data is not None:
            docket, data = nm_data
            return nodemap.check_data(ui, cl.index, data)
    elif opts['metadata']:
        unfi = repo.unfiltered()
        cl = unfi.changelog
        nm_data = nodemap.persisted_data(cl)
        if nm_data is not None:
            docket, data = nm_data
            ui.write((b"uid: %s\n") % docket.uid)
            ui.write((b"tip-rev: %d\n") % docket.tip_rev)
            ui.write((b"tip-node: %s\n") % hex(docket.tip_node))
            ui.write((b"data-length: %d\n") % docket.data_length)
            ui.write((b"data-unused: %d\n") % docket.data_unused)
            unused_perc = docket.data_unused * 100.0 / docket.data_length
            ui.write((b"data-unused: %2.3f%%\n") % unused_perc)


@command(
    b'debugobsolete',
    [
        (b'', b'flags', 0, _(b'markers flag')),
        (
            b'',
            b'record-parents',
            False,
            _(b'record parent information for the precursor'),
        ),
        (b'r', b'rev', [], _(b'display markers relevant to REV')),
        (
            b'',
            b'exclusive',
            False,
            _(b'restrict display to markers only relevant to REV'),
        ),
        (b'', b'index', False, _(b'display index of the marker')),
        (b'', b'delete', [], _(b'delete markers specified by indices')),
    ]
    + cmdutil.commitopts2
    + cmdutil.formatteropts,
    _(b'[OBSOLETED [REPLACEMENT ...]]'),
)
def debugobsolete(ui, repo, precursor=None, *successors, **opts):
    """create arbitrary obsolete marker

    With no arguments, displays the list of obsolescence markers."""

    opts = pycompat.byteskwargs(opts)

    def parsenodeid(s):
        try:
            # We do not use revsingle/revrange functions here to accept
            # arbitrary node identifiers, possibly not present in the
            # local repository.
            n = bin(s)
            if len(n) != len(nullid):
                raise TypeError()
            return n
        except TypeError:
            raise error.InputError(
                b'changeset references must be full hexadecimal '
                b'node identifiers'
            )

    if opts.get(b'delete'):
        indices = []
        for v in opts.get(b'delete'):
            try:
                indices.append(int(v))
            except ValueError:
                raise error.InputError(
                    _(b'invalid index value: %r') % v,
                    hint=_(b'use integers for indices'),
                )

        if repo.currenttransaction():
            raise error.Abort(
                _(b'cannot delete obsmarkers in the middle of transaction.')
            )

        with repo.lock():
            n = repair.deleteobsmarkers(repo.obsstore, indices)
            ui.write(_(b'deleted %i obsolescence markers\n') % n)

        return

    if precursor is not None:
        if opts[b'rev']:
            raise error.InputError(
                b'cannot select revision when creating marker'
            )
        metadata = {}
        metadata[b'user'] = encoding.fromlocal(opts[b'user'] or ui.username())
        succs = tuple(parsenodeid(succ) for succ in successors)
        l = repo.lock()
        try:
            tr = repo.transaction(b'debugobsolete')
            try:
                date = opts.get(b'date')
                if date:
                    date = dateutil.parsedate(date)
                else:
                    date = None
                prec = parsenodeid(precursor)
                parents = None
                if opts[b'record_parents']:
                    if prec not in repo.unfiltered():
                        raise error.Abort(
                            b'cannot used --record-parents on '
                            b'unknown changesets'
                        )
                    parents = repo.unfiltered()[prec].parents()
                    parents = tuple(p.node() for p in parents)
                repo.obsstore.create(
                    tr,
                    prec,
                    succs,
                    opts[b'flags'],
                    parents=parents,
                    date=date,
                    metadata=metadata,
                    ui=ui,
                )
                tr.close()
            except ValueError as exc:
                raise error.Abort(
                    _(b'bad obsmarker input: %s') % pycompat.bytestr(exc)
                )
            finally:
                tr.release()
        finally:
            l.release()
    else:
        if opts[b'rev']:
            revs = scmutil.revrange(repo, opts[b'rev'])
            nodes = [repo[r].node() for r in revs]
            markers = list(
                obsutil.getmarkers(
                    repo, nodes=nodes, exclusive=opts[b'exclusive']
                )
            )
            markers.sort(key=lambda x: x._data)
        else:
            markers = obsutil.getmarkers(repo)

        markerstoiter = markers
        isrelevant = lambda m: True
        if opts.get(b'rev') and opts.get(b'index'):
            markerstoiter = obsutil.getmarkers(repo)
            markerset = set(markers)
            isrelevant = lambda m: m in markerset

        fm = ui.formatter(b'debugobsolete', opts)
        for i, m in enumerate(markerstoiter):
            if not isrelevant(m):
                # marker can be irrelevant when we're iterating over a set
                # of markers (markerstoiter) which is bigger than the set
                # of markers we want to display (markers)
                # this can happen if both --index and --rev options are
                # provided and thus we need to iterate over all of the markers
                # to get the correct indices, but only display the ones that
                # are relevant to --rev value
                continue
            fm.startitem()
            ind = i if opts.get(b'index') else None
            cmdutil.showmarker(fm, m, index=ind)
        fm.end()


@command(
    b'debugp1copies',
    [(b'r', b'rev', b'', _(b'revision to debug'), _(b'REV'))],
    _(b'[-r REV]'),
)
def debugp1copies(ui, repo, **opts):
    """dump copy information compared to p1"""

    opts = pycompat.byteskwargs(opts)
    ctx = scmutil.revsingle(repo, opts.get(b'rev'), default=None)
    for dst, src in ctx.p1copies().items():
        ui.write(b'%s -> %s\n' % (src, dst))


@command(
    b'debugp2copies',
    [(b'r', b'rev', b'', _(b'revision to debug'), _(b'REV'))],
    _(b'[-r REV]'),
)
def debugp1copies(ui, repo, **opts):
    """dump copy information compared to p2"""

    opts = pycompat.byteskwargs(opts)
    ctx = scmutil.revsingle(repo, opts.get(b'rev'), default=None)
    for dst, src in ctx.p2copies().items():
        ui.write(b'%s -> %s\n' % (src, dst))


@command(
    b'debugpathcomplete',
    [
        (b'f', b'full', None, _(b'complete an entire path')),
        (b'n', b'normal', None, _(b'show only normal files')),
        (b'a', b'added', None, _(b'show only added files')),
        (b'r', b'removed', None, _(b'show only removed files')),
    ],
    _(b'FILESPEC...'),
)
def debugpathcomplete(ui, repo, *specs, **opts):
    '''complete part or all of a tracked path

    This command supports shells that offer path name completion. It
    currently completes only files already known to the dirstate.

    Completion extends only to the next path segment unless
    --full is specified, in which case entire paths are used.'''

    def complete(path, acceptable):
        dirstate = repo.dirstate
        spec = os.path.normpath(os.path.join(encoding.getcwd(), path))
        rootdir = repo.root + pycompat.ossep
        if spec != repo.root and not spec.startswith(rootdir):
            return [], []
        if os.path.isdir(spec):
            spec += b'/'
        spec = spec[len(rootdir) :]
        fixpaths = pycompat.ossep != b'/'
        if fixpaths:
            spec = spec.replace(pycompat.ossep, b'/')
        speclen = len(spec)
        fullpaths = opts['full']
        files, dirs = set(), set()
        adddir, addfile = dirs.add, files.add
        for f, st in pycompat.iteritems(dirstate):
            if f.startswith(spec) and st[0] in acceptable:
                if fixpaths:
                    f = f.replace(b'/', pycompat.ossep)
                if fullpaths:
                    addfile(f)
                    continue
                s = f.find(pycompat.ossep, speclen)
                if s >= 0:
                    adddir(f[:s])
                else:
                    addfile(f)
        return files, dirs

    acceptable = b''
    if opts['normal']:
        acceptable += b'nm'
    if opts['added']:
        acceptable += b'a'
    if opts['removed']:
        acceptable += b'r'
    cwd = repo.getcwd()
    if not specs:
        specs = [b'.']

    files, dirs = set(), set()
    for spec in specs:
        f, d = complete(spec, acceptable or b'nmar')
        files.update(f)
        dirs.update(d)
    files.update(dirs)
    ui.write(b'\n'.join(repo.pathto(p, cwd) for p in sorted(files)))
    ui.write(b'\n')


@command(
    b'debugpathcopies',
    cmdutil.walkopts,
    b'hg debugpathcopies REV1 REV2 [FILE]',
    inferrepo=True,
)
def debugpathcopies(ui, repo, rev1, rev2, *pats, **opts):
    """show copies between two revisions"""
    ctx1 = scmutil.revsingle(repo, rev1)
    ctx2 = scmutil.revsingle(repo, rev2)
    m = scmutil.match(ctx1, pats, opts)
    for dst, src in sorted(copies.pathcopies(ctx1, ctx2, m).items()):
        ui.write(b'%s -> %s\n' % (src, dst))


@command(b'debugpeer', [], _(b'PATH'), norepo=True)
def debugpeer(ui, path):
    """establish a connection to a peer repository"""
    # Always enable peer request logging. Requires --debug to display
    # though.
    overrides = {
        (b'devel', b'debug.peer-request'): True,
    }

    with ui.configoverride(overrides):
        peer = hg.peer(ui, {}, path)

        local = peer.local() is not None
        canpush = peer.canpush()

        ui.write(_(b'url: %s\n') % peer.url())
        ui.write(_(b'local: %s\n') % (_(b'yes') if local else _(b'no')))
        ui.write(_(b'pushable: %s\n') % (_(b'yes') if canpush else _(b'no')))


@command(
    b'debugpickmergetool',
    [
        (b'r', b'rev', b'', _(b'check for files in this revision'), _(b'REV')),
        (b'', b'changedelete', None, _(b'emulate merging change and delete')),
    ]
    + cmdutil.walkopts
    + cmdutil.mergetoolopts,
    _(b'[PATTERN]...'),
    inferrepo=True,
)
def debugpickmergetool(ui, repo, *pats, **opts):
    """examine which merge tool is chosen for specified file

    As described in :hg:`help merge-tools`, Mercurial examines
    configurations below in this order to decide which merge tool is
    chosen for specified file.

