annotate tests/test-hgignore.t @ 48670:6d2ddea0721a stable

stream-clone: filter possible missing requirements using all supported one

The `supportedformat` requirements is missing some important requirements and it
seems better to filter out with all requirements we know, not just an
"arbitrary" subset.

The `supportedformat` set is lacking some important requirements (for example
`revlog-compression-zstd`). This is getting fixed on default (for Mercurial 6.1)

However, fixing that in 6.1 means the stream requirements sent over the wire
will contains more items. And if we don't apply this fix on older version, they
might end up complaining about lacking support for feature they actually support
for years.

This patch does not fix the deeper problem (advertised stream requirement
lacking some of them), but focus on the trivial part : Lets use the full set of
supported requirement for looking for unsupported ones.

This patch should be simple to backport to older version of Mercurial and
packager should be encouraged to do so.

This is a graft of d9017df70135 from default.

Differential Revision: https://phab.mercurial-scm.org/D12091

#testcases dirstate-v1 dirstate-v2

#if dirstate-v2
  $ cat >> $HGRCPATH << EOF
  > [format]
  > exp-rc-dirstate-v2=1
  > [storage]
  > dirstate-v2.slow-path=allow
  > EOF
#endif

  $ hg init ignorerepo
  $ cd ignorerepo

debugignore with no hgignore should be deterministic:
  $ hg debugignore
  <nevermatcher>

Issue562: .hgignore requires newline at end:

  $ touch foo
  $ touch bar
  $ touch baz
  $ cat > makeignore.py <<EOF
  > f = open(".hgignore", "w")
  > f.write("ignore\n")
  > f.write("foo\n")
  > # No EOL here
  > f.write("bar")
  > f.close()
  > EOF

  $ "$PYTHON" makeignore.py

Should display baz only:

  $ hg status
  ? baz

  $ rm foo bar baz .hgignore makeignore.py

  $ touch a.o
  $ touch a.c
  $ touch syntax
  $ mkdir dir
  $ touch dir/a.o
  $ touch dir/b.o
  $ touch dir/c.o

  $ hg add dir/a.o
  $ hg commit -m 0
  $ hg add dir/b.o

  $ hg status
  A dir/b.o
  ? a.c
  ? a.o
  ? dir/c.o
  ? syntax

  $ echo "*.o" > .hgignore
  $ hg status
  abort: $TESTTMP/ignorerepo/.hgignore: invalid pattern (relre): *.o (glob)
  [255]

Ensure given files are relative to cwd

  $ echo "dir/.*\.o" > .hgignore
  $ hg status -i
  I dir/c.o

  $ hg debugignore dir/c.o dir/missing.o
  dir/c.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
  dir/missing.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
  $ cd dir
  $ hg debugignore c.o missing.o
  c.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
  missing.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)

For icasefs, inexact matches also work, except for missing files

#if icasefs
  $ hg debugignore c.O missing.O
  c.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: 'dir/.*\.o') (glob)
  missing.O is not ignored
#endif

  $ cd ..

  $ echo ".*\.o" > .hgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? syntax

Ensure that comments work:

  $ touch 'foo#bar' 'quux#' 'quu0#'
#if no-windows
  $ touch 'baz\' 'baz\wat' 'ba0\#wat' 'ba1\\' 'ba1\\wat' 'quu0\'
#endif

  $ cat <<'EOF' >> .hgignore
  > # full-line comment
  >   # whitespace-only comment line
  > syntax# pattern, no whitespace, then comment
  > a.c  # pattern, then whitespace, then comment
  > baz\\# # (escaped) backslash, then comment
  > ba0\\\#w # (escaped) backslash, escaped comment character, then comment
  > ba1\\\\# # (escaped) backslashes, then comment
  > foo\#b # escaped comment character
  > quux\## escaped comment character at end of name
  > EOF
  $ hg status
  A dir/b.o
  ? .hgignore
  ? quu0#
  ? quu0\ (no-windows !)

