annotate tests/test-archive.t @ 32697:19b9fc40cc51

revlog: skeleton support for version 2 revlogs

There are a number of improvements we want to make to revlogs
that will require a new version - version 2. It is unclear what the
full set of improvements will be or when we'll be done with them.
What I do know is that the process will likely take longer than a
single release, will require input from various stakeholders to
evaluate changes, and will have many contentious debates and
bikeshedding.

It is unrealistic to develop revlog version 2 up front: there
are just too many uncertainties that we won't know until things
are implemented and experiments are run. Some changes will also
be invasive and prone to bit rot, so sitting on dozens of patches
is not practical.

This commit introduces skeleton support for version 2 revlogs in
a way that is flexible and not bound by backwards compatibility
concerns.

An experimental repo requirement for denoting revlog v2 has been
added. The requirement string has a sub-version component to it.
This will allow us to declare multiple requirements in the course
of developing revlog v2. Whenever we change the in-development
revlog v2 format, we can tweak the string, creating a new
requirement and locking out old clients. This will allow us to
make as many backwards incompatible changes and experiments to
revlog v2 as we want. In other words, we can land code and make
meaningful progress towards revlog v2 while still maintaining
extreme format flexibility up until the point we freeze the
format and remove the experimental labels.

To enable the new repo requirement, you must supply an experimental
and undocumented config option. But not just any boolean flag
will do: you need to explicitly use a value that no sane person
should ever type. This is an additional guard against enabling
revlog v2 on an installation it shouldn't be enabled on. The
specific scenario I'm trying to prevent is say a user with a
4.4 client with a frozen format enabling the option but then
downgrading to 4.3 and accidentally creating repos with an
outdated and unsupported repo format. Requiring a "challenge"
string should prevent this.

Because the format is not yet finalized and I don't want to take
any chances, revlog v2's version is currently 0xDEAD. I figure
squatting on a value we're likely never to use as an actual revlog
version to mean "internal testing only" is acceptable. And
"dead" is easily recognized as something meaningful.

There is a bunch of cleanup that is needed before work on revlog
v2 begins in earnest. I plan on doing that work once this patch
is accepted and we're comfortable with the idea of starting down
this path.

#require serve

  $ hg init test
  $ cd test
  $ echo foo>foo
  $ hg commit -Am 1 -d '1 0'
  adding foo
  $ echo bar>bar
  $ hg commit -Am 2 -d '2 0'
  adding bar
  $ mkdir baz
  $ echo bletch>baz/bletch
  $ hg commit -Am 3 -d '1000000000 0'
  adding baz/bletch
  $ hg init subrepo
  $ touch subrepo/sub
  $ hg -q -R subrepo ci -Am "init subrepo"
  $ echo "subrepo = subrepo" > .hgsub
  $ hg add .hgsub
  $ hg ci -m "add subrepo"
  $ echo "[web]" >> .hg/hgrc
  $ echo "name = test-archive" >> .hg/hgrc
  $ echo "archivesubrepos = True" >> .hg/hgrc
  $ cp .hg/hgrc .hg/hgrc-base
  > test_archtype() {
  >     echo "allow_archive = $1" >> .hg/hgrc
  >     hg serve -p $HGPORT -d --pid-file=hg.pid -E errors.log
  >     cat hg.pid >> $DAEMON_PIDS
  >     echo % $1 allowed should give 200
  >     get-with-headers.py localhost:$HGPORT "archive/tip.$2" | head -n 1
  >     echo % $3 and $4 disallowed should both give 403
  >     get-with-headers.py localhost:$HGPORT "archive/tip.$3" | head -n 1
  >     get-with-headers.py localhost:$HGPORT "archive/tip.$4" | head -n 1
  >     killdaemons.py
  >     cat errors.log
  >     cp .hg/hgrc-base .hg/hgrc
  > }

check http return codes

  $ test_archtype gz tar.gz tar.bz2 zip
  % gz allowed should give 200
  200 Script output follows
  % tar.bz2 and zip disallowed should both give 403
  403 Archive type not allowed: bz2
  403 Archive type not allowed: zip
  $ test_archtype bz2 tar.bz2 zip tar.gz
  % bz2 allowed should give 200
  200 Script output follows
  % zip and tar.gz disallowed should both give 403
  403 Archive type not allowed: zip
  403 Archive type not allowed: gz
  $ test_archtype zip zip tar.gz tar.bz2
  % zip allowed should give 200
  200 Script output follows
  % tar.gz and tar.bz2 disallowed should both give 403
  403 Archive type not allowed: gz
  403 Archive type not allowed: bz2

