annotate tests/test-basic.t @ 42619:20d0e59be79b

tests: show the files fields of changelogs for many merges

I don't think there's coverage for many of the subtle cases, and I
found it hard to understand what the code is doing by reading it.  The
test takes 40s to run on a laptop, or 9s with --chg.

I have yet to find a description of what the files field is supposed
to be for merges. I thought it could be one of:
1. the files added/modified/removed relative to p1 (wouldn't seem
  useful, but `hg diff -c -r mergerev` has this behavior)
2. the files with filelog nodes not in either parent (i.e., what is
needed to create a bundle out of a commit)
3. the files added/removed/modified files by merge itself [1]

It's clearly not 1, because file contents merges are symmetric. It's
clearly not 2 because removed files and exec bit changes are
listed. It's also not 3 but I think it's intended to be 3 and the
differences are bugs.

Assuming 3, the test shows that, for merges, the list of files both
overapproximates and underapproximates. All the cases involve file
changes not in the filelog but in the manifest (existence of file
at revision, exec bit and file vs symlink).

I didn't look at all underapproximations, but they looked minor. The
two overapproximations are problematic though because they both cause
potentially long lists of files when merging cleanly.


[1] even what it means for the merge commit itself to change a file is
not completely trivial. A file in the merge being the same as in one
of the parent is too lax as it would consider that merges change
nothing when they revert all the changes done on one side. The
criteria used in the test and in the next commit for "merge didn't
touch a file" is:
- the parents and the merge all have the same file
- or, one parent didn't touch the file and the other parent contains
  the same file as the merge

Differential Revision: https://phab.mercurial-scm.org/D6612

Create a repository:

#if no-extraextensions
  $ hg config
  devel.all-warnings=true
  devel.default-date=0 0
  extensions.fsmonitor= (fsmonitor !)
  largefiles.usercache=$TESTTMP/.cache/largefiles
  lfs.usercache=$TESTTMP/.cache/lfs
  ui.slash=True
  ui.interactive=False
  ui.merge=internal:merge
  ui.mergemarkers=detailed
  ui.promptecho=True
  web.address=localhost
  web\.ipv6=(?:True|False) (re)
  web.server-header=testing stub value
#endif

  $ hg init t
  $ cd t

Prepare a changeset:

  $ echo a > a
  $ hg add a

  $ hg status
  A a

Writes to stdio succeed and fail appropriately

#if devfull
  $ hg status 2>/dev/full
  A a

  $ hg status >/dev/full
  abort: No space left on device
  [255]
#endif

#if devfull
  $ hg status >/dev/full 2>&1
  [255]

  $ hg status ENOENT 2>/dev/full
  [255]
#endif

  $ hg commit -m test

This command is ancient:

  $ hg history
  changeset:   0:acb14030fe0a
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     test
  

Verify that updating to revision 0 via commands.update() works properly

  $ cat <<EOF > update_to_rev0.py
  > from mercurial import commands, hg, ui as uimod
  > myui = uimod.ui.load()
  > repo = hg.repository(myui, path=b'.')
  > commands.update(myui, repo, rev=b"0")
  > EOF
  $ hg up null
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ "$PYTHON" ./update_to_rev0.py
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg identify -n
  0


Poke around at hashes:

  $ hg manifest --debug
  b789fdd96dc2f3bd229c1dd8eedf0fc60e2b68e3 644   a

  $ hg cat a
  a

Verify should succeed:

  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 1 changesets with 1 changes to 1 files

Repository root:

  $ hg root
  $TESTTMP/t
  $ hg log -l1 -T '{reporoot}\n'
  $TESTTMP/t
  $ hg root -Tjson | sed 's|\\\\|\\|g'
  [
   {
    "hgpath": "$TESTTMP/t/.hg",
    "reporoot": "$TESTTMP/t",
    "storepath": "$TESTTMP/t/.hg/store"
   }
  ]

At the end...

  $ cd ..

Status message redirection:

  $ hg init empty

 status messages are sent to stdout by default:

  $ hg outgoing -R t empty -Tjson 2>/dev/null
  comparing with empty
  searching for changes
  [
   {
    "bookmarks": [],
    "branch": "default",
    "date": [0, 0],
    "desc": "test",
    "node": "acb14030fe0a21b60322c440ad2d20cf7685a376",
    "parents": ["0000000000000000000000000000000000000000"],
    "phase": "draft",
    "rev": 0,
    "tags": ["tip"],
    "user": "test"
   }
  ]

 which can be configured to send to stderr, so the output wouldn't be
 interleaved:

  $ cat <<'EOF' >> "$HGRCPATH"
  > [ui]
  > message-output = stderr
  > EOF
  $ hg outgoing -R t empty -Tjson 2>/dev/null
  [
   {
    "bookmarks": [],
    "branch": "default",
    "date": [0, 0],
    "desc": "test",
    "node": "acb14030fe0a21b60322c440ad2d20cf7685a376",
    "parents": ["0000000000000000000000000000000000000000"],
    "phase": "draft",
    "rev": 0,
    "tags": ["tip"],
    "user": "test"
   }
  ]
  $ hg outgoing -R t empty -Tjson >/dev/null
  comparing with empty
  searching for changes

 this option should be turned off by HGPLAIN= since it may break scripting use:

  $ HGPLAIN= hg outgoing -R t empty -Tjson 2>/dev/null
  comparing with empty
  searching for changes
  [
   {
    "bookmarks": [],
    "branch": "default",
    "date": [0, 0],
    "desc": "test",
    "node": "acb14030fe0a21b60322c440ad2d20cf7685a376",
    "parents": ["0000000000000000000000000000000000000000"],
    "phase": "draft",
    "rev": 0,
    "tags": ["tip"],
    "user": "test"
   }
  ]

 but still overridden by --config:

  $ HGPLAIN= hg outgoing -R t empty -Tjson --config ui.message-output=stderr \
  > 2>/dev/null
  [
   {
    "bookmarks": [],
    "branch": "default",
    "date": [0, 0],
    "desc": "test",
    "node": "acb14030fe0a21b60322c440ad2d20cf7685a376",
    "parents": ["0000000000000000000000000000000000000000"],
    "phase": "draft",
    "rev": 0,
    "tags": ["tip"],
    "user": "test"
   }
  ]

Invalid ui.message-output option:

  $ hg log -R t --config ui.message-output=bad
  abort: invalid ui.message-output destination: bad
  [255]

Underlying message streams should be updated when ui.fout/ferr are set:

  $ cat <<'EOF' > capui.py
  > from mercurial import pycompat, registrar
  > cmdtable = {}
  > command = registrar.command(cmdtable)
  > @command(b'capui', norepo=True)
  > def capui(ui):
  >     out = ui.fout
  >     ui.fout = pycompat.bytesio()
  >     ui.status(b'status\n')
  >     ui.ferr = pycompat.bytesio()
  >     ui.warn(b'warn\n')
  >     out.write(b'stdout: %s' % ui.fout.getvalue())
  >     out.write(b'stderr: %s' % ui.ferr.getvalue())
  > EOF
  $ hg --config extensions.capui=capui.py --config ui.message-output=stdio capui
  stdout: status
  stderr: warn