tests/test-clonebundles.t

wireproto: separate commands tables for version 1 and 2 commands

We can't easily reuse existing command handlers for version 2
commands because the response types will be different. e.g. many
commands return nodes encoded as hex. Our new wire protocol is
binary safe, so we'll wish to encode nodes as binary.

We /could/ teach each command handler to look at the protocol
handler and change behavior based on the version in use. However,
this would make logic a bit unwieldy over time and would make
it harder to design a unified protocol handler interface. I think
it's better to create a clean break between version 1 and version 2
of commands on the server.

What I imagine happening is we will have separate @wireprotocommand
functions for each protocol generation. Those functions will parse the
request, dispatch to a common function to process it, then generate
the response in its own, transport-specific manner.

This commit establishes a separate table for tracking version 1
commands from version 2 commands. The HTTP server pieces have been
updated to use this new table.

Most commands are marked as both version 1 and version 2, so there is
little practical impact to this change.

A side-effect of this change is we now rely on transport registration
in wireprototypes.TRANSPORTS and certain properties of the protocol
interface. So a test had to be updated to conform.

Differential Revision: https://phab.mercurial-scm.org/D2982

Set up a server

  $ cat >> $HGRCPATH << EOF
  > [format]
  > usegeneraldelta=yes
  > EOF
  $ hg init server
  $ cd server
  $ cat >> .hg/hgrc << EOF
  > [extensions]
  > clonebundles =
  > EOF

  $ touch foo
  $ hg -q commit -A -m 'add foo'
  $ touch bar
  $ hg -q commit -A -m 'add bar'

  $ hg serve -d -p $HGPORT --pid-file hg.pid --accesslog access.log
  $ cat hg.pid >> $DAEMON_PIDS
  $ cd ..

Missing manifest should not result in server lookup

  $ hg --verbose clone -U http://localhost:$HGPORT no-manifest
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  new changesets 53245c60e682:aaff8d2ffbbf

  $ cat server/access.log
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ (glob)
  $LOCALIP - - [$LOGDATE$] "GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=aaff8d2ffbbf07a46dd1f05d8ae7877e3f56e2a2&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ (glob)

Empty manifest file results in retrieval
(the extension only checks if the manifest file exists)

  $ touch server/.hg/clonebundles.manifest
  $ hg --verbose clone -U http://localhost:$HGPORT empty-manifest
  no clone bundles available on remote; falling back to regular clone
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  new changesets 53245c60e682:aaff8d2ffbbf

Manifest file with invalid URL aborts

  $ echo 'http://does.not.exist/bundle.hg' > server/.hg/clonebundles.manifest
  $ hg clone http://localhost:$HGPORT 404-url
  applying clone bundle from http://does.not.exist/bundle.hg
  error fetching bundle: (.* not known|(\[Errno -?\d+])? No address associated with hostname) (re) (no-windows !)
  error fetching bundle: [Errno 11004] getaddrinfo failed (windows !)
  abort: error applying bundle
  (if this error persists, consider contacting the server operator or disable clone bundles via "--config ui.clonebundles=false")
  [255]

Server is not running aborts

  $ echo "http://localhost:$HGPORT1/bundle.hg" > server/.hg/clonebundles.manifest
  $ hg clone http://localhost:$HGPORT server-not-runner
  applying clone bundle from http://localhost:$HGPORT1/bundle.hg
  error fetching bundle: (.* refused.*|Protocol not supported|(.* )?Cannot assign requested address) (re)
  abort: error applying bundle
  (if this error persists, consider contacting the server operator or disable clone bundles via "--config ui.clonebundles=false")
  [255]

Server returns 404

  $ "$PYTHON" $TESTDIR/dumbhttp.py -p $HGPORT1 --pid http.pid
  $ cat http.pid >> $DAEMON_PIDS
  $ hg clone http://localhost:$HGPORT running-404
  applying clone bundle from http://localhost:$HGPORT1/bundle.hg
  HTTP error fetching bundle: HTTP Error 404: File not found
  abort: error applying bundle
  (if this error persists, consider contacting the server operator or disable clone bundles via "--config ui.clonebundles=false")
  [255]

We can override failure to fall back to regular clone

  $ hg --config ui.clonebundlefallback=true clone -U http://localhost:$HGPORT 404-fallback
  applying clone bundle from http://localhost:$HGPORT1/bundle.hg
  HTTP error fetching bundle: HTTP Error 404: File not found
  falling back to normal clone
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  new changesets 53245c60e682:aaff8d2ffbbf

Bundle with partial content works

  $ hg -R server bundle --type gzip-v1 --base null -r 53245c60e682 partial.hg
  1 changesets found

We verify exact bundle content as an extra check against accidental future
changes. If this output changes, we could break old clients.

