tests/test-pager.t

phases: large rewrite on retract boundary

The new code is still pure Python, so we still have room to going significantly
faster. However its complexity of the complex part is `O(|[min_new_draft, tip]|)` instead of
`O(|[min_draft, tip]|` which should help tremendously one repository with old
draft (like mercurial-devel or mozilla-try).

This is especially useful as the most common "retract boundary" operation
happens when we commit/rewrite new drafts or when we push new draft to a
non-publishing server. In this case, the smallest new_revs is very close to the
tip and there is very few work to do.

A few smaller optimisation could be done for these cases and will be introduced in
later changesets.

We still have iterate over large sets of roots, but this is already a great
improvement for a very small amount of work. We gather information on the
affected changeset as we go as we can put it to use in the next changesets.
This extra data collection might slowdown the `register_new` case a bit, however
for register_new, it should not really matters. The set of new nodes is either
small, so the impact is negligible, or the set of new nodes is large, and the
amount of work to do to had them will dominate the overhead the collecting
information in `changed_revs`.

As this new code compute the changes on the fly, it unlock other interesting
improvement to be done in later changeset.

  $ cat >> fakepager.py <<EOF
  > import sys
  > printed = False
  > for line in sys.stdin:
  >     sys.stdout.write('paged! %r\n' % line)
  >     printed = True
  > if not printed:
  >     sys.stdout.write('paged empty output!\n')
  > EOF

Enable ui.formatted because pager won't fire without it, and set up
pager and tell it to use our fake pager that lets us see when the
pager was running.
  $ cat >> $HGRCPATH <<EOF
  > [ui]
  > formatted = yes
  > color = no
  > [pager]
  > pager = "$PYTHON" $TESTTMP/fakepager.py
  > EOF

  $ hg init repo
  $ cd repo
  $ echo a >> a
  $ hg add a
  $ hg ci -m 'add a'
  $ for x in `"$PYTHON" $TESTDIR/seq.py 1 10`; do
  >   echo a $x >> a
  >   hg ci -m "modify a $x"
  > done

By default diff and log are paged, but id is not:

  $ hg diff -c 2 --pager=yes
  paged! 'diff -r f4be7687d414 -r bce265549556 a\n'
  paged! '--- a/a\tThu Jan 01 00:00:00 1970 +0000\n'
  paged! '+++ b/a\tThu Jan 01 00:00:00 1970 +0000\n'
  paged! '@@ -1,2 +1,3 @@\n'
  paged! ' a\n'
  paged! ' a 1\n'
  paged! '+a 2\n'

  $ hg log --limit 2
  paged! 'changeset:   10:46106edeeb38\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'
  paged! 'changeset:   9:6dd8ea7dd621\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 9\n'
  paged! '\n'

  $ hg id
  46106edeeb38 tip

We can control the pager from the config

  $ hg log --limit 1 --config 'ui.paginate=False'
  changeset:   10:46106edeeb38
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify a 10
  
  $ hg log --limit 1 --config 'ui.paginate=0'
  changeset:   10:46106edeeb38
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify a 10
  
  $ hg log --limit 1 --config 'ui.paginate=1'
  paged! 'changeset:   10:46106edeeb38\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'

explicit --pager=on should take precedence over other configurations
(issue5580)

  $ cat >> $HGRCPATH <<EOF
  > [ui]
  > paginate = false
  > EOF
  $ hg log --limit 1 --pager=on
  paged! 'changeset:   10:46106edeeb38\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'

  $ cat >> $HGRCPATH <<EOF
  > [ui]
  > # true is default value of ui.paginate
  > paginate = true
  > EOF
  $ hg log --limit 1 --pager=off
  changeset:   10:46106edeeb38
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify a 10
  

We can enable the pager on id:

BROKEN: should be paged
  $ hg --config pager.attend-id=yes id
  46106edeeb38 tip

Setting attend-$COMMAND to a false value works, even with pager in
core:
  $ hg --config pager.attend-diff=no diff -c 2
  diff -r f4be7687d414 -r bce265549556 a
  --- a/a	Thu Jan 01 00:00:00 1970 +0000
  +++ b/a	Thu Jan 01 00:00:00 1970 +0000
  @@ -1,2 +1,3 @@
   a
   a 1
  +a 2

Command aliases should have same behavior as main command

  $ hg history --limit 2
  paged! 'changeset:   10:46106edeeb38\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'
  paged! 'changeset:   9:6dd8ea7dd621\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 9\n'
  paged! '\n'

Abbreviated command alias should also be paged

  $ hg hist -l 1
  paged! 'changeset:   10:46106edeeb38\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'

Attend for an abbreviated command does not work

  $ hg --config pager.attend-ident=true ident
  46106edeeb38 tip

  $ hg --config extensions.pager= --config pager.attend-ident=true ident
  46106edeeb38 tip

Pager should not start if stdout is not a tty.

