annotate tests/test-pull-branch.t @ 33116:6c113a7dec52

tests: use the system hg for examining the local repository

Most test scripts use "hg" to interact with a temporary test repository.
However a few tests also want to run hg commands to interact with the local
repository containing the mercurial source code.  Notably, many of the
test-check-* tests want to check local files and commit messages.

These tests were previously using the version of hg being tested to query the
source repository.  However, this will fail if the source repository requires
extensions or other settings not supported by the version of mercurial being
tested.  The source repository was typically initially cloned using the system
hg installation, so we should use the system hg installation to query it.

There was already a helpers-testrepo.sh script designed to help cope with
different requirements for the source repository versus the test repositories.
However, it only handled the evolve extension.  This new behavior works with
any extensions that are different between the system installation and the test
installation.

  $ hg init t
  $ cd t
  $ echo 1 > foo
  $ hg ci -Am1 # 0
  adding foo
  $ hg branch branchA
  marked working directory as branch branchA
  (branches are permanent and global, did you want a bookmark?)
  $ echo a1 > foo
  $ hg ci -ma1 # 1

  $ cd ..
  $ hg init tt
  $ cd tt
  $ hg pull ../t
  pulling from ../t
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files
  (run 'hg update' to get a working copy)
  $ hg up branchA
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cd ../t
  $ echo a2 > foo
  $ hg ci -ma2 # 2

Create branch B:

  $ hg up 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg branch branchB
  marked working directory as branch branchB
  $ echo b1 > foo
  $ hg ci -mb1 # 3

  $ cd ../tt

A new branch is there

  $ hg pull -u ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files (+1 heads)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Develop both branches:

  $ cd ../t
  $ hg up branchA
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a3 > foo
  $ hg ci -ma3 # 4
  $ hg up branchB
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b2 > foo
  $ hg ci -mb2 # 5

  $ cd ../tt

Should succeed, no new heads:

  $ hg pull -u ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Add a head on other branch:

  $ cd ../t
  $ hg up branchA
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a4 > foo
  $ hg ci -ma4 # 6
  $ hg up branchB
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b3.1 > foo
  $ hg ci -m b3.1 # 7
  $ hg up 5
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b3.2 > foo
  $ hg ci -m b3.2 # 8
  created new head

  $ cd ../tt

Should succeed because there is only one head on our branch:

  $ hg pull -u ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files (+1 heads)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cd ../t
  $ hg up -C branchA
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a5.1 > foo
  $ hg ci -ma5.1 # 9
  $ hg up 6
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a5.2 > foo
  $ hg ci -ma5.2 # 10
  created new head
  $ hg up 7
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b4.1 > foo
  $ hg ci -m b4.1 # 11
  $ hg up -C 8
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b4.2 > foo
  $ hg ci -m b4.2 # 12

  $ cd ../tt

  $ hg pull -u ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 4 changes to 1 files (+1 heads)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updated to "d740e1a584e7: a5.2"
  1 other heads for branch "branchA"

Make changes on new branch on tt

  $ hg up 6
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg branch branchC
  marked working directory as branch branchC
  $ echo b1 > bar
  $ hg ci -Am "commit on branchC on tt"
  adding bar

Make changes on default branch on t

  $ cd ../t
  $ hg up -C default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a1 > bar
  $ hg ci -Am "commit on default on t"
  adding bar

Pull branchC from tt

  $ hg pull ../tt
  pulling from ../tt
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  (run 'hg heads' to see heads)

Make changes on default and branchC on tt

  $ cd ../tt
  $ hg pull ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  (run 'hg heads' to see heads)
  $ hg up -C default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a1 > bar1
  $ hg ci -Am "commit on default on tt"
  adding bar1
  $ hg up branchC
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo a1 > bar2
  $ hg ci -Am "commit on branchC on tt"
  adding bar2

Make changes on default and branchC on t

  $ cd ../t
  $ hg up default
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a1 > bar3
  $ hg ci -Am "commit on default on t"
  adding bar3
  $ hg up branchC
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo a1 > bar4
  $ hg ci -Am "commit on branchC on tt"
  adding bar4

Pull from tt

  $ hg pull ../tt
  pulling from ../tt
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files (+2 heads)
  (run 'hg heads .' to see heads, 'hg merge' to merge)

  $ cd ..