tests/test-install.t

hgweb: perform all parameter lookup via qsparams

I think I managed to update all call sites using wsgirequest.form
to use parsedrequest.qsparams.

Since behavior of qsparams is to retrieve last value, behavior will
change if a parameter was specified multiple times. But I think this
is acceptable.

I'm not a fan of the `req.req.qsparams` pattern. And some of the
modified code could be written better. But I was aiming for a
straight port with this change. Cleanup can come later.

Differential Revision: https://phab.mercurial-scm.org/D2781

hg debuginstall
  $ hg debuginstall
  checking encoding (ascii)...
  checking Python executable (*) (glob)
  checking Python version (2.*) (glob)
  checking Python lib (*lib*)... (glob)
  checking Python security support (*) (glob)
    TLS 1.2 not supported by Python install; network connections lack modern security (?)
    SNI not supported by Python install; may have connectivity issues with some servers (?)
  checking Mercurial version (*) (glob)
  checking Mercurial custom build (*) (glob)
  checking module policy (*) (glob)
  checking installed modules (*mercurial)... (glob)
  checking registered compression engines (*zlib*) (glob)
  checking available compression engines (*zlib*) (glob)
  checking available compression engines for wire protocol (*zlib*) (glob)
  checking "re2" regexp engine \((available|missing)\) (re)
  checking templates (*mercurial?templates)... (glob)
  checking default template (*mercurial?templates?map-cmdline.default) (glob)
  checking commit editor... (*) (glob)
  checking username (test)
  no problems detected

hg debuginstall JSON
  $ hg debuginstall -Tjson | sed 's|\\\\|\\|g'
  [
   {
    "compengines": ["bz2", "bz2truncated", "none", "zlib"*], (glob)
    "compenginesavail": ["bz2", "bz2truncated", "none", "zlib"*], (glob)
    "compenginesserver": [*"zlib"*], (glob)
    "defaulttemplate": "*mercurial?templates?map-cmdline.default", (glob)
    "defaulttemplateerror": null,
    "defaulttemplatenotfound": "default",
    "editor": "*", (glob)
    "editornotfound": false,
    "encoding": "ascii",
    "encodingerror": null,
    "extensionserror": null, (no-pure !)
    "hgmodulepolicy": "*", (glob)
    "hgmodules": "*mercurial", (glob)
    "hgver": "*", (glob)
    "hgverextra": "*", (glob)
    "problems": 0,
    "pythonexe": "*", (glob)
    "pythonlib": "*", (glob)
    "pythonsecurity": [*], (glob)
    "pythonver": "*.*.*", (glob)
    "re2": (true|false), (re)
    "templatedirs": "*mercurial?templates", (glob)
    "username": "test",
    "usernameerror": null,
    "vinotfound": false
   }
  ]

hg debuginstall with no username
  $ HGUSER= hg debuginstall
  checking encoding (ascii)...
  checking Python executable (*) (glob)
  checking Python version (2.*) (glob)
  checking Python lib (*lib*)... (glob)
  checking Python security support (*) (glob)
    TLS 1.2 not supported by Python install; network connections lack modern security (?)
    SNI not supported by Python install; may have connectivity issues with some servers (?)
  checking Mercurial version (*) (glob)
  checking Mercurial custom build (*) (glob)
  checking module policy (*) (glob)
  checking installed modules (*mercurial)... (glob)
  checking registered compression engines (*zlib*) (glob)
  checking available compression engines (*zlib*) (glob)
  checking available compression engines for wire protocol (*zlib*) (glob)
  checking "re2" regexp engine \((available|missing)\) (re)
  checking templates (*mercurial?templates)... (glob)
  checking default template (*mercurial?templates?map-cmdline.default) (glob)
  checking commit editor... (*) (glob)
  checking username...
   no username supplied
   (specify a username in your configuration file)
  1 problems detected, please check your install!
  [1]

hg debuginstall with invalid encoding
  $ HGENCODING=invalidenc hg debuginstall | grep encoding
  checking encoding (invalidenc)...
   unknown encoding: invalidenc

exception message in JSON

  $ HGENCODING=invalidenc HGUSER= hg debuginstall -Tjson | grep error
    "defaulttemplateerror": null,
    "encodingerror": "unknown encoding: invalidenc",
    "extensionserror": null, (no-pure !)
    "usernameerror": "no username supplied",

path variables are expanded (~ is the same as $TESTTMP)
  $ mkdir tools
  $ touch tools/testeditor.exe
#if execbit
  $ chmod 755 tools/testeditor.exe
#endif
  $ HGEDITOR="~/tools/testeditor.exe" hg debuginstall
  checking encoding (ascii)...
  checking Python executable (*) (glob)
  checking Python version (*) (glob)
  checking Python lib (*lib*)... (glob)
  checking Python security support (*) (glob)
    TLS 1.2 not supported by Python install; network connections lack modern security (?)
    SNI not supported by Python install; may have connectivity issues with some servers (?)
  checking Mercurial version (*) (glob)
  checking Mercurial custom build (*) (glob)
  checking module policy (*) (glob)
  checking installed modules (*mercurial)... (glob)
  checking registered compression engines (*zlib*) (glob)
  checking available compression engines (*zlib*) (glob)
  checking available compression engines for wire protocol (*zlib*) (glob)
  checking "re2" regexp engine \((available|missing)\) (re)
  checking templates (*mercurial?templates)... (glob)
  checking default template (*mercurial?templates?map-cmdline.default) (glob)
  checking commit editor... ($TESTTMP/tools/testeditor.exe)
  checking username (test)
  no problems detected

