annotate Makefile @ 35098:66c5a8cf2868

lfs: import the Facebook git-lfs client extension

The purpose of this is the same as the built-in largefiles extension- to handle
huge files outside of the normal storage system, generally to keep the amount of
data cloned to a lower amount.  There are several benefits of implementing the
git-lfs protocol, instead of using the largefiles extension:

  - Bitbucket and Github support (and probably wider support in 3rd party
    hosting sites in general). [1][2]

  - The number of hg internals monkey patched are several orders of magnitude
    lower, so it will be easier to reason about and maintain.  Future commands
    will likely just work, without requiring various wrappers.

  - The "standin" files are only written to the filelog, not the disk.  That
    should avoid weird edge cases where the largefile and standin files get out
    of sync. [3]  It also avoids the occasional printing of the "hidden" standin
    file in various messages.

  - Filesets like size() will work, even if the file isn't present.  (It always
    says 41 bytes for largefiles, whether present or not.)

The only place that I see where largefiles comes out on top is that it works
with `hg serve` for simple sharing, without external infrastructure.  Getting
lfs-test-server working was a hassle, and took awhile to figure out.  Maybe we
can do something to make it work in the future.

Long term, I expect that this will be highly preferred over largefiles.  But if
we are to recommend this to largefile users, there are some UI issues to
bikeshed.  Until they are resolved, I've marked this experimental, and am not
putting a pointer to this in the largefiles help.  The (non exhaustive) list of
issues I've seen so far are:

  - It isn't sufficient to just enable the largefiles extension- you have to
    explicitly add a file with --large before it will pay attention to the
    configured sizes and patterns on future adds.  The justification being that
    once you use it, you're stuck with it.  I've seen people confused by this,
    and haven't liked it myself.  But it's also saved me a few times.  Should we
    do something like have a specific enabling config setting that must be set
    in the local repo config, so that enabling this extension in the user or
    system hgrc doesn't silently start storing lfs files?

  - The largefiles extension adds a repo requirement when the first largefile is
    committed, so that the extension must always be enabled in the future.  This
    extension is not doing that, and since I only enabled it locally to avoid
    infecting other repos, I got a cryptic error about missing flag processors
    when I cloned.  Is there no repo requirement due to shallow/narrow clone
    considerations (or other future advanced things)?

  - In the (small amount of) reading I've done about the git implementation, it
    seems that the files and sizes are stored in a tracked .gitattributes file.
    I think a tracked file for this would be extremely useful for consistency
    across developers, but this kind of touches on the tracked hgrc file
    proposal a few months back.

  - The git client can specify file patterns, not just sizes.

  - The largefiles extension has a cache directory in the local repo, but also a
    system wide one.  We should probably implement a system wide cache too, so
    that multiple clones don't have to refetch the files from the server.

  - Jun mentioned other missing features, like SSH authentication, gc, etc.

The code corresponds to c0492b73c7ef in hg-experimental. [4]  The only tweaks
are to load the extension in the tests with 'lfs=' instead of
'lfs=$TESTDIR/../hgext3rd/lfs', change the import in the *.py test to hgext
(from hgext3rd), add the 'testedwith' declaration, and mark it experimental for
now.  The infinite-push, p4fastimport, and remotefilelog tests were left behind.

The devel-warnings for unregistered config options are not corrected yet, nor
are the import check warnings.

[1] https://www.mercurial-scm.org/pipermail/mercurial/2017-November/050699.html
[2] https://bitbucket.org/site/master/issues/3843/largefiles-support-bb-3903
[3] https://bz.mercurial-scm.org/show_bug.cgi?id=5738
[4] https://bitbucket.org/facebook/hg-experimental

# If you want to change PREFIX, do not just edit it below. The changed
# value wont get passed on to recursive make calls. You should instead
# override the variable on the command like:
#
# % make PREFIX=/opt/ install

export PREFIX=/usr/local
PYTHON=python
$(eval HGROOT := $(shell pwd))
HGPYTHONS ?= $(HGROOT)/build/pythons
PURE=
PYFILES:=$(shell find mercurial hgext doc -name '*.py')
DOCFILES=mercurial/help/*.txt
export LANGUAGE=C
export LC_ALL=C
TESTFLAGS ?= $(shell echo $$HGTESTFLAGS)
OSXVERSIONFLAGS ?= $(shell echo $$OSXVERSIONFLAGS)