  $ echo "allow_archive = gz bz2 zip" >> .hg/hgrc
  $ hg serve -p $HGPORT -d --pid-file=hg.pid -E errors.log
  $ cat hg.pid >> $DAEMON_PIDS

check archive links' order

  $ get-with-headers.py localhost:$HGPORT "?revcount=1" | grep '/archive/tip.'
  <a href="/archive/tip.zip">zip</a>
  <a href="/archive/tip.tar.gz">gz</a>
  <a href="/archive/tip.tar.bz2">bz2</a>

invalid arch type should give 404

  $ get-with-headers.py localhost:$HGPORT "archive/tip.invalid" | head -n 1
  404 Unsupported archive type: None

  $ TIP=`hg id -v | cut -f1 -d' '`
  $ QTIP=`hg id -q`
  $ cat > getarchive.py <<EOF
  > from __future__ import absolute_import
  > import os
  > import sys
  > from mercurial import (
  >     util,
  > )
  > try:
  >     # Set stdout to binary mode for win32 platforms
  >     import msvcrt
  >     msvcrt.setmode(sys.stdout.fileno(), os.O_BINARY)
  > except ImportError:
  >     pass
  > if len(sys.argv) <= 3:
  >     node, archive = sys.argv[1:]
  >     requeststr = 'cmd=archive;node=%s;type=%s' % (node, archive)
  > else:
  >     node, archive, file = sys.argv[1:]
  >     requeststr = 'cmd=archive;node=%s;type=%s;file=%s' % (node, archive, file)
  > try:
  >     stdout = sys.stdout.buffer
  > except AttributeError:
  >     stdout = sys.stdout
  > try:
  >     f = util.urlreq.urlopen('http://$LOCALIP:%s/?%s'
  >                     % (os.environ['HGPORT'], requeststr))
  >     stdout.write(f.read())
  > except util.urlerr.httperror as e:
  >     sys.stderr.write(str(e) + '\n')
  > EOF
  $ python getarchive.py "$TIP" gz | gunzip | tar tf - 2>/dev/null
  test-archive-1701ef1f1510/.hg_archival.txt
  test-archive-1701ef1f1510/.hgsub
  test-archive-1701ef1f1510/.hgsubstate
  test-archive-1701ef1f1510/bar
  test-archive-1701ef1f1510/baz/bletch
  test-archive-1701ef1f1510/foo
  test-archive-1701ef1f1510/subrepo/sub
  $ python getarchive.py "$TIP" bz2 | bunzip2 | tar tf - 2>/dev/null
  test-archive-1701ef1f1510/.hg_archival.txt
  test-archive-1701ef1f1510/.hgsub
  test-archive-1701ef1f1510/.hgsubstate
  test-archive-1701ef1f1510/bar
  test-archive-1701ef1f1510/baz/bletch
  test-archive-1701ef1f1510/foo
  test-archive-1701ef1f1510/subrepo/sub
  $ python getarchive.py "$TIP" zip > archive.zip
  $ unzip -t archive.zip
  Archive:  archive.zip
      testing: test-archive-1701ef1f1510/.hg_archival.txt*OK (glob)
      testing: test-archive-1701ef1f1510/.hgsub*OK (glob)
      testing: test-archive-1701ef1f1510/.hgsubstate*OK (glob)
      testing: test-archive-1701ef1f1510/bar*OK (glob)
      testing: test-archive-1701ef1f1510/baz/bletch*OK (glob)
      testing: test-archive-1701ef1f1510/foo*OK (glob)
      testing: test-archive-1701ef1f1510/subrepo/sub*OK (glob)
  No errors detected in compressed data of archive.zip.

