annotate tests/test-subrepo-relative-path.t @ 38526:313a940d49a3

ui: add an uninterruptable context manager that can block SIGINT

The blocking of SIGINT is not done by default, but my hope is that we
will one day. This was inspired by Facebook's "nointerrupt" extension,
which is a bit more heavy-handed than this (whole commands are treated
as unsafe to interrupt). A future patch will enable this for varying
bits of Mercurial that are performing unsafe operations.

It's intentional that the KeyboardInterrupt is raised as the context
manager exits: during the span of the context manager interrupting
Mercurial could lead to data loss, but typically those spans are
fairly narrow, so we can let the unsafe block complete and then
terminate hg (which will leave the repo in a consistent state, even if
it's not the user's desired state).

.. api::

   New context manager ``ui.uninterruptable()`` to mark portions of a command
   as potentially unsafe places to interrupt Mercurial with Control-C or
   similar.

Differential Revision: https://phab.mercurial-scm.org/D3716

Preparing the subrepository 'sub'

  $ hg init sub
  $ echo sub > sub/sub
  $ hg add -R sub
  adding sub/sub
  $ hg commit -R sub -m "sub import"

Preparing the 'main' repo which depends on the subrepo 'sub'

  $ hg init main
  $ echo main > main/main
  $ echo "sub = ../sub" > main/.hgsub
  $ hg clone sub main/sub
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg add -R main
  adding main/.hgsub
  adding main/main
  $ hg commit -R main -m "main import"

Cleaning both repositories, just as a clone -U

  $ hg up -C -R sub null
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg up -C -R main null
  0 files updated, 0 files merged, 3 files removed, 0 files unresolved
  $ rm -rf main/sub

hide outer repo
  $ hg init

Serving them both using hgweb

  $ printf '[paths]\n/main = main\nsub = sub\n' > webdir.conf
  $ hg serve --webdir-conf webdir.conf -a localhost -p $HGPORT \
  >    -A /dev/null -E /dev/null --pid-file hg.pid -d
  $ cat hg.pid >> $DAEMON_PIDS

Clone main from hgweb

  $ hg clone "http://localhost:$HGPORT/main" cloned
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 3 changes to 3 files
  new changesets fdfeeb3e979e
  updating to branch default
  cloning subrepo sub from http://localhost:$HGPORT/sub
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 863c1745b441
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved

Ensure that subrepos pay attention to default:pushurl

  $ cat > cloned/.hg/hgrc << EOF
  > [paths]
  > default:pushurl = http://localhost:$HGPORT/main
  > EOF

  $ hg -R cloned out -S --config paths.default=bogus://invalid
  comparing with http://localhost:$HGPORT/main
  searching for changes
  no changes found
  comparing with http://localhost:$HGPORT/sub
  searching for changes
  no changes found
  [1]

  $ hg -R cloned push --config paths.default=bogus://invalid
  pushing to http://localhost:$HGPORT/main
  no changes made to subrepo sub since last push to http://localhost:$HGPORT/sub
  searching for changes
  no changes found
  abort: HTTP Error 403: ssl required
  [255]

Checking cloned repo ids

  $ hg id -R cloned
  fdfeeb3e979e tip
  $ hg id -R cloned/sub
  863c1745b441 tip

subrepo debug for 'main' clone

  $ hg debugsub -R cloned
  path sub
   source   ../sub
   revision 863c1745b441bd97a8c4a096e87793073f4fb215

Test sharing with a remote URL reference

  $ hg init absolute_subrepo
  $ cd absolute_subrepo
  $ echo foo > foo.txt
  $ hg ci -Am 'initial commit'
  adding foo.txt
  $ echo "sub = http://localhost:$HGPORT/sub" > .hgsub
  $ hg ci -Am 'add absolute subrepo'
  adding .hgsub
  $ cd ..

Clone pooling works for local clones with a remote subrepo reference.  The
subrepo is cloned to the pool and shared from there, so that all clones will
share the same subrepo.

  $ hg --config extensions.share= --config share.pool=$TESTTMP/pool \
  >    clone absolute_subrepo cloned_from_abs
  (sharing from new pooled repository 8d6a2f1e993b34b6557de0042cfe825ae12a8dae)
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 3 changes to 3 files
  new changesets 8d6a2f1e993b:* (glob)
  searching for changes
  no changes found
  updating working directory
  cloning subrepo sub from http://localhost:$HGPORT/sub
  (sharing from new pooled repository 863c1745b441bd97a8c4a096e87793073f4fb215)
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 863c1745b441
  searching for changes
  no changes found
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved

Vanilla sharing with a subrepo remote path reference will clone the subrepo.
Each share of these top level repos will end up with independent subrepo copies
(potentially leaving the shared parent with dangling cset references).

  $ hg --config extensions.share= share absolute_subrepo shared_from_abs
  updating working directory
  cloning subrepo sub from http://localhost:$HGPORT/sub
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 863c1745b441
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg --config extensions.share= share -U absolute_subrepo shared_from_abs2
  $ hg -R shared_from_abs2 update -r tip
  cloning subrepo sub from http://localhost:$HGPORT/sub
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 863c1745b441
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved

A parent repo without its subrepo available locally can be shared if the
subrepo is referenced by absolute path.

  $ hg clone -U absolute_subrepo cloned_null_from_abs
  $ hg --config extensions.share= share cloned_null_from_abs shared_from_null_abs
  updating working directory
  cloning subrepo sub from http://localhost:$HGPORT/sub
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 863c1745b441
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ killdaemons.py

subrepo paths with ssh urls

  $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/cloned sshclone
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 3 changes to 3 files
  new changesets fdfeeb3e979e
  updating to branch default
  cloning subrepo sub from ssh://user@dummy/sub
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 863c1745b441
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg -R sshclone push -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/`pwd`/cloned
  pushing to ssh://user@dummy/$TESTTMP/cloned
  pushing subrepo sub to ssh://user@dummy/$TESTTMP/sub
  searching for changes
  no changes found
  searching for changes
  no changes found
  [1]

  $ cat dummylog
  Got arguments 1:user@dummy 2:hg -R cloned serve --stdio
  Got arguments 1:user@dummy 2:hg -R sub serve --stdio
  Got arguments 1:user@dummy 2:hg -R $TESTTMP/cloned serve --stdio
  Got arguments 1:user@dummy 2:hg -R $TESTTMP/sub serve --stdio