tests/test-eol.t

revset: use localrepo revbranchcache for branch name filtering

Branch name filtering in revsets was expensive. For every rev it created a
changectx and called .branch() which retrieved the branch name from the
changelog.

Instead, use the revbranchcache.

The revbranchcache is used read-only. The revset implementation with generators
and callbacks makes it hard to figure out when we are done using/updating the
cache and could write it back. It would also be 'tricky' to lock the repo for
writing from within a revset execution. Finally, the branchmap update will
usually make sure that the cache is updated before any revset can be run.
The revbranchcache is used without any locking but is short-lived and used in a
tight loop where we can assume that the changelog doesn't change ... or where
it not is relevant to us if it does.

perfrevset 'branch(mobile)' on mozilla-central.
Before:
! wall 10.989637 comb 10.970000 user 10.940000 sys 0.030000 (best of 3)
After, no cache:
! wall 7.368656 comb 7.370000 user 7.360000 sys 0.010000 (best of 3)
After, with cache:
! wall 0.528098 comb 0.530000 user 0.530000 sys 0.000000 (best of 18)

The performance improvement even without cache come from being based on
branchinfo on the changelog instead of using ctx.branch().

Some tests are added to verify that the revbranchcache works and keep an eye on
when the cache files actually are updated.

Test EOL extension

  $ cat >> $HGRCPATH <<EOF
  > [diff]
  > git = True
  > EOF

Set up helpers

  $ cat > switch-eol.py <<EOF
  > import sys
  > try:
  >     import os, msvcrt
  >     msvcrt.setmode(sys.stdin.fileno(), os.O_BINARY)
  >     msvcrt.setmode(sys.stdout.fileno(), os.O_BINARY)
  > except ImportError:
  >     pass
  > (old, new) = sys.argv[1] == 'LF' and ('\n', '\r\n') or ('\r\n', '\n')
  > print "%% switching encoding from %r to %r" % (old, new)
  > for path in sys.argv[2:]:
  >     data = file(path, 'rb').read()
  >     data = data.replace(old, new)
  >     file(path, 'wb').write(data)
  > EOF

  $ seteol () {
  >     if [ $1 = "LF" ]; then
  >         EOL='\n'
  >     else
  >         EOL='\r\n'
  >     fi
  > }

  $ makerepo () {
  >     seteol $1
  >     echo "% setup $1 repository"
  >     hg init repo
  >     cd repo
  >     cat > .hgeol <<EOF
  > [repository]
  > native = $1
  > [patterns]
  > mixed.txt = BIN
  > **.txt = native
  > EOF
  >     printf "first${EOL}second${EOL}third${EOL}" > a.txt
  >     hg commit --addremove -m 'checkin'
  >     echo
  >     cd ..
  > }

  $ dotest () {
  >     seteol $1
  >     echo "% hg clone repo repo-$1"
  >     hg clone --noupdate repo repo-$1
  >     cd repo-$1
  >     cat > .hg/hgrc <<EOF
  > [extensions]
  > eol =
  > [eol]
  > native = $1
  > EOF
  >     hg update
  >     echo '% a.txt'
  >     cat a.txt
  >     echo '% hg cat a.txt'
  >     hg cat a.txt
  >     printf "fourth${EOL}" >> a.txt
  >     echo '% a.txt'
  >     cat a.txt
  >     hg diff
  >     python ../switch-eol.py $1 a.txt
  >     echo '% hg diff only reports a single changed line:'
  >     hg diff
  >     echo "% reverting back to $1 format"
  >     hg revert a.txt
  >     cat a.txt
  >     printf "first\r\nsecond\n" > mixed.txt
  >     hg add mixed.txt
  >     echo "% hg commit of inconsistent .txt file marked as binary (should work)"
  >     hg commit -m 'binary file'
  >     echo "% hg commit of inconsistent .txt file marked as native (should fail)"
  >     printf "first\nsecond\r\nthird\nfourth\r\n" > a.txt
  >     hg commit -m 'inconsistent file'
  >     echo "% hg commit --config eol.only-consistent=False (should work)"
  >     hg commit --config eol.only-consistent=False -m 'inconsistent file'
  >     echo "% hg commit of binary .txt file marked as native (binary files always okay)"
  >     printf "first${EOL}\0${EOL}third${EOL}" > a.txt
  >     hg commit -m 'binary file'
  >     cd ..
  >     rm -r repo-$1
  > }

