annotate mercurial/progress.py @ 52119:5ad5f0853a0a stable

wireprototypes: fix exception handling code with a bad pytype suppression

This goes back to f5fcf7123a92, and I suspect it was a misread of the error
message is describes- the LHS of `.sorted()` is always bytes, and bytes didn't
have this method in py2 either.  The invalid names were already handled like
this a few lines above.

PyCharm flagged this, and it stood out after converting the zope interfaces to
Protocol classes (which hasn't been published yet).

# progress.py progress bars related code
#
# Copyright (C) 2010 Augie Fackler <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.


import threading
import time

from .i18n import _
from . import encoding


def spacejoin(*args):
    return b' '.join(s for s in args if s)


def shouldprint(ui):
    return not (ui.quiet or ui.plain(b'progress')) and (
        ui._isatty(ui.ferr) or ui.configbool(b'progress', b'assume-tty')
    )


def fmtremaining(seconds):
    """format a number of remaining seconds in human readable way

    This will properly display seconds, minutes, hours, days if needed"""
    if seconds < 60:
        # i18n: format XX seconds as "XXs"
        return _(b"%02ds") % seconds
    minutes = seconds // 60
    if minutes < 60:
        seconds -= minutes * 60
        # i18n: format X minutes and YY seconds as "XmYYs"
        return _(b"%dm%02ds") % (minutes, seconds)
    # we're going to ignore seconds in this case
    minutes += 1
    hours = minutes // 60
    minutes -= hours * 60
    if hours < 30:
        # i18n: format X hours and YY minutes as "XhYYm"
        return _(b"%dh%02dm") % (hours, minutes)
    # we're going to ignore minutes in this case
    hours += 1
    days = hours // 24
    hours -= days * 24
    if days < 15:
        # i18n: format X days and YY hours as "XdYYh"
        return _(b"%dd%02dh") % (days, hours)
    # we're going to ignore hours in this case
    days += 1
    weeks = days // 7
    days -= weeks * 7
    if weeks < 55:
        # i18n: format X weeks and YY days as "XwYYd"
        return _(b"%dw%02dd") % (weeks, days)
    # we're going to ignore days and treat a year as 52 weeks
    weeks += 1
    years = weeks // 52
    weeks -= years * 52
    # i18n: format X years and YY weeks as "XyYYw"
    return _(b"%dy%02dw") % (years, weeks)


class progbar:
    def __init__(self, ui):
        self.ui = ui
        self._refreshlock = threading.Lock()
        self.resetstate()

    def resetstate(self):
        self.topics = []
        self.topicstates = {}
        self.starttimes = {}
        self.startvals = {}
        self.printed = False
        self.lastprint = time.time() + float(
            self.ui.config(b'progress', b'delay')
        )
        self.curtopic = None
        self.lasttopic = None
        self.indetcount = 0
        self.refresh = float(self.ui.config(b'progress', b'refresh'))
        self.changedelay = max(
            3 * self.refresh, float(self.ui.config(b'progress', b'changedelay'))
        )
        self.order = self.ui.configlist(b'progress', b'format')
        self.estimateinterval = self.ui.configwith(
            float, b'progress', b'estimateinterval'
        )

    def show(self, now, topic, pos, item, unit, total):
        if not shouldprint(self.ui):
            return
        termwidth = self.width()
        self.printed = True
        head = b''
        needprogress = False
        tail = b''
        for indicator in self.order:
            add = b''
            if indicator == b'topic':
                add = topic
            elif indicator == b'number':
                if total:
                    add = b'%*d/%d' % (len(str(total)), pos, total)
                else:
                    add = b'%d' % pos
            elif indicator.startswith(b'item') and item:
                slice = b'end'
                if b'-' in indicator:
                    wid = int(indicator.split(b'-')[1])
                elif b'+' in indicator:
                    slice = b'beginning'
                    wid = int(indicator.split(b'+')[1])
                else:
                    wid = 20
                if slice == b'end':
                    add = encoding.trim(item, wid, leftside=True)
                else:
                    add = encoding.trim(item, wid)
                add += (wid - encoding.colwidth(add)) * b' '
            elif indicator == b'bar':
                add = b''
                needprogress = True
            elif indicator == b'unit' and unit:
                add = unit
            elif indicator == b'estimate':
                add = self.estimate(topic, pos, total, now)
            elif indicator == b'speed':
                add = self.speed(topic, pos, unit, now)
            if not needprogress:
                head = spacejoin(head, add)
            else:
                tail = spacejoin(tail, add)
        if needprogress:
            used = 0
            if head:
                used += encoding.colwidth(head) + 1
            if tail:
                used += encoding.colwidth(tail) + 1
            progwidth = termwidth - used - 3
            if total and pos <= total:
                amt = pos * progwidth // total
                bar = b'=' * (amt - 1)
                if amt > 0:
                    bar += b'>'
                bar += b' ' * (progwidth - amt)
            else:
                progwidth -= 3
                self.indetcount += 1
                # mod the count by twice the width so we can make the
                # cursor bounce between the right and left sides
                amt = self.indetcount % (2 * progwidth)
                amt -= progwidth
                bar = (
                    b' ' * int(progwidth - abs(amt))
                    + b'<=>'
                    + b' ' * int(abs(amt))
                )
            prog = b''.join((b'[', bar, b']'))
            out = spacejoin(head, prog, tail)
        else:
            out = spacejoin(head, tail)
        self._writeerr(b'\r' + encoding.trim(out, termwidth))
        self.lasttopic = topic
        self._flusherr()

