tests/drawdag.py

serve: add support for Mercurial subrepositories

I've been using `hg serve --web-conf ...` with a simple '/=projects/**' [paths]
configuration for awhile without issue.  Let's ditch the need for the manual
configuration in this case, and limit the repos served to the actual subrepos.

This doesn't attempt to handle the case where a new subrepo appears while the
server is running.  That could probably be handled with a hook if somebody wants
it.  But it's such a rare case, it probably doesn't matter for the temporary
serves.

The main repo is served at '/', just like a repository without subrepos.  I'm
not sure why the duplicate 'adding ...' lines appear on Linux.  They don't
appear on Windows (see 594dd384803c), so they are optional.

Subrepositories that are configured with '../path' or absolute paths are not
cloneable from the server.  (They aren't cloneable locally either, unless they
also exist at their configured source, perhaps via the share extension.)  They
are still served, so that they can be browsed, or cloned individually.  If we
care about that cloning someday, we can probably just add the extra entries to
the webconf dictionary.  Even if the entries use '../' to escape the root, only
the related subrepositories would end up in the dictionary.

# drawdag.py - convert ASCII revision DAG to actual changesets
#
# Copyright 2016 Facebook, Inc.
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
"""
create changesets from an ASCII graph for testing purpose.

For example, given the following input::

    c d
    |/
    b
    |
    a

4 changesets and 4 local tags will be created.
`hg log -G -T "{rev} {desc} (tag: {tags})"` will output::

    o  3 d (tag: d tip)
    |
    | o  2 c (tag: c)
    |/
    o  1 b (tag: b)
    |
    o  0 a (tag: a)

For root nodes (nodes without parents) in the graph, they can be revsets
pointing to existing nodes.  The ASCII graph could also have disconnected
components with same names referring to the same changeset.

Therefore, given the repo having the 4 changesets (and tags) above, with the
following ASCII graph as input::

    foo    bar       bar  foo
     |     /          |    |
    ancestor(c,d)     a   baz

The result (`hg log -G -T "{desc}"`) will look like::

    o    foo
    |\
    +---o  bar
    | | |
    | o |  baz
    |  /
    +---o  d
    | |
    +---o  c
    | |
    o |  b
    |/
    o  a

Note that if you take the above `hg log` output directly as input. It will work
as expected - the result would be an isomorphic graph::

    o    foo
    |\
    | | o  d
    | |/
    | | o  c
    | |/
    | | o  bar
    | |/|
    | o |  b
    | |/
    o /  baz
     /
    o  a

This is because 'o' is specially handled in the input: instead of using 'o' as
the node name, the word to the right will be used.
"""
from __future__ import absolute_import, print_function

import collections
import itertools

from mercurial.i18n import _
from mercurial import (
    cmdutil,
    context,
    error,
    node,
    scmutil,
    tags as tagsmod,
)

cmdtable = {}
command = cmdutil.command(cmdtable)

_pipechars = '\\/+-|'
_nonpipechars = ''.join(chr(i) for i in xrange(33, 127)
                        if chr(i) not in _pipechars)

def _isname(ch):
    """char -> bool. return True if ch looks like part of a name, False
    otherwise"""
    return ch in _nonpipechars

def _parseasciigraph(text):
    """str -> {str : [str]}. convert the ASCII graph to edges"""
    lines = text.splitlines()
    edges = collections.defaultdict(list)  # {node: []}

    def get(y, x):
        """(int, int) -> char. give a coordinate, return the char. return a
        space for anything out of range"""
        if x < 0 or y < 0:
            return ' '
        try:
            return lines[y][x]
        except IndexError:
            return ' '

    def getname(y, x):
        """(int, int) -> str. like get(y, x) but concatenate left and right
        parts. if name is an 'o', try to replace it to the right"""
        result = ''
        for i in itertools.count(0):
            ch = get(y, x - i)
            if not _isname(ch):
                break
            result = ch + result
        for i in itertools.count(1):
            ch = get(y, x + i)
            if not _isname(ch):
                break
            result += ch
        if result == 'o':
            # special handling, find the name to the right
            result = ''
            for i in itertools.count(2):
                ch = get(y, x + i)
                if ch == ' ' or ch in _pipechars:
                    if result or x + i >= len(lines[y]):
                        break
                else:
                    result += ch
            return result or 'o'
        return result

    def parents(y, x):
        """(int, int) -> [str]. follow the ASCII edges at given position,
        return a list of parents"""
        visited = set([(y, x)])
        visit = []
        result = []

        def follow(y, x, expected):
            """conditionally append (y, x) to visit array, if it's a char
            in excepted. 'o' in expected means an '_isname' test.
            if '-' (or '+') is not in excepted, and get(y, x) is '-' (or '+'),
            the next line (y + 1, x) will be checked instead."""
            ch = get(y, x)
            if any(ch == c and c not in expected for c in '-+'):
                y += 1
                return follow(y + 1, x, expected)
            if ch in expected or ('o' in expected and _isname(ch)):
                visit.append((y, x))