  $ makemixedrepo () {
  >     echo
  >     echo "# setup $1 repository"
  >     hg init mixed
  >     cd mixed
  >     printf "foo\r\nbar\r\nbaz\r\n" > win.txt
  >     printf "foo\nbar\nbaz\n" > unix.txt
  >     #printf "foo\r\nbar\nbaz\r\n" > mixed.txt
  >     hg commit --addremove -m 'created mixed files'
  >     echo "# setting repository-native EOLs to $1"
  >     cat > .hgeol <<EOF
  > [repository]
  > native = $1
  > [patterns]
  > **.txt = native
  > EOF
  >     hg commit --addremove -m 'added .hgeol'
  >     cd ..
  > }

  $ testmixed () {
  >     echo
  >     echo "% hg clone mixed mixed-$1"
  >     hg clone mixed mixed-$1
  >     cd mixed-$1
  >     echo '% hg status (eol extension not yet activated)'
  >     hg status
  >     cat > .hg/hgrc <<EOF
  > [extensions]
  > eol =
  > [eol]
  > native = $1
  > EOF
  >     echo '% hg status (eol activated)'
  >     hg status
  >     echo '% hg commit'
  >     hg commit -m 'synchronized EOLs'
  >     echo '% hg status'
  >     hg status
  >     cd ..
  >     rm -r mixed-$1
  > }

Basic tests

  $ makerepo LF
  % setup LF repository
  adding .hgeol
  adding a.txt
  
  $ dotest LF
  % hg clone repo repo-LF
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  % a.txt
  first
  second
  third
  % hg cat a.txt
  first
  second
  third
  % a.txt
  first
  second
  third
  fourth
  diff --git a/a.txt b/a.txt
  --- a/a.txt
  +++ b/a.txt
  @@ -1,3 +1,4 @@
   first
   second
   third
  +fourth
  % switching encoding from '\n' to '\r\n'
  % hg diff only reports a single changed line:
  diff --git a/a.txt b/a.txt
  --- a/a.txt
  +++ b/a.txt
  @@ -1,3 +1,4 @@
   first
   second
   third
  +fourth
  % reverting back to LF format
  first
  second
  third
  % hg commit of inconsistent .txt file marked as binary (should work)
  % hg commit of inconsistent .txt file marked as native (should fail)
  abort: inconsistent newline style in a.txt
  
  % hg commit --config eol.only-consistent=False (should work)
  % hg commit of binary .txt file marked as native (binary files always okay)
  $ dotest CRLF
  % hg clone repo repo-CRLF
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  % a.txt
  first\r (esc)
  second\r (esc)
  third\r (esc)
  % hg cat a.txt
  first
  second
  third
  % a.txt
  first\r (esc)
  second\r (esc)
  third\r (esc)
  fourth\r (esc)
  diff --git a/a.txt b/a.txt
  --- a/a.txt
  +++ b/a.txt
  @@ -1,3 +1,4 @@
   first
   second
   third
  +fourth
  % switching encoding from '\r\n' to '\n'
  % hg diff only reports a single changed line:
  diff --git a/a.txt b/a.txt
  --- a/a.txt
  +++ b/a.txt
  @@ -1,3 +1,4 @@
   first
   second
   third
  +fourth
  % reverting back to CRLF format
  first\r (esc)
  second\r (esc)
  third\r (esc)
  % hg commit of inconsistent .txt file marked as binary (should work)
  % hg commit of inconsistent .txt file marked as native (should fail)
  abort: inconsistent newline style in a.txt
  
