tests/test-convert-cvs-synthetic.t

clfilter: introduce `filteredrevs` attribute on changelog

This changeset allows changelog object to be "filtered". You can assign a set of
revision numbers to the `changelog.filteredrevs` attributes. The changelog will
then pretends these revision does not exists in this repo.

A few methods need to be altered to achieve this behavior:

- tip
- __iter_
- irevs
- hasnode
- headrevs

For consistency and to help debugging, the following methods are altered too.
Tests tend to show it's not necessary to alter them but have them raise proper
exception helps to detect bad acces to filtered revisions.

- rev
- node
- linkrev
- parentrevs
- flags

The following methods would also need alteration for consistency purpose but
this is non-trivial and not done yet.

- nodemap
- strip

The C version of headrevs is not run if there is any revision to filter. It'll
need a proper rewrite later to restore performance.

This feature requires use of builtin cvsps!

  $ "$TESTDIR/hghave" cvs || exit 80
  $ echo "[extensions]" >> $HGRCPATH
  $ echo "convert = " >> $HGRCPATH
  $ echo "graphlog = " >> $HGRCPATH

create cvs repository with one project

  $ mkdir cvsrepo
  $ cd cvsrepo
  $ CVSROOT=`pwd`
  $ export CVSROOT
  $ CVS_OPTIONS=-f
  $ export CVS_OPTIONS
  $ cd ..
  $ cvscall()
  > {
  >     cvs -f "$@"
  > }

output of 'cvs ci' varies unpredictably, so just discard it

  $ cvsci()
  > {
  >     sleep 1
  >     cvs -f ci "$@" >/dev/null
  > }
  $ cvscall -d "$CVSROOT" init
  $ mkdir cvsrepo/proj
  $ cvscall -q co proj

create file1 on the trunk

  $ cd proj
  $ touch file1
  $ cvscall -Q add file1
  $ cvsci -m"add file1 on trunk" file1

create two branches

  $ cvscall -q tag -b v1_0
  T file1
  $ cvscall -q tag -b v1_1
  T file1

create file2 on branch v1_0

  $ cvscall -Q up -rv1_0
  $ touch file2
  $ cvscall -Q add file2
  $ cvsci -m"add file2" file2

create file3, file4 on branch v1_1

  $ cvscall -Q up -rv1_1
  $ touch file3
  $ touch file4
  $ cvscall -Q add file3 file4
  $ cvsci -m"add file3, file4 on branch v1_1" file3 file4

merge file2 from v1_0 to v1_1

  $ cvscall -Q up -jv1_0
  $ cvsci -m"MERGE from v1_0: add file2"
  cvs commit: Examining .

Step things up a notch: now we make the history really hairy, with
changes bouncing back and forth between trunk and v1_2 and merges
going both ways.  (I.e., try to model the real world.)
create branch v1_2

  $ cvscall -Q up -A
  $ cvscall -q tag -b v1_2
  T file1

create file5 on branch v1_2

  $ cvscall -Q up -rv1_2
  $ touch file5
  $ cvs -Q add file5
  $ cvsci -m"add file5 on v1_2"
  cvs commit: Examining .

create file6 on trunk post-v1_2

  $ cvscall -Q up -A
  $ touch file6
  $ cvscall -Q add file6
  $ cvsci -m"add file6 on trunk post-v1_2"
  cvs commit: Examining .

merge file5 from v1_2 to trunk

  $ cvscall -Q up -A
  $ cvscall -Q up -jv1_2 file5
  $ cvsci -m"MERGE from v1_2: add file5"
  cvs commit: Examining .

merge file6 from trunk to v1_2

  $ cvscall -Q up -rv1_2
  $ cvscall up -jHEAD file6
  U file6
  $ cvsci -m"MERGE from HEAD: add file6"
  cvs commit: Examining .

cvs rlog output

  $ cvscall -q rlog proj | egrep '^(RCS file|revision)'
  RCS file: $TESTTMP/cvsrepo/proj/file1,v
  revision 1.1
  RCS file: $TESTTMP/cvsrepo/proj/Attic/file2,v
  revision 1.1
  revision 1.1.4.2
  revision 1.1.4.1
  revision 1.1.2.1
  RCS file: $TESTTMP/cvsrepo/proj/Attic/file3,v
  revision 1.1
  revision 1.1.2.1
  RCS file: $TESTTMP/cvsrepo/proj/Attic/file4,v
  revision 1.1
  revision 1.1.2.1
  RCS file: $TESTTMP/cvsrepo/proj/file5,v
  revision 1.2
  revision 1.1
  revision 1.1.2.1
  RCS file: $TESTTMP/cvsrepo/proj/file6,v
  revision 1.1
  revision 1.1.2.2
  revision 1.1.2.1

convert to hg (#1)

  $ cd ..
  $ hg convert --datesort proj proj.hg
  initializing destination proj.hg repository
  connecting to $TESTTMP/cvsrepo
  scanning source...
  collecting CVS rlog
  15 log entries
  creating changesets
  8 changeset entries
  sorting...
  converting...
  7 add file1 on trunk
  6 add file2
  5 add file3, file4 on branch v1_1
  4 MERGE from v1_0: add file2
  3 add file5 on v1_2
  2 add file6 on trunk post-v1_2
  1 MERGE from v1_2: add file5
  0 MERGE from HEAD: add file6

hg glog output (#1)

  $ hg -R proj.hg glog --template "{rev} {desc}\n"
  o  7 MERGE from HEAD: add file6
  |
  | o  6 MERGE from v1_2: add file5
  | |
  | o  5 add file6 on trunk post-v1_2
  | |
  o |  4 add file5 on v1_2
  |/
  | o  3 MERGE from v1_0: add file2
  | |
  | o  2 add file3, file4 on branch v1_1
  |/
  | o  1 add file2
  |/
  o  0 add file1 on trunk
  

convert to hg (#2: with merge detection)

  $ hg convert \
  >   --config convert.cvsps.mergefrom='"^MERGE from (\S+):"' \
  >   --datesort \
  >   proj proj.hg2
  initializing destination proj.hg2 repository
  connecting to $TESTTMP/cvsrepo
  scanning source...
  collecting CVS rlog
  15 log entries
  creating changesets
  8 changeset entries
  sorting...
  converting...
  7 add file1 on trunk
  6 add file2
  5 add file3, file4 on branch v1_1
  4 MERGE from v1_0: add file2
  3 add file5 on v1_2
  2 add file6 on trunk post-v1_2
  1 MERGE from v1_2: add file5
  0 MERGE from HEAD: add file6

hg glog output (#2)

  $ hg -R proj.hg2 glog --template "{rev} {desc}\n"
  o  7 MERGE from HEAD: add file6
  |
  | o  6 MERGE from v1_2: add file5
  | |
  | o  5 add file6 on trunk post-v1_2
  | |
  o |  4 add file5 on v1_2
  |/
  | o  3 MERGE from v1_0: add file2
  | |
  | o  2 add file3, file4 on branch v1_1
  |/
  | o  1 add file2
  |/
  o  0 add file1 on trunk