tests/test-clonebundles.t

worker: avoid potential partial write of pickled data

Previously, the code wrote the pickled data using os.write(). However,
os.write() can write less bytes than passed to it. To trigger the problem, the
pickled data had to be larger than 2147479552 bytes on my system.

Instead, open a file object and pass it to pickle.dump(). This also has the
advantage that it doesn’t buffer the whole pickled data in memory.

Note that the opened file must be buffered because pickle doesn’t support
unbuffered streams because unbuffered streams’ write() method might write less
bytes than passed to it (like os.write()) but pickle.dump() relies on that all
bytes are written (see https://github.com/python/cpython/issues/93050).

The side effect of using a file object and a with statement is that wfd is
explicitly closed now while it seems like before it was implicitly closed by
process exit.

#require no-reposimplestore no-chg

Set up a server

  $ hg init server
  $ cd server
  $ cat >> .hg/hgrc << EOF
  > [extensions]
  > clonebundles =
  > EOF

  $ touch foo
  $ hg -q commit -A -m 'add foo'
  $ touch bar
  $ hg -q commit -A -m 'add bar'

  $ hg serve -d -p $HGPORT --pid-file hg.pid --accesslog access.log
  $ cat hg.pid >> $DAEMON_PIDS
  $ cd ..

Missing manifest should not result in server lookup

  $ hg --verbose clone -U http://localhost:$HGPORT no-manifest
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  new changesets 53245c60e682:aaff8d2ffbbf
  (sent 3 HTTP requests and * bytes; received * bytes in responses) (glob)

  $ cat server/access.log
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=aaff8d2ffbbf07a46dd1f05d8ae7877e3f56e2a2&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)

Empty manifest file results in retrieval
(the extension only checks if the manifest file exists)

  $ touch server/.hg/clonebundles.manifest
  $ hg --verbose clone -U http://localhost:$HGPORT empty-manifest
  no clone bundles available on remote; falling back to regular clone
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  new changesets 53245c60e682:aaff8d2ffbbf
  (sent 4 HTTP requests and * bytes; received * bytes in responses) (glob)

Manifest file with invalid URL aborts

  $ echo 'http://does.not.exist/bundle.hg' > server/.hg/clonebundles.manifest
  $ hg clone http://localhost:$HGPORT 404-url
  applying clone bundle from http://does.not.exist/bundle.hg
  error fetching bundle: (.* not known|(\[Errno -?\d+] )?([Nn]o address associated with (host)?name|Temporary failure in name resolution|Name does not resolve)) (re) (no-windows !)
  error fetching bundle: [Errno 1100*] getaddrinfo failed (glob) (windows !)
  abort: error applying bundle
  (if this error persists, consider contacting the server operator or disable clone bundles via "--config ui.clonebundles=false")
  [255]

Server is not running aborts

  $ echo "http://localhost:$HGPORT1/bundle.hg" > server/.hg/clonebundles.manifest
  $ hg clone http://localhost:$HGPORT server-not-runner
  applying clone bundle from http://localhost:$HGPORT1/bundle.hg
  error fetching bundle: (.* refused.*|Protocol not supported|(.* )?\$EADDRNOTAVAIL\$|.* No route to host) (re)
  abort: error applying bundle
  (if this error persists, consider contacting the server operator or disable clone bundles via "--config ui.clonebundles=false")
  [255]

Server returns 404

  $ "$PYTHON" $TESTDIR/dumbhttp.py -p $HGPORT1 --pid http.pid
  $ cat http.pid >> $DAEMON_PIDS
  $ hg clone http://localhost:$HGPORT running-404
  applying clone bundle from http://localhost:$HGPORT1/bundle.hg
  HTTP error fetching bundle: HTTP Error 404: File not found
  abort: error applying bundle
  (if this error persists, consider contacting the server operator or disable clone bundles via "--config ui.clonebundles=false")
  [255]

We can override failure to fall back to regular clone

  $ hg --config ui.clonebundlefallback=true clone -U http://localhost:$HGPORT 404-fallback
  applying clone bundle from http://localhost:$HGPORT1/bundle.hg
  HTTP error fetching bundle: HTTP Error 404: File not found
  falling back to normal clone
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  new changesets 53245c60e682:aaff8d2ffbbf

Bundle with partial content works

  $ hg -R server bundle --type gzip-v1 --base null -r 53245c60e682 partial.hg
  1 changesets found

We verify exact bundle content as an extra check against accidental future
changes. If this output changes, we could break old clients.