  $ f --size --hexdump partial.hg
  partial.hg: size=207
  0000: 48 47 31 30 47 5a 78 9c 63 60 60 98 17 ac 12 93 |HG10GZx.c``.....|
  0010: f0 ac a9 23 45 70 cb bf 0d 5f 59 4e 4a 7f 79 21 |...#Ep..._YNJ.y!|
  0020: 9b cc 40 24 20 a0 d7 ce 2c d1 38 25 cd 24 25 d5 |..@$ ...,.8%.$%.|
  0030: d8 c2 22 cd 38 d9 24 cd 22 d5 c8 22 cd 24 cd 32 |..".8.$."..".$.2|
  0040: d1 c2 d0 c4 c8 d2 32 d1 38 39 29 c9 34 cd d4 80 |......2.89).4...|
  0050: ab 24 b5 b8 84 cb 40 c1 80 2b 2d 3f 9f 8b 2b 31 |.$....@..+-?..+1|
  0060: 25 45 01 c8 80 9a d2 9b 65 fb e5 9e 45 bf 8d 7f |%E......e...E...|
  0070: 9f c6 97 9f 2b 44 34 67 d9 ec 8e 0f a0 92 0b 75 |....+D4g.......u|
  0080: 41 d6 24 59 18 a4 a4 9a a6 18 1a 5b 98 9b 5a 98 |A.$Y.......[..Z.|
  0090: 9a 18 26 9b a6 19 98 1a 99 99 26 a6 18 9a 98 24 |..&.......&....$|
  00a0: 26 59 a6 25 5a 98 a5 18 a6 24 71 41 35 b1 43 dc |&Y.%Z....$qA5.C.|
  00b0: 16 b2 83 f7 e9 45 8b d2 56 c7 a3 1f 82 52 d7 8a |.....E..V....R..|
  00c0: 78 ed fc d5 76 f1 36 35 dc 05 00 36 ed 5e c7    |x...v.65...6.^.|

  $ echo "http://localhost:$HGPORT1/partial.hg" > server/.hg/clonebundles.manifest
  $ hg clone -U http://localhost:$HGPORT partial-bundle
  applying clone bundle from http://localhost:$HGPORT1/partial.hg
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  finished applying clone bundle
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets aaff8d2ffbbf

Incremental pull doesn't fetch bundle

  $ hg clone -r 53245c60e682 -U http://localhost:$HGPORT partial-clone
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 53245c60e682

  $ cd partial-clone
  $ hg pull
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets aaff8d2ffbbf
  (run 'hg update' to get a working copy)
  $ cd ..

Bundle with full content works

  $ hg -R server bundle --type gzip-v2 --base null -r tip full.hg
  2 changesets found

Again, we perform an extra check against bundle content changes. If this content
changes, clone bundles produced by new Mercurial versions may not be readable
by old clients.