  % hg commit --config eol.only-consistent=False (should work)
  % hg commit of binary .txt file marked as native (binary files always okay)
  $ rm -r repo
  $ makerepo CRLF
  % setup CRLF repository
  adding .hgeol
  adding a.txt
  
  $ dotest LF
  % hg clone repo repo-LF
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  % a.txt
  first
  second
  third
  % hg cat a.txt
  first\r (esc)
  second\r (esc)
  third\r (esc)
  % a.txt
  first
  second
  third
  fourth
  diff --git a/a.txt b/a.txt
  --- a/a.txt
  +++ b/a.txt
  @@ -1,3 +1,4 @@
   first\r (esc)
   second\r (esc)
   third\r (esc)
  +fourth\r (esc)
  % switching encoding from '\n' to '\r\n'
  % hg diff only reports a single changed line:
  diff --git a/a.txt b/a.txt
  --- a/a.txt
  +++ b/a.txt
  @@ -1,3 +1,4 @@
   first\r (esc)
   second\r (esc)
   third\r (esc)
  +fourth\r (esc)
  % reverting back to LF format
  first
  second
  third
  % hg commit of inconsistent .txt file marked as binary (should work)
  % hg commit of inconsistent .txt file marked as native (should fail)
  abort: inconsistent newline style in a.txt
  
  % hg commit --config eol.only-consistent=False (should work)
  % hg commit of binary .txt file marked as native (binary files always okay)
  $ dotest CRLF
  % hg clone repo repo-CRLF
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  % a.txt
  first\r (esc)
  second\r (esc)
  third\r (esc)
  % hg cat a.txt
  first\r (esc)
  second\r (esc)
  third\r (esc)
  % a.txt
  first\r (esc)
  second\r (esc)
  third\r (esc)
  fourth\r (esc)
  diff --git a/a.txt b/a.txt
  --- a/a.txt
  +++ b/a.txt
  @@ -1,3 +1,4 @@
   first\r (esc)
   second\r (esc)
   third\r (esc)
  +fourth\r (esc)
  % switching encoding from '\r\n' to '\n'
  % hg diff only reports a single changed line:
  diff --git a/a.txt b/a.txt
  --- a/a.txt
  +++ b/a.txt
  @@ -1,3 +1,4 @@
   first\r (esc)
   second\r (esc)
   third\r (esc)
  +fourth\r (esc)
  % reverting back to CRLF format
  first\r (esc)
  second\r (esc)
  third\r (esc)
  % hg commit of inconsistent .txt file marked as binary (should work)
  % hg commit of inconsistent .txt file marked as native (should fail)
  abort: inconsistent newline style in a.txt
  
  % hg commit --config eol.only-consistent=False (should work)
  % hg commit of binary .txt file marked as native (binary files always okay)
  $ rm -r repo

Mixed tests

  $ makemixedrepo LF
  
  # setup LF repository
  adding unix.txt
  adding win.txt
  # setting repository-native EOLs to LF
  adding .hgeol
  $ testmixed LF
  
  % hg clone mixed mixed-LF
  updating to branch default
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  % hg status (eol extension not yet activated)
  % hg status (eol activated)
  M win.txt
  % hg commit
  % hg status
  $ testmixed CRLF
  
  % hg clone mixed mixed-CRLF
  updating to branch default
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  % hg status (eol extension not yet activated)
  % hg status (eol activated)
  M win.txt
  % hg commit
  % hg status
  $ rm -r mixed
  $ makemixedrepo CRLF
  
  # setup CRLF repository
  adding unix.txt
  adding win.txt
  # setting repository-native EOLs to CRLF
  adding .hgeol
  $ testmixed LF
  
  % hg clone mixed mixed-LF
  updating to branch default
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  % hg status (eol extension not yet activated)
  % hg status (eol activated)
  M unix.txt
  % hg commit
  % hg status
  $ testmixed CRLF
  
