annotate tests/test-rename-dir-merge.t @ 23787:678f53865c68

revset: use localrepo revbranchcache for branch name filtering

Branch name filtering in revsets was expensive. For every rev it created a
changectx and called .branch() which retrieved the branch name from the
changelog.

Instead, use the revbranchcache.

The revbranchcache is used read-only. The revset implementation with generators
and callbacks makes it hard to figure out when we are done using/updating the
cache and could write it back. It would also be 'tricky' to lock the repo for
writing from within a revset execution. Finally, the branchmap update will
usually make sure that the cache is updated before any revset can be run.
The revbranchcache is used without any locking but is short-lived and used in a
tight loop where we can assume that the changelog doesn't change ... or where
it not is relevant to us if it does.

perfrevset 'branch(mobile)' on mozilla-central.
Before:
! wall 10.989637 comb 10.970000 user 10.940000 sys 0.030000 (best of 3)
After, no cache:
! wall 7.368656 comb 7.370000 user 7.360000 sys 0.010000 (best of 3)
After, with cache:
! wall 0.528098 comb 0.530000 user 0.530000 sys 0.000000 (best of 18)

The performance improvement even without cache come from being based on
branchinfo on the changelog instead of using ctx.branch().

Some tests are added to verify that the revbranchcache works and keep an eye on
when the cache files actually are updated.

  $ hg init t
  $ cd t

  $ mkdir a
  $ echo foo > a/a
  $ echo bar > a/b
  $ hg ci -Am "0"
  adding a/a
  adding a/b

  $ hg co -C 0
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg mv a b
  moving a/a to b/a (glob)
  moving a/b to b/b (glob)
  $ hg ci -m "1 mv a/ b/"

  $ hg co -C 0
  2 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ echo baz > a/c
  $ echo quux > a/d
  $ hg add a/c
  $ hg ci -m "2 add a/c"
  created new head

  $ hg merge --debug 1
    searching for copies back to rev 1
    unmatched files in local:
     a/c
    unmatched files in other:
     b/a
     b/b
    all copies found (* = to merge, ! = divergent, % = renamed and deleted):
     src: 'a/a' -> dst: 'b/a' 
     src: 'a/b' -> dst: 'b/b' 
    checking for directory renames
     discovered dir src: 'a/' -> dst: 'b/'
     pending file src: 'a/c' -> dst: 'b/c'
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: f9b20c0d4c51, local: ce36d17b18fb+, remote: 397f8b00a740
   a/a: other deleted -> r
  removing a/a
   a/b: other deleted -> r
  removing a/b
  updating: a/b 2/5 files (40.00%)
   b/a: remote created -> g
  getting b/a
   b/b: remote created -> g
  getting b/b
  updating: b/b 4/5 files (80.00%)
   b/c: remote directory rename - move from a/c -> dm
  updating: b/c 5/5 files (100.00%)
  moving a/c to b/c (glob)
  3 files updated, 0 files merged, 2 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ echo a/* b/*
  a/d b/a b/b b/c
  $ hg st -C
  M b/a
  M b/b
  A b/c
    a/c
  R a/a
  R a/b
  R a/c
  ? a/d
  $ hg ci -m "3 merge 2+1"
  $ hg debugrename b/c
  b/c renamed from a/c:354ae8da6e890359ef49ade27b68bbc361f3ca88 (glob)

  $ hg co -C 1
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge --debug 2
    searching for copies back to rev 1
    unmatched files in local:
     b/a
     b/b
    unmatched files in other:
     a/c
    all copies found (* = to merge, ! = divergent, % = renamed and deleted):
     src: 'a/a' -> dst: 'b/a' 
     src: 'a/b' -> dst: 'b/b' 
    checking for directory renames
     discovered dir src: 'a/' -> dst: 'b/'
     pending file src: 'a/c' -> dst: 'b/c'
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: f9b20c0d4c51, local: 397f8b00a740+, remote: ce36d17b18fb
   b/c: local directory rename - get from a/c -> dg
  updating: b/c 1/1 files (100.00%)
  getting a/c to b/c
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ echo a/* b/*
  a/d b/a b/b b/c
  $ hg st -C
  A b/c
    a/c
  ? a/d
  $ hg ci -m "4 merge 1+2"
  created new head
  $ hg debugrename b/c
  b/c renamed from a/c:354ae8da6e890359ef49ade27b68bbc361f3ca88 (glob)

Local directory rename with conflicting file added in remote source directory
and untracked in local target directory.

  $ hg co -qC 1
  $ echo target > b/c
  $ hg merge 2
  b/c: untracked file differs
  abort: untracked files in working directory differ from files in requested revision
  [255]
  $ cat b/c
  target
but it should succeed if the content matches
  $ hg cat -r 2 a/c > b/c
  $ hg merge 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st -C
  A b/c
    a/c
  ? a/d

Local directory rename with conflicting file added in remote source directory
and committed in local target directory.

  $ hg co -qC 1
  $ echo target > b/c
  $ hg add b/c
  $ hg commit -qm 'new file in target directory'
  $ hg merge 2
  merging b/c and a/c to b/c
  warning: conflicts during merge.
  merging b/c incomplete! (edit conflicts, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ hg st -A
  M b/c
    a/c
  ? a/d
  ? b/c.orig
  C b/a
  C b/b
  $ cat b/c
  <<<<<<< local: f1c50ca4f127 - test: new file in target directory
  target
  =======
  baz
  >>>>>>> other: ce36d17b18fb  - test: 2 add a/c
  $ rm b/c.orig

Remote directory rename with conflicting file added in remote target directory
and committed in local source directory.

  $ hg co -qC 2
  $ hg st -A
  ? a/d
  C a/a
  C a/b
  C a/c
  $ hg merge 5
  merging a/c and b/c to b/c
  warning: conflicts during merge.
  merging b/c incomplete! (edit conflicts, then use 'hg resolve --mark')
  2 files updated, 0 files merged, 2 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ hg st -A
  M b/a
  M b/b
  M b/c
    a/c
  R a/a
  R a/b
  R a/c
  ? a/d
  ? b/c.orig
  $ cat b/c
  <<<<<<< local: ce36d17b18fb  - test: 2 add a/c
  baz
  =======
  target
  >>>>>>> other: f1c50ca4f127 - test: new file in target directory

Second scenario with two repos:

  $ cd ..
  $ hg init r1
  $ cd r1
  $ mkdir a
  $ echo foo > a/f
  $ hg add a
  adding a/f (glob)
  $ hg ci -m "a/f == foo"
  $ cd ..

  $ hg clone r1 r2
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd r2
  $ hg mv a b
  moving a/f to b/f (glob)
  $ echo foo1 > b/f
  $ hg ci -m" a -> b, b/f == foo1"
  $ cd ..

  $ cd r1
  $ mkdir a/aa
  $ echo bar > a/aa/g
  $ hg add a/aa
  adding a/aa/g (glob)
  $ hg ci -m "a/aa/g"
  $ hg pull ../r2
  pulling from ../r2
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  (run 'hg heads' to see heads, 'hg merge' to merge)

  $ hg merge
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ hg st -C
  M b/f
  A b/aa/g
    a/aa/g
  R a/aa/g
  R a/f

  $ cd ..