# Set this to e.g. "mingw32" to use a non-default compiler.
COMPILER=

COMPILERFLAG_tmp_ =
COMPILERFLAG_tmp_${COMPILER} ?= -c $(COMPILER)
COMPILERFLAG=${COMPILERFLAG_tmp_${COMPILER}}

help:
	@echo 'Commonly used make targets:'
	@echo '  all          - build program and documentation'
	@echo '  install      - install program and man pages to $$PREFIX ($(PREFIX))'
	@echo '  install-home - install with setup.py install --home=$$HOME ($(HOME))'
	@echo '  local        - build for inplace usage'
	@echo '  tests        - run all tests in the automatic test suite'
	@echo '  test-foo     - run only specified tests (e.g. test-merge1.t)'
	@echo '  dist         - run all tests and create a source tarball in dist/'
	@echo '  clean        - remove files created by other targets'
	@echo '                 (except installed files or dist source tarball)'
	@echo '  update-pot   - update i18n/hg.pot'
	@echo
	@echo 'Example for a system-wide installation under /usr/local:'
	@echo '  make all && su -c "make install" && hg version'
	@echo
	@echo 'Example for a local installation (usable in this directory):'
	@echo '  make local && ./hg version'

all: build doc

local:
	$(PYTHON) setup.py $(PURE) \
	  build_py -c -d . \
	  build_ext $(COMPILERFLAG) -i \
	  build_hgexe $(COMPILERFLAG) -i \
	  build_mo
	env HGRCPATH= $(PYTHON) hg version

build:
	$(PYTHON) setup.py $(PURE) build $(COMPILERFLAG)

wheel:
	FORCE_SETUPTOOLS=1 $(PYTHON) setup.py $(PURE) bdist_wheel $(COMPILERFLAG)

doc:
	$(MAKE) -C doc

cleanbutpackages:
	-$(PYTHON) setup.py clean --all # ignore errors from this command
	find contrib doc hgext hgext3rd i18n mercurial tests hgdemandimport \
		\( -name '*.py[cdo]' -o -name '*.so' \) -exec rm -f '{}' ';'
	rm -f MANIFEST MANIFEST.in hgext/__index__.py tests/*.err
	rm -f mercurial/__modulepolicy__.py
	if test -d .hg; then rm -f mercurial/__version__.py; fi
	rm -rf build mercurial/locale
	$(MAKE) -C doc clean
	$(MAKE) -C contrib/chg distclean

clean: cleanbutpackages
	rm -rf packages

install: install-bin install-doc

install-bin: build
	$(PYTHON) setup.py $(PURE) install --root="$(DESTDIR)/" --prefix="$(PREFIX)" --force

install-doc: doc
	cd doc && $(MAKE) $(MFLAGS) install

install-home: install-home-bin install-home-doc

install-home-bin: build
	$(PYTHON) setup.py $(PURE) install --home="$(HOME)" --prefix="" --force

install-home-doc: doc
	cd doc && $(MAKE) $(MFLAGS) PREFIX="$(HOME)" install

MANIFEST-doc:
	$(MAKE) -C doc MANIFEST

MANIFEST.in: MANIFEST-doc
	hg manifest | sed -e 's/^/include /' > MANIFEST.in
	echo include mercurial/__version__.py >> MANIFEST.in
	sed -e 's/^/include /' < doc/MANIFEST >> MANIFEST.in

dist:	tests dist-notests

dist-notests:	doc MANIFEST.in
	TAR_OPTIONS="--owner=root --group=root --mode=u+w,go-w,a+rX-s" $(PYTHON) setup.py -q sdist

check: tests

tests:
	cd tests && $(PYTHON) run-tests.py $(TESTFLAGS)

test-%:
	cd tests && $(PYTHON) run-tests.py $(TESTFLAGS) $@

testpy-%:
	@echo Looking for Python $* in $(HGPYTHONS)
	[ -e $(HGPYTHONS)/$*/bin/python ] || ( \
	cd $$(mktemp --directory --tmpdir) && \
        $(MAKE) -f $(HGROOT)/contrib/Makefile.python PYTHONVER=$* PREFIX=$(HGPYTHONS)/$* python )
	cd tests && $(HGPYTHONS)/$*/bin/python run-tests.py $(TESTFLAGS)