  $ f --size --hexdump partial.hg
  partial.hg: size=207
  0000: 48 47 31 30 47 5a 78 9c 63 60 60 98 17 ac 12 93 |HG10GZx.c``.....|
  0010: f0 ac a9 23 45 70 cb bf 0d 5f 59 4e 4a 7f 79 21 |...#Ep..._YNJ.y!|
  0020: 9b cc 40 24 20 a0 d7 ce 2c d1 38 25 cd 24 25 d5 |..@$ ...,.8%.$%.|
  0030: d8 c2 22 cd 38 d9 24 cd 22 d5 c8 22 cd 24 cd 32 |..".8.$."..".$.2|
  0040: d1 c2 d0 c4 c8 d2 32 d1 38 39 29 c9 34 cd d4 80 |......2.89).4...|
  0050: ab 24 b5 b8 84 cb 40 c1 80 2b 2d 3f 9f 8b 2b 31 |.$....@..+-?..+1|
  0060: 25 45 01 c8 80 9a d2 9b 65 fb e5 9e 45 bf 8d 7f |%E......e...E...|
  0070: 9f c6 97 9f 2b 44 34 67 d9 ec 8e 0f a0 92 0b 75 |....+D4g.......u|
  0080: 41 d6 24 59 18 a4 a4 9a a6 18 1a 5b 98 9b 5a 98 |A.$Y.......[..Z.|
  0090: 9a 18 26 9b a6 19 98 1a 99 99 26 a6 18 9a 98 24 |..&.......&....$|
  00a0: 26 59 a6 25 5a 98 a5 18 a6 24 71 41 35 b1 43 dc |&Y.%Z....$qA5.C.|
  00b0: 16 b2 83 f7 e9 45 8b d2 56 c7 a3 1f 82 52 d7 8a |.....E..V....R..|
  00c0: 78 ed fc d5 76 f1 36 35 dc 05 00 36 ed 5e c7    |x...v.65...6.^.|

  $ echo "http://localhost:$HGPORT1/partial.hg" > server/.hg/clonebundles.manifest
  $ hg clone -U http://localhost:$HGPORT partial-bundle
  applying clone bundle from http://localhost:$HGPORT1/partial.hg
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  finished applying clone bundle
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets aaff8d2ffbbf
  1 local changesets published

Incremental pull doesn't fetch bundle

  $ hg clone -r 53245c60e682 -U http://localhost:$HGPORT partial-clone
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 53245c60e682

  $ cd partial-clone
  $ hg pull
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets aaff8d2ffbbf
  (run 'hg update' to get a working copy)
  $ cd ..

Bundle with full content works

  $ hg -R server bundle --type gzip-v2 --base null -r tip full.hg
  2 changesets found

Again, we perform an extra check against bundle content changes. If this content
changes, clone bundles produced by new Mercurial versions may not be readable
by old clients.