  $ f --size --hexdump full.hg
  full.hg: size=442
  0000: 48 47 32 30 00 00 00 0e 43 6f 6d 70 72 65 73 73 |HG20....Compress|
  0010: 69 6f 6e 3d 47 5a 78 9c 63 60 60 d0 e4 76 f6 70 |ion=GZx.c``..v.p|
  0020: f4 73 77 75 0f f2 0f 0d 60 00 02 46 46 76 26 4e |.swu....`..FFv&N|
  0030: c6 b2 d4 a2 e2 cc fc 3c 03 a3 bc a4 e4 8c c4 bc |.......<........|
  0040: f4 d4 62 23 06 06 e6 19 40 f9 4d c1 2a 31 09 cf |..b#....@.M.*1..|
  0050: 9a 3a 52 04 b7 fc db f0 95 e5 a4 f4 97 17 b2 c9 |.:R.............|
  0060: 0c 14 00 02 e6 d9 99 25 1a a7 a4 99 a4 a4 1a 5b |.......%.......[|
  0070: 58 a4 19 27 9b a4 59 a4 1a 59 a4 99 a4 59 26 5a |X..'..Y..Y...Y&Z|
  0080: 18 9a 18 59 5a 26 1a 27 27 25 99 a6 99 1a 70 95 |...YZ&.''%....p.|
  0090: a4 16 97 70 19 28 18 70 a5 e5 e7 73 71 25 a6 a4 |...p.(.p...sq%..|
  00a0: 28 00 19 20 17 af fa df ab ff 7b 3f fb 92 dc 8b |(.. ......{?....|
  00b0: 1f 62 bb 9e b7 d7 d9 87 3d 5a 44 89 2f b0 99 87 |.b......=ZD./...|
  00c0: ec e2 54 63 43 e3 b4 64 43 73 23 33 43 53 0b 63 |..TcC..dCs#3CS.c|
  00d0: d3 14 23 03 a0 fb 2c 2c 0c d3 80 1e 30 49 49 b1 |..#...,,....0II.|
  00e0: 4c 4a 32 48 33 30 b0 34 42 b8 38 29 b1 08 e2 62 |LJ2H30.4B.8)...b|
  00f0: 20 03 6a ca c2 2c db 2f f7 2c fa 6d fc fb 34 be | .j..,./.,.m..4.|
  0100: fc 5c 21 a2 39 cb 66 77 7c 00 0d c3 59 17 14 58 |.\!.9.fw|...Y..X|
  0110: 49 16 06 29 a9 a6 29 86 c6 16 e6 a6 16 a6 26 86 |I..)..).......&.|
  0120: c9 a6 69 06 a6 46 66 a6 89 29 86 26 26 89 49 96 |..i..Ff..).&&.I.|
  0130: 69 89 16 66 29 86 29 49 5c 20 07 3e 16 fe 23 ae |i..f).)I\ .>..#.|
  0140: 26 da 1c ab 10 1f d1 f8 e3 b3 ef cd dd fc 0c 93 |&...............|
  0150: 88 75 34 36 75 04 82 55 17 14 36 a4 38 10 04 d8 |.u46u..U..6.8...|
  0160: 21 01 9a b1 83 f7 e9 45 8b d2 56 c7 a3 1f 82 52 |!......E..V....R|
  0170: d7 8a 78 ed fc d5 76 f1 36 25 81 89 c7 ad ec 90 |..x...v.6%......|
  0180: 54 47 75 2b 89 48 b1 b2 62 ce 8e ce 1e ae 56 41 |TGu+.H..b.....VA|
  0190: ae 61 ba 4e 41 8e 7e ce 1e ba 60 01 a0 14 23 58 |.a.NA.~...`...#X|
  01a0: 81 35 c8 7d 40 cc 04 e2 a4 a4 a6 25 96 e6 94 60 |.5.}@......%...`|
  01b0: 33 17 5f 54 00 00 01 1b 0a ec                   |3._T......|

  $ echo "http://localhost:$HGPORT1/full.hg" > server/.hg/clonebundles.manifest
  $ hg clone -U http://localhost:$HGPORT full-bundle
  applying clone bundle from http://localhost:$HGPORT1/full.hg
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  finished applying clone bundle
  searching for changes
  no changes found

Feature works over SSH

  $ hg clone -U -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/server ssh-full-clone
  applying clone bundle from http://localhost:$HGPORT1/full.hg
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  finished applying clone bundle
  searching for changes
  no changes found

Entry with unknown BUNDLESPEC is filtered and not used

  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://bad.entry1 BUNDLESPEC=UNKNOWN
  > http://bad.entry2 BUNDLESPEC=xz-v1
  > http://bad.entry3 BUNDLESPEC=none-v100
  > http://localhost:$HGPORT1/full.hg BUNDLESPEC=gzip-v2
  > EOF

  $ hg clone -U http://localhost:$HGPORT filter-unknown-type
  applying clone bundle from http://localhost:$HGPORT1/full.hg
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  finished applying clone bundle
  searching for changes
  no changes found

Automatic fallback when all entries are filtered

  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://bad.entry BUNDLESPEC=UNKNOWN
  > EOF

  $ hg clone -U http://localhost:$HGPORT filter-all
  no compatible clone bundles available on server; falling back to regular clone
  (you may want to report this to the server operator)
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  new changesets 53245c60e682:aaff8d2ffbbf

URLs requiring SNI are filtered in Python <2.7.9

  $ cp full.hg sni.hg
  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/sni.hg REQUIRESNI=true
  > http://localhost:$HGPORT1/full.hg
  > EOF

#if sslcontext
Python 2.7.9+ support SNI

  $ hg clone -U http://localhost:$HGPORT sni-supported
  applying clone bundle from http://localhost:$HGPORT1/sni.hg
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  finished applying clone bundle
  searching for changes
  no changes found
#else
Python <2.7.9 will filter SNI URLs

