annotate mercurial/unionrepo.py @ 27934:1779ff7426c9 stable

hgweb: update canvas.width before dynamically redrawing graph (issue2683)

After 91ac8cb79125 graph canvas width is decided once on the initial rendering.
However, after graph page gets scrolled down to load more, it might need more
horizontal space to draw, so it needs to resize the canvas dynamically.

The exact problem that this patch solves can be seen using:

    hg init testfork
    cd testfork
    echo 0 > foo
    hg ci -Am0
    echo 1 > foo
    hg ci -m1
    hg up 0
    echo 2 > foo
    hg ci -m2
    hg gl -T '{rev}\n'

    @  2
    |
    | o  1
    |/
    o  0

    hg serve

And then by navigating to http://127.0.0.1:8000/graph/tip?revcount=1

"revcount=1" makes sure the initial graph contains only revision 2. And because
the initial canvas width takes only that one revision into count, after the
(immediate) AJAX update revision 1 will be cut off from the graph.

We can safely set canvas width to the new value we get from the AJAX request
because every time graph is updated, it is completely redrawn using all the
requested nodes (in the case above it will use /graph/2?revcount=61), so the
value is guaranteed not to decrease.

P.S.: Sorry for parsing HTML with regexes, but I didn't start it.

# unionrepo.py - repository class for viewing union of repository changesets
#
# Derived from bundlerepo.py
# Copyright 2006, 2007 Benoit Boissinot <[e-mail]>
# Copyright 2013 Unity Technologies, Mads Kiilerich <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

"""Repository class for "in-memory pull" of one local repository to another,
allowing operations like diff and log with revsets.
"""

from __future__ import absolute_import

import os

from .i18n import _
from .node import nullid

from . import (
    changelog,
    cmdutil,
    error,
    filelog,
    localrepo,
    manifest,
    mdiff,
    pathutil,
    revlog,
    scmutil,
    util,
)

class unionrevlog(revlog.revlog):
    def __init__(self, opener, indexfile, revlog2, linkmapper):
        # How it works:
        # To retrieve a revision, we just need to know the node id so we can
        # look it up in revlog2.
        #
        # To differentiate a rev in the second revlog from a rev in the revlog,
        # we check revision against repotiprev.
        opener = scmutil.readonlyvfs(opener)
        revlog.revlog.__init__(self, opener, indexfile)
        self.revlog2 = revlog2

        n = len(self)
        self.repotiprev = n - 1
        self.bundlerevs = set() # used by 'bundle()' revset expression
        for rev2 in self.revlog2:
            rev = self.revlog2.index[rev2]
            # rev numbers - in revlog2, very different from self.rev
            _start, _csize, _rsize, base, linkrev, p1rev, p2rev, node = rev
            flags = _start & 0xFFFF

            if linkmapper is None: # link is to same revlog
                assert linkrev == rev2 # we never link back
                link = n
            else: # rev must be mapped from repo2 cl to unified cl by linkmapper
                link = linkmapper(linkrev)

            if linkmapper is not None: # link is to same revlog
                base = linkmapper(base)

            if node in self.nodemap:
                # this happens for the common revlog revisions
                self.bundlerevs.add(self.nodemap[node])
                continue

            p1node = self.revlog2.node(p1rev)
            p2node = self.revlog2.node(p2rev)

            e = (flags, None, None, base,
                 link, self.rev(p1node), self.rev(p2node), node)
            self.index.insert(-1, e)
            self.nodemap[node] = n
            self.bundlerevs.add(n)
            n += 1

    def _chunk(self, rev):
        if rev <= self.repotiprev:
            return revlog.revlog._chunk(self, rev)
        return self.revlog2._chunk(self.node(rev))

    def revdiff(self, rev1, rev2):
        """return or calculate a delta between two revisions"""
        if rev1 > self.repotiprev and rev2 > self.repotiprev:
            return self.revlog2.revdiff(
                self.revlog2.rev(self.node(rev1)),
                self.revlog2.rev(self.node(rev2)))
        elif rev1 <= self.repotiprev and rev2 <= self.repotiprev:
            return self.baserevdiff(rev1, rev2)

        return mdiff.textdiff(self.revision(self.node(rev1)),
                              self.revision(self.node(rev2)))

    def revision(self, nodeorrev):
        """return an uncompressed revision of a given node or revision
        number.
        """
        if isinstance(nodeorrev, int):
            rev = nodeorrev
            node = self.node(rev)
        else:
            node = nodeorrev
            rev = self.rev(node)

        if node == nullid:
            return ""

        if rev > self.repotiprev:
            text = self.revlog2.revision(node)
            self._cache = (node, rev, text)
        else:
            text = self.baserevision(rev)
            # already cached
        return text

    def baserevision(self, nodeorrev):
        # Revlog subclasses may override 'revision' method to modify format of
        # content retrieved from revlog. To use unionrevlog with such class one
        # needs to override 'baserevision' and make more specific call here.
        return revlog.revlog.revision(self, nodeorrev)