  $ f --size --hexdump full.hg
  full.hg: size=442
  0000: 48 47 32 30 00 00 00 0e 43 6f 6d 70 72 65 73 73 |HG20....Compress|
  0010: 69 6f 6e 3d 47 5a 78 9c 63 60 60 d0 e4 76 f6 70 |ion=GZx.c``..v.p|
  0020: f4 73 77 75 0f f2 0f 0d 60 00 02 46 46 76 26 4e |.swu....`..FFv&N|
  0030: c6 b2 d4 a2 e2 cc fc 3c 03 a3 bc a4 e4 8c c4 bc |.......<........|
  0040: f4 d4 62 23 06 06 e6 19 40 f9 4d c1 2a 31 09 cf |..b#....@.M.*1..|
  0050: 9a 3a 52 04 b7 fc db f0 95 e5 a4 f4 97 17 b2 c9 |.:R.............|
  0060: 0c 14 00 02 e6 d9 99 25 1a a7 a4 99 a4 a4 1a 5b |.......%.......[|
  0070: 58 a4 19 27 9b a4 59 a4 1a 59 a4 99 a4 59 26 5a |X..'..Y..Y...Y&Z|
  0080: 18 9a 18 59 5a 26 1a 27 27 25 99 a6 99 1a 70 95 |...YZ&.''%....p.|
  0090: a4 16 97 70 19 28 18 70 a5 e5 e7 73 71 25 a6 a4 |...p.(.p...sq%..|
  00a0: 28 00 19 20 17 af fa df ab ff 7b 3f fb 92 dc 8b |(.. ......{?....|
  00b0: 1f 62 bb 9e b7 d7 d9 87 3d 5a 44 89 2f b0 99 87 |.b......=ZD./...|
  00c0: ec e2 54 63 43 e3 b4 64 43 73 23 33 43 53 0b 63 |..TcC..dCs#3CS.c|
  00d0: d3 14 23 03 a0 fb 2c 2c 0c d3 80 1e 30 49 49 b1 |..#...,,....0II.|
  00e0: 4c 4a 32 48 33 30 b0 34 42 b8 38 29 b1 08 e2 62 |LJ2H30.4B.8)...b|
  00f0: 20 03 6a ca c2 2c db 2f f7 2c fa 6d fc fb 34 be | .j..,./.,.m..4.|
  0100: fc 5c 21 a2 39 cb 66 77 7c 00 0d c3 59 17 14 58 |.\!.9.fw|...Y..X|
  0110: 49 16 06 29 a9 a6 29 86 c6 16 e6 a6 16 a6 26 86 |I..)..).......&.|
  0120: c9 a6 69 06 a6 46 66 a6 89 29 86 26 26 89 49 96 |..i..Ff..).&&.I.|
  0130: 69 89 16 66 29 86 29 49 5c 20 07 3e 16 fe 23 ae |i..f).)I\ .>..#.|
  0140: 26 da 1c ab 10 1f d1 f8 e3 b3 ef cd dd fc 0c 93 |&...............|
  0150: 88 75 34 36 75 04 82 55 17 14 36 a4 38 10 04 d8 |.u46u..U..6.8...|
  0160: 21 01 9a b1 83 f7 e9 45 8b d2 56 c7 a3 1f 82 52 |!......E..V....R|
  0170: d7 8a 78 ed fc d5 76 f1 36 25 81 89 c7 ad ec 90 |..x...v.6%......|
  0180: 54 47 75 2b 89 48 b1 b2 62 c9 89 c9 19 a9 56 45 |TGu+.H..b.....VE|
  0190: a9 65 ba 49 45 89 79 c9 19 ba 60 01 a0 14 23 58 |.e.IE.y...`...#X|
  01a0: 81 35 c8 7d 40 cc 04 e2 a4 a4 a6 25 96 e6 94 60 |.5.}@......%...`|
  01b0: 33 17 5f 54 00 00 d3 1b 0d 4c                   |3._T.....L|

  $ echo "http://localhost:$HGPORT1/full.hg" > server/.hg/clonebundles.manifest
  $ hg clone -U http://localhost:$HGPORT full-bundle
  applying clone bundle from http://localhost:$HGPORT1/full.hg
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  finished applying clone bundle
  searching for changes
  no changes found
  2 local changesets published

Feature works over SSH

  $ hg clone -U ssh://user@dummy/server ssh-full-clone
  applying clone bundle from http://localhost:$HGPORT1/full.hg
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  finished applying clone bundle
  searching for changes
  no changes found
  2 local changesets published

Entry with unknown BUNDLESPEC is filtered and not used

  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://bad.entry1 BUNDLESPEC=UNKNOWN
  > http://bad.entry2 BUNDLESPEC=xz-v1
  > http://bad.entry3 BUNDLESPEC=none-v100
  > http://localhost:$HGPORT1/full.hg BUNDLESPEC=gzip-v2
  > EOF

  $ hg clone -U http://localhost:$HGPORT filter-unknown-type
  applying clone bundle from http://localhost:$HGPORT1/full.hg
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  finished applying clone bundle
  searching for changes
  no changes found
  2 local changesets published

Automatic fallback when all entries are filtered

  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://bad.entry BUNDLESPEC=UNKNOWN
  > EOF

  $ hg clone -U http://localhost:$HGPORT filter-all
  no compatible clone bundles available on server; falling back to regular clone
  (you may want to report this to the server operator)
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  new changesets 53245c60e682:aaff8d2ffbbf

We require a Python version that supports SNI. Therefore, URLs requiring SNI
are not filtered.

