annotate tests/test-status.t @ 49280:311fcc5a65f6

thirdparty: remove Python 2-specific selectors2 copy

The selectors module was added in Python 3.4. Because we require Python 3.6, it
will always be available. Therefore the selectors2 module is not imported.

I’ve verified that the selectors2-specific workaround in commandserver.py is not
necessary with the selectors module from the standard library. It returns an
empty list if timeout was exceeded.

The pytype directive was needed to silence the following error:

File "/tmp/mercurial-ci/mercurial/worker.py", line 299, in _posixworker: No attribute 'close' on int [attribute-error]
  In Union[_typeshed.HasFileno, int]
File "/tmp/mercurial-ci/mercurial/worker.py", line 299, in _posixworker: No attribute 'close' on _typeshed.HasFileno [attribute-error]
  In Union[_typeshed.HasFileno, int]

#testcases dirstate-v1 dirstate-v2

#if dirstate-v2
  $ cat >> $HGRCPATH << EOF
  > [format]
  > use-dirstate-v2=1
  > [storage]
  > dirstate-v2.slow-path=allow
  > EOF
#endif

  $ hg init repo1
  $ cd repo1
  $ mkdir a b a/1 b/1 b/2
  $ touch in_root a/in_a b/in_b a/1/in_a_1 b/1/in_b_1 b/2/in_b_2

hg status in repo root:

  $ hg status
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root

hg status . in repo root:

  $ hg status .
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root

  $ hg status --cwd a
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root
  $ hg status --cwd a .
  ? 1/in_a_1
  ? in_a
  $ hg status --cwd a ..
  ? 1/in_a_1
  ? in_a
  ? ../b/1/in_b_1
  ? ../b/2/in_b_2
  ? ../b/in_b
  ? ../in_root

  $ hg status --cwd b
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root
  $ hg status --cwd b .
  ? 1/in_b_1
  ? 2/in_b_2
  ? in_b
  $ hg status --cwd b ..
  ? ../a/1/in_a_1
  ? ../a/in_a
  ? 1/in_b_1
  ? 2/in_b_2
  ? in_b
  ? ../in_root

  $ hg status --cwd a/1
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root
  $ hg status --cwd a/1 .
  ? in_a_1
  $ hg status --cwd a/1 ..
  ? in_a_1
  ? ../in_a

  $ hg status --cwd b/1
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root
  $ hg status --cwd b/1 .
  ? in_b_1
  $ hg status --cwd b/1 ..
  ? in_b_1
  ? ../2/in_b_2
  ? ../in_b

  $ hg status --cwd b/2
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root
  $ hg status --cwd b/2 .
  ? in_b_2
  $ hg status --cwd b/2 ..
  ? ../1/in_b_1
  ? in_b_2
  ? ../in_b

combining patterns with root and patterns without a root works

  $ hg st a/in_a re:.*b$
  ? a/in_a
  ? b/in_b

tweaking defaults works
  $ hg status --cwd a --config ui.tweakdefaults=yes
  ? 1/in_a_1
  ? in_a
  ? ../b/1/in_b_1
  ? ../b/2/in_b_2
  ? ../b/in_b
  ? ../in_root
  $ HGPLAIN=1 hg status --cwd a --config ui.tweakdefaults=yes
  ? a/1/in_a_1 (glob)
  ? a/in_a (glob)
  ? b/1/in_b_1 (glob)
  ? b/2/in_b_2 (glob)
  ? b/in_b (glob)
  ? in_root
  $ HGPLAINEXCEPT=tweakdefaults hg status --cwd a --config ui.tweakdefaults=yes
  ? 1/in_a_1
  ? in_a
  ? ../b/1/in_b_1
  ? ../b/2/in_b_2
  ? ../b/in_b
  ? ../in_root (glob)

relative paths can be requested

  $ hg status --cwd a --config ui.relative-paths=yes
  ? 1/in_a_1
  ? in_a
  ? ../b/1/in_b_1
  ? ../b/2/in_b_2
  ? ../b/in_b
  ? ../in_root

  $ hg status --cwd a . --config ui.relative-paths=legacy
  ? 1/in_a_1
  ? in_a
  $ hg status --cwd a . --config ui.relative-paths=no
  ? a/1/in_a_1
  ? a/in_a

commands.status.relative overrides ui.relative-paths

  $ cat >> $HGRCPATH <<EOF
  > [ui]
  > relative-paths = False
  > [commands]
  > status.relative = True
  > EOF
  $ hg status --cwd a
  ? 1/in_a_1
  ? in_a
  ? ../b/1/in_b_1
  ? ../b/2/in_b_2
  ? ../b/in_b
  ? ../in_root
  $ HGPLAIN=1 hg status --cwd a
  ? a/1/in_a_1 (glob)
  ? a/in_a (glob)
  ? b/1/in_b_1 (glob)
  ? b/2/in_b_2 (glob)
  ? b/in_b (glob)
  ? in_root

if relative paths are explicitly off, tweakdefaults doesn't change it
  $ cat >> $HGRCPATH <<EOF
  > [commands]
  > status.relative = False
  > EOF
  $ hg status --cwd a --config ui.tweakdefaults=yes
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root

  $ cd ..