    def baserevdiff(self, rev1, rev2):
        # Exists for the same purpose as baserevision.
        return revlog.revlog.revdiff(self, rev1, rev2)

    def addrevision(self, text, transaction, link, p1=None, p2=None, d=None):
        raise NotImplementedError
    def addgroup(self, revs, linkmapper, transaction):
        raise NotImplementedError
    def strip(self, rev, minlink):
        raise NotImplementedError
    def checksize(self):
        raise NotImplementedError

class unionchangelog(unionrevlog, changelog.changelog):
    def __init__(self, opener, opener2):
        changelog.changelog.__init__(self, opener)
        linkmapper = None
        changelog2 = changelog.changelog(opener2)
        unionrevlog.__init__(self, opener, self.indexfile, changelog2,
                             linkmapper)

    def baserevision(self, nodeorrev):
        # Although changelog doesn't override 'revision' method, some extensions
        # may replace this class with another that does. Same story with
        # manifest and filelog classes.
        return changelog.changelog.revision(self, nodeorrev)

    def baserevdiff(self, rev1, rev2):
        return changelog.changelog.revdiff(self, rev1, rev2)

class unionmanifest(unionrevlog, manifest.manifest):
    def __init__(self, opener, opener2, linkmapper):
        manifest.manifest.__init__(self, opener)
        manifest2 = manifest.manifest(opener2)
        unionrevlog.__init__(self, opener, self.indexfile, manifest2,
                             linkmapper)

    def baserevision(self, nodeorrev):
        return manifest.manifest.revision(self, nodeorrev)

    def baserevdiff(self, rev1, rev2):
        return manifest.manifest.revdiff(self, rev1, rev2)

class unionfilelog(unionrevlog, filelog.filelog):
    def __init__(self, opener, path, opener2, linkmapper, repo):
        filelog.filelog.__init__(self, opener, path)
        filelog2 = filelog.filelog(opener2, path)
        unionrevlog.__init__(self, opener, self.indexfile, filelog2,
                             linkmapper)
        self._repo = repo

    def baserevision(self, nodeorrev):
        return filelog.filelog.revision(self, nodeorrev)

    def baserevdiff(self, rev1, rev2):
        return filelog.filelog.revdiff(self, rev1, rev2)

    def iscensored(self, rev):
        """Check if a revision is censored."""
        if rev <= self.repotiprev:
            return filelog.filelog.iscensored(self, rev)
        node = self.node(rev)
        return self.revlog2.iscensored(self.revlog2.rev(node))

class unionpeer(localrepo.localpeer):
    def canpush(self):
        return False

class unionrepository(localrepo.localrepository):
    def __init__(self, ui, path, path2):
        localrepo.localrepository.__init__(self, ui, path)
        self.ui.setconfig('phases', 'publish', False, 'unionrepo')

        self._url = 'union:%s+%s' % (util.expandpath(path),
                                     util.expandpath(path2))
        self.repo2 = localrepo.localrepository(ui, path2)

    @localrepo.unfilteredpropertycache
    def changelog(self):
        return unionchangelog(self.svfs, self.repo2.svfs)

    def _clrev(self, rev2):
        """map from repo2 changelog rev to temporary rev in self.changelog"""
        node = self.repo2.changelog.node(rev2)
        return self.changelog.rev(node)

    @localrepo.unfilteredpropertycache
    def manifest(self):
        return unionmanifest(self.svfs, self.repo2.svfs,
                             self._clrev)

    def url(self):
        return self._url

    def file(self, f):
        return unionfilelog(self.svfs, f, self.repo2.svfs,
                            self._clrev, self)

    def close(self):
        self.repo2.close()

    def cancopy(self):
        return False

    def peer(self):
        return unionpeer(self)

    def getcwd(self):
        return os.getcwd() # always outside the repo

def instance(ui, path, create):
    if create:
        raise error.Abort(_('cannot create new union repository'))
    parentpath = ui.config("bundle", "mainreporoot", "")
    if not parentpath:
        # try to find the correct path to the working directory repo
        parentpath = cmdutil.findrepo(os.getcwd())
        if parentpath is None:
            parentpath = ''
    if parentpath:
        # Try to make the full path relative so we get a nice, short URL.
        # In particular, we don't want temp dir names in test outputs.
        cwd = os.getcwd()
        if parentpath == cwd:
            parentpath = ''
        else:
            cwd = pathutil.normasprefix(cwd)
            if parentpath.startswith(cwd):
                parentpath = parentpath[len(cwd):]
    if path.startswith('union:'):
        s = path.split(":", 1)[1].split("+", 1)
        if len(s) == 1:
            repopath, repopath2 = parentpath, s[0]
        else:
            repopath, repopath2 = s
    else:
        repopath, repopath2 = parentpath, path
    return unionrepository(ui, repopath, repopath2)