tests/test-histedit-fold-non-commute.t

match: making visitdir() deal with non-recursive entries

Primarily as an optimization to avoid recursing into directories that will
never have a match inside, this classifies each matcher pattern's root as
recursive or non-recursive (erring on the side of keeping it recursive,
which may lead to wasteful directory or manifest walks that yield no matches).

I measured the performance of "rootfilesin" in two repos:
- The Firefox repo with tree manifests, with
  "hg files -r . -I rootfilesin:browser".
  The browser directory contains about 3K files across 249 subdirectories.
- A specific Google-internal directory which contains 75K files across 19K
  subdirectories, with "hg files -r . -I rootfilesin:REDACTED".

I tested with both cold and warm disk caches. Cold cache was produced by
running "sync; echo 3 > /proc/sys/vm/drop_caches". Warm cache was produced
by re-running the same command a few times.

These were the results:

               Cold cache           Warm cache
             Before   After      Before   After
firefox      0m5.1s   0m2.18s   0m0.22s  0m0.14s
google3 dir  2m3.9s   0m1.57s   0m8.12s  0m0.16s

Certain extensions, notably narrowhg, can depend on this for correctness
(not trying to recurse into directories for which it has no information).

  $ . "$TESTDIR/histedit-helpers.sh"

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > histedit=
  > EOF

  $ initrepo ()
  > {
  >     hg init $1
  >     cd $1
  >     for x in a b c d e f ; do
  >         echo $x$x$x$x$x > $x
  >         hg add $x
  >     done
  >     hg ci -m 'Initial commit'
  >     for x in a b c d e f ; do
  >         echo $x > $x
  >         hg ci -m $x
  >     done
  >     echo 'I can haz no commute' > e
  >     hg ci -m 'does not commute with e'
  >     cd ..
  > }

  $ initrepo r
  $ cd r
Initial generation of the command files

  $ EDITED="$TESTTMP/editedhistory"
  $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 3 >> $EDITED
  $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 4 >> $EDITED
  $ hg log --template 'fold {node|short} {rev} {desc}\n' -r 7 >> $EDITED
  $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 5 >> $EDITED
  $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 6 >> $EDITED
  $ cat $EDITED
  pick 65a9a84f33fd 3 c
  pick 00f1c5383965 4 d
  fold 39522b764e3d 7 does not commute with e
  pick 7b4e2f4b7bcd 5 e
  pick 500cac37a696 6 f

log before edit
  $ hg log --graph
  @  changeset:   7:39522b764e3d
  |  tag:         tip
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     does not commute with e
  |
  o  changeset:   6:500cac37a696
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     f
  |
  o  changeset:   5:7b4e2f4b7bcd
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     e
  |
  o  changeset:   4:00f1c5383965
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     d
  |
  o  changeset:   3:65a9a84f33fd
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     c
  |
  o  changeset:   2:da6535b52e45
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     b
  |
  o  changeset:   1:c1f09da44841
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     a
  |
  o  changeset:   0:1715188a53c7
     user:        test
     date:        Thu Jan 01 00:00:00 1970 +0000
     summary:     Initial commit
  

edit the history
  $ hg histedit 3 --commands $EDITED 2>&1 | fixbundle
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  merging e
  warning: conflicts while merging e! (edit, then use 'hg resolve --mark')
  Fix up the change (fold 39522b764e3d)
  (hg histedit --continue to resume)

fix up
  $ echo 'I can haz no commute' > e
  $ hg resolve --mark e
  (no more unresolved files)
  continue: hg histedit --continue
  $ HGEDITOR=cat hg histedit --continue 2>&1 | fixbundle | grep -v '2 files removed'
  d
  ***
  does not commute with e
  
  
  
  HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  HG: Leave message empty to abort commit.
  HG: --
  HG: user: test
  HG: branch 'default'
  HG: changed d
  HG: changed e
  merging e
  warning: conflicts while merging e! (edit, then use 'hg resolve --mark')
  Fix up the change (pick 7b4e2f4b7bcd)
  (hg histedit --continue to resume)

just continue this time
keep the non-commuting change, and thus the pending change will be dropped
  $ hg revert -r 'p1()' e
  $ hg resolve --mark e
  (no more unresolved files)
  continue: hg histedit --continue
  $ hg diff
  $ hg histedit --continue 2>&1 | fixbundle
  7b4e2f4b7bcd: skipping changeset (no changes)

log after edit
  $ hg log --graph
  @  changeset:   5:d9cf42e54966
  |  tag:         tip
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     f
  |
  o  changeset:   4:10486af2e984
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     d
  |
  o  changeset:   3:65a9a84f33fd
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     c
  |
  o  changeset:   2:da6535b52e45
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     b
  |
  o  changeset:   1:c1f09da44841
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     a
  |
  o  changeset:   0:1715188a53c7
     user:        test
     date:        Thu Jan 01 00:00:00 1970 +0000
     summary:     Initial commit
  

contents of e
  $ hg cat e
  I can haz no commute

manifest
  $ hg manifest
  a
  b
  c
  d
  e
  f

  $ cd ..