  $ hg init repo2
  $ cd repo2
  $ touch modified removed deleted ignored
  $ echo "^ignored$" > .hgignore
  $ hg ci -A -m 'initial checkin'
  adding .hgignore
  adding deleted
  adding modified
  adding removed
  $ touch modified added unknown ignored
  $ hg add added
  $ hg remove removed
  $ rm deleted

hg status:

  $ hg status
  A added
  R removed
  ! deleted
  ? unknown

hg status -n:
  $ env RHG_ON_UNSUPPORTED=abort hg status -n
  added
  removed
  deleted
  unknown

hg status modified added removed deleted unknown never-existed ignored:

  $ hg status modified added removed deleted unknown never-existed ignored
  never-existed: * (glob)
  A added
  R removed
  ! deleted
  ? unknown

  $ hg copy modified copied

hg status -C:

  $ hg status -C
  A added
  A copied
    modified
  R removed
  ! deleted
  ? unknown

hg status -A:

  $ hg status -A
  A added
  A copied
    modified
  R removed
  ! deleted
  ? unknown
  I ignored
  C .hgignore
  C modified

  $ hg status -A -T '{status} {path} {node|shortest}\n'
  A added ffff
  A copied ffff
  R removed ffff
  ! deleted ffff
  ? unknown ffff
  I ignored ffff
  C .hgignore ffff
  C modified ffff

  $ hg status -A -Tjson
  [
   {
    "itemtype": "file",
    "path": "added",
    "status": "A"
   },
   {
    "itemtype": "file",
    "path": "copied",
    "source": "modified",
    "status": "A"
   },
   {
    "itemtype": "file",
    "path": "removed",
    "status": "R"
   },
   {
    "itemtype": "file",
    "path": "deleted",
    "status": "!"
   },
   {
    "itemtype": "file",
    "path": "unknown",
    "status": "?"
   },
   {
    "itemtype": "file",
    "path": "ignored",
    "status": "I"
   },
   {
    "itemtype": "file",
    "path": ".hgignore",
    "status": "C"
   },
   {
    "itemtype": "file",
    "path": "modified",
    "status": "C"
   }
  ]

  $ hg status -A -Tpickle > pickle
  >>> import pickle
  >>> from mercurial import util
  >>> data = sorted((x[b'status'].decode(), x[b'path'].decode()) for x in pickle.load(open("pickle", r"rb")))
  >>> for s, p in data: print("%s %s" % (s, p))
  ! deleted
  ? pickle
  ? unknown
  A added
  A copied
  C .hgignore
  C modified
  I ignored
  R removed
  $ rm pickle

  $ echo "^ignoreddir$" > .hgignore
  $ mkdir ignoreddir
  $ touch ignoreddir/file

Test templater support:

  $ hg status -AT "[{status}]\t{if(source, '{source} -> ')}{path}\n"
  [M]	.hgignore
  [A]	added
  [A]	modified -> copied
  [R]	removed
  [!]	deleted
  [?]	ignored
  [?]	unknown
  [I]	ignoreddir/file
  [C]	modified
  $ hg status -AT default
  M .hgignore
  A added
  A copied
    modified
  R removed
  ! deleted
  ? ignored
  ? unknown
  I ignoreddir/file
  C modified
  $ hg status -T compact
  abort: "status" not in template map
  [255]

hg status ignoreddir/file:

  $ hg status ignoreddir/file

hg status -i ignoreddir/file:

  $ hg status -i ignoreddir/file
  I ignoreddir/file
  $ cd ..