  $ hg clone -U http://localhost:$HGPORT sni-unsupported
  applying clone bundle from http://localhost:$HGPORT1/full.hg
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  finished applying clone bundle
  searching for changes
  no changes found
#endif

Stream clone bundles are supported

  $ hg -R server debugcreatestreamclonebundle packed.hg
  writing 613 bytes for 4 files
  bundle requirements: generaldelta, revlogv1

No bundle spec should work

  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/packed.hg
  > EOF

  $ hg clone -U http://localhost:$HGPORT stream-clone-no-spec
  applying clone bundle from http://localhost:$HGPORT1/packed.hg
  4 files to transfer, 613 bytes of data
  transferred 613 bytes in *.* seconds (*) (glob)
  finished applying clone bundle
  searching for changes
  no changes found

Bundle spec without parameters should work

  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/packed.hg BUNDLESPEC=none-packed1
  > EOF

  $ hg clone -U http://localhost:$HGPORT stream-clone-vanilla-spec
  applying clone bundle from http://localhost:$HGPORT1/packed.hg
  4 files to transfer, 613 bytes of data
  transferred 613 bytes in *.* seconds (*) (glob)
  finished applying clone bundle
  searching for changes
  no changes found

Bundle spec with format requirements should work

  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/packed.hg BUNDLESPEC=none-packed1;requirements%3Drevlogv1
  > EOF

  $ hg clone -U http://localhost:$HGPORT stream-clone-supported-requirements
  applying clone bundle from http://localhost:$HGPORT1/packed.hg
  4 files to transfer, 613 bytes of data
  transferred 613 bytes in *.* seconds (*) (glob)
  finished applying clone bundle
  searching for changes
  no changes found

Stream bundle spec with unknown requirements should be filtered out

  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/packed.hg BUNDLESPEC=none-packed1;requirements%3Drevlogv42
  > EOF

  $ hg clone -U http://localhost:$HGPORT stream-clone-unsupported-requirements
  no compatible clone bundles available on server; falling back to regular clone
  (you may want to report this to the server operator)
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  new changesets 53245c60e682:aaff8d2ffbbf

Set up manifest for testing preferences
(Remember, the TYPE does not have to match reality - the URL is
important)

  $ cp full.hg gz-a.hg
  $ cp full.hg gz-b.hg
  $ cp full.hg bz2-a.hg
  $ cp full.hg bz2-b.hg
  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/gz-a.hg BUNDLESPEC=gzip-v2 extra=a
  > http://localhost:$HGPORT1/bz2-a.hg BUNDLESPEC=bzip2-v2 extra=a
  > http://localhost:$HGPORT1/gz-b.hg BUNDLESPEC=gzip-v2 extra=b
  > http://localhost:$HGPORT1/bz2-b.hg BUNDLESPEC=bzip2-v2 extra=b
  > EOF

Preferring an undefined attribute will take first entry

  $ hg --config ui.clonebundleprefers=foo=bar clone -U http://localhost:$HGPORT prefer-foo
  applying clone bundle from http://localhost:$HGPORT1/gz-a.hg
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  finished applying clone bundle
  searching for changes
  no changes found

Preferring bz2 type will download first entry of that type

  $ hg --config ui.clonebundleprefers=COMPRESSION=bzip2 clone -U http://localhost:$HGPORT prefer-bz
  applying clone bundle from http://localhost:$HGPORT1/bz2-a.hg
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  finished applying clone bundle
  searching for changes
  no changes found

Preferring multiple values of an option works

  $ hg --config ui.clonebundleprefers=COMPRESSION=unknown,COMPRESSION=bzip2 clone -U http://localhost:$HGPORT prefer-multiple-bz
  applying clone bundle from http://localhost:$HGPORT1/bz2-a.hg
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  finished applying clone bundle
  searching for changes
  no changes found

Sorting multiple values should get us back to original first entry

  $ hg --config ui.clonebundleprefers=BUNDLESPEC=unknown,BUNDLESPEC=gzip-v2,BUNDLESPEC=bzip2-v2 clone -U http://localhost:$HGPORT prefer-multiple-gz
  applying clone bundle from http://localhost:$HGPORT1/gz-a.hg
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  finished applying clone bundle
  searching for changes
  no changes found

Preferring multiple attributes has correct order

  $ hg --config ui.clonebundleprefers=extra=b,BUNDLESPEC=bzip2-v2 clone -U http://localhost:$HGPORT prefer-separate-attributes
  applying clone bundle from http://localhost:$HGPORT1/bz2-b.hg
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  finished applying clone bundle
  searching for changes
  no changes found