    1. ``--tool`` option
    2. ``HGMERGE`` environment variable
    3. configurations in ``merge-patterns`` section
    4. configuration of ``ui.merge``
    5. configurations in ``merge-tools`` section
    6. ``hgmerge`` tool (for historical reason only)
    7. default tool for fallback (``:merge`` or ``:prompt``)

    This command writes out examination result in the style below::

        FILE = MERGETOOL

    By default, all files known in the first parent context of the
    working directory are examined. Use file patterns and/or -I/-X
    options to limit target files. -r/--rev is also useful to examine
    files in another context without actual updating to it.

    With --debug, this command shows warning messages while matching
    against ``merge-patterns`` and so on, too. It is recommended to
    use this option with explicit file patterns and/or -I/-X options,
    because this option increases amount of output per file according
    to configurations in hgrc.

    With -v/--verbose, this command shows configurations below at
    first (only if specified).

    - ``--tool`` option
    - ``HGMERGE`` environment variable
    - configuration of ``ui.merge``

    If merge tool is chosen before matching against
    ``merge-patterns``, this command can't show any helpful
    information, even with --debug. In such case, information above is
    useful to know why a merge tool is chosen.
    """
    opts = pycompat.byteskwargs(opts)
    overrides = {}
    if opts[b'tool']:
        overrides[(b'ui', b'forcemerge')] = opts[b'tool']
        ui.notenoi18n(b'with --tool %r\n' % (pycompat.bytestr(opts[b'tool'])))

    with ui.configoverride(overrides, b'debugmergepatterns'):
        hgmerge = encoding.environ.get(b"HGMERGE")
        if hgmerge is not None:
            ui.notenoi18n(b'with HGMERGE=%r\n' % (pycompat.bytestr(hgmerge)))
        uimerge = ui.config(b"ui", b"merge")
        if uimerge:
            ui.notenoi18n(b'with ui.merge=%r\n' % (pycompat.bytestr(uimerge)))

        ctx = scmutil.revsingle(repo, opts.get(b'rev'))
        m = scmutil.match(ctx, pats, opts)
        changedelete = opts[b'changedelete']
        for path in ctx.walk(m):
            fctx = ctx[path]
            try:
                if not ui.debugflag:
                    ui.pushbuffer(error=True)
                tool, toolpath = filemerge._picktool(
                    repo,
                    ui,
                    path,
                    fctx.isbinary(),
                    b'l' in fctx.flags(),
                    changedelete,
                )
            finally:
                if not ui.debugflag:
                    ui.popbuffer()
            ui.write(b'%s = %s\n' % (path, tool))


@command(b'debugpushkey', [], _(b'REPO NAMESPACE [KEY OLD NEW]'), norepo=True)
def debugpushkey(ui, repopath, namespace, *keyinfo, **opts):
    '''access the pushkey key/value protocol

    With two args, list the keys in the given namespace.

    With five args, set a key to new if it currently is set to old.
    Reports success or failure.
    '''

    target = hg.peer(ui, {}, repopath)
    if keyinfo:
        key, old, new = keyinfo
        with target.commandexecutor() as e:
            r = e.callcommand(
                b'pushkey',
                {
                    b'namespace': namespace,
                    b'key': key,
                    b'old': old,
                    b'new': new,
                },
            ).result()

        ui.status(pycompat.bytestr(r) + b'\n')
        return not r
    else:
        for k, v in sorted(pycompat.iteritems(target.listkeys(namespace))):
            ui.write(
                b"%s\t%s\n" % (stringutil.escapestr(k), stringutil.escapestr(v))
            )


@command(b'debugpvec', [], _(b'A B'))
def debugpvec(ui, repo, a, b=None):
    ca = scmutil.revsingle(repo, a)
    cb = scmutil.revsingle(repo, b)
    pa = pvec.ctxpvec(ca)
    pb = pvec.ctxpvec(cb)
    if pa == pb:
        rel = b"="
    elif pa > pb:
        rel = b">"
    elif pa < pb:
        rel = b"<"
    elif pa | pb:
        rel = b"|"
    ui.write(_(b"a: %s\n") % pa)
    ui.write(_(b"b: %s\n") % pb)
    ui.write(_(b"depth(a): %d depth(b): %d\n") % (pa._depth, pb._depth))
    ui.write(
        _(b"delta: %d hdist: %d distance: %d relation: %s\n")
        % (
            abs(pa._depth - pb._depth),
            pvec._hamming(pa._vec, pb._vec),
            pa.distance(pb),
            rel,
        )
    )


@command(
    b'debugrebuilddirstate|debugrebuildstate',
    [
        (b'r', b'rev', b'', _(b'revision to rebuild to'), _(b'REV')),
        (
            b'',
            b'minimal',
            None,
            _(
                b'only rebuild files that are inconsistent with '
                b'the working copy parent'
            ),
        ),
    ],
    _(b'[-r REV]'),
)
def debugrebuilddirstate(ui, repo, rev, **opts):
    """rebuild the dirstate as it would look like for the given revision

    If no revision is specified the first current parent will be used.

    The dirstate will be set to the files of the given revision.
    The actual working directory content or existing dirstate
    information such as adds or removes is not considered.

    ``minimal`` will only rebuild the dirstate status for files that claim to be
    tracked but are not in the parent manifest, or that exist in the parent
    manifest but are not in the dirstate. It will not change adds, removes, or
    modified files that are in the working copy parent.

    One use of this command is to make the next :hg:`status` invocation
    check the actual file content.
    """
    ctx = scmutil.revsingle(repo, rev)
    with repo.wlock():
        dirstate = repo.dirstate
        changedfiles = None
        # See command doc for what minimal does.
        if opts.get('minimal'):
            manifestfiles = set(ctx.manifest().keys())
            dirstatefiles = set(dirstate)
            manifestonly = manifestfiles - dirstatefiles
            dsonly = dirstatefiles - manifestfiles
            dsnotadded = {f for f in dsonly if dirstate[f] != b'a'}
            changedfiles = manifestonly | dsnotadded

        dirstate.rebuild(ctx.node(), ctx.manifest(), changedfiles)


@command(b'debugrebuildfncache', [], b'')
def debugrebuildfncache(ui, repo):
    """rebuild the fncache file"""
    repair.rebuildfncache(ui, repo)


@command(
    b'debugrename',
    [(b'r', b'rev', b'', _(b'revision to debug'), _(b'REV'))],
    _(b'[-r REV] [FILE]...'),
)
def debugrename(ui, repo, *pats, **opts):
    """dump rename information"""

    opts = pycompat.byteskwargs(opts)
    ctx = scmutil.revsingle(repo, opts.get(b'rev'))
    m = scmutil.match(ctx, pats, opts)
    for abs in ctx.walk(m):
        fctx = ctx[abs]
        o = fctx.filelog().renamed(fctx.filenode())
        rel = repo.pathto(abs)
        if o:
            ui.write(_(b"%s renamed from %s:%s\n") % (rel, o[0], hex(o[1])))
        else:
            ui.write(_(b"%s not renamed\n") % rel)


@command(b'debugrequires|debugrequirements', [], b'')
def debugrequirements(ui, repo):
    """ print the current repo requirements """
    for r in sorted(repo.requirements):
        ui.write(b"%s\n" % r)


@command(
    b'debugrevlog',
    cmdutil.debugrevlogopts + [(b'd', b'dump', False, _(b'dump index data'))],
    _(b'-c|-m|FILE'),
    optionalrepo=True,
)
def debugrevlog(ui, repo, file_=None, **opts):
    """show data and statistics about a revlog"""
    opts = pycompat.byteskwargs(opts)
    r = cmdutil.openrevlog(repo, b'debugrevlog', file_, opts)

    if opts.get(b"dump"):
        numrevs = len(r)
        ui.write(
            (
                b"# rev p1rev p2rev start   end deltastart base   p1   p2"
                b" rawsize totalsize compression heads chainlen\n"
            )
        )
        ts = 0
        heads = set()

        for rev in pycompat.xrange(numrevs):
            dbase = r.deltaparent(rev)
            if dbase == -1:
                dbase = rev
            cbase = r.chainbase(rev)
            clen = r.chainlen(rev)
            p1, p2 = r.parentrevs(rev)
            rs = r.rawsize(rev)
            ts = ts + rs
            heads -= set(r.parentrevs(rev))
            heads.add(rev)
            try:
                compression = ts / r.end(rev)
            except ZeroDivisionError:
                compression = 0
            ui.write(
                b"%5d %5d %5d %5d %5d %10d %4d %4d %4d %7d %9d "
                b"%11d %5d %8d\n"
                % (
                    rev,
                    p1,
                    p2,
                    r.start(rev),
                    r.end(rev),
                    r.start(dbase),
                    r.start(cbase),
                    r.start(p1),
                    r.start(p2),
                    rs,
                    ts,
                    compression,
                    len(heads),
                    clen,
                )
            )
        return 0

    v = r.version
    format = v & 0xFFFF
    flags = []
    gdelta = False
    if v & revlog.FLAG_INLINE_DATA:
        flags.append(b'inline')
    if v & revlog.FLAG_GENERALDELTA:
        gdelta = True
        flags.append(b'generaldelta')
    if not flags:
        flags = [b'(none)']