Check 'status -q' and some combinations

  $ hg init repo3
  $ cd repo3
  $ touch modified removed deleted ignored
  $ echo "^ignored$" > .hgignore
  $ hg commit -A -m 'initial checkin'
  adding .hgignore
  adding deleted
  adding modified
  adding removed
  $ touch added unknown ignored
  $ hg add added
  $ echo "test" >> modified
  $ hg remove removed
  $ rm deleted
  $ hg copy modified copied

Specify working directory revision explicitly, that should be the same as
"hg status"

  $ hg status --change "wdir()"
  M modified
  A added
  A copied
  R removed
  ! deleted
  ? unknown

Run status with 2 different flags.
Check if result is the same or different.
If result is not as expected, raise error

  $ assert() {
  >     hg status $1 > ../a
  >     hg status $2 > ../b
  >     if diff ../a ../b > /dev/null; then
  >         out=0
  >     else
  >         out=1
  >     fi
  >     if [ $3 -eq 0 ]; then
  >         df="same"
  >     else
  >         df="different"
  >     fi
  >     if [ $out -ne $3 ]; then
  >         echo "Error on $1 and $2, should be $df."
  >     fi
  > }

Assert flag1 flag2 [0-same | 1-different]

  $ assert "-q" "-mard"      0
  $ assert "-A" "-marduicC"  0
  $ assert "-qA" "-mardcC"   0
  $ assert "-qAui" "-A"      0
  $ assert "-qAu" "-marducC" 0
  $ assert "-qAi" "-mardicC" 0
  $ assert "-qu" "-u"        0
  $ assert "-q" "-u"         1
  $ assert "-m" "-a"         1
  $ assert "-r" "-d"         1
  $ cd ..

  $ hg init repo4
  $ cd repo4
  $ touch modified removed deleted
  $ hg ci -q -A -m 'initial checkin'
  $ touch added unknown
  $ hg add added
  $ hg remove removed
  $ rm deleted
  $ echo x > modified
  $ hg copy modified copied
  $ hg ci -m 'test checkin' -d "1000001 0"
  $ rm *
  $ touch unrelated
  $ hg ci -q -A -m 'unrelated checkin' -d "1000002 0"

hg status --change 1:

  $ hg status --change 1
  M modified
  A added
  A copied
  R removed

hg status --change 1 unrelated:

  $ hg status --change 1 unrelated

hg status -C --change 1 added modified copied removed deleted:

  $ hg status -C --change 1 added modified copied removed deleted
  M modified
  A added
  A copied
    modified
  R removed

hg status -A --change 1 and revset:

  $ hg status -A --change '1|1'
  M modified
  A added
  A copied
    modified
  R removed
  C deleted

  $ cd ..

hg status with --rev and reverted changes:

  $ hg init reverted-changes-repo
  $ cd reverted-changes-repo
  $ echo a > file
  $ hg add file
  $ hg ci -m a
  $ echo b > file
  $ hg ci -m b

reverted file should appear clean

  $ hg revert -r 0 .
  reverting file
  $ hg status -A --rev 0
  C file

#if execbit
reverted file with changed flag should appear modified

  $ chmod +x file
  $ hg status -A --rev 0
  M file

  $ hg revert -r 0 .
  reverting file

reverted and committed file with changed flag should appear modified

  $ hg co -C .
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ chmod +x file
  $ hg ci -m 'change flag'
  $ hg status -A --rev 1 --rev 2
  M file
  $ hg diff -r 1 -r 2

#endif

  $ cd ..

hg status of binary file starting with '\1\n', a separator for metadata:

  $ hg init repo5
  $ cd repo5
  >>> open("010a", r"wb").write(b"\1\nfoo") and None
  $ hg ci -q -A -m 'initial checkin'
  $ hg status -A
  C 010a

  >>> open("010a", r"wb").write(b"\1\nbar") and None
  $ hg status -A
  M 010a
  $ hg ci -q -m 'modify 010a'
  $ hg status -A --rev 0:1
  M 010a

  $ touch empty
  $ hg ci -q -A -m 'add another file'
  $ hg status -A --rev 1:2 010a
  C 010a

  $ cd ..

test "hg status" with "directory pattern" which matches against files
only known on target revision.

  $ hg init repo6
  $ cd repo6

  $ echo a > a.txt
  $ hg add a.txt
  $ hg commit -m '#0'
  $ mkdir -p 1/2/3/4/5
  $ echo b > 1/2/3/4/5/b.txt
  $ hg add 1/2/3/4/5/b.txt
  $ hg commit -m '#1'

  $ hg update -C 0 > /dev/null
  $ hg status -A
  C a.txt

the directory matching against specified pattern should be removed,
because directory existence prevents 'dirstate.walk()' from showing
warning message about such pattern.

