annotate hgext/blackbox.py @ 31515:527a247f114f

merge: remove unnecessary matcher checks

As part of changing manifest.diff to accept a matcher, a previous patch added
matcher calls to each location in merge.manifestmerge that tested if 'x in mf'
to maintain the same behavior as before. After analyzing it further, this
matcher call isn't needed, and in fact hurts future patches ability to use the
matcher here.

Basically, all these 'if x in mf' checks were checking if a matched file's copy
source was in the matcher as well. This meant if you passed a matcher for just
file foo, it would not return file bar even if foo was a copy of bar. Since
manifestmerge cares about copy information, let's allow all lookups of copy
sources.

We also update one spot with a 'is not None' check, since it wasn't obvious that
the value could sometimes be None before, which broke when we called
matcher(None).

A future patch adds matcher optimizations to manifestmerge which causes this
code path to get covered by existing tests.

# blackbox.py - log repository events to a file for post-mortem debugging
#
# Copyright 2010 Nicolas Dumazet
# Copyright 2013 Facebook, Inc.
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

"""log repository events to a blackbox for debugging

Logs event information to .hg/blackbox.log to help debug and diagnose problems.
The events that get logged can be configured via the blackbox.track config key.

Examples::

  [blackbox]
  track = *
  # dirty is *EXPENSIVE* (slow);
  # each log entry indicates `+` if the repository is dirty, like :hg:`id`.
  dirty = True
  # record the source of log messages
  logsource = True

  [blackbox]
  track = command, commandfinish, commandexception, exthook, pythonhook

  [blackbox]
  track = incoming

  [blackbox]
  # limit the size of a log file
  maxsize = 1.5 MB
  # rotate up to N log files when the current one gets too big
  maxfiles = 3

"""

from __future__ import absolute_import

import errno
import re

from mercurial.i18n import _
from mercurial.node import hex

from mercurial import (
    cmdutil,
    ui as uimod,
    util,
)

cmdtable = {}
command = cmdutil.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'
lastui = None

filehandles = {}

def _openlog(vfs):
    path = vfs.join('blackbox.log')
    if path in filehandles:
        return filehandles[path]
    filehandles[path] = fp = vfs('blackbox.log', 'a')
    return fp

def _closelog(vfs):
    path = vfs.join('blackbox.log')
    fp = filehandles[path]
    del filehandles[path]
    fp.close()

def wrapui(ui):
    class blackboxui(ui.__class__):
        def __init__(self, src=None):
            super(blackboxui, self).__init__(src)
            if src is None:
                self._partialinit()
            else:
                self._bbfp = getattr(src, '_bbfp', None)
                self._bbinlog = False
                self._bbrepo = getattr(src, '_bbrepo', None)
                self._bbvfs = getattr(src, '_bbvfs', None)

        def _partialinit(self):
            if util.safehasattr(self, '_bbvfs'):
                return
            self._bbfp = None
            self._bbinlog = False
            self._bbrepo = None
            self._bbvfs = None

        def copy(self):
            self._partialinit()
            return self.__class__(self)

        @util.propertycache
        def track(self):
            return self.configlist('blackbox', 'track', ['*'])

        def _openlogfile(self):
            def rotate(oldpath, newpath):
                try:
                    self._bbvfs.unlink(newpath)
                except OSError as err:
                    if err.errno != errno.ENOENT:
                        self.debug("warning: cannot remove '%s': %s\n" %
                                   (newpath, err.strerror))
                try:
                    if newpath:
                        self._bbvfs.rename(oldpath, newpath)
                except OSError as err:
                    if err.errno != errno.ENOENT:
                        self.debug("warning: cannot rename '%s' to '%s': %s\n" %
                                   (newpath, oldpath, err.strerror))