    ### tracks merge vs single parent
    nummerges = 0

    ### tracks ways the "delta" are build
    # nodelta
    numempty = 0
    numemptytext = 0
    numemptydelta = 0
    # full file content
    numfull = 0
    # intermediate snapshot against a prior snapshot
    numsemi = 0
    # snapshot count per depth
    numsnapdepth = collections.defaultdict(lambda: 0)
    # delta against previous revision
    numprev = 0
    # delta against first or second parent (not prev)
    nump1 = 0
    nump2 = 0
    # delta against neither prev nor parents
    numother = 0
    # delta against prev that are also first or second parent
    # (details of `numprev`)
    nump1prev = 0
    nump2prev = 0

    # data about delta chain of each revs
    chainlengths = []
    chainbases = []
    chainspans = []

    # data about each revision
    datasize = [None, 0, 0]
    fullsize = [None, 0, 0]
    semisize = [None, 0, 0]
    # snapshot count per depth
    snapsizedepth = collections.defaultdict(lambda: [None, 0, 0])
    deltasize = [None, 0, 0]
    chunktypecounts = {}
    chunktypesizes = {}

    def addsize(size, l):
        if l[0] is None or size < l[0]:
            l[0] = size
        if size > l[1]:
            l[1] = size
        l[2] += size

    numrevs = len(r)
    for rev in pycompat.xrange(numrevs):
        p1, p2 = r.parentrevs(rev)
        delta = r.deltaparent(rev)
        if format > 0:
            addsize(r.rawsize(rev), datasize)
        if p2 != nullrev:
            nummerges += 1
        size = r.length(rev)
        if delta == nullrev:
            chainlengths.append(0)
            chainbases.append(r.start(rev))
            chainspans.append(size)
            if size == 0:
                numempty += 1
                numemptytext += 1
            else:
                numfull += 1
                numsnapdepth[0] += 1
                addsize(size, fullsize)
                addsize(size, snapsizedepth[0])
        else:
            chainlengths.append(chainlengths[delta] + 1)
            baseaddr = chainbases[delta]
            revaddr = r.start(rev)
            chainbases.append(baseaddr)
            chainspans.append((revaddr - baseaddr) + size)
            if size == 0:
                numempty += 1
                numemptydelta += 1
            elif r.issnapshot(rev):
                addsize(size, semisize)
                numsemi += 1
                depth = r.snapshotdepth(rev)
                numsnapdepth[depth] += 1
                addsize(size, snapsizedepth[depth])
            else:
                addsize(size, deltasize)
                if delta == rev - 1:
                    numprev += 1
                    if delta == p1:
                        nump1prev += 1
                    elif delta == p2:
                        nump2prev += 1
                elif delta == p1:
                    nump1 += 1
                elif delta == p2:
                    nump2 += 1
                elif delta != nullrev:
                    numother += 1

        # Obtain data on the raw chunks in the revlog.
        if util.safehasattr(r, b'_getsegmentforrevs'):
            segment = r._getsegmentforrevs(rev, rev)[1]
        else:
            segment = r._revlog._getsegmentforrevs(rev, rev)[1]
        if segment:
            chunktype = bytes(segment[0:1])
        else:
            chunktype = b'empty'

        if chunktype not in chunktypecounts:
            chunktypecounts[chunktype] = 0
            chunktypesizes[chunktype] = 0

        chunktypecounts[chunktype] += 1
        chunktypesizes[chunktype] += size

    # Adjust size min value for empty cases
    for size in (datasize, fullsize, semisize, deltasize):
        if size[0] is None:
            size[0] = 0

    numdeltas = numrevs - numfull - numempty - numsemi
    numoprev = numprev - nump1prev - nump2prev
    totalrawsize = datasize[2]
    datasize[2] /= numrevs
    fulltotal = fullsize[2]
    if numfull == 0:
        fullsize[2] = 0
    else:
        fullsize[2] /= numfull
    semitotal = semisize[2]
    snaptotal = {}
    if numsemi > 0:
        semisize[2] /= numsemi
    for depth in snapsizedepth:
        snaptotal[depth] = snapsizedepth[depth][2]
        snapsizedepth[depth][2] /= numsnapdepth[depth]

    deltatotal = deltasize[2]
    if numdeltas > 0:
        deltasize[2] /= numdeltas
    totalsize = fulltotal + semitotal + deltatotal
    avgchainlen = sum(chainlengths) / numrevs
    maxchainlen = max(chainlengths)
    maxchainspan = max(chainspans)
    compratio = 1
    if totalsize:
        compratio = totalrawsize / totalsize

    basedfmtstr = b'%%%dd\n'
    basepcfmtstr = b'%%%dd %s(%%5.2f%%%%)\n'

    def dfmtstr(max):
        return basedfmtstr % len(str(max))

    def pcfmtstr(max, padding=0):
        return basepcfmtstr % (len(str(max)), b' ' * padding)

    def pcfmt(value, total):
        if total:
            return (value, 100 * float(value) / total)
        else:
            return value, 100.0

    ui.writenoi18n(b'format : %d\n' % format)
    ui.writenoi18n(b'flags  : %s\n' % b', '.join(flags))

    ui.write(b'\n')
    fmt = pcfmtstr(totalsize)
    fmt2 = dfmtstr(totalsize)
    ui.writenoi18n(b'revisions     : ' + fmt2 % numrevs)
    ui.writenoi18n(b'    merges    : ' + fmt % pcfmt(nummerges, numrevs))
    ui.writenoi18n(
        b'    normal    : ' + fmt % pcfmt(numrevs - nummerges, numrevs)
    )
    ui.writenoi18n(b'revisions     : ' + fmt2 % numrevs)
    ui.writenoi18n(b'    empty     : ' + fmt % pcfmt(numempty, numrevs))
    ui.writenoi18n(
        b'                   text  : '
        + fmt % pcfmt(numemptytext, numemptytext + numemptydelta)
    )
    ui.writenoi18n(
        b'                   delta : '
        + fmt % pcfmt(numemptydelta, numemptytext + numemptydelta)
    )
    ui.writenoi18n(
        b'    snapshot  : ' + fmt % pcfmt(numfull + numsemi, numrevs)
    )
    for depth in sorted(numsnapdepth):
        ui.write(
            (b'      lvl-%-3d :       ' % depth)
            + fmt % pcfmt(numsnapdepth[depth], numrevs)
        )
    ui.writenoi18n(b'    deltas    : ' + fmt % pcfmt(numdeltas, numrevs))
    ui.writenoi18n(b'revision size : ' + fmt2 % totalsize)
    ui.writenoi18n(
        b'    snapshot  : ' + fmt % pcfmt(fulltotal + semitotal, totalsize)
    )
    for depth in sorted(numsnapdepth):
        ui.write(
            (b'      lvl-%-3d :       ' % depth)
            + fmt % pcfmt(snaptotal[depth], totalsize)
        )
    ui.writenoi18n(b'    deltas    : ' + fmt % pcfmt(deltatotal, totalsize))

    def fmtchunktype(chunktype):
        if chunktype == b'empty':
            return b'    %s     : ' % chunktype
        elif chunktype in pycompat.bytestr(string.ascii_letters):
            return b'    0x%s (%s)  : ' % (hex(chunktype), chunktype)
        else:
            return b'    0x%s      : ' % hex(chunktype)

    ui.write(b'\n')
    ui.writenoi18n(b'chunks        : ' + fmt2 % numrevs)
    for chunktype in sorted(chunktypecounts):
        ui.write(fmtchunktype(chunktype))
        ui.write(fmt % pcfmt(chunktypecounts[chunktype], numrevs))
    ui.writenoi18n(b'chunks size   : ' + fmt2 % totalsize)
    for chunktype in sorted(chunktypecounts):
        ui.write(fmtchunktype(chunktype))
        ui.write(fmt % pcfmt(chunktypesizes[chunktype], totalsize))

    ui.write(b'\n')
    fmt = dfmtstr(max(avgchainlen, maxchainlen, maxchainspan, compratio))
    ui.writenoi18n(b'avg chain length  : ' + fmt % avgchainlen)
    ui.writenoi18n(b'max chain length  : ' + fmt % maxchainlen)
    ui.writenoi18n(b'max chain reach   : ' + fmt % maxchainspan)
    ui.writenoi18n(b'compression ratio : ' + fmt % compratio)

    if format > 0:
        ui.write(b'\n')
        ui.writenoi18n(
            b'uncompressed data size (min/max/avg) : %d / %d / %d\n'
            % tuple(datasize)
        )
    ui.writenoi18n(
        b'full revision size (min/max/avg)     : %d / %d / %d\n'
        % tuple(fullsize)
    )
    ui.writenoi18n(
        b'inter-snapshot size (min/max/avg)    : %d / %d / %d\n'
        % tuple(semisize)
    )
    for depth in sorted(snapsizedepth):
        if depth == 0:
            continue
        ui.writenoi18n(
            b'    level-%-3d (min/max/avg)          : %d / %d / %d\n'
            % ((depth,) + tuple(snapsizedepth[depth]))
        )
    ui.writenoi18n(
        b'delta size (min/max/avg)             : %d / %d / %d\n'
        % tuple(deltasize)
    )