test that we can download single directories and files

  $ python getarchive.py "$TIP" gz baz | gunzip | tar tf - 2>/dev/null
  test-archive-1701ef1f1510/baz/bletch
  $ python getarchive.py "$TIP" gz foo | gunzip | tar tf - 2>/dev/null
  test-archive-1701ef1f1510/foo

test that we detect file patterns that match no files

  $ python getarchive.py "$TIP" gz foobar
  HTTP Error 404: file(s) not found: foobar

test that we reject unsafe patterns

  $ python getarchive.py "$TIP" gz relre:baz
  HTTP Error 404: file(s) not found: relre:baz

  $ killdaemons.py

  $ hg archive -t tar test.tar
  $ tar tf test.tar
  test/.hg_archival.txt
  test/.hgsub
  test/.hgsubstate
  test/bar
  test/baz/bletch
  test/foo

  $ hg archive --debug -t tbz2 -X baz test.tar.bz2 --config progress.debug=true
  archiving: 0/4 files (0.00%)
  archiving: .hgsub 1/4 files (25.00%)
  archiving: .hgsubstate 2/4 files (50.00%)
  archiving: bar 3/4 files (75.00%)
  archiving: foo 4/4 files (100.00%)
  $ bunzip2 -dc test.tar.bz2 | tar tf - 2>/dev/null
  test/.hg_archival.txt
  test/.hgsub
  test/.hgsubstate
  test/bar
  test/foo

  $ hg archive -t tgz -p %b-%h test-%h.tar.gz
  $ gzip -dc test-$QTIP.tar.gz | tar tf - 2>/dev/null
  test-1701ef1f1510/.hg_archival.txt
  test-1701ef1f1510/.hgsub
  test-1701ef1f1510/.hgsubstate
  test-1701ef1f1510/bar
  test-1701ef1f1510/baz/bletch
  test-1701ef1f1510/foo

  $ hg archive autodetected_test.tar
  $ tar tf autodetected_test.tar
  autodetected_test/.hg_archival.txt
  autodetected_test/.hgsub
  autodetected_test/.hgsubstate
  autodetected_test/bar
  autodetected_test/baz/bletch
  autodetected_test/foo

The '-t' should override autodetection

  $ hg archive -t tar autodetect_override_test.zip
  $ tar tf autodetect_override_test.zip
  autodetect_override_test.zip/.hg_archival.txt
  autodetect_override_test.zip/.hgsub
  autodetect_override_test.zip/.hgsubstate
  autodetect_override_test.zip/bar
  autodetect_override_test.zip/baz/bletch
  autodetect_override_test.zip/foo

  $ for ext in tar tar.gz tgz tar.bz2 tbz2 zip; do
  >     hg archive auto_test.$ext
  >     if [ -d auto_test.$ext ]; then
  >         echo "extension $ext was not autodetected."
  >     fi
  > done

  $ cat > md5comp.py <<EOF
  > from __future__ import print_function
  > try:
  >     from hashlib import md5
  > except ImportError:
  >     from md5 import md5
  > import sys
  > f1, f2 = sys.argv[1:3]
  > h1 = md5(open(f1, 'rb').read()).hexdigest()
  > h2 = md5(open(f2, 'rb').read()).hexdigest()
  > print(h1 == h2 or "md5 differ: " + repr((h1, h2)))
  > EOF

archive name is stored in the archive, so create similar archives and
rename them afterwards.

  $ hg archive -t tgz tip.tar.gz
  $ mv tip.tar.gz tip1.tar.gz
  $ sleep 1
  $ hg archive -t tgz tip.tar.gz
  $ mv tip.tar.gz tip2.tar.gz
  $ python md5comp.py tip1.tar.gz tip2.tar.gz
  True

  $ hg archive -t zip -p /illegal test.zip
  abort: archive prefix contains illegal components
  [255]
  $ hg archive -t zip -p very/../bad test.zip

  $ hg archive --config ui.archivemeta=false -t zip -r 2 test.zip
  $ unzip -t test.zip
  Archive:  test.zip
      testing: test/bar*OK (glob)
      testing: test/baz/bletch*OK (glob)
      testing: test/foo*OK (glob)
  No errors detected in compressed data of test.zip.