  $ cat <<'EOF' > .hgignore
  > .*\.o
  > syntax: glob
  > syntax# pattern, no whitespace, then comment
  > a.c  # pattern, then whitespace, then comment
  > baz\\#* # (escaped) backslash, then comment
  > ba0\\\#w* # (escaped) backslash, escaped comment character, then comment
  > ba1\\\\#* # (escaped) backslashes, then comment
  > foo\#b* # escaped comment character
  > quux\## escaped comment character at end of name
  > quu0[\#]# escaped comment character inside [...]
  > EOF
  $ hg status
  A dir/b.o
  ? .hgignore
  ? ba1\\wat (no-windows !)
  ? baz\wat (no-windows !)
  ? quu0\ (no-windows !)

  $ rm 'foo#bar' 'quux#' 'quu0#'
#if no-windows
  $ rm 'baz\' 'baz\wat' 'ba0\#wat' 'ba1\\' 'ba1\\wat' 'quu0\'
#endif

Check that '^\.' does not ignore the root directory:

  $ echo "^\." > .hgignore
  $ hg status
  A dir/b.o
  ? a.c
  ? a.o
  ? dir/c.o
  ? syntax

Test that patterns from ui.ignore options are read:

  $ echo > .hgignore
  $ cat >> $HGRCPATH << EOF
  > [ui]
  > ignore.other = $TESTTMP/ignorerepo/.hg/testhgignore
  > EOF
  $ echo "glob:**.o" > .hg/testhgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? syntax

empty out testhgignore
  $ echo > .hg/testhgignore

Test relative ignore path (issue4473):

  $ cat >> $HGRCPATH << EOF
  > [ui]
  > ignore.relative = .hg/testhgignorerel
  > EOF
  $ echo "glob:*.o" > .hg/testhgignorerel
  $ cd dir
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? syntax
  $ hg debugignore
  <includematcher includes='.*\\.o(?:/|$)'>

  $ cd ..
  $ echo > .hg/testhgignorerel
  $ echo "syntax: glob" > .hgignore
  $ echo "re:.*\.o" >> .hgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? syntax

  $ echo "syntax: invalid" > .hgignore
  $ hg status
  $TESTTMP/ignorerepo/.hgignore: ignoring invalid syntax 'invalid'
  A dir/b.o
  ? .hgignore
  ? a.c
  ? a.o
  ? dir/c.o
  ? syntax

  $ echo "syntax: glob" > .hgignore
  $ echo "*.o" >> .hgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? syntax

  $ echo "relglob:syntax*" > .hgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? a.o
  ? dir/c.o

  $ echo "relglob:*" > .hgignore
  $ hg status
  A dir/b.o

  $ cd dir
  $ hg status .
  A b.o

  $ hg debugignore
  <includematcher includes='.*(?:/|$)'>

  $ hg debugignore b.o
  b.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 1: '*') (glob)

  $ cd ..

Check patterns that match only the directory

"(fsmonitor !)" below assumes that fsmonitor is enabled with
"walk_on_invalidate = false" (default), which doesn't involve
re-walking whole repository at detection of .hgignore change.

  $ echo "^dir\$" > .hgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? a.o
  ? dir/c.o (fsmonitor !)
  ? syntax

Check recursive glob pattern matches no directories (dir/**/c.o matches dir/c.o)

  $ echo "syntax: glob" > .hgignore
  $ echo "dir/**/c.o" >> .hgignore
  $ touch dir/c.o
  $ mkdir dir/subdir
  $ touch dir/subdir/c.o
  $ hg status
  A dir/b.o
  ? .hgignore
  ? a.c
  ? a.o
  ? syntax
  $ hg debugignore a.c
  a.c is not ignored
  $ hg debugignore dir/c.o
  dir/c.o is ignored
  (ignore rule in $TESTTMP/ignorerepo/.hgignore, line 2: 'dir/**/c.o') (glob)

Check rooted globs

  $ hg purge --all --config extensions.purge=
  $ echo "syntax: rootglob" > .hgignore
  $ echo "a/*.ext" >> .hgignore
  $ for p in a b/a aa; do mkdir -p $p; touch $p/b.ext; done
  $ hg status -A 'set:**.ext'
  ? aa/b.ext
  ? b/a/b.ext
  I a/b.ext

Check using 'include:' in ignore file

  $ hg purge --all --config extensions.purge=
  $ touch foo.included

  $ echo ".*.included" > otherignore
  $ hg status -I "include:otherignore"
  ? foo.included