  % hg clone mixed mixed-CRLF
  updating to branch default
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  % hg status (eol extension not yet activated)
  % hg status (eol activated)
  M unix.txt
  % hg commit
  % hg status
  $ rm -r mixed

  $ echo '[extensions]' >> $HGRCPATH
  $ echo 'eol =' >> $HGRCPATH

#if unix-permissions

Test issue2569 -- eol extension takes write lock on reading:

  $ hg init repo
  $ cd repo
  $ touch .hgeol
  $ hg status
  ? .hgeol
  $ chmod -R -w .hg
  $ sleep 1
  $ touch .hgeol
  $ hg status --traceback
  ? .hgeol
  $ chmod -R u+w .hg
  $ cd ..

#endif

Test cleverencode: and cleverdecode: aliases for win32text extension

  $ cat <<EOF >> $HGRCPATH
  > [encode]
  > **.txt = cleverencode:
  > [decode]
  > **.txt = cleverdecode:
  > EOF

  $ hg init win32compat
  $ cd win32compat
  $ printf "foo\r\nbar\r\nbaz\r\n" > win.txt
  $ printf "foo\nbar\nbaz\n" > unix.txt
  $ hg add
  adding unix.txt
  adding win.txt
  $ hg commit -m checkin

Check that both files have LF line-endings in the repository:

  $ hg cat win.txt
  foo
  bar
  baz
  $ hg cat unix.txt
  foo
  bar
  baz

Test handling of a broken .hgeol file:

  $ touch .hgeol
  $ hg add .hgeol
  $ hg commit -m 'clean version'
  $ echo "bad" > .hgeol
  $ hg status
  warning: ignoring .hgeol file due to parse error at .hgeol:1: bad
  M .hgeol
  $ hg revert .hgeol
  warning: ignoring .hgeol file due to parse error at .hgeol:1: bad
  $ hg status
  ? .hgeol.orig

Test eol.only-consistent can be specified in .hgeol

  $ cd $TESTTMP
  $ hg init only-consistent
  $ cd only-consistent
  $ printf "first\nsecond\r\n" > a.txt
  $ hg add a.txt
  $ cat > .hgeol << EOF
  > [eol]
  > only-consistent = True
  > EOF
  $ hg commit -m 'inconsistent'
  abort: inconsistent newline style in a.txt
  
  [255]
  $ cat > .hgeol << EOF
  > [eol]
  > only-consistent = False
  > EOF
  $ hg commit -m 'consistent'


Test trailing newline

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > eol=
  > EOF

setup repository

  $ cd $TESTTMP
  $ hg init trailing
  $ cd trailing
  $ cat > .hgeol <<EOF
  > [patterns]
  > **.txt = native
  > [eol]
  > fix-trailing-newline = False
  > EOF

add text without trailing newline

  $ printf "first\nsecond" > a.txt
  $ hg commit --addremove -m 'checking in'
  adding .hgeol
  adding a.txt
  $ rm a.txt
  $ hg update -C -q
  $ cat a.txt
  first
  second (no-eol)

  $ cat > .hgeol <<EOF
  > [patterns]
  > **.txt = native
  > [eol]
  > fix-trailing-newline = True
  > EOF
  $ printf "third\nfourth" > a.txt
  $ hg commit -m 'checking in with newline fix'
  $ rm a.txt
  $ hg update -C -q
  $ cat a.txt
  third
  fourth

append a line without trailing newline

  $ printf "fifth" >> a.txt
  $ hg commit -m 'adding another line line'
  $ rm a.txt
  $ hg update -C -q
  $ cat a.txt
  third
  fourth
  fifth

amend of changesets with renamed/deleted files expose new code paths

  $ hg mv a.txt b.txt
  $ hg ci --amend -q
  $ hg diff -c.
  diff --git a/a.txt b/b.txt
  rename from a.txt
  rename to b.txt
  --- a/a.txt
  +++ b/b.txt
  @@ -1,2 +1,3 @@
   third
   fourth
  +fifth

  $ cd ..