  $ hg archive -t tar - | tar tf - 2>/dev/null
  test-1701ef1f1510/.hg_archival.txt
  test-1701ef1f1510/.hgsub
  test-1701ef1f1510/.hgsubstate
  test-1701ef1f1510/bar
  test-1701ef1f1510/baz/bletch
  test-1701ef1f1510/foo

  $ hg archive -r 0 -t tar rev-%r.tar
  $ [ -f rev-0.tar ]

test .hg_archival.txt

  $ hg archive ../test-tags
  $ cat ../test-tags/.hg_archival.txt
  repo: daa7f7c60e0a224faa4ff77ca41b2760562af264
  node: 1701ef1f151069b8747038e93b5186bb43a47504
  branch: default
  latesttag: null
  latesttagdistance: 4
  changessincelatesttag: 4
  $ hg tag -r 2 mytag
  $ hg tag -r 2 anothertag
  $ hg archive -r 2 ../test-lasttag
  $ cat ../test-lasttag/.hg_archival.txt
  repo: daa7f7c60e0a224faa4ff77ca41b2760562af264
  node: 2c0277f05ed49d1c8328fb9ba92fba7a5ebcb33e
  branch: default
  tag: anothertag
  tag: mytag

  $ hg archive -t bogus test.bogus
  abort: unknown archive type 'bogus'
  [255]

enable progress extension:

  $ cp $HGRCPATH $HGRCPATH.no-progress
  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > assume-tty = 1
  > format = topic bar number
  > delay = 0
  > refresh = 0
  > width = 60
  > EOF

  $ hg archive ../with-progress
  \r (no-eol) (esc)
  archiving [                                           ] 0/6\r (no-eol) (esc)
  archiving [======>                                    ] 1/6\r (no-eol) (esc)
  archiving [=============>                             ] 2/6\r (no-eol) (esc)
  archiving [====================>                      ] 3/6\r (no-eol) (esc)
  archiving [===========================>               ] 4/6\r (no-eol) (esc)
  archiving [==================================>        ] 5/6\r (no-eol) (esc)
  archiving [==========================================>] 6/6\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

cleanup after progress extension test:

  $ cp $HGRCPATH.no-progress $HGRCPATH

server errors

  $ cat errors.log

empty repo

  $ hg init ../empty
  $ cd ../empty
  $ hg archive ../test-empty
  abort: no working directory: please specify a revision
  [255]

old file -- date clamped to 1980

  $ touch -t 197501010000 old
  $ hg add old
  $ hg commit -m old
  $ hg archive ../old.zip
  $ unzip -l ../old.zip | grep -v -- ----- | egrep -v files$
  Archive:  ../old.zip
  \s*Length.* (re)
  *172*80*00:00*old/.hg_archival.txt (glob)
  *0*80*00:00*old/old (glob)

show an error when a provided pattern matches no files

  $ hg archive -I file_that_does_not_exist.foo ../empty.zip
  abort: no files match the archive pattern
  [255]

  $ hg archive -X * ../empty.zip
  abort: no files match the archive pattern
  [255]

  $ cd ..

issue3600: check whether "hg archive" can create archive files which
are extracted with expected timestamp, even though TZ is not
configured as GMT.

  $ mkdir issue3600
  $ cd issue3600

  $ hg init repo
  $ echo a > repo/a
  $ hg -R repo add repo/a
  $ hg -R repo commit -m '#0' -d '456789012 21600'
  $ cat > show_mtime.py <<EOF
  > from __future__ import print_function
  > import sys, os
  > print(int(os.stat(sys.argv[1]).st_mtime))
  > EOF

  $ hg -R repo archive --prefix tar-extracted archive.tar
  $ (TZ=UTC-3; export TZ; tar xf archive.tar)
  $ python show_mtime.py tar-extracted/a
  456789012

  $ hg -R repo archive --prefix zip-extracted archive.zip
  $ (TZ=UTC-3; export TZ; unzip -q archive.zip)
  $ python show_mtime.py zip-extracted/a
  456789012

  $ cd ..