  $ hg log -l1 -q --config ui.formatted=False
  10:46106edeeb38

Pager should be disabled if pager.pager is empty (otherwise the output would
be silently lost.)

  $ hg log -l1 -q --config pager.pager=
  10:46106edeeb38

Pager with color enabled allows colors to come through by default,
even though stdout is no longer a tty.
  $ cat >> $HGRCPATH <<EOF
  > [ui]
  > color = always
  > [color]
  > mode = ansi
  > EOF
  $ hg log --limit 3
  paged! '\x1b[0;33mchangeset:   10:46106edeeb38\x1b[0m\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'
  paged! '\x1b[0;33mchangeset:   9:6dd8ea7dd621\x1b[0m\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 9\n'
  paged! '\n'
  paged! '\x1b[0;33mchangeset:   8:cff05a6312fe\x1b[0m\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 8\n'
  paged! '\n'

#if no-chg
An invalid pager command name is reported sensibly if we don't have to
use shell=True in the subprocess call:
  $ hg log --limit 3 --config pager.pager=this-command-better-never-exist
  missing pager command 'this-command-better-never-exist', skipping pager
  \x1b[0;33mchangeset:   10:46106edeeb38\x1b[0m (esc)
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify a 10
  
  \x1b[0;33mchangeset:   9:6dd8ea7dd621\x1b[0m (esc)
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify a 9
  
  \x1b[0;33mchangeset:   8:cff05a6312fe\x1b[0m (esc)
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify a 8
  
#endif

A complicated pager command gets worse behavior. Bonus points if you can
improve this. Windows apparently does this better, but only sometimes?
#if windows
  $ hg log --limit 3 \
  >   --config pager.pager='this-command-better-never-exist --seriously' \
  >  2>/dev/null || true
  \x1b[0;33mchangeset:   10:46106edeeb38\x1b[0m (esc) (?)
  tag:         tip (?)
  user:        test (?)
  date:        Thu Jan 01 00:00:00 1970 +0000 (?)
  summary:     modify a 10 (?)
   (?)
  \x1b[0;33mchangeset:   9:6dd8ea7dd621\x1b[0m (esc) (?)
  user:        test (?)
  date:        Thu Jan 01 00:00:00 1970 +0000 (?)
  summary:     modify a 9 (?)
   (?)
  \x1b[0;33mchangeset:   8:cff05a6312fe\x1b[0m (esc) (?)
  user:        test (?)
  date:        Thu Jan 01 00:00:00 1970 +0000 (?)
  summary:     modify a 8 (?)
   (?)
#else
  $ hg log --limit 3 \
  >   --config pager.pager='this-command-better-never-exist --seriously' \
  >  2>/dev/null || true
#endif

Pager works with shell aliases.

  $ cat >> $HGRCPATH <<EOF
  > [alias]
  > echoa = !echo a
  > EOF

  $ hg echoa
  a
BROKEN: should be paged
  $ hg --config pager.attend-echoa=yes echoa
  a

Pager works with hg aliases including environment variables.

  $ cat >> $HGRCPATH <<'EOF'
  > [alias]
  > printa = log -T "$A\n" -r 0
  > EOF

  $ A=1 hg --config pager.attend-printa=yes printa
  paged! '1\n'
  $ A=2 hg --config pager.attend-printa=yes printa
  paged! '2\n'

Something that's explicitly attended is still not paginated if the
pager is globally set to off using a flag:
  $ A=2 hg --config pager.attend-printa=yes printa --pager=no
  2

Pager should not override the exit code of other commands

  $ cat >> $TESTTMP/fortytwo.py <<'EOF'
  > from mercurial import commands, registrar
  > cmdtable = {}
  > command = registrar.command(cmdtable)
  > @command(b'fortytwo', [], b'fortytwo', norepo=True)
  > def fortytwo(ui, *opts):
  >     ui.write(b'42\n')
  >     return 42
  > EOF

  $ cat >> $HGRCPATH <<'EOF'
  > [extensions]
  > fortytwo = $TESTTMP/fortytwo.py
  > EOF

  $ hg fortytwo --pager=on
  paged! '42\n'
  [42]

