tests/test-mq-qnew.t

match: making visitdir() deal with non-recursive entries

Primarily as an optimization to avoid recursing into directories that will
never have a match inside, this classifies each matcher pattern's root as
recursive or non-recursive (erring on the side of keeping it recursive,
which may lead to wasteful directory or manifest walks that yield no matches).

I measured the performance of "rootfilesin" in two repos:
- The Firefox repo with tree manifests, with
  "hg files -r . -I rootfilesin:browser".
  The browser directory contains about 3K files across 249 subdirectories.
- A specific Google-internal directory which contains 75K files across 19K
  subdirectories, with "hg files -r . -I rootfilesin:REDACTED".

I tested with both cold and warm disk caches. Cold cache was produced by
running "sync; echo 3 > /proc/sys/vm/drop_caches". Warm cache was produced
by re-running the same command a few times.

These were the results:

               Cold cache           Warm cache
             Before   After      Before   After
firefox      0m5.1s   0m2.18s   0m0.22s  0m0.14s
google3 dir  2m3.9s   0m1.57s   0m8.12s  0m0.16s

Certain extensions, notably narrowhg, can depend on this for correctness
(not trying to recurse into directories for which it has no information).

  $ catpatch() {
  >     cat $1 | sed -e "s/^\(# Parent \).*/\1/"
  > }
  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mq=" >> $HGRCPATH
  $ runtest() {
  >     hg init mq
  >     cd mq
  > 
  >     echo a > a
  >     hg ci -Ama
  > 
  >     echo '% qnew should refuse bad patch names'
  >     hg qnew series
  >     hg qnew status
  >     hg qnew guards
  >     hg qnew .
  >     hg qnew ..
  >     hg qnew .hgignore
  >     hg qnew .mqfoo
  >     hg qnew 'foo#bar'
  >     hg qnew 'foo:bar'
  >     hg qnew "`echo foo; echo bar`"
  > 
  >     hg qinit -c
  > 
  >     echo '% qnew with name containing slash'
  >     hg qnew foo/
  >     hg qnew foo/bar.patch
  >     hg qnew foo
  >     hg qseries
  >     hg qpop
  >     hg qdelete foo/bar.patch
  > 
  >     echo '% qnew with uncommitted changes'
  >     echo a > somefile
  >     hg add somefile
  >     hg qnew uncommitted.patch
  >     hg st
  >     hg qseries
  > 
  >     echo '% qnew implies add'
  >     hg -R .hg/patches st
  > 
  >     echo '% qnew missing'
  >     hg qnew missing.patch missing
  > 
  >     echo '% qnew -m'
  >     hg qnew -m 'foo bar' mtest.patch
  >     catpatch .hg/patches/mtest.patch
  > 
  >     echo '% qnew twice'
  >     hg qnew first.patch
  >     hg qnew first.patch
  > 
  >     touch ../first.patch
  >     hg qimport ../first.patch
  > 
  >     echo '% qnew -f from a subdirectory'
  >     hg qpop -a
  >     mkdir d
  >     cd d
  >     echo b > b
  >     hg ci -Am t
  >     echo b >> b
  >     hg st
  >     hg qnew -g -f p
  >     catpatch ../.hg/patches/p
  > 
  >     echo '% qnew -u with no username configured'
  >     HGUSER= hg qnew -u blue red
  >     catpatch ../.hg/patches/red
  > 
  >     echo '% qnew -e -u with no username configured'
  >     HGUSER= hg qnew -e -u chartreuse fucsia
  >     catpatch ../.hg/patches/fucsia
  > 
  >     echo '% fail when trying to import a merge'
  >     hg init merge
  >     cd merge
  >     touch a
  >     hg ci -Am null
  >     echo a >> a
  >     hg ci -m a
  >     hg up -r 0
  >     echo b >> a
  >     hg ci -m b
  >     hg merge -f 1
  >     hg resolve --mark a
  >     hg qnew -f merge
  > 
  >     cd ../../..
  >     rm -r mq
  > }

plain headers

  $ echo "[mq]" >> $HGRCPATH
  $ echo "plain=true" >> $HGRCPATH
  $ mkdir sandbox
  $ (cd sandbox ; runtest)
  adding a
  % qnew should refuse bad patch names
  abort: "series" cannot be used as the name of a patch
  abort: "status" cannot be used as the name of a patch
  abort: "guards" cannot be used as the name of a patch
  abort: "." cannot be used as the name of a patch
  abort: ".." cannot be used as the name of a patch
  abort: patch name cannot begin with ".hg"
  abort: patch name cannot begin with ".mq"
  abort: '#' cannot be used in the name of a patch
  abort: ':' cannot be used in the name of a patch
  abort: '\n' cannot be used in the name of a patch
  % qnew with name containing slash
  abort: path ends in directory separator: foo/ (glob)
  abort: "foo" already exists as a directory
  foo/bar.patch
  popping foo/bar.patch
  patch queue now empty
  % qnew with uncommitted changes
  uncommitted.patch
  % qnew implies add
  A .hgignore
  A series
  A uncommitted.patch
  % qnew missing
  abort: missing: * (glob)
  % qnew -m
  foo bar
  