check-code:
	hg manifest | xargs python contrib/check-code.py

format-c:
	clang-format --style file -i \
	  `hg files 'set:(**.c or **.h) and not "listfile:contrib/clang-format-blacklist"'`

update-pot: i18n/hg.pot

i18n/hg.pot: $(PYFILES) $(DOCFILES) i18n/posplit i18n/hggettext
	$(PYTHON) i18n/hggettext mercurial/commands.py \
	  hgext/*.py hgext/*/__init__.py \
	  mercurial/fileset.py mercurial/revset.py \
	  mercurial/templatefilters.py mercurial/templatekw.py \
	  mercurial/templater.py \
	  mercurial/filemerge.py \
	  mercurial/hgweb/webcommands.py \
	  mercurial/util.py \
	  $(DOCFILES) > i18n/hg.pot.tmp
        # All strings marked for translation in Mercurial contain
        # ASCII characters only. But some files contain string
        # literals like this '\037\213'. xgettext thinks it has to
        # parse them even though they are not marked for translation.
        # Extracting with an explicit encoding of ISO-8859-1 will make
        # xgettext "parse" and ignore them.
	echo $(PYFILES) | xargs \
	  xgettext --package-name "Mercurial" \
	  --msgid-bugs-address "<[e-mail]>" \
	  --copyright-holder "Matt Mackall <[e-mail]> and others" \
	  --from-code ISO-8859-1 --join --sort-by-file --add-comments=i18n: \
	  -d hg -p i18n -o hg.pot.tmp
	$(PYTHON) i18n/posplit i18n/hg.pot.tmp
        # The target file is not created before the last step. So it never is in
        # an intermediate state.
	mv -f i18n/hg.pot.tmp i18n/hg.pot

%.po: i18n/hg.pot
        # work on a temporary copy for never having a half completed target
	cp $@ $@.tmp
	msgmerge --no-location --update $@.tmp $^
	mv -f $@.tmp $@

# Packaging targets

osx:
	rm -rf build/mercurial
	/usr/bin/python2.7 setup.py install --optimize=1 \
	  --root=build/mercurial/ --prefix=/usr/local/ \
	  --install-lib=/Library/Python/2.7/site-packages/
	make -C doc all install DESTDIR="$(PWD)/build/mercurial/"
        # Place a bogon .DS_Store file in the target dir so we can be
        # sure it doesn't get included in the final package.
	touch build/mercurial/.DS_Store
        # install zsh completions - this location appears to be
        # searched by default as of macOS Sierra.
	install -d build/mercurial/usr/local/share/zsh/site-functions/
	install -m 0644 contrib/zsh_completion build/mercurial/usr/local/share/zsh/site-functions/_hg
        # install bash completions - there doesn't appear to be a
        # place that's searched by default for bash, so we'll follow
        # the lead of Apple's git install and just put it in a
        # location of our own.
	install -d build/mercurial/usr/local/hg/contrib/
	install -m 0644 contrib/bash_completion build/mercurial/usr/local/hg/contrib/hg-completion.bash
	make -C contrib/chg \
	  HGPATH=/usr/local/bin/hg \
	  PYTHON=/usr/bin/python2.7 \
	  HGEXTDIR=/Library/Python/2.7/site-packages/hgext \
	  DESTDIR=../../build/mercurial \
	  PREFIX=/usr/local \
	  clean install
	mkdir -p $${OUTPUTDIR:-dist}
	HGVER=$$(python contrib/genosxversion.py $(OSXVERSIONFLAGS) build/mercurial/Library/Python/2.7/site-packages/mercurial/__version__.py) && \
	OSXVER=$$(sw_vers -productVersion | cut -d. -f1,2) && \
	pkgbuild --filter \\.DS_Store --root build/mercurial/ \
	  --identifier org.mercurial-scm.mercurial \
	  --version "$${HGVER}" \
	  build/mercurial.pkg && \
	productbuild --distribution contrib/macosx/distribution.xml \
	  --package-path build/ \
	  --version "$${HGVER}" \
	  --resources contrib/macosx/ \
	  "$${OUTPUTDIR:-dist/}"/Mercurial-"$${HGVER}"-macosx"$${OSXVER}".pkg

deb:
	contrib/builddeb

ppa:
	contrib/builddeb --source-only

contrib/docker/debian-%: contrib/docker/debian.template
	sed "s/__CODENAME__/$*/" $< > $@

