annotate hgext/relink.py @ 26362:3bfc473f4d33

gitweb, monoblue: fix vertical align of spans in .sourcelines

Empty lines in file view could produce an inexplicable margin before the next
line (most noticeable in browsers on webkit/blink engine). That was making
empty lines seem taller than the rest.

Instead of using default vertical align, let's set it to 'top'.

This issue is actually present in paper, and only recently got into gitweb
(2239626369f5) and monoblue (119202d4d7a4). There's a bit more to it in paper,
so that will be dealt with in a future patch.

Recipe to see live: preferably using a webkit/blink browser, such as chromium,
browse a file with empty lines, e.g. https://selenic.com/hg/file/3.5/README#l8
Selecting a block of text that includes empty lines will reveal white "breaks"
in the selection. Highlighted line (#l8) also shows such a break below itself.

# Mercurial extension to provide 'hg relink' command
#
# Copyright (C) 2007 Brendan Cully <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

"""recreates hardlinks between repository clones"""

from mercurial import cmdutil, hg, util
from mercurial.i18n import _
import os, stat

cmdtable = {}
command = cmdutil.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'internal' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'internal'

@command('relink', [], _('[ORIGIN]'))
def relink(ui, repo, origin=None, **opts):
    """recreate hardlinks between two repositories

    When repositories are cloned locally, their data files will be
    hardlinked so that they only use the space of a single repository.

    Unfortunately, subsequent pulls into either repository will break
    hardlinks for any files touched by the new changesets, even if
    both repositories end up pulling the same changes.

    Similarly, passing --rev to "hg clone" will fail to use any
    hardlinks, falling back to a complete copy of the source
    repository.

    This command lets you recreate those hardlinks and reclaim that
    wasted space.

    This repository will be relinked to share space with ORIGIN, which
    must be on the same local disk. If ORIGIN is omitted, looks for
    "default-relink", then "default", in [paths].

    Do not attempt any read operations on this repository while the
    command is running. (Both repositories will be locked against
    writes.)
    """
    if (not util.safehasattr(util, 'samefile') or
        not util.safehasattr(util, 'samedevice')):
        raise util.Abort(_('hardlinks are not supported on this system'))
    src = hg.repository(repo.baseui, ui.expandpath(origin or 'default-relink',
                                          origin or 'default'))
    ui.status(_('relinking %s to %s\n') % (src.store.path, repo.store.path))
    if repo.root == src.root:
        ui.status(_('there is nothing to relink\n'))
        return

    if not util.samedevice(src.store.path, repo.store.path):
        # No point in continuing
        raise util.Abort(_('source and destination are on different devices'))

    locallock = repo.lock()
    try:
        remotelock = src.lock()
        try:
            candidates = sorted(collect(src, ui))
            targets = prune(candidates, src.store.path, repo.store.path, ui)
            do_relink(src.store.path, repo.store.path, targets, ui)
        finally:
            remotelock.release()
    finally:
        locallock.release()

def collect(src, ui):
    seplen = len(os.path.sep)
    candidates = []
    live = len(src['tip'].manifest())
    # Your average repository has some files which were deleted before
    # the tip revision. We account for that by assuming that there are
    # 3 tracked files for every 2 live files as of the tip version of
    # the repository.
    #
    # mozilla-central as of 2010-06-10 had a ratio of just over 7:5.
    total = live * 3 // 2
    src = src.store.path
    pos = 0
    ui.status(_("tip has %d files, estimated total number of files: %s\n")
              % (live, total))
    for dirpath, dirnames, filenames in os.walk(src):
        dirnames.sort()
        relpath = dirpath[len(src) + seplen:]
        for filename in sorted(filenames):
            if filename[-2:] not in ('.d', '.i'):
                continue
            st = os.stat(os.path.join(dirpath, filename))
            if not stat.S_ISREG(st.st_mode):
                continue
            pos += 1
            candidates.append((os.path.join(relpath, filename), st))
            ui.progress(_('collecting'), pos, filename, _('files'), total)

    ui.progress(_('collecting'), None)
    ui.status(_('collected %d candidate storage files\n') % len(candidates))
    return candidates

def prune(candidates, src, dst, ui):
    def linkfilter(src, dst, st):
        try:
            ts = os.stat(dst)
        except OSError:
            # Destination doesn't have this file?
            return False
        if util.samefile(src, dst):
            return False
        if not util.samedevice(src, dst):
            # No point in continuing
            raise util.Abort(
                _('source and destination are on different devices'))
        if st.st_size != ts.st_size:
            return False
        return st

    targets = []
    total = len(candidates)
    pos = 0
    for fn, st in candidates:
        pos += 1
        srcpath = os.path.join(src, fn)
        tgt = os.path.join(dst, fn)
        ts = linkfilter(srcpath, tgt, st)
        if not ts:
            ui.debug('not linkable: %s\n' % fn)
            continue
        targets.append((fn, ts.st_size))
        ui.progress(_('pruning'), pos, fn, _('files'), total)

    ui.progress(_('pruning'), None)
    ui.status(_('pruned down to %d probably relinkable files\n') % len(targets))
    return targets

def do_relink(src, dst, files, ui):
    def relinkfile(src, dst):
        bak = dst + '.bak'
        os.rename(dst, bak)
        try:
            util.oslink(src, dst)
        except OSError:
            os.rename(bak, dst)
            raise
        os.remove(bak)

    CHUNKLEN = 65536
    relinked = 0
    savedbytes = 0

    pos = 0
    total = len(files)
    for f, sz in files:
        pos += 1
        source = os.path.join(src, f)
        tgt = os.path.join(dst, f)
        # Binary mode, so that read() works correctly, especially on Windows
        sfp = file(source, 'rb')
        dfp = file(tgt, 'rb')
        sin = sfp.read(CHUNKLEN)
        while sin:
            din = dfp.read(CHUNKLEN)
            if sin != din:
                break
            sin = sfp.read(CHUNKLEN)
        sfp.close()
        dfp.close()
        if sin:
            ui.debug('not linkable: %s\n' % f)
            continue
        try:
            relinkfile(source, tgt)
            ui.progress(_('relinking'), pos, f, _('files'), total)
            relinked += 1
            savedbytes += sz
        except OSError as inst:
            ui.warn('%s: %s\n' % (tgt, str(inst)))

    ui.progress(_('relinking'), None)

    ui.status(_('relinked %d files (%s reclaimed)\n') %
              (relinked, util.bytecount(savedbytes)))