  $ test ! -d 1
  $ hg status -A --rev 1 1/2/3/4/5/b.txt
  R 1/2/3/4/5/b.txt
  $ hg status -A --rev 1 1/2/3/4/5
  R 1/2/3/4/5/b.txt
  $ hg status -A --rev 1 1/2/3
  R 1/2/3/4/5/b.txt
  $ hg status -A --rev 1 1
  R 1/2/3/4/5/b.txt

  $ hg status --config ui.formatdebug=True --rev 1 1
  status = [
      {
          'itemtype': 'file',
          'path': '1/2/3/4/5/b.txt',
          'status': 'R'
      },
  ]

#if windows
  $ hg --config ui.slash=false status -A --rev 1 1
  R 1\2\3\4\5\b.txt
#endif

  $ cd ..

Status after move overwriting a file (issue4458)
=================================================


  $ hg init issue4458
  $ cd issue4458
  $ echo a > a
  $ echo b > b
  $ hg commit -Am base
  adding a
  adding b


with --force

  $ hg mv b --force a
  $ hg st --copies
  M a
    b
  R b
  $ hg revert --all
  reverting a
  undeleting b
  $ rm *.orig

without force

  $ hg rm a
  $ hg st --copies
  R a
  $ hg mv b a
  $ hg st --copies
  M a
    b
  R b

using ui.statuscopies setting
  $ hg st --config ui.statuscopies=true
  M a
    b
  R b
  $ hg st --config ui.statuscopies=false
  M a
  R b
  $ hg st --config ui.tweakdefaults=yes
  M a
    b
  R b

using log status template (issue5155)
  $ hg log -Tstatus -r 'wdir()' -C
  changeset:   2147483647:ffffffffffff
  parent:      0:8c55c58b4c0e
  user:        test
  date:        * (glob)
  files:
  M a
    b
  R b
  
  $ hg log -GTstatus -r 'wdir()' -C
  o  changeset:   2147483647:ffffffffffff
  |  parent:      0:8c55c58b4c0e
  ~  user:        test
     date:        * (glob)
     files:
     M a
       b
     R b
  

Other "bug" highlight, the revision status does not report the copy information.
This is buggy behavior.

  $ hg commit -m 'blah'
  $ hg st --copies --change .
  M a
  R b

using log status template, the copy information is displayed correctly.
  $ hg log -Tstatus -r. -C
  changeset:   1:6685fde43d21
  tag:         tip
  user:        test
  date:        * (glob)
  summary:     blah
  files:
  M a
    b
  R b
  

  $ cd ..

Make sure .hg doesn't show up even as a symlink

  $ hg init repo0
  $ mkdir symlink-repo0
  $ cd symlink-repo0
  $ ln -s ../repo0/.hg
  $ hg status

If the size hasn’t changed but mtime has, status needs to read the contents
of the file to check whether it has changed

  $ echo 1 > a
  $ echo 1 > b
  $ touch -t 200102030000 a b
  $ hg commit -Aqm '#0'
  $ echo 2 > a
  $ touch -t 200102040000 a b
  $ hg status
  M a

Asking specifically for the status of a deleted/removed file

  $ rm a
  $ rm b
  $ hg status a
  ! a
  $ hg rm a
  $ hg rm b
  $ hg status a
  R a
  $ hg commit -qm '#1'
  $ hg status a
  a: $ENOENT$

Check using include flag with pattern when status does not need to traverse
the working directory (issue6483)

  $ cd ..
  $ hg init issue6483
  $ cd issue6483
  $ touch a.py b.rs
  $ hg add a.py b.rs
  $ hg st -aI "*.py"
  A a.py

Also check exclude pattern

  $ hg st -aX "*.rs"
  A a.py

issue6335
When a directory containing a tracked file gets symlinked, as of 5.8
`hg st` only gives the correct answer about clean (or deleted) files
if also listing unknowns.
The tree-based dirstate and status algorithm fix this:

#if symlink no-dirstate-v1 rust

  $ cd ..
  $ hg init issue6335
  $ cd issue6335
  $ mkdir foo
  $ touch foo/a
  $ hg ci -Ama
  adding foo/a
  $ mv foo bar
  $ ln -s bar foo
  $ hg status
  ! foo/a
  ? bar/a
  ? foo

  $ hg status -c  # incorrect output without the Rust implementation
  $ hg status -cu
  ? bar/a
  ? foo
  $ hg status -d  # incorrect output without the Rust implementation
  ! foo/a
  $ hg status -du
  ! foo/a
  ? bar/a
  ? foo

