hgext/automv.py

lfs: import the Facebook git-lfs client extension

The purpose of this is the same as the built-in largefiles extension- to handle
huge files outside of the normal storage system, generally to keep the amount of
data cloned to a lower amount.  There are several benefits of implementing the
git-lfs protocol, instead of using the largefiles extension:

  - Bitbucket and Github support (and probably wider support in 3rd party
    hosting sites in general). [1][2]

  - The number of hg internals monkey patched are several orders of magnitude
    lower, so it will be easier to reason about and maintain.  Future commands
    will likely just work, without requiring various wrappers.

  - The "standin" files are only written to the filelog, not the disk.  That
    should avoid weird edge cases where the largefile and standin files get out
    of sync. [3]  It also avoids the occasional printing of the "hidden" standin
    file in various messages.

  - Filesets like size() will work, even if the file isn't present.  (It always
    says 41 bytes for largefiles, whether present or not.)

The only place that I see where largefiles comes out on top is that it works
with `hg serve` for simple sharing, without external infrastructure.  Getting
lfs-test-server working was a hassle, and took awhile to figure out.  Maybe we
can do something to make it work in the future.

Long term, I expect that this will be highly preferred over largefiles.  But if
we are to recommend this to largefile users, there are some UI issues to
bikeshed.  Until they are resolved, I've marked this experimental, and am not
putting a pointer to this in the largefiles help.  The (non exhaustive) list of
issues I've seen so far are:

  - It isn't sufficient to just enable the largefiles extension- you have to
    explicitly add a file with --large before it will pay attention to the
    configured sizes and patterns on future adds.  The justification being that
    once you use it, you're stuck with it.  I've seen people confused by this,
    and haven't liked it myself.  But it's also saved me a few times.  Should we
    do something like have a specific enabling config setting that must be set
    in the local repo config, so that enabling this extension in the user or
    system hgrc doesn't silently start storing lfs files?

  - The largefiles extension adds a repo requirement when the first largefile is
    committed, so that the extension must always be enabled in the future.  This
    extension is not doing that, and since I only enabled it locally to avoid
    infecting other repos, I got a cryptic error about missing flag processors
    when I cloned.  Is there no repo requirement due to shallow/narrow clone
    considerations (or other future advanced things)?

  - In the (small amount of) reading I've done about the git implementation, it
    seems that the files and sizes are stored in a tracked .gitattributes file.
    I think a tracked file for this would be extremely useful for consistency
    across developers, but this kind of touches on the tracked hgrc file
    proposal a few months back.

  - The git client can specify file patterns, not just sizes.

  - The largefiles extension has a cache directory in the local repo, but also a
    system wide one.  We should probably implement a system wide cache too, so
    that multiple clones don't have to refetch the files from the server.

  - Jun mentioned other missing features, like SSH authentication, gc, etc.

The code corresponds to c0492b73c7ef in hg-experimental. [4]  The only tweaks
are to load the extension in the tests with 'lfs=' instead of
'lfs=$TESTDIR/../hgext3rd/lfs', change the import in the *.py test to hgext
(from hgext3rd), add the 'testedwith' declaration, and mark it experimental for
now.  The infinite-push, p4fastimport, and remotefilelog tests were left behind.

The devel-warnings for unregistered config options are not corrected yet, nor
are the import check warnings.

[1] https://www.mercurial-scm.org/pipermail/mercurial/2017-November/050699.html
[2] https://bitbucket.org/site/master/issues/3843/largefiles-support-bb-3903
[3] https://bz.mercurial-scm.org/show_bug.cgi?id=5738
[4] https://bitbucket.org/facebook/hg-experimental

# automv.py
#
# Copyright 2013-2016 Facebook, Inc.
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
"""check for unrecorded moves at commit time (EXPERIMENTAL)

This extension checks at commit/amend time if any of the committed files
comes from an unrecorded mv.

The threshold at which a file is considered a move can be set with the
``automv.similarity`` config option. This option takes a percentage between 0
(disabled) and 100 (files must be identical), the default is 95.

"""

# Using 95 as a default similarity is based on an analysis of the mercurial
# repositories of the cpython, mozilla-central & mercurial repositories, as
# well as 2 very large facebook repositories. At 95 50% of all potential
# missed moves would be caught, as well as correspond with 87% of all
# explicitly marked moves.  Together, 80% of moved files are 95% similar or
# more.
#
# See http://markmail.org/thread/5pxnljesvufvom57 for context.

from __future__ import absolute_import

from mercurial.i18n import _
from mercurial import (
    commands,
    copies,
    error,
    extensions,
    pycompat,
    registrar,
    scmutil,
    similar
)

configtable = {}
configitem = registrar.configitem(configtable)

configitem('automv', 'similarity',
    default=95,
)

def extsetup(ui):
    entry = extensions.wrapcommand(
        commands.table, 'commit', mvcheck)
    entry[1].append(
        ('', 'no-automv', None,
         _('disable automatic file move detection')))

def mvcheck(orig, ui, repo, *pats, **opts):
    """Hook to check for moves at commit time"""
    opts = pycompat.byteskwargs(opts)
    renames = None
    disabled = opts.pop('no_automv', False)
    if not disabled:
        threshold = ui.configint('automv', 'similarity')
        if not 0 <= threshold <= 100:
            raise error.Abort(_('automv.similarity must be between 0 and 100'))
        if threshold > 0:
            match = scmutil.match(repo[None], pats, opts)
            added, removed = _interestingfiles(repo, match)
            renames = _findrenames(repo, match, added, removed,
                                   threshold / 100.0)

    with repo.wlock():
        if renames is not None:
            scmutil._markchanges(repo, (), (), renames)
        return orig(ui, repo, *pats, **pycompat.strkwargs(opts))

def _interestingfiles(repo, matcher):
    """Find what files were added or removed in this commit.

    Returns a tuple of two lists: (added, removed). Only files not *already*
    marked as moved are included in the added list.

    """
    stat = repo.status(match=matcher)
    added = stat[1]
    removed = stat[2]

    copy = copies._forwardcopies(repo['.'], repo[None], matcher)
    # remove the copy files for which we already have copy info
    added = [f for f in added if f not in copy]

    return added, removed

def _findrenames(repo, matcher, added, removed, similarity):
    """Find what files in added are really moved files.

    Any file named in removed that is at least similarity% similar to a file
    in added is seen as a rename.

    """
    renames = {}
    if similarity > 0:
        for src, dst, score in similar.findrenames(
                repo, added, removed, similarity):
            if repo.ui.verbose:
                repo.ui.status(
                    _('detected move of %s as %s (%d%% similar)\n') % (
                        matcher.rel(src), matcher.rel(dst), score * 100))
            renames[dst] = src
    if renames:
        repo.ui.status(_('detected move of %d files\n') % len(renames))
    return renames