annotate mercurial/revlogutils/randomaccessfile.py @ 51684:20e2a20674dc

convert: drop a duplicate implementation of `dateutil.makedate()`

I noticed this because the signature generated by pytype recently changed to be
less specific.  When the method was introduced back in 337d728e644f,
`util.makedate()` didn't take an optional timestamp arg.  But now it does, and
the methods are the same (except the `dateutil` version validates that the
timestamp isn't a negative value).  I left the old method in place in case
anyone has custom convert code that monkey patches it.

# Copyright Mercurial Contributors
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

import contextlib

from ..i18n import _
from .. import (
    error,
    util,
)


_MAX_CACHED_CHUNK_SIZE = 1048576  # 1 MiB

PARTIAL_READ_MSG = _(
    b'partial read of revlog %s; expected %d bytes from offset %d, got %d'
)


def _is_power_of_two(n):
    return (n & (n - 1) == 0) and n != 0


class appender:
    """the changelog index must be updated last on disk, so we use this class
    to delay writes to it"""

    def __init__(self, vfs, name, mode, buf):
        self.data = buf
        fp = vfs(name, mode)
        self.fp = fp
        self.offset = fp.tell()
        self.size = vfs.fstat(fp).st_size
        self._end = self.size

    def end(self):
        return self._end

    def tell(self):
        return self.offset

    def flush(self):
        pass

    @property
    def closed(self):
        return self.fp.closed

    def close(self):
        self.fp.close()

    def seek(self, offset, whence=0):
        '''virtual file offset spans real file and data'''
        if whence == 0:
            self.offset = offset
        elif whence == 1:
            self.offset += offset
        elif whence == 2:
            self.offset = self.end() + offset
        if self.offset < self.size:
            self.fp.seek(self.offset)

    def read(self, count=-1):
        '''only trick here is reads that span real file and data'''
        ret = b""
        if self.offset < self.size:
            s = self.fp.read(count)
            ret = s
            self.offset += len(s)
            if count > 0:
                count -= len(s)
        if count != 0:
            doff = self.offset - self.size
            self.data.insert(0, b"".join(self.data))
            del self.data[1:]
            s = self.data[0][doff : doff + count]
            self.offset += len(s)
            ret += s
        return ret

    def write(self, s):
        self.data.append(bytes(s))
        self.offset += len(s)
        self._end += len(s)

    def __enter__(self):
        self.fp.__enter__()
        return self

    def __exit__(self, *args):
        return self.fp.__exit__(*args)


class randomaccessfile:
    """Accessing arbitrary chuncks of data within a file, with some caching"""

    def __init__(
        self,
        opener,
        filename,
        default_cached_chunk_size,
        initial_cache=None,
    ):
        # Required by bitwise manipulation below
        assert _is_power_of_two(default_cached_chunk_size)

        self.opener = opener
        self.filename = filename
        self.default_cached_chunk_size = default_cached_chunk_size
        self.writing_handle = None  # This is set from revlog.py
        self.reading_handle = None
        self._cached_chunk = b''
        self._cached_chunk_position = 0  # Offset from the start of the file
        if initial_cache:
            self._cached_chunk_position, self._cached_chunk = initial_cache

    def clear_cache(self):
        self._cached_chunk = b''
        self._cached_chunk_position = 0

    @property
    def is_open(self):
        """True if any file handle is being held

        Used for assert and debug in the python code"""
        return (
            self.reading_handle is not None or self.writing_handle is not None
        )

    def _open(self, mode=b'r'):
        """Return a file object"""
        return self.opener(self.filename, mode=mode)

    @contextlib.contextmanager
    def _read_handle(self):
        """File object suitable for reading data"""
        # Use a file handle being actively used for writes, if available.
        # There is some danger to doing this because reads will seek the
        # file. However, revlog._writeentry performs a SEEK_END before all
        # writes, so we should be safe.
        if self.writing_handle:
            yield self.writing_handle

        elif self.reading_handle:
            yield self.reading_handle

        # Otherwise open a new file handle.
        else:
            with self._open() as fp:
                yield fp

    @contextlib.contextmanager
    def reading(self):
        """Context manager that keeps the file open for reading"""
        if (
            self.reading_handle is None
            and self.writing_handle is None
            and self.filename is not None
        ):
            with self._open() as fp:
                self.reading_handle = fp
                try:
                    yield
                finally:
                    self.reading_handle = None
        else:
            yield

    def read_chunk(self, offset, length):
        """Read a chunk of bytes from the file.

        Accepts an absolute offset, length to read, and an optional existing
        file handle to read from.

        If an existing file handle is passed, it will be seeked and the
        original seek position will NOT be restored.

        Returns a str or buffer of raw byte data.

        Raises if the requested number of bytes could not be read.
        """
        end = offset + length
        cache_start = self._cached_chunk_position
        cache_end = cache_start + len(self._cached_chunk)
        # Is the requested chunk within the cache?
        if cache_start <= offset and end <= cache_end:
            if cache_start == offset and end == cache_end:
                return self._cached_chunk  # avoid a copy
            relative_start = offset - cache_start
            return util.buffer(self._cached_chunk, relative_start, length)

        return self._read_and_update_cache(offset, length)

    def _read_and_update_cache(self, offset, length):
        # Cache data both forward and backward around the requested
        # data, in a fixed size window. This helps speed up operations
        # involving reading the revlog backwards.
        real_offset = offset & ~(self.default_cached_chunk_size - 1)
        real_length = (
            (offset + length + self.default_cached_chunk_size)
            & ~(self.default_cached_chunk_size - 1)
        ) - real_offset
        with self._read_handle() as file_obj:
            file_obj.seek(real_offset)
            data = file_obj.read(real_length)

        self._add_cached_chunk(real_offset, data)

        relative_offset = offset - real_offset
        got = len(data) - relative_offset
        if got < length:
            message = PARTIAL_READ_MSG % (self.filename, length, offset, got)
            raise error.RevlogError(message)

        if offset != real_offset or real_length != length:
            return util.buffer(data, relative_offset, length)
        return data

    def _add_cached_chunk(self, offset, data):
        """Add to or replace the cached data chunk.

        Accepts an absolute offset and the data that is at that location.
        """
        if (
            self._cached_chunk_position + len(self._cached_chunk) == offset
            and len(self._cached_chunk) + len(data) < _MAX_CACHED_CHUNK_SIZE
        ):
            # add to existing cache
            self._cached_chunk += data
        else:
            self._cached_chunk = data
            self._cached_chunk_position = offset