#endif


Create a repo with files in each possible status

  $ cd ..
  $ hg init repo7
  $ cd repo7
  $ mkdir subdir
  $ touch clean modified deleted removed
  $ touch subdir/clean subdir/modified subdir/deleted subdir/removed
  $ echo ignored > .hgignore
  $ hg ci -Aqm '#0'
  $ echo 1 > modified
  $ echo 1 > subdir/modified
  $ rm deleted
  $ rm subdir/deleted
  $ hg rm removed
  $ hg rm subdir/removed
  $ touch unknown ignored
  $ touch subdir/unknown subdir/ignored

Check the output

  $ hg status
  M modified
  M subdir/modified
  R removed
  R subdir/removed
  ! deleted
  ! subdir/deleted
  ? subdir/unknown
  ? unknown

  $ hg status -mard
  M modified
  M subdir/modified
  R removed
  R subdir/removed
  ! deleted
  ! subdir/deleted

  $ hg status -A
  M modified
  M subdir/modified
  R removed
  R subdir/removed
  ! deleted
  ! subdir/deleted
  ? subdir/unknown
  ? unknown
  I ignored
  I subdir/ignored
  C .hgignore
  C clean
  C subdir/clean

Note: `hg status some-name` creates a patternmatcher which is not supported
yet by the Rust implementation of status, but includematcher is supported.
--include is used below for that reason

#if unix-permissions

Not having permission to read a directory that contains tracked files makes
status emit a warning then behave as if the directory was empty or removed
entirely:

  $ chmod 0 subdir
  $ hg status --include subdir
  subdir: Permission denied
  R subdir/removed
  ! subdir/clean
  ! subdir/deleted
  ! subdir/modified
  $ chmod 755 subdir

#endif

Remove a directory that contains tracked files

  $ rm -r subdir
  $ hg status --include subdir
  R subdir/removed
  ! subdir/clean
  ! subdir/deleted
  ! subdir/modified

… and replace it by a file

  $ touch subdir
  $ hg status --include subdir
  R subdir/removed
  ! subdir/clean
  ! subdir/deleted
  ! subdir/modified
  ? subdir

Replaced a deleted or removed file with a directory

  $ mkdir deleted removed
  $ touch deleted/1 removed/1
  $ hg status --include deleted --include removed
  R removed
  ! deleted
  ? deleted/1
  ? removed/1
  $ hg add removed/1
  $ hg status --include deleted --include removed
  A removed/1
  R removed
  ! deleted
  ? deleted/1

Deeply nested files in an ignored directory are still listed on request

  $ echo ignored-dir >> .hgignore
  $ mkdir ignored-dir
  $ mkdir ignored-dir/subdir
  $ touch ignored-dir/subdir/1
  $ hg status --ignored
  I ignored
  I ignored-dir/subdir/1

Check using include flag while listing ignored composes correctly (issue6514)

  $ cd ..
  $ hg init issue6514
  $ cd issue6514
  $ mkdir ignored-folder
  $ touch A.hs B.hs C.hs ignored-folder/other.txt ignored-folder/ctest.hs
  $ cat >.hgignore <<EOF
  > A.hs
  > B.hs
  > ignored-folder/
  > EOF
  $ hg st -i -I 're:.*\.hs$'
  I A.hs
  I B.hs
  I ignored-folder/ctest.hs

#if rust dirstate-v2

Check read_dir caching

  $ cd ..
  $ hg init repo8
  $ cd repo8
  $ mkdir subdir
  $ touch subdir/a subdir/b
  $ hg ci -Aqm '#0'

The cached mtime is initially unset

  $ hg debugdirstate --all --no-dates | grep '^ '
      0         -1 unset               subdir

It is still not set when there are unknown files

  $ touch subdir/unknown
  $ hg status
  ? subdir/unknown
  $ hg debugdirstate --all --no-dates | grep '^ '
      0         -1 unset               subdir

Now the directory is eligible for caching, so its mtime is save in the dirstate

  $ rm subdir/unknown
  $ sleep 0.1 # ensure the kernel’s internal clock for mtimes has ticked
  $ hg status
  $ hg debugdirstate --all --no-dates | grep '^ '
      0         -1 set                 subdir

This time the command should be ever so slightly faster since it does not need `read_dir("subdir")`

  $ hg status

Creating a new file changes the directory’s mtime, invalidating the cache

  $ touch subdir/unknown
  $ hg status
  ? subdir/unknown

  $ rm subdir/unknown
  $ hg status

Removing a node from the dirstate resets the cache for its parent directory

  $ hg forget subdir/a
  $ hg debugdirstate --all --no-dates | grep '^ '
      0         -1 set                 subdir
  $ hg ci -qm '#1'
  $ hg debugdirstate --all --no-dates | grep '^ '
      0         -1 unset               subdir
  $ hg status
  ? subdir/a

#endif