    if numdeltas > 0:
        ui.write(b'\n')
        fmt = pcfmtstr(numdeltas)
        fmt2 = pcfmtstr(numdeltas, 4)
        ui.writenoi18n(
            b'deltas against prev  : ' + fmt % pcfmt(numprev, numdeltas)
        )
        if numprev > 0:
            ui.writenoi18n(
                b'    where prev = p1  : ' + fmt2 % pcfmt(nump1prev, numprev)
            )
            ui.writenoi18n(
                b'    where prev = p2  : ' + fmt2 % pcfmt(nump2prev, numprev)
            )
            ui.writenoi18n(
                b'    other            : ' + fmt2 % pcfmt(numoprev, numprev)
            )
        if gdelta:
            ui.writenoi18n(
                b'deltas against p1    : ' + fmt % pcfmt(nump1, numdeltas)
            )
            ui.writenoi18n(
                b'deltas against p2    : ' + fmt % pcfmt(nump2, numdeltas)
            )
            ui.writenoi18n(
                b'deltas against other : ' + fmt % pcfmt(numother, numdeltas)
            )


@command(
    b'debugrevlogindex',
    cmdutil.debugrevlogopts
    + [(b'f', b'format', 0, _(b'revlog format'), _(b'FORMAT'))],
    _(b'[-f FORMAT] -c|-m|FILE'),
    optionalrepo=True,
)
def debugrevlogindex(ui, repo, file_=None, **opts):
    """dump the contents of a revlog index"""
    opts = pycompat.byteskwargs(opts)
    r = cmdutil.openrevlog(repo, b'debugrevlogindex', file_, opts)
    format = opts.get(b'format', 0)
    if format not in (0, 1):
        raise error.Abort(_(b"unknown format %d") % format)

    if ui.debugflag:
        shortfn = hex
    else:
        shortfn = short

    # There might not be anything in r, so have a sane default
    idlen = 12
    for i in r:
        idlen = len(shortfn(r.node(i)))
        break

    if format == 0:
        if ui.verbose:
            ui.writenoi18n(
                b"   rev    offset  length linkrev %s %s p2\n"
                % (b"nodeid".ljust(idlen), b"p1".ljust(idlen))
            )
        else:
            ui.writenoi18n(
                b"   rev linkrev %s %s p2\n"
                % (b"nodeid".ljust(idlen), b"p1".ljust(idlen))
            )
    elif format == 1:
        if ui.verbose:
            ui.writenoi18n(
                (
                    b"   rev flag   offset   length     size   link     p1"
                    b"     p2 %s\n"
                )
                % b"nodeid".rjust(idlen)
            )
        else:
            ui.writenoi18n(
                b"   rev flag     size   link     p1     p2 %s\n"
                % b"nodeid".rjust(idlen)
            )

    for i in r:
        node = r.node(i)
        if format == 0:
            try:
                pp = r.parents(node)
            except Exception:
                pp = [nullid, nullid]
            if ui.verbose:
                ui.write(
                    b"% 6d % 9d % 7d % 7d %s %s %s\n"
                    % (
                        i,
                        r.start(i),
                        r.length(i),
                        r.linkrev(i),
                        shortfn(node),
                        shortfn(pp[0]),
                        shortfn(pp[1]),
                    )
                )
            else:
                ui.write(
                    b"% 6d % 7d %s %s %s\n"
                    % (
                        i,
                        r.linkrev(i),
                        shortfn(node),
                        shortfn(pp[0]),
                        shortfn(pp[1]),
                    )
                )
        elif format == 1:
            pr = r.parentrevs(i)
            if ui.verbose:
                ui.write(
                    b"% 6d %04x % 8d % 8d % 8d % 6d % 6d % 6d %s\n"
                    % (
                        i,
                        r.flags(i),
                        r.start(i),
                        r.length(i),
                        r.rawsize(i),
                        r.linkrev(i),
                        pr[0],
                        pr[1],
                        shortfn(node),
                    )
                )
            else:
                ui.write(
                    b"% 6d %04x % 8d % 6d % 6d % 6d %s\n"
                    % (
                        i,
                        r.flags(i),
                        r.rawsize(i),
                        r.linkrev(i),
                        pr[0],
                        pr[1],
                        shortfn(node),
                    )
                )


@command(
    b'debugrevspec',
    [
        (
            b'',
            b'optimize',
            None,
            _(b'print parsed tree after optimizing (DEPRECATED)'),
        ),
        (
            b'',
            b'show-revs',
            True,
            _(b'print list of result revisions (default)'),
        ),
        (
            b's',
            b'show-set',
            None,
            _(b'print internal representation of result set'),
        ),
        (
            b'p',
            b'show-stage',
            [],
            _(b'print parsed tree at the given stage'),
            _(b'NAME'),
        ),
        (b'', b'no-optimized', False, _(b'evaluate tree without optimization')),
        (b'', b'verify-optimized', False, _(b'verify optimized result')),
    ],
    b'REVSPEC',
)
def debugrevspec(ui, repo, expr, **opts):
    """parse and apply a revision specification

    Use -p/--show-stage option to print the parsed tree at the given stages.
    Use -p all to print tree at every stage.

    Use --no-show-revs option with -s or -p to print only the set
    representation or the parsed tree respectively.

    Use --verify-optimized to compare the optimized result with the unoptimized
    one. Returns 1 if the optimized result differs.
    """
    opts = pycompat.byteskwargs(opts)
    aliases = ui.configitems(b'revsetalias')
    stages = [
        (b'parsed', lambda tree: tree),
        (
            b'expanded',
            lambda tree: revsetlang.expandaliases(tree, aliases, ui.warn),
        ),
        (b'concatenated', revsetlang.foldconcat),
        (b'analyzed', revsetlang.analyze),
        (b'optimized', revsetlang.optimize),
    ]
    if opts[b'no_optimized']:
        stages = stages[:-1]
    if opts[b'verify_optimized'] and opts[b'no_optimized']:
        raise error.Abort(
            _(b'cannot use --verify-optimized with --no-optimized')
        )
    stagenames = {n for n, f in stages}

    showalways = set()
    showchanged = set()
    if ui.verbose and not opts[b'show_stage']:
        # show parsed tree by --verbose (deprecated)
        showalways.add(b'parsed')
        showchanged.update([b'expanded', b'concatenated'])
        if opts[b'optimize']:
            showalways.add(b'optimized')
    if opts[b'show_stage'] and opts[b'optimize']:
        raise error.Abort(_(b'cannot use --optimize with --show-stage'))
    if opts[b'show_stage'] == [b'all']:
        showalways.update(stagenames)
    else:
        for n in opts[b'show_stage']:
            if n not in stagenames:
                raise error.Abort(_(b'invalid stage name: %s') % n)
        showalways.update(opts[b'show_stage'])

    treebystage = {}
    printedtree = None
    tree = revsetlang.parse(expr, lookup=revset.lookupfn(repo))
    for n, f in stages:
        treebystage[n] = tree = f(tree)
        if n in showalways or (n in showchanged and tree != printedtree):
            if opts[b'show_stage'] or n != b'parsed':
                ui.write(b"* %s:\n" % n)
            ui.write(revsetlang.prettyformat(tree), b"\n")
            printedtree = tree

    if opts[b'verify_optimized']:
        arevs = revset.makematcher(treebystage[b'analyzed'])(repo)
        brevs = revset.makematcher(treebystage[b'optimized'])(repo)
        if opts[b'show_set'] or (opts[b'show_set'] is None and ui.verbose):
            ui.writenoi18n(
                b"* analyzed set:\n", stringutil.prettyrepr(arevs), b"\n"
            )
            ui.writenoi18n(
                b"* optimized set:\n", stringutil.prettyrepr(brevs), b"\n"
            )
        arevs = list(arevs)
        brevs = list(brevs)
        if arevs == brevs:
            return 0
        ui.writenoi18n(b'--- analyzed\n', label=b'diff.file_a')
        ui.writenoi18n(b'+++ optimized\n', label=b'diff.file_b')
        sm = difflib.SequenceMatcher(None, arevs, brevs)
        for tag, alo, ahi, blo, bhi in sm.get_opcodes():
            if tag in ('delete', 'replace'):
                for c in arevs[alo:ahi]:
                    ui.write(b'-%d\n' % c, label=b'diff.deleted')
            if tag in ('insert', 'replace'):
                for c in brevs[blo:bhi]:
                    ui.write(b'+%d\n' % c, label=b'diff.inserted')
            if tag == 'equal':
                for c in arevs[alo:ahi]:
                    ui.write(b' %d\n' % c)
        return 1

    func = revset.makematcher(tree)
    revs = func(repo)
    if opts[b'show_set'] or (opts[b'show_set'] is None and ui.verbose):
        ui.writenoi18n(b"* set:\n", stringutil.prettyrepr(revs), b"\n")
    if not opts[b'show_revs']:
        return
    for c in revs:
        ui.write(b"%d\n" % c)