        #  -o-  # starting point:
        #  /|\ # follow '-' (horizontally), and '/|\' (to the bottom)
        follow(y + 1, x, '|')
        follow(y + 1, x - 1, '/')
        follow(y + 1, x + 1, '\\')
        follow(y, x - 1, '-')
        follow(y, x + 1, '-')

        while visit:
            y, x = visit.pop()
            if (y, x) in visited:
                continue
            visited.add((y, x))
            ch = get(y, x)
            if _isname(ch):
                result.append(getname(y, x))
                continue
            elif ch == '|':
                follow(y + 1, x, '/|o')
                follow(y + 1, x - 1, '/')
                follow(y + 1, x + 1, '\\')
            elif ch == '+':
                follow(y, x - 1, '-')
                follow(y, x + 1, '-')
                follow(y + 1, x - 1, '/')
                follow(y + 1, x + 1, '\\')
                follow(y + 1, x, '|')
            elif ch == '\\':
                follow(y + 1, x + 1, '\\|o')
            elif ch == '/':
                follow(y + 1, x - 1, '/|o')
            elif ch == '-':
                follow(y, x - 1, '-+o')
                follow(y, x + 1, '-+o')
        return result

    for y, line in enumerate(lines):
        for x, ch in enumerate(line):
            if ch == '#':  # comment
                break
            if _isname(ch):
                edges[getname(y, x)] += parents(y, x)

    return dict(edges)

class simplefilectx(object):
    def __init__(self, path, data):
        self._data = data
        self._path = path

    def data(self):
        return self._data

    def path(self):
        return self._path

    def renamed(self):
        return None

    def flags(self):
        return ''

class simplecommitctx(context.committablectx):
    def __init__(self, repo, name, parentctxs, added=None):
        opts = {
            'changes': scmutil.status([], added or [], [], [], [], [], []),
            'date': '0 0',
            'extra': {'branch': 'default'},
        }
        super(simplecommitctx, self).__init__(self, name, **opts)
        self._repo = repo
        self._name = name
        self._parents = parentctxs
        self._parents.sort(key=lambda c: c.node())
        while len(self._parents) < 2:
            self._parents.append(repo[node.nullid])

    def filectx(self, key):
        return simplefilectx(key, self._name)

    def commit(self):
        return self._repo.commitctx(self)

def _walkgraph(edges):
    """yield node, parents in topologically order"""
    visible = set(edges.keys())
    remaining = {}  # {str: [str]}
    for k, vs in edges.iteritems():
        for v in vs:
            if v not in remaining:
                remaining[v] = []
        remaining[k] = vs[:]
    while remaining:
        leafs = [k for k, v in remaining.items() if not v]
        if not leafs:
            raise error.Abort(_('the graph has cycles'))
        for leaf in sorted(leafs):
            if leaf in visible:
                yield leaf, edges[leaf]
            del remaining[leaf]
            for k, v in remaining.iteritems():
                if leaf in v:
                    v.remove(leaf)

@command('debugdrawdag', [])
def debugdrawdag(ui, repo, **opts):
    """read an ASCII graph from stdin and create changesets

    The ASCII graph is like what :hg:`log -G` outputs, with each `o` replaced
    to the name of the node. The command will create dummy changesets and local
    tags with those names to make the dummy changesets easier to be referred
    to.

    If the name of a node is a single character 'o', It will be replaced by the
    word to the right. This makes it easier to reuse
    :hg:`log -G -T '{desc}'` outputs.

    For root (no parents) nodes, revset can be used to query existing repo.
    Note that the revset cannot have confusing characters which can be seen as
    the part of the graph edges, like `|/+-\`.
    """
    text = ui.fin.read()

    # parse the graph and make sure len(parents) <= 2 for each node
    edges = _parseasciigraph(text)
    for k, v in edges.iteritems():
        if len(v) > 2:
            raise error.Abort(_('%s: too many parents: %s')
                              % (k, ' '.join(v)))

    committed = {None: node.nullid}  # {name: node}

    # for leaf nodes, try to find existing nodes in repo
    for name, parents in edges.iteritems():
        if len(parents) == 0:
            try:
                committed[name] = scmutil.revsingle(repo, name)
            except error.RepoLookupError:
                pass

    # commit in topological order
    for name, parents in _walkgraph(edges):
        if name in committed:
            continue
        pctxs = [repo[committed[n]] for n in parents]
        ctx = simplecommitctx(repo, name, pctxs, [name])
        n = ctx.commit()
        committed[name] = n
        tagsmod.tag(repo, name, n, message=None, user=None, date=None,
                    local=True)