  $ echo "include:otherignore" >> .hgignore
  $ hg status
  A dir/b.o
  ? .hgignore
  ? otherignore

Check recursive uses of 'include:'

  $ echo "include:nested/ignore" >> otherignore
  $ mkdir nested nested/more
  $ echo "glob:*ignore" > nested/ignore
  $ echo "rootglob:a" >> nested/ignore
  $ touch a nested/a nested/more/a
  $ hg status
  A dir/b.o
  ? nested/a
  ? nested/more/a
  $ rm a nested/a nested/more/a

  $ cp otherignore goodignore
  $ echo "include:badignore" >> otherignore
  $ hg status
  skipping unreadable pattern file 'badignore': $ENOENT$
  A dir/b.o

  $ mv goodignore otherignore

Check using 'include:' while in a non-root directory

  $ cd ..
  $ hg -R ignorerepo status
  A dir/b.o
  $ cd ignorerepo

Check including subincludes

  $ hg revert -q --all
  $ hg purge --all --config extensions.purge=
  $ echo ".hgignore" > .hgignore
  $ mkdir dir1 dir2
  $ touch dir1/file1 dir1/file2 dir2/file1 dir2/file2
  $ echo "subinclude:dir2/.hgignore" >> .hgignore
  $ echo "glob:file*2" > dir2/.hgignore
  $ hg status
  ? dir1/file1
  ? dir1/file2
  ? dir2/file1

Check including subincludes with other patterns

  $ echo "subinclude:dir1/.hgignore" >> .hgignore

  $ mkdir dir1/subdir
  $ touch dir1/subdir/file1
  $ echo "rootglob:f?le1" > dir1/.hgignore
  $ hg status
  ? dir1/file2
  ? dir1/subdir/file1
  ? dir2/file1
  $ rm dir1/subdir/file1

  $ echo "regexp:f.le1" > dir1/.hgignore
  $ hg status
  ? dir1/file2
  ? dir2/file1

Check multiple levels of sub-ignores

  $ touch dir1/subdir/subfile1 dir1/subdir/subfile3 dir1/subdir/subfile4
  $ echo "subinclude:subdir/.hgignore" >> dir1/.hgignore
  $ echo "glob:subfil*3" >> dir1/subdir/.hgignore

  $ hg status
  ? dir1/file2
  ? dir1/subdir/subfile4
  ? dir2/file1

Check include subignore at the same level

  $ mv dir1/subdir/.hgignore dir1/.hgignoretwo
  $ echo "regexp:f.le1" > dir1/.hgignore
  $ echo "subinclude:.hgignoretwo" >> dir1/.hgignore
  $ echo "glob:file*2" > dir1/.hgignoretwo

  $ hg status | grep file2
  [1]
  $ hg debugignore dir1/file2
  dir1/file2 is ignored
  (ignore rule in dir2/.hgignore, line 1: 'file*2')

#if windows

Windows paths are accepted on input

  $ rm dir1/.hgignore
  $ echo "dir1/file*" >> .hgignore
  $ hg debugignore "dir1\file2"
  dir1/file2 is ignored
  (ignore rule in $TESTTMP\ignorerepo\.hgignore, line 4: 'dir1/file*')
  $ hg up -qC .

#endif

#if dirstate-v2 rust

Check the hash of ignore patterns written in the dirstate
This is an optimization that is only relevant when using the Rust extensions

  $ hg status > /dev/null
  $ cat .hg/testhgignore .hg/testhgignorerel .hgignore dir2/.hgignore dir1/.hgignore dir1/.hgignoretwo | $TESTDIR/f --sha1
  sha1=6e315b60f15fb5dfa02be00f3e2c8f923051f5ff
  $ hg debugdirstateignorepatternshash
  6e315b60f15fb5dfa02be00f3e2c8f923051f5ff

  $ echo rel > .hg/testhgignorerel
  $ hg status > /dev/null
  $ cat .hg/testhgignore .hg/testhgignorerel .hgignore dir2/.hgignore dir1/.hgignore dir1/.hgignoretwo | $TESTDIR/f --sha1
  sha1=dea19cc7119213f24b6b582a4bae7b0cb063e34e
  $ hg debugdirstateignorepatternshash
  dea19cc7119213f24b6b582a4bae7b0cb063e34e

#endif