    def clear(self):
        if not self.printed or not self.lastprint or not shouldprint(self.ui):
            return
        self._writeerr(b'\r%s\r' % (b' ' * self.width()))
        self._flusherr()
        if self.printed:
            # force immediate re-paint of progress bar
            self.lastprint = 0

    def complete(self):
        if not shouldprint(self.ui):
            return
        if self.ui.configbool(b'progress', b'clear-complete'):
            self.clear()
        else:
            self._writeerr(b'\n')
        self._flusherr()

    def _flusherr(self):
        self.ui.ferr.flush()

    def _writeerr(self, msg):
        self.ui.ferr.write(msg)

    def width(self):
        tw = self.ui.termwidth()
        return min(int(self.ui.config(b'progress', b'width', default=tw)), tw)

    def estimate(self, topic, pos, total, now):
        if total is None:
            return b''
        initialpos = self.startvals[topic]
        target = total - initialpos
        delta = pos - initialpos
        if delta > 0:
            elapsed = now - self.starttimes[topic]
            seconds = (elapsed * (target - delta)) // delta + 1
            return fmtremaining(seconds)
        return b''

    def speed(self, topic, pos, unit, now):
        initialpos = self.startvals[topic]
        delta = pos - initialpos
        elapsed = now - self.starttimes[topic]
        if elapsed > 0:
            return _(b'%d %s/sec') % (delta / elapsed, unit)
        return b''

    def _oktoprint(self, now):
        '''Check if conditions are met to print - e.g. changedelay elapsed'''
        if (
            self.lasttopic is None  # first time we printed
            # not a topic change
            or self.curtopic == self.lasttopic
            # it's been long enough we should print anyway
            or now - self.lastprint >= self.changedelay
        ):
            return True
        else:
            return False

    def _calibrateestimate(self, topic, now, pos):
        """Adjust starttimes and startvals for topic so ETA works better

        If progress is non-linear (ex. get much slower in the last minute),
        it's more friendly to only use a recent time span for ETA and speed
        calculation.

            [======================================>       ]
                                             ^^^^^^^
                           estimateinterval, only use this for estimation
        """
        interval = self.estimateinterval
        if interval <= 0:
            return
        elapsed = now - self.starttimes[topic]
        if elapsed > interval:
            delta = pos - self.startvals[topic]
            newdelta = delta * interval / elapsed
            # If a stall happens temporarily, ETA could change dramatically
            # frequently. This is to avoid such dramatical change and make ETA
            # smoother.
            if newdelta < 0.1:
                return
            self.startvals[topic] = pos - newdelta
            self.starttimes[topic] = now - interval

    def progress(self, topic, pos, item=b'', unit=b'', total=None):
        if pos is None:
            self.closetopic(topic)
            return
        now = time.time()
        with self._refreshlock:
            if topic not in self.topics:
                self.starttimes[topic] = now
                self.startvals[topic] = pos
                self.topics.append(topic)
            self.topicstates[topic] = pos, item, unit, total
            self.curtopic = topic
            self._calibrateestimate(topic, now, pos)
            if now - self.lastprint >= self.refresh and self.topics:
                if self._oktoprint(now):
                    self.lastprint = now
                    self.show(now, topic, *self.topicstates[topic])

    def closetopic(self, topic):
        with self._refreshlock:
            self.starttimes.pop(topic, None)
            self.startvals.pop(topic, None)
            self.topicstates.pop(topic, None)
            # reset the progress bar if this is the outermost topic
            if self.topics and self.topics[0] == topic and self.printed:
                self.complete()
                self.resetstate()
            # truncate the list of topics assuming all topics within
            # this one are also closed
            if topic in self.topics:
                self.topics = self.topics[: self.topics.index(topic)]
                # reset the last topic to the one we just unwound to,
                # so that higher-level topics will be stickier than
                # lower-level topics
                if self.topics:
                    self.lasttopic = self.topics[-1]
                else:
                    self.lasttopic = None