  $ cp full.hg sni.hg
  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/sni.hg REQUIRESNI=true
  > http://localhost:$HGPORT1/full.hg
  > EOF

  $ hg clone -U http://localhost:$HGPORT sni-supported
  applying clone bundle from http://localhost:$HGPORT1/sni.hg
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  finished applying clone bundle
  searching for changes
  no changes found
  2 local changesets published

Stream clone bundles are supported

  $ hg -R server debugcreatestreamclonebundle packed.hg
  writing 613 bytes for 4 files
  bundle requirements: generaldelta, revlogv1, sparserevlog (no-rust no-zstd !)
  bundle requirements: generaldelta, revlog-compression-zstd, revlogv1, sparserevlog (no-rust zstd !)
  bundle requirements: generaldelta, revlog-compression-zstd, revlogv1, sparserevlog (rust !)

No bundle spec should work

  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/packed.hg
  > EOF

  $ hg clone -U http://localhost:$HGPORT stream-clone-no-spec
  applying clone bundle from http://localhost:$HGPORT1/packed.hg
  4 files to transfer, 613 bytes of data
  transferred 613 bytes in *.* seconds (*) (glob)
  finished applying clone bundle
  searching for changes
  no changes found

Bundle spec without parameters should work

  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/packed.hg BUNDLESPEC=none-packed1
  > EOF

  $ hg clone -U http://localhost:$HGPORT stream-clone-vanilla-spec
  applying clone bundle from http://localhost:$HGPORT1/packed.hg
  4 files to transfer, 613 bytes of data
  transferred 613 bytes in *.* seconds (*) (glob)
  finished applying clone bundle
  searching for changes
  no changes found

Bundle spec with format requirements should work

  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/packed.hg BUNDLESPEC=none-packed1;requirements%3Drevlogv1
  > EOF

  $ hg clone -U http://localhost:$HGPORT stream-clone-supported-requirements
  applying clone bundle from http://localhost:$HGPORT1/packed.hg
  4 files to transfer, 613 bytes of data
  transferred 613 bytes in *.* seconds (*) (glob)
  finished applying clone bundle
  searching for changes
  no changes found

Stream bundle spec with unknown requirements should be filtered out

  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/packed.hg BUNDLESPEC=none-packed1;requirements%3Drevlogv42
  > EOF

  $ hg clone -U http://localhost:$HGPORT stream-clone-unsupported-requirements
  no compatible clone bundles available on server; falling back to regular clone
  (you may want to report this to the server operator)
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  new changesets 53245c60e682:aaff8d2ffbbf

Set up manifest for testing preferences
(Remember, the TYPE does not have to match reality - the URL is
important)

  $ cp full.hg gz-a.hg
  $ cp full.hg gz-b.hg
  $ cp full.hg bz2-a.hg
  $ cp full.hg bz2-b.hg
  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/gz-a.hg BUNDLESPEC=gzip-v2 extra=a
  > http://localhost:$HGPORT1/bz2-a.hg BUNDLESPEC=bzip2-v2 extra=a
  > http://localhost:$HGPORT1/gz-b.hg BUNDLESPEC=gzip-v2 extra=b
  > http://localhost:$HGPORT1/bz2-b.hg BUNDLESPEC=bzip2-v2 extra=b
  > EOF

Preferring an undefined attribute will take first entry

  $ hg --config ui.clonebundleprefers=foo=bar clone -U http://localhost:$HGPORT prefer-foo
  applying clone bundle from http://localhost:$HGPORT1/gz-a.hg
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  finished applying clone bundle
  searching for changes
  no changes found
  2 local changesets published

Preferring bz2 type will download first entry of that type

  $ hg --config ui.clonebundleprefers=COMPRESSION=bzip2 clone -U http://localhost:$HGPORT prefer-bz
  applying clone bundle from http://localhost:$HGPORT1/bz2-a.hg
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  finished applying clone bundle
  searching for changes
  no changes found
  2 local changesets published

Preferring multiple values of an option works

  $ hg --config ui.clonebundleprefers=COMPRESSION=unknown,COMPRESSION=bzip2 clone -U http://localhost:$HGPORT prefer-multiple-bz
  applying clone bundle from http://localhost:$HGPORT1/bz2-a.hg
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  finished applying clone bundle
  searching for changes
  no changes found
  2 local changesets published

Sorting multiple values should get us back to original first entry

  $ hg --config ui.clonebundleprefers=BUNDLESPEC=unknown,BUNDLESPEC=gzip-v2,BUNDLESPEC=bzip2-v2 clone -U http://localhost:$HGPORT prefer-multiple-gz
  applying clone bundle from http://localhost:$HGPORT1/gz-a.hg
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  finished applying clone bundle
  searching for changes
  no changes found
  2 local changesets published

