tests/test-sparse-profiles.t

hghave: add a check for the `xz` compression utility

This isn't install by default on Mac, which causes a test failure.  The logic
for avoiding the command is a little goofy, but nested `#if` isn't supported,
and it still seems worth running the hg command to see if anything explodes.

With this, the py3 tests run (almost) cleanly on 10.14.6:

    # Ran 835 tests, 58 skipped, 1 failed.

Alas, the mac-packaging test is skipped because it's slow.  The failure here is
in test-releasenotes-merging.t, complaining about not being able to import the
`fuzzywuzzy` module.  I have it installed on py3 (thus the test isn't skipped),
but not on py2.  So there must be some unintended cross pollination here when
running `hg` commands.

Differential Revision: https://phab.mercurial-scm.org/D7374

test sparse

  $ hg init myrepo
  $ cd myrepo
  $ cat > .hg/hgrc <<EOF
  > [extensions]
  > sparse=
  > purge=
  > strip=
  > rebase=
  > EOF

Config file without [section] is rejected

  $ cat > bad.sparse <<EOF
  > *.html
  > EOF

  $ hg debugsparse --import-rules bad.sparse
  abort: sparse config entry outside of section: *.html
  (add an [include] or [exclude] line to declare the entry type)
  [255]
  $ rm bad.sparse

  $ echo a > index.html
  $ echo x > data.py
  $ echo z > readme.txt
  $ cat > webpage.sparse <<EOF
  > # frontend sparse profile
  > [include]
  > *.html
  > EOF
  $ cat > backend.sparse <<EOF
  > # backend sparse profile
  > [include]
  > *.py
  > EOF
  $ hg ci -Aqm 'initial'

  $ hg debugsparse --include '*.sparse'

Verify enabling a single profile works

  $ hg debugsparse --enable-profile webpage.sparse
  $ ls
  backend.sparse
  index.html
  webpage.sparse

Verify enabling two profiles works

  $ hg debugsparse --enable-profile backend.sparse
  $ ls
  backend.sparse
  data.py
  index.html
  webpage.sparse

Verify disabling a profile works

  $ hg debugsparse --disable-profile webpage.sparse
  $ ls
  backend.sparse
  data.py
  webpage.sparse

Verify that a profile is updated across multiple commits

  $ cat > webpage.sparse <<EOF
  > # frontend sparse profile
  > [include]
  > *.html
  > EOF
  $ cat > backend.sparse <<EOF
  > # backend sparse profile
  > [include]
  > *.py
  > *.txt
  > EOF

  $ echo foo >> data.py

  $ hg ci -m 'edit profile'
  $ ls
  backend.sparse
  data.py
  readme.txt
  webpage.sparse

  $ hg up -q 0
  $ ls
  backend.sparse
  data.py
  webpage.sparse

  $ hg up -q 1
  $ ls
  backend.sparse
  data.py
  readme.txt
  webpage.sparse

Introduce a conflicting .hgsparse change

  $ hg up -q 0
  $ cat > backend.sparse <<EOF
  > # Different backend sparse profile
  > [include]
  > *.html
  > EOF
  $ echo bar >> data.py

  $ hg ci -qAm "edit profile other"
  $ ls
  backend.sparse
  index.html
  webpage.sparse

Verify conflicting merge pulls in the conflicting changes

  $ hg merge 1
  temporarily included 2 file(s) in the sparse checkout for merging
  merging backend.sparse
  merging data.py
  warning: conflicts while merging backend.sparse! (edit, then use 'hg resolve --mark')
  warning: conflicts while merging data.py! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 2 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]

  $ rm *.orig
  $ ls
  backend.sparse
  data.py
  index.html
  webpage.sparse

Verify resolving the merge removes the temporarily unioned files

  $ cat > backend.sparse <<EOF
  > # backend sparse profile
  > [include]
  > *.html
  > *.txt
  > EOF
  $ hg resolve -m backend.sparse

  $ cat > data.py <<EOF
  > x
  > foo
  > bar
  > EOF
  $ hg resolve -m data.py
  (no more unresolved files)

  $ hg ci -qAm "merge profiles"
  $ ls
  backend.sparse
  index.html
  readme.txt
  webpage.sparse

  $ hg cat -r . data.py
  x
  foo
  bar

Verify stripping refreshes dirstate

  $ hg strip -q -r .
  $ ls
  backend.sparse
  index.html
  webpage.sparse

Verify rebase conflicts pulls in the conflicting changes

  $ hg up -q 1
  $ ls
  backend.sparse
  data.py
  readme.txt
  webpage.sparse

  $ hg rebase -d 2
  rebasing 1:a2b1de640a62 "edit profile"
  temporarily included 2 file(s) in the sparse checkout for merging
  merging backend.sparse
  merging data.py
  warning: conflicts while merging backend.sparse! (edit, then use 'hg resolve --mark')
  warning: conflicts while merging data.py! (edit, then use 'hg resolve --mark')
  unresolved conflicts (see hg resolve, then hg rebase --continue)
  [1]
  $ rm *.orig
  $ ls
  backend.sparse
  data.py
  index.html
  webpage.sparse

Verify resolving conflict removes the temporary files

  $ cat > backend.sparse <<EOF
  > [include]
  > *.html
  > *.txt
  > EOF
  $ hg resolve -m backend.sparse

  $ cat > data.py <<EOF
  > x
  > foo
  > bar
  > EOF
  $ hg resolve -m data.py
  (no more unresolved files)
  continue: hg rebase --continue

  $ hg rebase -q --continue
  $ ls
  backend.sparse
  index.html
  readme.txt
  webpage.sparse

  $ hg cat -r . data.py
  x
  foo
  bar

Test checking out a commit that does not contain the sparse profile. The
warning message can be suppressed by setting missingwarning = false in
[sparse] section of your config:

  $ hg debugsparse --reset
  $ hg rm *.sparse
  $ hg commit -m "delete profiles"
  $ hg up -q ".^"
  $ hg debugsparse --enable-profile backend.sparse
  $ ls
  index.html
  readme.txt
  $ hg up tip | grep warning
  warning: sparse profile 'backend.sparse' not found in rev bfcb76de99cc - ignoring it
  [1]
  $ ls
  data.py
  index.html
  readme.txt
  $ hg debugsparse --disable-profile backend.sparse | grep warning
  warning: sparse profile 'backend.sparse' not found in rev bfcb76de99cc - ignoring it
  [1]
  $ cat >> .hg/hgrc <<EOF
  > [sparse]
  > missingwarning = false
  > EOF
  $ hg debugsparse --enable-profile backend.sparse

  $ cd ..

#if unix-permissions

Test file permissions changing across a sparse profile change
  $ hg init sparseperm
  $ cd sparseperm
  $ cat > .hg/hgrc <<EOF
  > [extensions]
  > sparse=
  > EOF
  $ touch a b
  $ cat > .hgsparse <<EOF
  > [include]
  > a
  > EOF
  $ hg commit -Aqm 'initial'
  $ chmod a+x b
  $ hg commit -qm 'make executable'
  $ cat >> .hgsparse <<EOF
  > b
  > EOF
  $ hg commit -qm 'update profile'
  $ hg up -q 0
  $ hg debugsparse --enable-profile .hgsparse
  $ hg up -q 2
  $ ls -l b
  -rwxr-xr-x* b (glob)

#endif