print out the binary post-shlexsplit in the error message when commit editor is
not found (this is intentionally using backslashes to mimic a windows usecase).
  $ HGEDITOR="c:\foo\bar\baz.exe -y -z" hg debuginstall
  checking encoding (ascii)...
  checking Python executable (*) (glob)
  checking Python version (*) (glob)
  checking Python lib (*lib*)... (glob)
  checking Python security support (*) (glob)
    TLS 1.2 not supported by Python install; network connections lack modern security (?)
    SNI not supported by Python install; may have connectivity issues with some servers (?)
  checking Mercurial version (*) (glob)
  checking Mercurial custom build (*) (glob)
  checking module policy (*) (glob)
  checking installed modules (*mercurial)... (glob)
  checking registered compression engines (*zlib*) (glob)
  checking available compression engines (*zlib*) (glob)
  checking available compression engines for wire protocol (*zlib*) (glob)
  checking "re2" regexp engine \((available|missing)\) (re)
  checking templates (*mercurial?templates)... (glob)
  checking default template (*mercurial?templates?map-cmdline.default) (glob)
  checking commit editor... (c:\foo\bar\baz.exe) (windows !)
   Can't find editor 'c:\foo\bar\baz.exe' in PATH (windows !)
  checking commit editor... (c:foobarbaz.exe) (no-windows !)
   Can't find editor 'c:foobarbaz.exe' in PATH (no-windows !)
   (specify a commit editor in your configuration file)
  checking username (test)
  1 problems detected, please check your install!
  [1]

#if test-repo
  $ . "$TESTDIR/helpers-testrepo.sh"

  $ cat >> wixxml.py << EOF
  > import os, subprocess, sys
  > import xml.etree.ElementTree as ET
  > 
  > # MSYS mangles the path if it expands $TESTDIR
  > testdir = os.environ['TESTDIR']
  > ns = {'wix' : 'http://schemas.microsoft.com/wix/2006/wi'}
  > 
  > def directory(node, relpath):
  >     '''generator of files in the xml node, rooted at relpath'''
  >     dirs = node.findall('./{%(wix)s}Directory' % ns)
  > 
  >     for d in dirs:
  >         for subfile in directory(d, relpath + d.attrib['Name'] + '/'):
  >             yield subfile
  > 
  >     files = node.findall('./{%(wix)s}Component/{%(wix)s}File' % ns)
  > 
  >     for f in files:
  >         yield relpath + f.attrib['Name']
  > 
  > def hgdirectory(relpath):
  >     '''generator of tracked files, rooted at relpath'''
  >     hgdir = "%s/../mercurial" % (testdir)
  >     args = ['hg', '--cwd', hgdir, 'files', relpath]
  >     proc = subprocess.Popen(args, stdout=subprocess.PIPE,
  >                             stderr=subprocess.PIPE)
  >     output = proc.communicate()[0]
  > 
  >     slash = '/'
  >     for line in output.splitlines():
  >         if os.name == 'nt':
  >             yield line.replace(os.sep, slash)
  >         else:
  >             yield line
  > 
  > tracked = [f for f in hgdirectory(sys.argv[1])]
  > 
  > xml = ET.parse("%s/../contrib/wix/%s.wxs" % (testdir, sys.argv[1]))
  > root = xml.getroot()
  > dir = root.find('.//{%(wix)s}DirectoryRef' % ns)
  > 
  > installed = [f for f in directory(dir, '')]
  > 
  > print('Not installed:')
  > for f in sorted(set(tracked) - set(installed)):
  >     print('  %s' % f)
  > 
  > print('Not tracked:')
  > for f in sorted(set(installed) - set(tracked)):
  >     print('  %s' % f)
  > EOF

  $ ( testrepohgenv; $PYTHON wixxml.py help )
  Not installed:
    help/common.txt
    help/hg-ssh.8.txt
    help/hg.1.txt
    help/hgignore.5.txt
    help/hgrc.5.txt
  Not tracked:

  $ ( testrepohgenv; $PYTHON wixxml.py templates )
  Not installed:
  Not tracked:

#endif

#if virtualenv

Verify that Mercurial is installable with pip. Note that this MUST be
the last test in this file, because we do some nasty things to the
shell environment in order to make the virtualenv work reliably.

  $ cd $TESTTMP
Note: --no-site-packages is deprecated, but some places have an
ancient virtualenv from their linux distro or similar and it's not yet
the default for them.
  $ unset PYTHONPATH
  $ $PYTHON -m virtualenv --no-site-packages --never-download installenv >> pip.log
Note: we use this weird path to run pip and hg to avoid platform differences,
since it's bin on most platforms but Scripts on Windows.
  $ ./installenv/*/pip install --no-index $TESTDIR/.. >> pip.log
  $ ./installenv/*/hg debuginstall || cat pip.log
  checking encoding (ascii)...
  checking Python executable (*) (glob)
  checking Python version (2.*) (glob)
  checking Python lib (*)... (glob)
  checking Python security support (*) (glob)
    TLS 1.2 not supported by Python install; network connections lack modern security (?)
    SNI not supported by Python install; may have connectivity issues with some servers (?)
  checking Mercurial version (*) (glob)
  checking Mercurial custom build (*) (glob)
  checking module policy (*) (glob)
  checking installed modules (*/mercurial)... (glob)
  checking registered compression engines (*) (glob)
  checking available compression engines (*) (glob)
  checking available compression engines for wire protocol (*) (glob)
  checking "re2" regexp engine \((available|missing)\) (re)
  checking templates ($TESTTMP/installenv/*/site-packages/mercurial/templates)... (glob)
  checking default template ($TESTTMP/installenv/*/site-packages/mercurial/templates/map-cmdline.default) (glob)
  checking commit editor... (*) (glob)
  checking username (test)
  no problems detected
#endif