A command that asks for paging using ui.pager() directly works:
  $ hg blame a
  paged! ' 0: a\n'
  paged! ' 1: a 1\n'
  paged! ' 2: a 2\n'
  paged! ' 3: a 3\n'
  paged! ' 4: a 4\n'
  paged! ' 5: a 5\n'
  paged! ' 6: a 6\n'
  paged! ' 7: a 7\n'
  paged! ' 8: a 8\n'
  paged! ' 9: a 9\n'
  paged! '10: a 10\n'
but not with HGPLAIN
  $ HGPLAIN=1 hg blame a
   0: a
   1: a 1
   2: a 2
   3: a 3
   4: a 4
   5: a 5
   6: a 6
   7: a 7
   8: a 8
   9: a 9
  10: a 10
explicit flags work too:
  $ hg blame --pager=no a
   0: a
   1: a 1
   2: a 2
   3: a 3
   4: a 4
   5: a 5
   6: a 6
   7: a 7
   8: a 8
   9: a 9
  10: a 10

A command with --output option:

  $ hg cat -r0 a
  paged! 'a\n'
  $ hg cat -r0 a --output=-
  paged! 'a\n'
  $ hg cat -r0 a --output=out

  $ hg export -r0
  paged! '# HG changeset patch\n'
  paged! '# User test\n'
  paged! '# Date 0 0\n'
  paged! '#      Thu Jan 01 00:00:00 1970 +0000\n'
  paged! '# Node ID 1f0dee641bb7258c56bd60e93edfa2405381c41e\n'
  paged! '# Parent  0000000000000000000000000000000000000000\n'
  paged! 'add a\n'
  paged! '\n'
  paged! '\x1b[0;1mdiff -r 000000000000 -r 1f0dee641bb7 a\x1b[0m\n'
  paged! '\x1b[0;31;1m--- /dev/null\tThu Jan 01 00:00:00 1970 +0000\x1b[0m\n'
  paged! '\x1b[0;32;1m+++ b/a\tThu Jan 01 00:00:00 1970 +0000\x1b[0m\n'
  paged! '\x1b[0;35m@@ -0,0 +1,1 @@\x1b[0m\n'
  paged! '\x1b[0;32m+a\x1b[0m\n'
  $ hg export -r0 -o -
  paged! '# HG changeset patch\n'
  paged! '# User test\n'
  paged! '# Date 0 0\n'
  paged! '#      Thu Jan 01 00:00:00 1970 +0000\n'
  paged! '# Node ID 1f0dee641bb7258c56bd60e93edfa2405381c41e\n'
  paged! '# Parent  0000000000000000000000000000000000000000\n'
  paged! 'add a\n'
  paged! '\n'
  paged! '\x1b[0;1mdiff -r 000000000000 -r 1f0dee641bb7 a\x1b[0m\n'
  paged! '\x1b[0;31;1m--- /dev/null\tThu Jan 01 00:00:00 1970 +0000\x1b[0m\n'
  paged! '\x1b[0;32;1m+++ b/a\tThu Jan 01 00:00:00 1970 +0000\x1b[0m\n'
  paged! '\x1b[0;35m@@ -0,0 +1,1 @@\x1b[0m\n'
  paged! '\x1b[0;32m+a\x1b[0m\n'
  $ hg export -r0 -o out

  $ rm out

Put annotate in the ignore list for pager:
  $ cat >> $HGRCPATH <<EOF
  > [pager]
  > ignore = annotate
  > EOF
  $ hg blame a
   0: a
   1: a 1
   2: a 2
   3: a 3
   4: a 4
   5: a 5
   6: a 6
   7: a 7
   8: a 8
   9: a 9
  10: a 10

During pushbuffer, pager should not start:
  $ cat > $TESTTMP/pushbufferpager.py <<EOF
  > def uisetup(ui):
  >     ui.pushbuffer()
  >     ui.pager(b'mycmd')
  >     ui.write(b'content\n')
  >     ui.write(ui.popbuffer())
  > EOF

  $ echo append >> a
  $ hg --config extensions.pushbuffer=$TESTTMP/pushbufferpager.py status --color=off
  content
  paged! 'M a\n'

Environment variables like LESS and LV are set automatically:
  $ cat > $TESTTMP/printlesslv.py <<EOF
  > import os
  > import sys
  > sys.stdin.read()
  > for name in ['LESS', 'LV']:
  >     sys.stdout.write(('%s=%s\n') % (name, os.environ.get(name, '-')))
  > sys.stdout.flush()
  > EOF

  $ cat >> $HGRCPATH <<EOF
  > [alias]
  > noop = log -r 0 -T ''
  > [ui]
  > formatted=1
  > [pager]
  > pager = "$PYTHON" $TESTTMP/printlesslv.py
  > EOF
  $ unset LESS
  $ unset LV
  $ hg noop --pager=on
  LESS=FRX
  LV=-c
  $ LESS=EFGH hg noop --pager=on
  LESS=EFGH
  LV=-c