@command(
    b'debugserve',
    [
        (
            b'',
            b'sshstdio',
            False,
            _(b'run an SSH server bound to process handles'),
        ),
        (b'', b'logiofd', b'', _(b'file descriptor to log server I/O to')),
        (b'', b'logiofile', b'', _(b'file to log server I/O to')),
    ],
    b'',
)
def debugserve(ui, repo, **opts):
    """run a server with advanced settings

    This command is similar to :hg:`serve`. It exists partially as a
    workaround to the fact that ``hg serve --stdio`` must have specific
    arguments for security reasons.
    """
    opts = pycompat.byteskwargs(opts)

    if not opts[b'sshstdio']:
        raise error.Abort(_(b'only --sshstdio is currently supported'))

    logfh = None

    if opts[b'logiofd'] and opts[b'logiofile']:
        raise error.Abort(_(b'cannot use both --logiofd and --logiofile'))

    if opts[b'logiofd']:
        # Ideally we would be line buffered. But line buffering in binary
        # mode isn't supported and emits a warning in Python 3.8+. Disabling
        # buffering could have performance impacts. But since this isn't
        # performance critical code, it should be fine.
        try:
            logfh = os.fdopen(int(opts[b'logiofd']), 'ab', 0)
        except OSError as e:
            if e.errno != errno.ESPIPE:
                raise
            # can't seek a pipe, so `ab` mode fails on py3
            logfh = os.fdopen(int(opts[b'logiofd']), 'wb', 0)
    elif opts[b'logiofile']:
        logfh = open(opts[b'logiofile'], b'ab', 0)

    s = wireprotoserver.sshserver(ui, repo, logfh=logfh)
    s.serve_forever()


@command(b'debugsetparents', [], _(b'REV1 [REV2]'))
def debugsetparents(ui, repo, rev1, rev2=None):
    """manually set the parents of the current working directory

    This is useful for writing repository conversion tools, but should
    be used with care. For example, neither the working directory nor the
    dirstate is updated, so file status may be incorrect after running this
    command.

    Returns 0 on success.
    """

    node1 = scmutil.revsingle(repo, rev1).node()
    node2 = scmutil.revsingle(repo, rev2, b'null').node()

    with repo.wlock():
        repo.setparents(node1, node2)


@command(b'debugsidedata', cmdutil.debugrevlogopts, _(b'-c|-m|FILE REV'))
def debugsidedata(ui, repo, file_, rev=None, **opts):
    """dump the side data for a cl/manifest/file revision

    Use --verbose to dump the sidedata content."""
    opts = pycompat.byteskwargs(opts)
    if opts.get(b'changelog') or opts.get(b'manifest') or opts.get(b'dir'):
        if rev is not None:
            raise error.CommandError(b'debugdata', _(b'invalid arguments'))
        file_, rev = None, file_
    elif rev is None:
        raise error.CommandError(b'debugdata', _(b'invalid arguments'))
    r = cmdutil.openstorage(repo, b'debugdata', file_, opts)
    r = getattr(r, '_revlog', r)
    try:
        sidedata = r.sidedata(r.lookup(rev))
    except KeyError:
        raise error.Abort(_(b'invalid revision identifier %s') % rev)
    if sidedata:
        sidedata = list(sidedata.items())
        sidedata.sort()
        ui.writenoi18n(b'%d sidedata entries\n' % len(sidedata))
        for key, value in sidedata:
            ui.writenoi18n(b' entry-%04o size %d\n' % (key, len(value)))
            if ui.verbose:
                ui.writenoi18n(b'  %s\n' % stringutil.pprint(value))


@command(b'debugssl', [], b'[SOURCE]', optionalrepo=True)
def debugssl(ui, repo, source=None, **opts):
    '''test a secure connection to a server

    This builds the certificate chain for the server on Windows, installing the
    missing intermediates and trusted root via Windows Update if necessary.  It
    does nothing on other platforms.

    If SOURCE is omitted, the 'default' path will be used.  If a URL is given,
    that server is used. See :hg:`help urls` for more information.

    If the update succeeds, retry the original operation.  Otherwise, the cause
    of the SSL error is likely another issue.
    '''
    if not pycompat.iswindows:
        raise error.Abort(
            _(b'certificate chain building is only possible on Windows')
        )

    if not source:
        if not repo:
            raise error.Abort(
                _(
                    b"there is no Mercurial repository here, and no "
                    b"server specified"
                )
            )
        source = b"default"

    source, branches = hg.parseurl(ui.expandpath(source))
    url = util.url(source)

    defaultport = {b'https': 443, b'ssh': 22}
    if url.scheme in defaultport:
        try:
            addr = (url.host, int(url.port or defaultport[url.scheme]))
        except ValueError:
            raise error.Abort(_(b"malformed port number in URL"))
    else:
        raise error.Abort(_(b"only https and ssh connections are supported"))

    from . import win32

    s = ssl.wrap_socket(
        socket.socket(),
        ssl_version=ssl.PROTOCOL_TLS,
        cert_reqs=ssl.CERT_NONE,
        ca_certs=None,
    )

    try:
        s.connect(addr)
        cert = s.getpeercert(True)

        ui.status(_(b'checking the certificate chain for %s\n') % url.host)

        complete = win32.checkcertificatechain(cert, build=False)

        if not complete:
            ui.status(_(b'certificate chain is incomplete, updating... '))

            if not win32.checkcertificatechain(cert):
                ui.status(_(b'failed.\n'))
            else:
                ui.status(_(b'done.\n'))
        else:
            ui.status(_(b'full certificate chain is available\n'))
    finally:
        s.close()


@command(
    b"debugbackupbundle",
    [
        (
            b"",
            b"recover",
            b"",
            b"brings the specified changeset back into the repository",
        )
    ]
    + cmdutil.logopts,
    _(b"hg debugbackupbundle [--recover HASH]"),
)
def debugbackupbundle(ui, repo, *pats, **opts):
    """lists the changesets available in backup bundles

    Without any arguments, this command prints a list of the changesets in each
    backup bundle.

    --recover takes a changeset hash and unbundles the first bundle that
    contains that hash, which puts that changeset back in your repository.

    --verbose will print the entire commit message and the bundle path for that
    backup.
    """
    backups = list(
        filter(
            os.path.isfile, glob.glob(repo.vfs.join(b"strip-backup") + b"/*.hg")
        )
    )
    backups.sort(key=lambda x: os.path.getmtime(x), reverse=True)

    opts = pycompat.byteskwargs(opts)
    opts[b"bundle"] = b""
    opts[b"force"] = None
    limit = logcmdutil.getlimit(opts)

    def display(other, chlist, displayer):
        if opts.get(b"newest_first"):
            chlist.reverse()
        count = 0
        for n in chlist:
            if limit is not None and count >= limit:
                break
            parents = [True for p in other.changelog.parents(n) if p != nullid]
            if opts.get(b"no_merges") and len(parents) == 2:
                continue
            count += 1
            displayer.show(other[n])

    recovernode = opts.get(b"recover")
    if recovernode:
        if scmutil.isrevsymbol(repo, recovernode):
            ui.warn(_(b"%s already exists in the repo\n") % recovernode)
            return
    elif backups:
        msg = _(
            b"Recover changesets using: hg debugbackupbundle --recover "
            b"<changeset hash>\n\nAvailable backup changesets:"
        )
        ui.status(msg, label=b"status.removed")
    else:
        ui.status(_(b"no backup changesets found\n"))
        return

    for backup in backups:
        # Much of this is copied from the hg incoming logic
        source = ui.expandpath(os.path.relpath(backup, encoding.getcwd()))
        source, branches = hg.parseurl(source, opts.get(b"branch"))
        try:
            other = hg.peer(repo, opts, source)
        except error.LookupError as ex:
            msg = _(b"\nwarning: unable to open bundle %s") % source
            hint = _(b"\n(missing parent rev %s)\n") % short(ex.name)
            ui.warn(msg, hint=hint)
            continue
        revs, checkout = hg.addbranchrevs(
            repo, other, branches, opts.get(b"rev")
        )

        if revs:
            revs = [other.lookup(rev) for rev in revs]

        quiet = ui.quiet
        try:
            ui.quiet = True
            other, chlist, cleanupfn = bundlerepo.getremotechanges(
                ui, repo, other, revs, opts[b"bundle"], opts[b"force"]
            )
        except error.LookupError:
            continue
        finally:
            ui.quiet = quiet

        try:
            if not chlist:
                continue
            if recovernode:
                with repo.lock(), repo.transaction(b"unbundle") as tr:
                    if scmutil.isrevsymbol(other, recovernode):
                        ui.status(_(b"Unbundling %s\n") % (recovernode))
                        f = hg.openpath(ui, source)
                        gen = exchange.readbundle(ui, f, source)
                        if isinstance(gen, bundle2.unbundle20):
                            bundle2.applybundle(
                                repo,
                                gen,
                                tr,
                                source=b"unbundle",
                                url=b"bundle:" + source,
                            )
                        else:
                            gen.apply(repo, b"unbundle", b"bundle:" + source)
                        break
            else:
                backupdate = encoding.strtolocal(
                    time.strftime(
                        "%a %H:%M, %Y-%m-%d",
                        time.localtime(os.path.getmtime(source)),
                    )
                )
                ui.status(b"\n%s\n" % (backupdate.ljust(50)))
                if ui.verbose:
                    ui.status(b"%s%s\n" % (b"bundle:".ljust(13), source))
                else:
                    opts[
                        b"template"
                    ] = b"{label('status.modified', node|short)} {desc|firstline}\n"
                displayer = logcmdutil.changesetdisplayer(
                    ui, other, opts, False
                )
                display(other, chlist, displayer)
                displayer.close()
        finally:
            cleanupfn()


@command(
    b'debugsub',
    [(b'r', b'rev', b'', _(b'revision to check'), _(b'REV'))],
    _(b'[-r REV] [REV]'),
)
def debugsub(ui, repo, rev=None):
    ctx = scmutil.revsingle(repo, rev, None)
    for k, v in sorted(ctx.substate.items()):
        ui.writenoi18n(b'path %s\n' % k)
        ui.writenoi18n(b' source   %s\n' % v[0])
        ui.writenoi18n(b' revision %s\n' % v[1])


@command(
    b'debugsuccessorssets',
    [(b'', b'closest', False, _(b'return closest successors sets only'))],
    _(b'[REV]'),
)
def debugsuccessorssets(ui, repo, *revs, **opts):
    """show set of successors for revision

    A successors set of changeset A is a consistent group of revisions that
    succeed A. It contains non-obsolete changesets only unless closests
    successors set is set.