docker-debian-jessie: contrib/docker/debian-jessie
	mkdir -p packages/debian-jessie
	contrib/dockerdeb debian jessie

docker-debian-stretch: contrib/docker/debian-stretch
	mkdir -p packages/debian-stretch
	contrib/dockerdeb debian stretch

contrib/docker/ubuntu-%: contrib/docker/ubuntu.template
	sed "s/__CODENAME__/$*/" $< > $@

docker-ubuntu-trusty: contrib/docker/ubuntu-trusty
	contrib/dockerdeb ubuntu trusty

docker-ubuntu-trusty-ppa: contrib/docker/ubuntu-trusty
	contrib/dockerdeb ubuntu trusty --source-only

docker-ubuntu-xenial: contrib/docker/ubuntu-xenial
	contrib/dockerdeb ubuntu xenial

docker-ubuntu-xenial-ppa: contrib/docker/ubuntu-xenial
	contrib/dockerdeb ubuntu xenial --source-only

docker-ubuntu-yakkety: contrib/docker/ubuntu-yakkety
	contrib/dockerdeb ubuntu yakkety

docker-ubuntu-yakkety-ppa: contrib/docker/ubuntu-yakkety
	contrib/dockerdeb ubuntu yakkety --source-only

docker-ubuntu-zesty: contrib/docker/ubuntu-zesty
	contrib/dockerdeb ubuntu zesty

docker-ubuntu-zesty-ppa: contrib/docker/ubuntu-zesty
	contrib/dockerdeb ubuntu zesty --source-only

fedora20:
	mkdir -p packages/fedora20
	contrib/buildrpm
	cp rpmbuild/RPMS/*/* packages/fedora20
	cp rpmbuild/SRPMS/* packages/fedora20
	rm -rf rpmbuild

docker-fedora20:
	mkdir -p packages/fedora20
	contrib/dockerrpm fedora20

fedora21:
	mkdir -p packages/fedora21
	contrib/buildrpm
	cp rpmbuild/RPMS/*/* packages/fedora21
	cp rpmbuild/SRPMS/* packages/fedora21
	rm -rf rpmbuild

docker-fedora21:
	mkdir -p packages/fedora21
	contrib/dockerrpm fedora21

centos5:
	mkdir -p packages/centos5
	contrib/buildrpm --withpython
	cp rpmbuild/RPMS/*/* packages/centos5
	cp rpmbuild/SRPMS/* packages/centos5

docker-centos5:
	mkdir -p packages/centos5
	contrib/dockerrpm centos5 --withpython

centos6:
	mkdir -p packages/centos6
	contrib/buildrpm --withpython
	cp rpmbuild/RPMS/*/* packages/centos6
	cp rpmbuild/SRPMS/* packages/centos6

docker-centos6:
	mkdir -p packages/centos6
	contrib/dockerrpm centos6 --withpython

centos7:
	mkdir -p packages/centos7
	contrib/buildrpm
	cp rpmbuild/RPMS/*/* packages/centos7
	cp rpmbuild/SRPMS/* packages/centos7

docker-centos7:
	mkdir -p packages/centos7
	contrib/dockerrpm centos7

linux-wheels: linux-wheels-x86_64 linux-wheels-i686

linux-wheels-x86_64:
	docker run -e "HGTEST_JOBS=$(shell nproc)" --rm -ti -v `pwd`:/src quay.io/pypa/manylinux1_x86_64 /src/contrib/build-linux-wheels.sh

linux-wheels-i686:
	docker run -e "HGTEST_JOBS=$(shell nproc)" --rm -ti -v `pwd`:/src quay.io/pypa/manylinux1_i686 linux32 /src/contrib/build-linux-wheels.sh

.PHONY: help all local build doc cleanbutpackages clean install install-bin \
	install-doc install-home install-home-bin install-home-doc \
	dist dist-notests check tests check-code format-c update-pot \
	osx deb ppa docker-debian-jessie docker-debian-stretch \
	docker-ubuntu-trusty docker-ubuntu-trusty-ppa \
	docker-ubuntu-xenial docker-ubuntu-xenial-ppa \
	docker-ubuntu-yakkety docker-ubuntu-yakkety-ppa \
	docker-ubuntu-zesty docker-ubuntu-zesty-ppa \
	fedora20 docker-fedora20 fedora21 docker-fedora21 \
	centos5 docker-centos5 centos6 docker-centos6 centos7 docker-centos7 \
	linux-wheels