tests/test-http-proxy.t

includematcher: separate "parents" from "dirs"

A future patch will make use of this separation so that we can make more
intelligent decisions about what to investigate/load when the matcher is in use.

Currently, even with this patch, we typically use the 'visitdir' call to identify if
we can skip some directory, something along the lines of:

    for f in all_items:
        if match.visitdir(f):
           <do stuff>

This can be slower than we'd like if there are a lot of items; it requires N
calls to match.visitdir in the best case.  Commonly, especially with 'narrow',
we have a situation where we do some work for the directory, possibly just
loading it from disk (when using treemanifests) and then check if we should be
interacting with it at all, which can be a huge slowdown in some pathological
cases.

Differential Revision: https://phab.mercurial-scm.org/D4129

#require serve

  $ hg init a
  $ cd a
  $ echo a > a
  $ hg ci -Ama -d '1123456789 0'
  adding a
  $ hg serve --config server.uncompressed=True -p $HGPORT -d --pid-file=hg.pid
  $ cat hg.pid >> $DAEMON_PIDS
  $ cd ..
  $ tinyproxy.py $HGPORT1 localhost 2>proxy.log >/dev/null </dev/null &
  $ while [ ! -f proxy.pid ]; do sleep 0; done
  $ cat proxy.pid >> $DAEMON_PIDS

url for proxy, stream

  $ http_proxy=http://localhost:$HGPORT1/ hg --config http_proxy.always=True clone --stream http://localhost:$HGPORT/ b
  streaming all changes
  3 files to transfer, 303 bytes of data (reporevlogstore !)
  4 files to transfer, 330 bytes of data (reposimplestore !)
  transferred * bytes in * seconds (*/sec) (glob)
  searching for changes
  no changes found
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd b
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 1 changesets, 1 total revisions
  $ cd ..

url for proxy, pull

  $ http_proxy=http://localhost:$HGPORT1/ hg --config http_proxy.always=True clone http://localhost:$HGPORT/ b-pull
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 83180e7845de
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd b-pull
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 1 changesets, 1 total revisions
  $ cd ..

host:port for proxy

  $ http_proxy=localhost:$HGPORT1 hg clone --config http_proxy.always=True http://localhost:$HGPORT/ c
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 83180e7845de
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

proxy url with user name and password

  $ http_proxy=http://user:passwd@localhost:$HGPORT1 hg clone --config http_proxy.always=True http://localhost:$HGPORT/ d
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 83180e7845de
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

url with user name and password

  $ http_proxy=http://user:passwd@localhost:$HGPORT1 hg clone --config http_proxy.always=True http://user:passwd@localhost:$HGPORT/ e
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 83180e7845de
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

bad host:port for proxy ("Protocol not supported" can happen on
misconfigured hosts)

  $ http_proxy=localhost:$HGPORT2 hg clone --config http_proxy.always=True http://localhost:$HGPORT/ f
  abort: error: (Connection refused|Protocol not supported|.* actively refused it|Cannot assign requested address) (re)
  [255]

do not use the proxy if it is in the no list

  $ http_proxy=localhost:$HGPORT1 hg clone --config http_proxy.no=localhost http://localhost:$HGPORT/ g
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 83180e7845de
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat proxy.log
  * - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=branchmap HTTP/1.1" - - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=stream_out HTTP/1.1" - - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D83180e7845de420a1bb46896fd5fe05294f8d629 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=0&common=83180e7845de420a1bb46896fd5fe05294f8d629&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  * - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  * - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  * - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  * - - [*] "GET http://localhost:$HGPORT/?cmd=capabilities HTTP/1.1" - - (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=batch HTTP/1.1" - - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)
  $LOCALIP - - [$LOGDATE$] "GET http://localhost:$HGPORT/?cmd=getbundle HTTP/1.1" - - x-hgarg-1:bookmarks=1&$USUAL_BUNDLE_CAPS$&cg=1&common=0000000000000000000000000000000000000000&heads=83180e7845de420a1bb46896fd5fe05294f8d629&listkeys=bookmarks&phases=1 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (glob)