hgext/win32text.py

match: making visitdir() deal with non-recursive entries

Primarily as an optimization to avoid recursing into directories that will
never have a match inside, this classifies each matcher pattern's root as
recursive or non-recursive (erring on the side of keeping it recursive,
which may lead to wasteful directory or manifest walks that yield no matches).

I measured the performance of "rootfilesin" in two repos:
- The Firefox repo with tree manifests, with
  "hg files -r . -I rootfilesin:browser".
  The browser directory contains about 3K files across 249 subdirectories.
- A specific Google-internal directory which contains 75K files across 19K
  subdirectories, with "hg files -r . -I rootfilesin:REDACTED".

I tested with both cold and warm disk caches. Cold cache was produced by
running "sync; echo 3 > /proc/sys/vm/drop_caches". Warm cache was produced
by re-running the same command a few times.

These were the results:

               Cold cache           Warm cache
             Before   After      Before   After
firefox      0m5.1s   0m2.18s   0m0.22s  0m0.14s
google3 dir  2m3.9s   0m1.57s   0m8.12s  0m0.16s

Certain extensions, notably narrowhg, can depend on this for correctness
(not trying to recurse into directories for which it has no information).

# win32text.py - LF <-> CRLF/CR translation utilities for Windows/Mac users
#
#  Copyright 2005, 2007-2009 Matt Mackall <[e-mail]> and others
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

'''perform automatic newline conversion (DEPRECATED)

  Deprecation: The win32text extension requires each user to configure
  the extension again and again for each clone since the configuration
  is not copied when cloning.

  We have therefore made the ``eol`` as an alternative. The ``eol``
  uses a version controlled file for its configuration and each clone
  will therefore use the right settings from the start.

To perform automatic newline conversion, use::

  [extensions]
  win32text =
  [encode]
  ** = cleverencode:
  # or ** = macencode:

  [decode]
  ** = cleverdecode:
  # or ** = macdecode:

If not doing conversion, to make sure you do not commit CRLF/CR by accident::

  [hooks]
  pretxncommit.crlf = python:hgext.win32text.forbidcrlf
  # or pretxncommit.cr = python:hgext.win32text.forbidcr

To do the same check on a server to prevent CRLF/CR from being
pushed or pulled::

  [hooks]
  pretxnchangegroup.crlf = python:hgext.win32text.forbidcrlf
  # or pretxnchangegroup.cr = python:hgext.win32text.forbidcr
'''

from __future__ import absolute_import

import re
from mercurial.i18n import _
from mercurial.node import (
    short,
)
from mercurial import (
    util,
)

# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'

# regexp for single LF without CR preceding.
re_single_lf = re.compile('(^|[^\r])\n', re.MULTILINE)

newlinestr = {'\r\n': 'CRLF', '\r': 'CR'}
filterstr = {'\r\n': 'clever', '\r': 'mac'}

def checknewline(s, newline, ui=None, repo=None, filename=None):
    # warn if already has 'newline' in repository.
    # it might cause unexpected eol conversion.
    # see issue 302:
    #   https://bz.mercurial-scm.org/302
    if newline in s and ui and filename and repo:
        ui.warn(_('WARNING: %s already has %s line endings\n'
                  'and does not need EOL conversion by the win32text plugin.\n'
                  'Before your next commit, please reconsider your '
                  'encode/decode settings in \nMercurial.ini or %s.\n') %
                (filename, newlinestr[newline], repo.join('hgrc')))

def dumbdecode(s, cmd, **kwargs):
    checknewline(s, '\r\n', **kwargs)
    # replace single LF to CRLF
    return re_single_lf.sub('\\1\r\n', s)

def dumbencode(s, cmd):
    return s.replace('\r\n', '\n')

def macdumbdecode(s, cmd, **kwargs):
    checknewline(s, '\r', **kwargs)
    return s.replace('\n', '\r')

def macdumbencode(s, cmd):
    return s.replace('\r', '\n')

def cleverdecode(s, cmd, **kwargs):
    if not util.binary(s):
        return dumbdecode(s, cmd, **kwargs)
    return s

def cleverencode(s, cmd):
    if not util.binary(s):
        return dumbencode(s, cmd)
    return s

def macdecode(s, cmd, **kwargs):
    if not util.binary(s):
        return macdumbdecode(s, cmd, **kwargs)
    return s

def macencode(s, cmd):
    if not util.binary(s):
        return macdumbencode(s, cmd)
    return s

_filters = {
    'dumbdecode:': dumbdecode,
    'dumbencode:': dumbencode,
    'cleverdecode:': cleverdecode,
    'cleverencode:': cleverencode,
    'macdumbdecode:': macdumbdecode,
    'macdumbencode:': macdumbencode,
    'macdecode:': macdecode,
    'macencode:': macencode,
    }

def forbidnewline(ui, repo, hooktype, node, newline, **kwargs):
    halt = False
    seen = set()
    # we try to walk changesets in reverse order from newest to
    # oldest, so that if we see a file multiple times, we take the
    # newest version as canonical. this prevents us from blocking a
    # changegroup that contains an unacceptable commit followed later
    # by a commit that fixes the problem.
    tip = repo['tip']
    for rev in xrange(len(repo) - 1, repo[node].rev() - 1, -1):
        c = repo[rev]
        for f in c.files():
            if f in seen or f not in tip or f not in c:
                continue
            seen.add(f)
            data = c[f].data()
            if not util.binary(data) and newline in data:
                if not halt:
                    ui.warn(_('attempt to commit or push text file(s) '
                              'using %s line endings\n') %
                              newlinestr[newline])
                ui.warn(_('in %s: %s\n') % (short(c.node()), f))
                halt = True
    if halt and hooktype == 'pretxnchangegroup':
        crlf = newlinestr[newline].lower()
        filter = filterstr[newline]
        ui.warn(_('\nTo prevent this mistake in your local repository,\n'
                  'add to Mercurial.ini or .hg/hgrc:\n'
                  '\n'
                  '[hooks]\n'
                  'pretxncommit.%s = python:hgext.win32text.forbid%s\n'
                  '\n'
                  'and also consider adding:\n'
                  '\n'
                  '[extensions]\n'
                  'win32text =\n'
                  '[encode]\n'
                  '** = %sencode:\n'
                  '[decode]\n'
                  '** = %sdecode:\n') % (crlf, crlf, filter, filter))
    return halt

def forbidcrlf(ui, repo, hooktype, node, **kwargs):
    return forbidnewline(ui, repo, hooktype, node, '\r\n', **kwargs)

def forbidcr(ui, repo, hooktype, node, **kwargs):
    return forbidnewline(ui, repo, hooktype, node, '\r', **kwargs)

def reposetup(ui, repo):
    if not repo.local():
        return
    for name, fn in _filters.iteritems():
        repo.adddatafilter(name, fn)

def extsetup(ui):
    # deprecated config: win32text.warn
    if ui.configbool('win32text', 'warn', True):
        ui.warn(_("win32text is deprecated: "
                  "https://mercurial-scm.org/wiki/Win32TextExtension\n"))