tests/test-http-proxy.t

stream-clone: avoid opening a revlog in case we do not need it

Opening an revlog has a cost, especially if it is inline as we have to scan the
file and construct an index.

To prevent the associated slowdown, we just do a minimal scan to check that an
inline file is still inline, and simply stream the file without creating a
revlog when we can.

This provides a big boost compared to the previous changeset, even if the full
generation is still penalized by the initial gathering of information.

All benchmarks are run on linux with Python 3.10.7.
# benchmark.name             = hg.exchange.stream.generate
# benchmark.variants.version = v2

### Compared to the previous changesets

We get a large win all across the board!

# mercurial-2018-08-01-zstd-sparse-revlog
before:  0.250694 seconds
after:   0.105986 seconds  (-57.72%)
# pypy-2018-08-01-zstd-sparse-revlog
before:  3.885657 seconds
after:   1.709748 seconds  (-56.00%)
# netbeans-2018-08-01-zstd-sparse-revlog
before: 16.679371 seconds
after:   7.687469 seconds  (-53.91%)
# mozilla-central-2018-08-01-zstd-sparse-revlog
before: 38.575482 seconds
after:  17.520316 seconds  (-54.58%)
# mozilla-try-2019-02-18-zstd-sparse-revlog
before: 81.160994 seconds
after:  37.073753 seconds  (-54.32%)



### Compared to 6.4.3

We are still significantly slower than 6.4.3, the extra time is usually twice
slower than the extra time we observe on the locked section, which is a quite
interesting information.

Except for mercurial-central that is much faster. That discrepancy is not really
explained yet.

# mercurial-2018-08-01-zstd-sparse-revlog
6.4.3:  0.072560 seconds
after:  0.105986 seconds  (+46.07%) (- 0.03 seconds)
# pypy-2018-08-01-zstd-sparse-revlog
6.4.3:  1.211193 seconds
after:  1.709748 seconds  (+41.16%) (-0.45 seconds)
# netbeans-2018-08-01-zstd-sparse-revlog
6.4.3:  4.932843 seconds
after:  7.687469 seconds  (+55.84%) (-2.75 seconds)
# mozilla-central-2018-08-01-zstd-sparse-revlog
6.4.3: 34.012226 seconds
after: 17.520316 seconds  (-48.49%) (-16.49 seconds)
# mozilla-try-2019-02-18-zstd-sparse-revlog
6.4.3: 23.850555 seconds
after: 37.073753 seconds  (+55.44%) (+13.22 seconds)

#require serve

  $ hg init a
  $ cd a
  $ echo a > a
  $ hg ci -Ama -d '1123456789 0'
  adding a
  $ hg serve --config server.uncompressed=True -p $HGPORT -d --pid-file=hg.pid
  $ cat hg.pid >> $DAEMON_PIDS
  $ cd ..
  $ tinyproxy.py $HGPORT1 localhost 2>proxy.log >/dev/null </dev/null &
  $ while [ ! -f proxy.pid ]; do sleep 0; done
  $ cat proxy.pid >> $DAEMON_PIDS

url for proxy, stream

  $ http_proxy=http://localhost:$HGPORT1/ hg --config http_proxy.always=True clone --stream http://localhost:$HGPORT/ b
  streaming all changes
  6 files to transfer, 412 bytes of data (reporevlogstore !)
  4 files to transfer, 330 bytes of data (reposimplestore !)
  transferred * bytes in * seconds (*/sec) (glob)
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd b
  $ hg verify -q
  $ cd ..

url for proxy, pull

  $ http_proxy=http://localhost:$HGPORT1/ hg --config http_proxy.always=True clone http://localhost:$HGPORT/ b-pull
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 83180e7845de
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd b-pull
  $ hg verify -q
  $ cd ..

host:port for proxy

  $ http_proxy=localhost:$HGPORT1 hg clone --config http_proxy.always=True http://localhost:$HGPORT/ c
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 83180e7845de
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

proxy url with user name and password

  $ http_proxy=http://user:passwd@localhost:$HGPORT1 hg clone --config http_proxy.always=True http://localhost:$HGPORT/ d
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 83180e7845de
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

url with user name and password

  $ http_proxy=http://user:passwd@localhost:$HGPORT1 hg clone --config http_proxy.always=True http://user:passwd@localhost:$HGPORT/ e
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 83180e7845de
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

bad host:port for proxy ("Protocol not supported" can happen on
misconfigured hosts)

  $ http_proxy=localhost:$HGPORT2 hg clone --config http_proxy.always=True http://localhost:$HGPORT/ f
  abort: error: (Connection refused|Protocol not supported|.* actively refused it|\$EADDRNOTAVAIL\$|No route to host) (re)
  [100]

do not use the proxy if it is in the no list

  $ http_proxy=localhost:$HGPORT1 hg clone --config http_proxy.no=localhost http://localhost:$HGPORT/ g
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 83180e7845de
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

proxy can't connect to server

  $ http_proxy=http://localhost:$HGPORT1/ hg --config http_proxy.always=True clone http://localhost:$HGPORT2/ h
  abort: HTTP Error 404: Connection refused
  [100]

  $ cat proxy.log
  * - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=0&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&stream=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  * - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  * - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  * - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  * - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  * - - [*] code 404, message Connection refused (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT2/?cmd=capabilities HTTP/1.1" 404 - (glob)