    In most cases a changeset A has a single successors set containing a single
    successor (changeset A replaced by A').

    A changeset that is made obsolete with no successors are called "pruned".
    Such changesets have no successors sets at all.

    A changeset that has been "split" will have a successors set containing
    more than one successor.

    A changeset that has been rewritten in multiple different ways is called
    "divergent". Such changesets have multiple successor sets (each of which
    may also be split, i.e. have multiple successors).

    Results are displayed as follows::

        <rev1>
            <successors-1A>
        <rev2>
            <successors-2A>
            <successors-2B1> <successors-2B2> <successors-2B3>

    Here rev2 has two possible (i.e. divergent) successors sets. The first
    holds one element, whereas the second holds three (i.e. the changeset has
    been split).
    """
    # passed to successorssets caching computation from one call to another
    cache = {}
    ctx2str = bytes
    node2str = short
    for rev in scmutil.revrange(repo, revs):
        ctx = repo[rev]
        ui.write(b'%s\n' % ctx2str(ctx))
        for succsset in obsutil.successorssets(
            repo, ctx.node(), closest=opts['closest'], cache=cache
        ):
            if succsset:
                ui.write(b'    ')
                ui.write(node2str(succsset[0]))
                for node in succsset[1:]:
                    ui.write(b' ')
                    ui.write(node2str(node))
            ui.write(b'\n')


@command(b'debugtagscache', [])
def debugtagscache(ui, repo):
    """display the contents of .hg/cache/hgtagsfnodes1"""
    cache = tagsmod.hgtagsfnodescache(repo.unfiltered())
    for r in repo:
        node = repo[r].node()
        tagsnode = cache.getfnode(node, computemissing=False)
        tagsnodedisplay = hex(tagsnode) if tagsnode else b'missing/invalid'
        ui.write(b'%d %s %s\n' % (r, hex(node), tagsnodedisplay))


@command(
    b'debugtemplate',
    [
        (b'r', b'rev', [], _(b'apply template on changesets'), _(b'REV')),
        (b'D', b'define', [], _(b'define template keyword'), _(b'KEY=VALUE')),
    ],
    _(b'[-r REV]... [-D KEY=VALUE]... TEMPLATE'),
    optionalrepo=True,
)
def debugtemplate(ui, repo, tmpl, **opts):
    """parse and apply a template

    If -r/--rev is given, the template is processed as a log template and
    applied to the given changesets. Otherwise, it is processed as a generic
    template.

    Use --verbose to print the parsed tree.
    """
    revs = None
    if opts['rev']:
        if repo is None:
            raise error.RepoError(
                _(b'there is no Mercurial repository here (.hg not found)')
            )
        revs = scmutil.revrange(repo, opts['rev'])

    props = {}
    for d in opts['define']:
        try:
            k, v = (e.strip() for e in d.split(b'=', 1))
            if not k or k == b'ui':
                raise ValueError
            props[k] = v
        except ValueError:
            raise error.Abort(_(b'malformed keyword definition: %s') % d)

    if ui.verbose:
        aliases = ui.configitems(b'templatealias')
        tree = templater.parse(tmpl)
        ui.note(templater.prettyformat(tree), b'\n')
        newtree = templater.expandaliases(tree, aliases)
        if newtree != tree:
            ui.notenoi18n(
                b"* expanded:\n", templater.prettyformat(newtree), b'\n'
            )

    if revs is None:
        tres = formatter.templateresources(ui, repo)
        t = formatter.maketemplater(ui, tmpl, resources=tres)
        if ui.verbose:
            kwds, funcs = t.symbolsuseddefault()
            ui.writenoi18n(b"* keywords: %s\n" % b', '.join(sorted(kwds)))
            ui.writenoi18n(b"* functions: %s\n" % b', '.join(sorted(funcs)))
        ui.write(t.renderdefault(props))
    else:
        displayer = logcmdutil.maketemplater(ui, repo, tmpl)
        if ui.verbose:
            kwds, funcs = displayer.t.symbolsuseddefault()
            ui.writenoi18n(b"* keywords: %s\n" % b', '.join(sorted(kwds)))
            ui.writenoi18n(b"* functions: %s\n" % b', '.join(sorted(funcs)))
        for r in revs:
            displayer.show(repo[r], **pycompat.strkwargs(props))
        displayer.close()


@command(
    b'debuguigetpass',
    [(b'p', b'prompt', b'', _(b'prompt text'), _(b'TEXT')),],
    _(b'[-p TEXT]'),
    norepo=True,
)
def debuguigetpass(ui, prompt=b''):
    """show prompt to type password"""
    r = ui.getpass(prompt)
    ui.writenoi18n(b'response: %s\n' % r)


@command(
    b'debuguiprompt',
    [(b'p', b'prompt', b'', _(b'prompt text'), _(b'TEXT')),],
    _(b'[-p TEXT]'),
    norepo=True,
)
def debuguiprompt(ui, prompt=b''):
    """show plain prompt"""
    r = ui.prompt(prompt)
    ui.writenoi18n(b'response: %s\n' % r)


@command(b'debugupdatecaches', [])
def debugupdatecaches(ui, repo, *pats, **opts):
    """warm all known caches in the repository"""
    with repo.wlock(), repo.lock():
        repo.updatecaches(full=True)


@command(
    b'debugupgraderepo',
    [
        (
            b'o',
            b'optimize',
            [],
            _(b'extra optimization to perform'),
            _(b'NAME'),
        ),
        (b'', b'run', False, _(b'performs an upgrade')),
        (b'', b'backup', True, _(b'keep the old repository content around')),
        (b'', b'changelog', None, _(b'select the changelog for upgrade')),
        (b'', b'manifest', None, _(b'select the manifest for upgrade')),
    ],
)
def debugupgraderepo(ui, repo, run=False, optimize=None, backup=True, **opts):
    """upgrade a repository to use different features

    If no arguments are specified, the repository is evaluated for upgrade
    and a list of problems and potential optimizations is printed.

    With ``--run``, a repository upgrade is performed. Behavior of the upgrade
    can be influenced via additional arguments. More details will be provided
    by the command output when run without ``--run``.

    During the upgrade, the repository will be locked and no writes will be
    allowed.

    At the end of the upgrade, the repository may not be readable while new
    repository data is swapped in. This window will be as long as it takes to
    rename some directories inside the ``.hg`` directory. On most machines, this
    should complete almost instantaneously and the chances of a consumer being
    unable to access the repository should be low.

    By default, all revlog will be upgraded. You can restrict this using flag
    such as `--manifest`:

      * `--manifest`: only optimize the manifest
      * `--no-manifest`: optimize all revlog but the manifest
      * `--changelog`: optimize the changelog only
      * `--no-changelog --no-manifest`: optimize filelogs only
    """
    return upgrade.upgraderepo(
        ui, repo, run=run, optimize=optimize, backup=backup, **opts
    )


@command(
    b'debugwalk', cmdutil.walkopts, _(b'[OPTION]... [FILE]...'), inferrepo=True
)
def debugwalk(ui, repo, *pats, **opts):
    """show how files match on given patterns"""
    opts = pycompat.byteskwargs(opts)
    m = scmutil.match(repo[None], pats, opts)
    if ui.verbose:
        ui.writenoi18n(b'* matcher:\n', stringutil.prettyrepr(m), b'\n')
    items = list(repo[None].walk(m))
    if not items:
        return
    f = lambda fn: fn
    if ui.configbool(b'ui', b'slash') and pycompat.ossep != b'/':
        f = lambda fn: util.normpath(fn)
    fmt = b'f  %%-%ds  %%-%ds  %%s' % (
        max([len(abs) for abs in items]),
        max([len(repo.pathto(abs)) for abs in items]),
    )
    for abs in items:
        line = fmt % (
            abs,
            f(repo.pathto(abs)),
            m.exact(abs) and b'exact' or b'',
        )
        ui.write(b"%s\n" % line.rstrip())


@command(b'debugwhyunstable', [], _(b'REV'))
def debugwhyunstable(ui, repo, rev):
    """explain instabilities of a changeset"""
    for entry in obsutil.whyunstable(repo, scmutil.revsingle(repo, rev)):
        dnodes = b''
        if entry.get(b'divergentnodes'):
            dnodes = (
                b' '.join(
                    b'%s (%s)' % (ctx.hex(), ctx.phasestr())
                    for ctx in entry[b'divergentnodes']
                )
                + b' '
            )
        ui.write(
            b'%s: %s%s %s\n'
            % (entry[b'instability'], dnodes, entry[b'reason'], entry[b'node'])
        )