Repeat test using "roll", not "fold". "roll" folds in changes but drops message

  $ initrepo r2
  $ cd r2

Initial generation of the command files

  $ EDITED="$TESTTMP/editedhistory.2"
  $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 3 >> $EDITED
  $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 4 >> $EDITED
  $ hg log --template 'roll {node|short} {rev} {desc}\n' -r 7 >> $EDITED
  $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 5 >> $EDITED
  $ hg log --template 'pick {node|short} {rev} {desc}\n' -r 6 >> $EDITED
  $ cat $EDITED
  pick 65a9a84f33fd 3 c
  pick 00f1c5383965 4 d
  roll 39522b764e3d 7 does not commute with e
  pick 7b4e2f4b7bcd 5 e
  pick 500cac37a696 6 f

log before edit
  $ hg log --graph
  @  changeset:   7:39522b764e3d
  |  tag:         tip
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     does not commute with e
  |
  o  changeset:   6:500cac37a696
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     f
  |
  o  changeset:   5:7b4e2f4b7bcd
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     e
  |
  o  changeset:   4:00f1c5383965
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     d
  |
  o  changeset:   3:65a9a84f33fd
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     c
  |
  o  changeset:   2:da6535b52e45
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     b
  |
  o  changeset:   1:c1f09da44841
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     a
  |
  o  changeset:   0:1715188a53c7
     user:        test
     date:        Thu Jan 01 00:00:00 1970 +0000
     summary:     Initial commit
  

edit the history
  $ hg histedit 3 --commands $EDITED 2>&1 | fixbundle
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  merging e
  warning: conflicts while merging e! (edit, then use 'hg resolve --mark')
  Fix up the change (roll 39522b764e3d)
  (hg histedit --continue to resume)

fix up
  $ echo 'I can haz no commute' > e
  $ hg resolve --mark e
  (no more unresolved files)
  continue: hg histedit --continue
  $ hg histedit --continue 2>&1 | fixbundle | grep -v '2 files removed'
  merging e
  warning: conflicts while merging e! (edit, then use 'hg resolve --mark')
  Fix up the change (pick 7b4e2f4b7bcd)
  (hg histedit --continue to resume)

just continue this time
  $ hg revert -r 'p1()' e
  $ hg resolve --mark e
  (no more unresolved files)
  continue: hg histedit --continue
  $ hg histedit --continue 2>&1 | fixbundle
  7b4e2f4b7bcd: skipping changeset (no changes)

log after edit
  $ hg log --graph
  @  changeset:   5:e7c4f5d4eb75
  |  tag:         tip
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     f
  |
  o  changeset:   4:803d1bb561fc
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     d
  |
  o  changeset:   3:65a9a84f33fd
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     c
  |
  o  changeset:   2:da6535b52e45
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     b
  |
  o  changeset:   1:c1f09da44841
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     a
  |
  o  changeset:   0:1715188a53c7
     user:        test
     date:        Thu Jan 01 00:00:00 1970 +0000
     summary:     Initial commit
  

contents of e
  $ hg cat e
  I can haz no commute

manifest
  $ hg manifest
  a
  b
  c
  d
  e
  f

description is taken from rollup target commit

  $ hg log --debug --rev 4
  changeset:   4:803d1bb561fceac3129ec778db9da249a3106fc3
  phase:       draft
  parent:      3:65a9a84f33fdeb1ad5679b3941ec885d2b24027b
  parent:      -1:0000000000000000000000000000000000000000
  manifest:    4:b068a323d969f22af1296ec6a5ea9384cef437ac
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       d e
  extra:       branch=default
  extra:       histedit_source=00f1c53839651fa5c76d423606811ea5455a79d0,39522b764e3d26103f08bd1fa2ccd3e3d7dbcf4e
  description:
  d
  
  

done with repo r2

  $ cd ..