Preferring multiple attributes has correct order

  $ hg --config ui.clonebundleprefers=extra=b,BUNDLESPEC=bzip2-v2 clone -U http://localhost:$HGPORT prefer-separate-attributes
  applying clone bundle from http://localhost:$HGPORT1/bz2-b.hg
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  finished applying clone bundle
  searching for changes
  no changes found
  2 local changesets published

Test where attribute is missing from some entries

  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/gz-a.hg BUNDLESPEC=gzip-v2
  > http://localhost:$HGPORT1/bz2-a.hg BUNDLESPEC=bzip2-v2
  > http://localhost:$HGPORT1/gz-b.hg BUNDLESPEC=gzip-v2 extra=b
  > http://localhost:$HGPORT1/bz2-b.hg BUNDLESPEC=bzip2-v2 extra=b
  > EOF

  $ hg --config ui.clonebundleprefers=extra=b clone -U http://localhost:$HGPORT prefer-partially-defined-attribute
  applying clone bundle from http://localhost:$HGPORT1/gz-b.hg
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  finished applying clone bundle
  searching for changes
  no changes found
  2 local changesets published

Test a bad attribute list

  $ hg --config ui.clonebundleprefers=bad clone -U http://localhost:$HGPORT bad-input
  abort: invalid ui.clonebundleprefers item: bad
  (each comma separated item should be key=value pairs)
  [255]
  $ hg --config ui.clonebundleprefers=key=val,bad,key2=val2 clone \
  >    -U http://localhost:$HGPORT bad-input
  abort: invalid ui.clonebundleprefers item: bad
  (each comma separated item should be key=value pairs)
  [255]


Test interaction between clone bundles and --stream

A manifest with just a gzip bundle

  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/gz-a.hg BUNDLESPEC=gzip-v2
  > EOF

  $ hg clone -U --stream http://localhost:$HGPORT uncompressed-gzip
  no compatible clone bundles available on server; falling back to regular clone
  (you may want to report this to the server operator)
  streaming all changes
  9 files to transfer, 816 bytes of data
  transferred 816 bytes in * seconds (*) (glob)

A manifest with a stream clone but no BUNDLESPEC

  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/packed.hg
  > EOF

  $ hg clone -U --stream http://localhost:$HGPORT uncompressed-no-bundlespec
  no compatible clone bundles available on server; falling back to regular clone
  (you may want to report this to the server operator)
  streaming all changes
  9 files to transfer, 816 bytes of data
  transferred 816 bytes in * seconds (*) (glob)

A manifest with a gzip bundle and a stream clone

  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/gz-a.hg BUNDLESPEC=gzip-v2
  > http://localhost:$HGPORT1/packed.hg BUNDLESPEC=none-packed1
  > EOF

  $ hg clone -U --stream http://localhost:$HGPORT uncompressed-gzip-packed
  applying clone bundle from http://localhost:$HGPORT1/packed.hg
  4 files to transfer, 613 bytes of data
  transferred 613 bytes in * seconds (*) (glob)
  finished applying clone bundle
  searching for changes
  no changes found

A manifest with a gzip bundle and stream clone with supported requirements

  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/gz-a.hg BUNDLESPEC=gzip-v2
  > http://localhost:$HGPORT1/packed.hg BUNDLESPEC=none-packed1;requirements%3Drevlogv1
  > EOF

  $ hg clone -U --stream http://localhost:$HGPORT uncompressed-gzip-packed-requirements
  applying clone bundle from http://localhost:$HGPORT1/packed.hg
  4 files to transfer, 613 bytes of data
  transferred 613 bytes in * seconds (*) (glob)
  finished applying clone bundle
  searching for changes
  no changes found

A manifest with a gzip bundle and a stream clone with unsupported requirements

  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/gz-a.hg BUNDLESPEC=gzip-v2
  > http://localhost:$HGPORT1/packed.hg BUNDLESPEC=none-packed1;requirements%3Drevlogv42
  > EOF

  $ hg clone -U --stream http://localhost:$HGPORT uncompressed-gzip-packed-unsupported-requirements
  no compatible clone bundles available on server; falling back to regular clone
  (you may want to report this to the server operator)
  streaming all changes
  9 files to transfer, 816 bytes of data
  transferred 816 bytes in * seconds (*) (glob)