@command(
    b'debugwireargs',
    [
        (b'', b'three', b'', b'three'),
        (b'', b'four', b'', b'four'),
        (b'', b'five', b'', b'five'),
    ]
    + cmdutil.remoteopts,
    _(b'REPO [OPTIONS]... [ONE [TWO]]'),
    norepo=True,
)
def debugwireargs(ui, repopath, *vals, **opts):
    opts = pycompat.byteskwargs(opts)
    repo = hg.peer(ui, opts, repopath)
    for opt in cmdutil.remoteopts:
        del opts[opt[1]]
    args = {}
    for k, v in pycompat.iteritems(opts):
        if v:
            args[k] = v
    args = pycompat.strkwargs(args)
    # run twice to check that we don't mess up the stream for the next command
    res1 = repo.debugwireargs(*vals, **args)
    res2 = repo.debugwireargs(*vals, **args)
    ui.write(b"%s\n" % res1)
    if res1 != res2:
        ui.warn(b"%s\n" % res2)


def _parsewirelangblocks(fh):
    activeaction = None
    blocklines = []
    lastindent = 0

    for line in fh:
        line = line.rstrip()
        if not line:
            continue

        if line.startswith(b'#'):
            continue

        if not line.startswith(b' '):
            # New block. Flush previous one.
            if activeaction:
                yield activeaction, blocklines

            activeaction = line
            blocklines = []
            lastindent = 0
            continue

        # Else we start with an indent.

        if not activeaction:
            raise error.Abort(_(b'indented line outside of block'))

        indent = len(line) - len(line.lstrip())

        # If this line is indented more than the last line, concatenate it.
        if indent > lastindent and blocklines:
            blocklines[-1] += line.lstrip()
        else:
            blocklines.append(line)
            lastindent = indent

    # Flush last block.
    if activeaction:
        yield activeaction, blocklines


@command(
    b'debugwireproto',
    [
        (b'', b'localssh', False, _(b'start an SSH server for this repo')),
        (b'', b'peer', b'', _(b'construct a specific version of the peer')),
        (
            b'',
            b'noreadstderr',
            False,
            _(b'do not read from stderr of the remote'),
        ),
        (
            b'',
            b'nologhandshake',
            False,
            _(b'do not log I/O related to the peer handshake'),
        ),
    ]
    + cmdutil.remoteopts,
    _(b'[PATH]'),
    optionalrepo=True,
)
def debugwireproto(ui, repo, path=None, **opts):
    """send wire protocol commands to a server

    This command can be used to issue wire protocol commands to remote
    peers and to debug the raw data being exchanged.

    ``--localssh`` will start an SSH server against the current repository
    and connect to that. By default, the connection will perform a handshake
    and establish an appropriate peer instance.

    ``--peer`` can be used to bypass the handshake protocol and construct a
    peer instance using the specified class type. Valid values are ``raw``,
    ``http2``, ``ssh1``, and ``ssh2``. ``raw`` instances only allow sending
    raw data payloads and don't support higher-level command actions.

    ``--noreadstderr`` can be used to disable automatic reading from stderr
    of the peer (for SSH connections only). Disabling automatic reading of
    stderr is useful for making output more deterministic.

    Commands are issued via a mini language which is specified via stdin.
    The language consists of individual actions to perform. An action is
    defined by a block. A block is defined as a line with no leading
    space followed by 0 or more lines with leading space. Blocks are
    effectively a high-level command with additional metadata.

    Lines beginning with ``#`` are ignored.

    The following sections denote available actions.

    raw
    ---

    Send raw data to the server.

    The block payload contains the raw data to send as one atomic send
    operation. The data may not actually be delivered in a single system
    call: it depends on the abilities of the transport being used.

    Each line in the block is de-indented and concatenated. Then, that
    value is evaluated as a Python b'' literal. This allows the use of
    backslash escaping, etc.

    raw+
    ----

    Behaves like ``raw`` except flushes output afterwards.

    command <X>
    -----------

    Send a request to run a named command, whose name follows the ``command``
    string.

    Arguments to the command are defined as lines in this block. The format of
    each line is ``<key> <value>``. e.g.::

       command listkeys
           namespace bookmarks

    If the value begins with ``eval:``, it will be interpreted as a Python
    literal expression. Otherwise values are interpreted as Python b'' literals.
    This allows sending complex types and encoding special byte sequences via
    backslash escaping.

    The following arguments have special meaning:

    ``PUSHFILE``
        When defined, the *push* mechanism of the peer will be used instead
        of the static request-response mechanism and the content of the
        file specified in the value of this argument will be sent as the
        command payload.

        This can be used to submit a local bundle file to the remote.

    batchbegin
    ----------

    Instruct the peer to begin a batched send.

    All ``command`` blocks are queued for execution until the next
    ``batchsubmit`` block.

    batchsubmit
    -----------

    Submit previously queued ``command`` blocks as a batch request.

    This action MUST be paired with a ``batchbegin`` action.

    httprequest <method> <path>
    ---------------------------

    (HTTP peer only)

    Send an HTTP request to the peer.

    The HTTP request line follows the ``httprequest`` action. e.g. ``GET /foo``.

    Arguments of the form ``<key>: <value>`` are interpreted as HTTP request
    headers to add to the request. e.g. ``Accept: foo``.

    The following arguments are special:

    ``BODYFILE``
        The content of the file defined as the value to this argument will be
        transferred verbatim as the HTTP request body.

    ``frame <type> <flags> <payload>``
        Send a unified protocol frame as part of the request body.

        All frames will be collected and sent as the body to the HTTP
        request.

    close
    -----

    Close the connection to the server.

    flush
    -----

    Flush data written to the server.

    readavailable
    -------------

    Close the write end of the connection and read all available data from
    the server.

    If the connection to the server encompasses multiple pipes, we poll both
    pipes and read available data.

    readline
    --------

    Read a line of output from the server. If there are multiple output
    pipes, reads only the main pipe.

    ereadline
    ---------

    Like ``readline``, but read from the stderr pipe, if available.

    read <X>
    --------

    ``read()`` N bytes from the server's main output pipe.

    eread <X>
    ---------

    ``read()`` N bytes from the server's stderr pipe, if available.

    Specifying Unified Frame-Based Protocol Frames
    ----------------------------------------------

    It is possible to emit a *Unified Frame-Based Protocol* by using special
    syntax.

    A frame is composed as a type, flags, and payload. These can be parsed
    from a string of the form:

       <request-id> <stream-id> <stream-flags> <type> <flags> <payload>

    ``request-id`` and ``stream-id`` are integers defining the request and
    stream identifiers.

    ``type`` can be an integer value for the frame type or the string name
    of the type. The strings are defined in ``wireprotoframing.py``. e.g.
    ``command-name``.

    ``stream-flags`` and ``flags`` are a ``|`` delimited list of flag
    components. Each component (and there can be just one) can be an integer
    or a flag name for stream flags or frame flags, respectively. Values are
    resolved to integers and then bitwise OR'd together.

    ``payload`` represents the raw frame payload. If it begins with
    ``cbor:``, the following string is evaluated as Python code and the
    resulting object is fed into a CBOR encoder. Otherwise it is interpreted
    as a Python byte string literal.
    """
    opts = pycompat.byteskwargs(opts)

    if opts[b'localssh'] and not repo:
        raise error.Abort(_(b'--localssh requires a repository'))

    if opts[b'peer'] and opts[b'peer'] not in (
        b'raw',
        b'http2',
        b'ssh1',
        b'ssh2',
    ):
        raise error.Abort(
            _(b'invalid value for --peer'),
            hint=_(b'valid values are "raw", "ssh1", and "ssh2"'),
        )

    if path and opts[b'localssh']:
        raise error.Abort(_(b'cannot specify --localssh with an explicit path'))

    if ui.interactive():
        ui.write(_(b'(waiting for commands on stdin)\n'))

    blocks = list(_parsewirelangblocks(ui.fin))

    proc = None
    stdin = None
    stdout = None
    stderr = None
    opener = None

    if opts[b'localssh']:
        # We start the SSH server in its own process so there is process
        # separation. This prevents a whole class of potential bugs around
        # shared state from interfering with server operation.
        args = procutil.hgcmd() + [
            b'-R',
            repo.root,
            b'debugserve',
            b'--sshstdio',
        ]
        proc = subprocess.Popen(
            pycompat.rapply(procutil.tonativestr, args),
            stdin=subprocess.PIPE,
            stdout=subprocess.PIPE,
            stderr=subprocess.PIPE,
            bufsize=0,
        )

        stdin = proc.stdin
        stdout = proc.stdout
        stderr = proc.stderr

        # We turn the pipes into observers so we can log I/O.
        if ui.verbose or opts[b'peer'] == b'raw':
            stdin = util.makeloggingfileobject(
                ui, proc.stdin, b'i', logdata=True
            )
            stdout = util.makeloggingfileobject(
                ui, proc.stdout, b'o', logdata=True
            )
            stderr = util.makeloggingfileobject(
                ui, proc.stderr, b'e', logdata=True
            )