  % qnew twice
  abort: patch "first.patch" already exists
  abort: patch "first.patch" already exists
  % qnew -f from a subdirectory
  popping first.patch
  popping mtest.patch
  popping uncommitted.patch
  patch queue now empty
  adding d/b
  M d/b
  diff --git a/d/b b/d/b
  --- a/d/b
  +++ b/d/b
  @@ -1,1 +1,2 @@
   b
  +b
  % qnew -u with no username configured
  From: blue
  
  % qnew -e -u with no username configured
  From: chartreuse
  
  % fail when trying to import a merge
  adding a
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  created new head
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  (no more unresolved files)
  abort: cannot manage merge changesets
  $ rm -r sandbox

hg headers

  $ echo "plain=false" >> $HGRCPATH
  $ mkdir sandbox
  $ (cd sandbox ; runtest)
  adding a
  % qnew should refuse bad patch names
  abort: "series" cannot be used as the name of a patch
  abort: "status" cannot be used as the name of a patch
  abort: "guards" cannot be used as the name of a patch
  abort: "." cannot be used as the name of a patch
  abort: ".." cannot be used as the name of a patch
  abort: patch name cannot begin with ".hg"
  abort: patch name cannot begin with ".mq"
  abort: '#' cannot be used in the name of a patch
  abort: ':' cannot be used in the name of a patch
  abort: '\n' cannot be used in the name of a patch
  % qnew with name containing slash
  abort: path ends in directory separator: foo/ (glob)
  abort: "foo" already exists as a directory
  foo/bar.patch
  popping foo/bar.patch
  patch queue now empty
  % qnew with uncommitted changes
  uncommitted.patch
  % qnew implies add
  A .hgignore
  A series
  A uncommitted.patch
  % qnew missing
  abort: missing: * (glob)
  % qnew -m
  # HG changeset patch
  # Parent 
  foo bar
  
  % qnew twice
  abort: patch "first.patch" already exists
  abort: patch "first.patch" already exists
  % qnew -f from a subdirectory
  popping first.patch
  popping mtest.patch
  popping uncommitted.patch
  patch queue now empty
  adding d/b
  M d/b
  # HG changeset patch
  # Parent 
  
  diff --git a/d/b b/d/b
  --- a/d/b
  +++ b/d/b
  @@ -1,1 +1,2 @@
   b
  +b
  % qnew -u with no username configured
  # HG changeset patch
  # User blue
  # Parent 
  
  % qnew -e -u with no username configured
  # HG changeset patch
  # User chartreuse
  # Parent 
  
  % fail when trying to import a merge
  adding a
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  created new head
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  (no more unresolved files)
  abort: cannot manage merge changesets
  $ rm -r sandbox

Test saving last-message.txt

  $ hg init repo
  $ cd repo

  $ cat > $TESTTMP/commitfailure.py <<EOF
  > from mercurial import error
  > def reposetup(ui, repo):
  >     class commitfailure(repo.__class__):
  >         def commit(self, *args, **kwargs):
  >             raise error.Abort('emulating unexpected abort')
  >     repo.__class__ = commitfailure
  > EOF
  $ cat >> .hg/hgrc <<EOF
  > [extensions]
  > # this failure occurs before editor invocation
  > commitfailure = $TESTTMP/commitfailure.py
  > EOF

  $ cat > $TESTTMP/editor.sh << EOF
  > echo "==== before editing"
  > cat \$1
  > echo "===="
  > echo "test saving last-message.txt" >> \$1
  > EOF

(test that editor is not invoked before transaction starting)

  $ rm -f .hg/last-message.txt
  $ HGEDITOR="sh $TESTTMP/editor.sh" hg qnew -e patch
  abort: emulating unexpected abort
  [255]
  $ test -f .hg/last-message.txt
  [1]

(test that editor is invoked and commit message is saved into
"last-message.txt")

  $ cat >> .hg/hgrc <<EOF
  > [extensions]
  > commitfailure = !
  > [hooks]
  > # this failure occurs after editor invocation
  > pretxncommit.unexpectedabort = false
  > EOF

  $ rm -f .hg/last-message.txt
  $ hg status
  $ HGEDITOR="sh $TESTTMP/editor.sh" hg qnew -e patch
  ==== before editing
  
  
  HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  HG: Leave message empty to use default message.
  HG: --
  HG: user: test
  HG: branch 'default'
  HG: no files changed
  ====
  note: commit message saved in .hg/last-message.txt
  transaction abort!
  rollback completed
  abort: pretxncommit.unexpectedabort hook exited with status 1
  [255]
  $ cat .hg/last-message.txt
  
  
  test saving last-message.txt

  $ cat >> .hg/hgrc <<EOF
  > [hooks]
  > pretxncommit.unexpectedabort =
  > EOF

#if unix-permissions

Test handling default message with the patch filename with tail whitespaces

  $ cat > $TESTTMP/editor.sh << EOF
  > echo "==== before editing"
  > cat \$1
  > echo "===="
  > echo "[mq]: patch        " > \$1
  > EOF

  $ rm -f .hg/last-message.txt
  $ hg status
  $ HGEDITOR="sh $TESTTMP/editor.sh" hg qnew -e "patch "
  ==== before editing
  
  
  HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  HG: Leave message empty to use default message.
  HG: --
  HG: user: test
  HG: branch 'default'
  HG: no files changed
  ====
  $ cat ".hg/patches/patch "
  # HG changeset patch
  # Parent  0000000000000000000000000000000000000000
  

  $ cd ..

#endif