annotate mercurial/exthelper.py @ 43913:4b7d5d10c45d

exchange: ensure all outgoing subrepo references are present before pushing

We've run into occasional problems with people committing a repo, and then
amending or rebasing in the subrepo.  That makes it so that the revision in the
parent can't be checked out, and the problem gets propagated on push.  Mercurial
already tries to defend against this sort of dangling reference by pushing *all*
subrepo revisions first.  This reuses the checks that trigger warnings in
`hg verify` to bail on the push unless using `--force`.

I thought about putting this on the server side, but at that point, all of the
data has been transferred, only to bail out.  Additionally, SCM Manager hosts
subrepos in a location that isn't nested in the parent, so normal subrepo code
would complain that the subrepo is missing when run on the server.

Because the push command pushes subrepos before calling this exchange code, a
subrepo will be pushed before the parent is verified.  Not great, but no
dangling references are exchanged, so it solves the problem.  This code isn't in
the loop that pushes the subrepos because:

  1) the list of outgoing revisions is needed to limit the scope of the check
  2) the loop only accesses the current revision, and therefore can miss
     subrepos that were dropped in previous commits
  3) this code is called when pushing a subrepo, so the protection is recursive

I'm not sure if there's a cheap check for the list of files in the outgoing
bundle.  If there is, that would provide a fast path to bypass this check for
people not using subrepos (or if no subrepo changes were made).  There's
probably also room for verifying other references like tags.  But since that
doesn't break checkouts, it's much less of a problem.

Differential Revision: https://phab.mercurial-scm.org/D7616

# Copyright 2012 Logilab SA        <[e-mail]>
#                Pierre-Yves David <[e-mail]>
#                Octobus <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

#####################################################################
### Extension helper                                              ###
#####################################################################

from __future__ import absolute_import

from . import (
    commands,
    error,
    extensions,
    pycompat,
    registrar,
)

from hgdemandimport import tracing


class exthelper(object):
    """Helper for modular extension setup

    A single helper should be instantiated for each module of an
    extension, where a command or function needs to be wrapped, or a
    command, extension hook, fileset, revset or template needs to be
    registered.  Helper methods are then used as decorators for
    these various purposes.  If an extension spans multiple modules,
    all helper instances should be merged in the main module.

    All decorators return the original function and may be chained.

    Aside from the helper functions with examples below, several
    registrar method aliases are available for adding commands,
    configitems, filesets, revsets, and templates.  Simply decorate
    the appropriate methods, and assign the corresponding exthelper
    variable to a module level variable of the extension.  The
    extension loading mechanism will handle the rest.

    example::

        # ext.py
        eh = exthelper.exthelper()

        # As needed:
        cmdtable = eh.cmdtable
        configtable = eh.configtable
        filesetpredicate = eh.filesetpredicate
        revsetpredicate = eh.revsetpredicate
        templatekeyword = eh.templatekeyword

        @eh.command('mynewcommand',
            [('r', 'rev', [], _('operate on these revisions'))],
            _('-r REV...'),
            helpcategory=command.CATEGORY_XXX)
        def newcommand(ui, repo, *revs, **opts):
            # implementation goes here

        eh.configitem('experimental', 'foo',
            default=False,
        )

        @eh.filesetpredicate('lfs()')
        def filesetbabar(mctx, x):
            return mctx.predicate(...)

        @eh.revsetpredicate('hidden')
        def revsetbabar(repo, subset, x):
            args = revset.getargs(x, 0, 0, 'babar accept no argument')
            return [r for r in subset if 'babar' in repo[r].description()]

        @eh.templatekeyword('babar')
        def kwbabar(ctx):
            return 'babar'
    """

    def __init__(self):
        self._uipopulatecallables = []
        self._uicallables = []
        self._extcallables = []
        self._repocallables = []
        self._commandwrappers = []
        self._extcommandwrappers = []
        self._functionwrappers = []
        self.cmdtable = {}
        self.command = registrar.command(self.cmdtable)
        self.configtable = {}
        self.configitem = registrar.configitem(self.configtable)
        self.filesetpredicate = registrar.filesetpredicate()
        self.revsetpredicate = registrar.revsetpredicate()
        self.templatekeyword = registrar.templatekeyword()

    def merge(self, other):
        self._uicallables.extend(other._uicallables)
        self._uipopulatecallables.extend(other._uipopulatecallables)
        self._extcallables.extend(other._extcallables)
        self._repocallables.extend(other._repocallables)
        self.filesetpredicate._merge(other.filesetpredicate)
        self.revsetpredicate._merge(other.revsetpredicate)
        self.templatekeyword._merge(other.templatekeyword)
        self._commandwrappers.extend(other._commandwrappers)
        self._extcommandwrappers.extend(other._extcommandwrappers)
        self._functionwrappers.extend(other._functionwrappers)
        self.cmdtable.update(other.cmdtable)
        for section, items in pycompat.iteritems(other.configtable):
            if section in self.configtable:
                self.configtable[section].update(items)
            else:
                self.configtable[section] = items

    def finaluisetup(self, ui):
        """Method to be used as the extension uisetup

        The following operations belong here:

        - Changes to ui.__class__ . The ui object that will be used to run the
          command has not yet been created. Changes made here will affect ui
          objects created after this, and in particular the ui that will be
          passed to runcommand
        - Command wraps (extensions.wrapcommand)
        - Changes that need to be visible to other extensions: because
          initialization occurs in phases (all extensions run uisetup, then all
          run extsetup), a change made here will be visible to other extensions
          during extsetup
        - Monkeypatch or wrap function (extensions.wrapfunction) of dispatch
          module members
        - Setup of pre-* and post-* hooks
        - pushkey setup
        """
        for command, wrapper, opts in self._commandwrappers:
            entry = extensions.wrapcommand(commands.table, command, wrapper)
            if opts:
                for opt in opts:
                    entry[1].append(opt)
        for cont, funcname, wrapper in self._functionwrappers:
            extensions.wrapfunction(cont, funcname, wrapper)
        for c in self._uicallables:
            with tracing.log('finaluisetup: %s', repr(c)):
                c(ui)

    def finaluipopulate(self, ui):
        """Method to be used as the extension uipopulate

        This is called once per ui instance to:

        - Set up additional ui members
        - Update configuration by ``ui.setconfig()``
        - Extend the class dynamically
        """
        for c in self._uipopulatecallables:
            c(ui)

    def finalextsetup(self, ui):
        """Method to be used as a the extension extsetup

        The following operations belong here:

        - Changes depending on the status of other extensions. (if
          extensions.find('mq'))
        - Add a global option to all commands
        """
        knownexts = {}

        for ext, command, wrapper, opts in self._extcommandwrappers:
            if ext not in knownexts:
                try:
                    e = extensions.find(ext)
                except KeyError:
                    # Extension isn't enabled, so don't bother trying to wrap
                    # it.
                    continue
                knownexts[ext] = e.cmdtable
            entry = extensions.wrapcommand(knownexts[ext], command, wrapper)
            if opts:
                for opt in opts:
                    entry[1].append(opt)

        for c in self._extcallables:
            with tracing.log('finalextsetup: %s', repr(c)):
                c(ui)

    def finalreposetup(self, ui, repo):
        """Method to be used as the extension reposetup

        The following operations belong here:

        - All hooks but pre-* and post-*
        - Modify configuration variables
        - Changes to repo.__class__, repo.dirstate.__class__
        """
        for c in self._repocallables:
            with tracing.log('finalreposetup: %s', repr(c)):
                c(ui, repo)

    def uisetup(self, call):
        """Decorated function will be executed during uisetup

        example::

            @eh.uisetup
            def setupbabar(ui):
                print 'this is uisetup!'
        """
        self._uicallables.append(call)
        return call

    def uipopulate(self, call):
        """Decorated function will be executed during uipopulate

        example::

            @eh.uipopulate
            def setupfoo(ui):
                print 'this is uipopulate!'
        """
        self._uipopulatecallables.append(call)
        return call

    def extsetup(self, call):
        """Decorated function will be executed during extsetup

        example::

            @eh.extsetup
            def setupcelestine(ui):
                print 'this is extsetup!'
        """
        self._extcallables.append(call)
        return call

    def reposetup(self, call):
        """Decorated function will be executed during reposetup

        example::

            @eh.reposetup
            def setupzephir(ui, repo):
                print 'this is reposetup!'
        """
        self._repocallables.append(call)
        return call

    def wrapcommand(self, command, extension=None, opts=None):
        """Decorated function is a command wrapper

        The name of the command must be given as the decorator argument.
        The wrapping is installed during `uisetup`.

        If the second option `extension` argument is provided, the wrapping
        will be applied in the extension commandtable. This argument must be a
        string that will be searched using `extension.find` if not found and
        Abort error is raised. If the wrapping applies to an extension, it is
        installed during `extsetup`.

        example::

            @eh.wrapcommand('summary')
            def wrapsummary(orig, ui, repo, *args, **kwargs):
                ui.note('Barry!')
                return orig(ui, repo, *args, **kwargs)

        The `opts` argument allows specifying a list of tuples for additional
        arguments for the command.  See ``mercurial.fancyopts.fancyopts()`` for
        the format of the tuple.

        """
        if opts is None:
            opts = []
        else:
            for opt in opts:
                if not isinstance(opt, tuple):
                    raise error.ProgrammingError(b'opts must be list of tuples')
                if len(opt) not in (4, 5):
                    msg = b'each opt tuple must contain 4 or 5 values'
                    raise error.ProgrammingError(msg)

        def dec(wrapper):
            if extension is None:
                self._commandwrappers.append((command, wrapper, opts))
            else:
                self._extcommandwrappers.append(
                    (extension, command, wrapper, opts)
                )
            return wrapper

        return dec

    def wrapfunction(self, container, funcname):
        """Decorated function is a function wrapper

        This function takes two arguments, the container and the name of the
        function to wrap. The wrapping is performed during `uisetup`.
        (there is no extension support)

        example::

            @eh.function(discovery, 'checkheads')
            def wrapfunction(orig, *args, **kwargs):
                ui.note('His head smashed in and his heart cut out')
                return orig(*args, **kwargs)
        """

        def dec(wrapper):
            self._functionwrappers.append((container, funcname, wrapper))
            return wrapper

        return dec