        # --localssh also implies the peer connection settings.

        url = b'ssh://localserver'
        autoreadstderr = not opts[b'noreadstderr']

        if opts[b'peer'] == b'ssh1':
            ui.write(_(b'creating ssh peer for wire protocol version 1\n'))
            peer = sshpeer.sshv1peer(
                ui,
                url,
                proc,
                stdin,
                stdout,
                stderr,
                None,
                autoreadstderr=autoreadstderr,
            )
        elif opts[b'peer'] == b'ssh2':
            ui.write(_(b'creating ssh peer for wire protocol version 2\n'))
            peer = sshpeer.sshv2peer(
                ui,
                url,
                proc,
                stdin,
                stdout,
                stderr,
                None,
                autoreadstderr=autoreadstderr,
            )
        elif opts[b'peer'] == b'raw':
            ui.write(_(b'using raw connection to peer\n'))
            peer = None
        else:
            ui.write(_(b'creating ssh peer from handshake results\n'))
            peer = sshpeer.makepeer(
                ui,
                url,
                proc,
                stdin,
                stdout,
                stderr,
                autoreadstderr=autoreadstderr,
            )

    elif path:
        # We bypass hg.peer() so we can proxy the sockets.
        # TODO consider not doing this because we skip
        # ``hg.wirepeersetupfuncs`` and potentially other useful functionality.
        u = util.url(path)
        if u.scheme != b'http':
            raise error.Abort(_(b'only http:// paths are currently supported'))

        url, authinfo = u.authinfo()
        openerargs = {
            'useragent': b'Mercurial debugwireproto',
        }

        # Turn pipes/sockets into observers so we can log I/O.
        if ui.verbose:
            openerargs.update(
                {
                    'loggingfh': ui,
                    'loggingname': b's',
                    'loggingopts': {'logdata': True, 'logdataapis': False,},
                }
            )

        if ui.debugflag:
            openerargs['loggingopts']['logdataapis'] = True

        # Don't send default headers when in raw mode. This allows us to
        # bypass most of the behavior of our URL handling code so we can
        # have near complete control over what's sent on the wire.
        if opts[b'peer'] == b'raw':
            openerargs['sendaccept'] = False

        opener = urlmod.opener(ui, authinfo, **openerargs)

        if opts[b'peer'] == b'http2':
            ui.write(_(b'creating http peer for wire protocol version 2\n'))
            # We go through makepeer() because we need an API descriptor for
            # the peer instance to be useful.
            with ui.configoverride(
                {(b'experimental', b'httppeer.advertise-v2'): True}
            ):
                if opts[b'nologhandshake']:
                    ui.pushbuffer()

                peer = httppeer.makepeer(ui, path, opener=opener)

                if opts[b'nologhandshake']:
                    ui.popbuffer()

            if not isinstance(peer, httppeer.httpv2peer):
                raise error.Abort(
                    _(
                        b'could not instantiate HTTP peer for '
                        b'wire protocol version 2'
                    ),
                    hint=_(
                        b'the server may not have the feature '
                        b'enabled or is not allowing this '
                        b'client version'
                    ),
                )

        elif opts[b'peer'] == b'raw':
            ui.write(_(b'using raw connection to peer\n'))
            peer = None
        elif opts[b'peer']:
            raise error.Abort(
                _(b'--peer %s not supported with HTTP peers') % opts[b'peer']
            )
        else:
            peer = httppeer.makepeer(ui, path, opener=opener)

        # We /could/ populate stdin/stdout with sock.makefile()...
    else:
        raise error.Abort(_(b'unsupported connection configuration'))

    batchedcommands = None

    # Now perform actions based on the parsed wire language instructions.
    for action, lines in blocks:
        if action in (b'raw', b'raw+'):
            if not stdin:
                raise error.Abort(_(b'cannot call raw/raw+ on this peer'))

            # Concatenate the data together.
            data = b''.join(l.lstrip() for l in lines)
            data = stringutil.unescapestr(data)
            stdin.write(data)

            if action == b'raw+':
                stdin.flush()
        elif action == b'flush':
            if not stdin:
                raise error.Abort(_(b'cannot call flush on this peer'))
            stdin.flush()
        elif action.startswith(b'command'):
            if not peer:
                raise error.Abort(
                    _(
                        b'cannot send commands unless peer instance '
                        b'is available'
                    )
                )

            command = action.split(b' ', 1)[1]

            args = {}
            for line in lines:
                # We need to allow empty values.
                fields = line.lstrip().split(b' ', 1)
                if len(fields) == 1:
                    key = fields[0]
                    value = b''
                else:
                    key, value = fields

                if value.startswith(b'eval:'):
                    value = stringutil.evalpythonliteral(value[5:])
                else:
                    value = stringutil.unescapestr(value)

                args[key] = value

            if batchedcommands is not None:
                batchedcommands.append((command, args))
                continue

            ui.status(_(b'sending %s command\n') % command)

            if b'PUSHFILE' in args:
                with open(args[b'PUSHFILE'], 'rb') as fh:
                    del args[b'PUSHFILE']
                    res, output = peer._callpush(
                        command, fh, **pycompat.strkwargs(args)
                    )
                    ui.status(_(b'result: %s\n') % stringutil.escapestr(res))
                    ui.status(
                        _(b'remote output: %s\n') % stringutil.escapestr(output)
                    )
            else:
                with peer.commandexecutor() as e:
                    res = e.callcommand(command, args).result()

                if isinstance(res, wireprotov2peer.commandresponse):
                    val = res.objects()
                    ui.status(
                        _(b'response: %s\n')
                        % stringutil.pprint(val, bprefix=True, indent=2)
                    )
                else:
                    ui.status(
                        _(b'response: %s\n')
                        % stringutil.pprint(res, bprefix=True, indent=2)
                    )

        elif action == b'batchbegin':
            if batchedcommands is not None:
                raise error.Abort(_(b'nested batchbegin not allowed'))

            batchedcommands = []
        elif action == b'batchsubmit':
            # There is a batching API we could go through. But it would be
            # difficult to normalize requests into function calls. It is easier
            # to bypass this layer and normalize to commands + args.
            ui.status(
                _(b'sending batch with %d sub-commands\n')
                % len(batchedcommands)
            )
            assert peer is not None
            for i, chunk in enumerate(peer._submitbatch(batchedcommands)):
                ui.status(
                    _(b'response #%d: %s\n') % (i, stringutil.escapestr(chunk))
                )

            batchedcommands = None

        elif action.startswith(b'httprequest '):
            if not opener:
                raise error.Abort(
                    _(b'cannot use httprequest without an HTTP peer')
                )

            request = action.split(b' ', 2)
            if len(request) != 3:
                raise error.Abort(
                    _(
                        b'invalid httprequest: expected format is '
                        b'"httprequest <method> <path>'
                    )
                )

            method, httppath = request[1:]
            headers = {}
            body = None
            frames = []
            for line in lines:
                line = line.lstrip()
                m = re.match(b'^([a-zA-Z0-9_-]+): (.*)$', line)
                if m:
                    # Headers need to use native strings.
                    key = pycompat.strurl(m.group(1))
                    value = pycompat.strurl(m.group(2))
                    headers[key] = value
                    continue

                if line.startswith(b'BODYFILE '):
                    with open(line.split(b' ', 1), b'rb') as fh:
                        body = fh.read()
                elif line.startswith(b'frame '):
                    frame = wireprotoframing.makeframefromhumanstring(
                        line[len(b'frame ') :]
                    )

                    frames.append(frame)
                else:
                    raise error.Abort(
                        _(b'unknown argument to httprequest: %s') % line
                    )

            url = path + httppath

            if frames:
                body = b''.join(bytes(f) for f in frames)

            req = urlmod.urlreq.request(pycompat.strurl(url), body, headers)

            # urllib.Request insists on using has_data() as a proxy for
            # determining the request method. Override that to use our
            # explicitly requested method.
            req.get_method = lambda: pycompat.sysstr(method)

            try:
                res = opener.open(req)
                body = res.read()
            except util.urlerr.urlerror as e:
                # read() method must be called, but only exists in Python 2
                getattr(e, 'read', lambda: None)()
                continue

            ct = res.headers.get('Content-Type')
            if ct == 'application/mercurial-cbor':
                ui.write(
                    _(b'cbor> %s\n')
                    % stringutil.pprint(
                        cborutil.decodeall(body), bprefix=True, indent=2
                    )
                )

        elif action == b'close':
            assert peer is not None
            peer.close()
        elif action == b'readavailable':
            if not stdout or not stderr:
                raise error.Abort(
                    _(b'readavailable not available on this peer')
                )

            stdin.close()
            stdout.read()
            stderr.read()

        elif action == b'readline':
            if not stdout:
                raise error.Abort(_(b'readline not available on this peer'))
            stdout.readline()
        elif action == b'ereadline':
            if not stderr:
                raise error.Abort(_(b'ereadline not available on this peer'))
            stderr.readline()
        elif action.startswith(b'read '):
            count = int(action.split(b' ', 1)[1])
            if not stdout:
                raise error.Abort(_(b'read not available on this peer'))
            stdout.read(count)
        elif action.startswith(b'eread '):
            count = int(action.split(b' ', 1)[1])
            if not stderr:
                raise error.Abort(_(b'eread not available on this peer'))
            stderr.read(count)
        else:
            raise error.Abort(_(b'unknown action: %s') % action)

    if batchedcommands is not None:
        raise error.Abort(_(b'unclosed "batchbegin" request'))

    if peer:
        peer.close()

    if proc:
        proc.kill()