Test where attribute is missing from some entries

  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/gz-a.hg BUNDLESPEC=gzip-v2
  > http://localhost:$HGPORT1/bz2-a.hg BUNDLESPEC=bzip2-v2
  > http://localhost:$HGPORT1/gz-b.hg BUNDLESPEC=gzip-v2 extra=b
  > http://localhost:$HGPORT1/bz2-b.hg BUNDLESPEC=bzip2-v2 extra=b
  > EOF

  $ hg --config ui.clonebundleprefers=extra=b clone -U http://localhost:$HGPORT prefer-partially-defined-attribute
  applying clone bundle from http://localhost:$HGPORT1/gz-b.hg
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  finished applying clone bundle
  searching for changes
  no changes found

Test interaction between clone bundles and --stream

A manifest with just a gzip bundle

  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/gz-a.hg BUNDLESPEC=gzip-v2
  > EOF

  $ hg clone -U --stream http://localhost:$HGPORT uncompressed-gzip
  no compatible clone bundles available on server; falling back to regular clone
  (you may want to report this to the server operator)
  streaming all changes
  4 files to transfer, 613 bytes of data
  transferred 613 bytes in * seconds (*) (glob)
  searching for changes
  no changes found

A manifest with a stream clone but no BUNDLESPEC

  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/packed.hg
  > EOF

  $ hg clone -U --stream http://localhost:$HGPORT uncompressed-no-bundlespec
  no compatible clone bundles available on server; falling back to regular clone
  (you may want to report this to the server operator)
  streaming all changes
  4 files to transfer, 613 bytes of data
  transferred 613 bytes in * seconds (*) (glob)
  searching for changes
  no changes found

A manifest with a gzip bundle and a stream clone

  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/gz-a.hg BUNDLESPEC=gzip-v2
  > http://localhost:$HGPORT1/packed.hg BUNDLESPEC=none-packed1
  > EOF

  $ hg clone -U --stream http://localhost:$HGPORT uncompressed-gzip-packed
  applying clone bundle from http://localhost:$HGPORT1/packed.hg
  4 files to transfer, 613 bytes of data
  transferred 613 bytes in * seconds (*) (glob)
  finished applying clone bundle
  searching for changes
  no changes found

A manifest with a gzip bundle and stream clone with supported requirements

  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/gz-a.hg BUNDLESPEC=gzip-v2
  > http://localhost:$HGPORT1/packed.hg BUNDLESPEC=none-packed1;requirements%3Drevlogv1
  > EOF

  $ hg clone -U --stream http://localhost:$HGPORT uncompressed-gzip-packed-requirements
  applying clone bundle from http://localhost:$HGPORT1/packed.hg
  4 files to transfer, 613 bytes of data
  transferred 613 bytes in * seconds (*) (glob)
  finished applying clone bundle
  searching for changes
  no changes found

A manifest with a gzip bundle and a stream clone with unsupported requirements

  $ cat > server/.hg/clonebundles.manifest << EOF
  > http://localhost:$HGPORT1/gz-a.hg BUNDLESPEC=gzip-v2
  > http://localhost:$HGPORT1/packed.hg BUNDLESPEC=none-packed1;requirements%3Drevlogv42
  > EOF

  $ hg clone -U --stream http://localhost:$HGPORT uncompressed-gzip-packed-unsupported-requirements
  no compatible clone bundles available on server; falling back to regular clone
  (you may want to report this to the server operator)
  streaming all changes
  4 files to transfer, 613 bytes of data
  transferred 613 bytes in * seconds (*) (glob)
  searching for changes
  no changes found

Test clone bundle retrieved through bundle2

  $ cat << EOF >> $HGRCPATH
  > [extensions]
  > largefiles=
  > EOF
  $ killdaemons.py
  $ hg -R server serve -d -p $HGPORT --pid-file hg.pid --accesslog access.log
  $ cat hg.pid >> $DAEMON_PIDS

  $ hg -R server debuglfput gz-a.hg
  14ee2f0b3f1d14aeeb2fe037e09fc295c3cf59f5

  $ cat > server/.hg/clonebundles.manifest << EOF
  > largefile://14ee2f0b3f1d14aeeb2fe037e09fc295c3cf59f5 BUNDLESPEC=gzip-v2
  > EOF

  $ hg clone -U http://localhost:$HGPORT largefile-provided --traceback
  applying clone bundle from largefile://14ee2f0b3f1d14aeeb2fe037e09fc295c3cf59f5
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  finished applying clone bundle
  searching for changes
  no changes found