Test clone bundle retrieved through bundle2

  $ cat << EOF >> $HGRCPATH
  > [extensions]
  > largefiles=
  > EOF
  $ killdaemons.py
  $ hg -R server serve -d -p $HGPORT --pid-file hg.pid --accesslog access.log
  $ cat hg.pid >> $DAEMON_PIDS

  $ hg -R server debuglfput gz-a.hg
  1f74b3d08286b9b3a16fb3fa185dd29219cbc6ae

  $ cat > server/.hg/clonebundles.manifest << EOF
  > largefile://1f74b3d08286b9b3a16fb3fa185dd29219cbc6ae BUNDLESPEC=gzip-v2
  > EOF

  $ hg clone -U http://localhost:$HGPORT largefile-provided --traceback
  applying clone bundle from largefile://1f74b3d08286b9b3a16fb3fa185dd29219cbc6ae
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  finished applying clone bundle
  searching for changes
  no changes found
  2 local changesets published
  $ killdaemons.py

A manifest with a gzip bundle requiring too much memory for a 16MB system and working
on a 32MB system.

  $ "$PYTHON" $TESTDIR/dumbhttp.py -p $HGPORT1 --pid http.pid
  $ cat http.pid >> $DAEMON_PIDS
  $ hg -R server serve -d -p $HGPORT --pid-file hg.pid --accesslog access.log
  $ cat hg.pid >> $DAEMON_PIDS

  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/gz-a.hg BUNDLESPEC=gzip-v2 REQUIREDRAM=12MB
  > EOF

  $ hg clone -U --debug --config ui.available-memory=16MB http://localhost:$HGPORT gzip-too-large
  using http://localhost:$HGPORT/
  sending capabilities command
  sending clonebundles command
  filtering http://localhost:$HGPORT1/gz-a.hg as it needs more than 2/3 of system memory
  no compatible clone bundles available on server; falling back to regular clone
  (you may want to report this to the server operator)
  query 1; heads
  sending batch command
  requesting all changes
  sending getbundle command
  bundle2-input-bundle: with-transaction
  bundle2-input-part: "changegroup" (params: 1 mandatory 1 advisory) supported
  adding changesets
  add changeset 53245c60e682
  add changeset aaff8d2ffbbf
  adding manifests
  adding file changes
  adding bar revisions
  adding foo revisions
  bundle2-input-part: total payload size 920
  bundle2-input-part: "listkeys" (params: 1 mandatory) supported
  bundle2-input-part: "phase-heads" supported
  bundle2-input-part: total payload size 24
  bundle2-input-bundle: 3 parts total
  checking for updated bookmarks
  updating the branch cache
  added 2 changesets with 2 changes to 2 files
  new changesets 53245c60e682:aaff8d2ffbbf
  calling hook changegroup.lfiles: hgext.largefiles.reposetup.checkrequireslfiles
  updating the branch cache
  (sent 4 HTTP requests and * bytes; received * bytes in responses) (glob)

  $ hg clone -U --debug --config ui.available-memory=32MB http://localhost:$HGPORT gzip-too-large2
  using http://localhost:$HGPORT/
  sending capabilities command
  sending clonebundles command
  applying clone bundle from http://localhost:$HGPORT1/gz-a.hg
  bundle2-input-bundle: 1 params with-transaction
  bundle2-input-part: "changegroup" (params: 1 mandatory 1 advisory) supported
  adding changesets
  add changeset 53245c60e682
  add changeset aaff8d2ffbbf
  adding manifests
  adding file changes
  adding bar revisions
  adding foo revisions
  bundle2-input-part: total payload size 920
  bundle2-input-part: "cache:rev-branch-cache" (advisory) supported
  bundle2-input-part: total payload size 59
  bundle2-input-bundle: 2 parts total
  updating the branch cache
  added 2 changesets with 2 changes to 2 files
  finished applying clone bundle
  query 1; heads
  sending batch command
  searching for changes
  all remote heads known locally
  no changes found
  sending getbundle command
  bundle2-input-bundle: with-transaction
  bundle2-input-part: "listkeys" (params: 1 mandatory) supported
  bundle2-input-part: "phase-heads" supported
  bundle2-input-part: total payload size 24
  bundle2-input-bundle: 2 parts total
  checking for updated bookmarks
  2 local changesets published
  calling hook changegroup.lfiles: hgext.largefiles.reposetup.checkrequireslfiles
  updating the branch cache
  (sent 4 HTTP requests and * bytes; received * bytes in responses) (glob)
  $ killdaemons.py