tests/test-ssh-clone-r.t

match: making visitdir() deal with non-recursive entries

Primarily as an optimization to avoid recursing into directories that will
never have a match inside, this classifies each matcher pattern's root as
recursive or non-recursive (erring on the side of keeping it recursive,
which may lead to wasteful directory or manifest walks that yield no matches).

I measured the performance of "rootfilesin" in two repos:
- The Firefox repo with tree manifests, with
  "hg files -r . -I rootfilesin:browser".
  The browser directory contains about 3K files across 249 subdirectories.
- A specific Google-internal directory which contains 75K files across 19K
  subdirectories, with "hg files -r . -I rootfilesin:REDACTED".

I tested with both cold and warm disk caches. Cold cache was produced by
running "sync; echo 3 > /proc/sys/vm/drop_caches". Warm cache was produced
by re-running the same command a few times.

These were the results:

               Cold cache           Warm cache
             Before   After      Before   After
firefox      0m5.1s   0m2.18s   0m0.22s  0m0.14s
google3 dir  2m3.9s   0m1.57s   0m8.12s  0m0.16s

Certain extensions, notably narrowhg, can depend on this for correctness
(not trying to recurse into directories for which it has no information).

This test tries to exercise the ssh functionality with a dummy script

creating 'remote' repo

  $ hg init remote
  $ cd remote
  $ hg unbundle "$TESTDIR/bundles/remote.hg"
  adding changesets
  adding manifests
  adding file changes
  added 9 changesets with 7 changes to 4 files (+1 heads)
  (run 'hg heads' to see heads, 'hg merge' to merge)
  $ hg up tip
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd ..

clone remote via stream

  $ for i in 0 1 2 3 4 5 6 7 8; do
  >    hg clone -e "python \"$TESTDIR/dummyssh\"" --uncompressed -r "$i" ssh://user@dummy/remote test-"$i"
  >    if cd test-"$i"; then
  >       hg verify
  >       cd ..
  >    fi
  > done
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 1 changesets, 1 total revisions
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 2 changesets, 2 total revisions
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 3 changesets, 3 total revisions
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 4 changes to 1 files
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 4 changesets, 4 total revisions
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 2 changesets, 2 total revisions
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 3 changesets, 3 total revisions
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 5 changes to 2 files
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 4 changesets, 5 total revisions
  adding changesets
  adding manifests
  adding file changes
  added 5 changesets with 6 changes to 3 files
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  3 files, 5 changesets, 6 total revisions
  adding changesets
  adding manifests
  adding file changes
  added 5 changesets with 5 changes to 2 files
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 5 changesets, 5 total revisions
  $ cd test-8
  $ hg pull ../test-7
  pulling from ../test-7
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 2 changes to 3 files (+1 heads)
  (run 'hg heads' to see heads, 'hg merge' to merge)
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  4 files, 9 changesets, 7 total revisions
  $ cd ..
  $ cd test-1
  $ hg pull -e "python \"$TESTDIR/dummyssh\"" -r 4 ssh://user@dummy/remote
  pulling from ssh://user@dummy/remote
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 0 changes to 0 files (+1 heads)
  (run 'hg heads' to see heads, 'hg merge' to merge)
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 3 changesets, 2 total revisions
  $ hg pull -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote
  pulling from ssh://user@dummy/remote
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 5 changes to 4 files
  (run 'hg update' to get a working copy)
  $ cd ..
  $ cd test-2
  $ hg pull -e "python \"$TESTDIR/dummyssh\"" -r 5 ssh://user@dummy/remote
  pulling from ssh://user@dummy/remote
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 0 changes to 0 files (+1 heads)
  (run 'hg heads' to see heads, 'hg merge' to merge)
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 5 changesets, 3 total revisions
  $ hg pull -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote
  pulling from ssh://user@dummy/remote
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 4 changes to 4 files
  (run 'hg update' to get a working copy)
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  4 files, 9 changesets, 7 total revisions

  $ cd ..