            fp = _openlog(self._bbvfs)
            maxsize = self.configbytes('blackbox', 'maxsize', 1048576)
            if maxsize > 0:
                st = self._bbvfs.fstat(fp)
                if st.st_size >= maxsize:
                    path = fp.name
                    _closelog(self._bbvfs)
                    maxfiles = self.configint('blackbox', 'maxfiles', 7)
                    for i in xrange(maxfiles - 1, 1, -1):
                        rotate(oldpath='%s.%d' % (path, i - 1),
                               newpath='%s.%d' % (path, i))
                    rotate(oldpath=path,
                           newpath=maxfiles > 0 and path + '.1')
                    fp = _openlog(self._bbvfs)
            return fp

        def _bbwrite(self, fmt, *args):
            self._bbfp.write(fmt % args)
            self._bbfp.flush()

        def log(self, event, *msg, **opts):
            global lastui
            super(blackboxui, self).log(event, *msg, **opts)
            self._partialinit()

            if not '*' in self.track and not event in self.track:
                return

            if self._bbfp:
                ui = self
            elif self._bbvfs:
                try:
                    self._bbfp = self._openlogfile()
                except (IOError, OSError) as err:
                    self.debug('warning: cannot write to blackbox.log: %s\n' %
                               err.strerror)
                    del self._bbvfs
                    self._bbfp = None
                ui = self
            else:
                # certain ui instances exist outside the context of
                # a repo, so just default to the last blackbox that
                # was seen.
                ui = lastui

            if not ui or not ui._bbfp:
                return
            if not lastui or ui._bbrepo:
                lastui = ui
            if ui._bbinlog:
                # recursion guard
                return
            try:
                ui._bbinlog = True
                date = util.datestr(None, '%Y/%m/%d %H:%M:%S')
                user = util.getuser()
                pid = str(util.getpid())
                formattedmsg = msg[0] % msg[1:]
                rev = '(unknown)'
                changed = ''
                if ui._bbrepo:
                    ctx = ui._bbrepo[None]
                    parents = ctx.parents()
                    rev = ('+'.join([hex(p.node()) for p in parents]))
                    if (ui.configbool('blackbox', 'dirty', False) and (
                        any(ui._bbrepo.status()) or
                        any(ctx.sub(s).dirty() for s in ctx.substate)
                    )):
                        changed = '+'
                if ui.configbool('blackbox', 'logsource', False):
                    src = ' [%s]' % event
                else:
                    src = ''
                try:
                    ui._bbwrite('%s %s @%s%s (%s)%s> %s',
                        date, user, rev, changed, pid, src, formattedmsg)
                except IOError as err:
                    self.debug('warning: cannot write to blackbox.log: %s\n' %
                               err.strerror)
            finally:
                ui._bbinlog = False

        def setrepo(self, repo):
            self._bbfp = None
            self._bbinlog = False
            self._bbrepo = repo
            self._bbvfs = repo.vfs

    ui.__class__ = blackboxui
    uimod.ui = blackboxui

def uisetup(ui):
    wrapui(ui)

def reposetup(ui, repo):
    # During 'hg pull' a httppeer repo is created to represent the remote repo.
    # It doesn't have a .hg directory to put a blackbox in, so we don't do
    # the blackbox setup for it.
    if not repo.local():
        return

    if util.safehasattr(ui, 'setrepo'):
        ui.setrepo(repo)

@command('^blackbox',
    [('l', 'limit', 10, _('the number of events to show')),
    ],
    _('hg blackbox [OPTION]...'))
def blackbox(ui, repo, *revs, **opts):
    '''view the recent repository events
    '''

    if not repo.vfs.exists('blackbox.log'):
        return

    limit = opts.get('limit')
    fp = repo.vfs('blackbox.log', 'r')
    lines = fp.read().split('\n')

    count = 0
    output = []
    for line in reversed(lines):
        if count >= limit:
            break

        # count the commands by matching lines like: 2013/01/23 19:13:36 root>
        if re.match('^\d{4}/\d{2}/\d{2} \d{2}:\d{2}:\d{2} .*> .*', line):
            count += 1
        output.append(line)

    ui.status('\n'.join(reversed(output)))