annotate tests/test-merge-exec.t @ 48652:6fd9a17c32ab

requirements: add an official `REVLOG_COMPRESSION_ZSTD` const

Such constant was missing and its value was missing from the set of requirements
that needs to be preserved through stream clone. This did not had any
consequence yet as the "bundle 2 does not filter its requirements" is shadowing
the issue.

However we are now in a situation where we can fix this issue. So lets do it
next.

With the preparation work on test, changing the streamreqs value only impact two
tests, where checking the full value seems to remains relevant.

Important note: Since older version of Mercurial used the old `supportedformat`
class attribute to check for stream requirement they supported, older version
will consider this requirements to prevent them from using streaming clone. Even
as they support this requirements for years. Pack for stable will be send to fix
it, but they will have to be backported to older version if needed.

Differential Revision: https://phab.mercurial-scm.org/D12083

===============================================
Testing merge involving change to the exec flag
===============================================

#require execbit

Initial setup
==============


  $ hg init base-repo
  $ cd base-repo
  $ cat << EOF > a
  > 1
  > 2
  > 3
  > 4
  > 5
  > 6
  > 7
  > 8
  > 9
  > EOF
  $ touch b
  $ hg add a b
  $ hg commit -m "initial commit"
  $ cd ..

  $ hg init base-exec
  $ cd base-exec
  $ cat << EOF > a
  > 1
  > 2
  > 3
  > 4
  > 5
  > 6
  > 7
  > 8
  > 9
  > EOF
  $ chmod +x a
  $ touch b
  $ hg add a b
  $ hg commit -m "initial commit"
  $ cd ..

Testing merging mode change
===========================

Adding the flag
---------------

setup

Change on one side, executable bit on the other

  $ hg clone base-repo simple-merge-repo
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd simple-merge-repo
  $ chmod +x a
  $ hg ci -m "make a executable, no change"
  $ [ -x a ] || echo "executable bit not recorded"
  $ hg up ".^"
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat << EOF > a
  > 1
  > 2
  > 3
  > 4
  > 5
  > 6
  > 7
  > x
  > 9
  > EOF
  $ hg commit -m "edit end of file"
  created new head

merge them (from the update side)

  $ hg merge 'desc("make a executable, no change")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st
  M a
  $ [ -x a ] || echo "executable bit lost"

merge them (from the chmod side)

  $ hg up -C 'desc("make a executable, no change")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg merge 'desc("edit end of file")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st
  M a
  $ [ -x a ] || echo "executable bit lost"


  $ cd ..


Removing the flag
-----------------

Change on one side, executable bit on the other

  $ hg clone base-exec simple-merge-repo-removal
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd simple-merge-repo-removal
  $ chmod -x a
  $ hg ci -m "make a non-executable, no change"
  $ [ -x a ] && echo "executable bit not removed"
  [1]
  $ hg up ".^"
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat << EOF > a
  > 1
  > 2
  > 3
  > 4
  > 5
  > 6
  > 7
  > x
  > 9
  > EOF
  $ hg commit -m "edit end of file"
  created new head

merge them (from the update side)

  $ hg merge 'desc("make a non-executable, no change")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st
  M a
  $ [ -x a ] && echo "executable bit not removed"
  [1]

merge them (from the chmod side)

  $ hg up -C 'desc("make a non-executable, no change")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg merge 'desc("edit end of file")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st
  M a
  $ [ -x a ] && echo "executable bit not removed"
  [1]


  $ cd ..

Testing merging mode change with rename
=======================================

Adding the flag
---------------

  $ hg clone base-repo rename-merge-repo
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd rename-merge-repo

make "a" executable on one side

  $ chmod +x a
  $ hg status
  M a
  $ hg ci -m "make a executable"
  $ [ -x a ] || echo "executable bit not recorded"
  $ hg up ".^"
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

make "a" renamed on the other side

  $ hg mv a z
  $ hg st --copies
  A z
    a
  R a
  $ hg ci -m "rename a to z"
  created new head

merge them (from the rename side)

  $ hg merge 'desc("make a executable")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M z
    a
  $ [ -x z ] || echo "executable bit lost"

merge them (from the chmod side)

  $ hg up -C 'desc("make a executable")'
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge 'desc("rename a to z")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M z
    a
  R a
  $ [ -x z ] || echo "executable bit lost"


  $ cd ..

Removing the flag
-----------------

  $ hg clone base-exec rename-merge-repo-removal
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd rename-merge-repo-removal

make "a" non-executable on one side

  $ chmod -x a
  $ hg status
  M a
  $ hg ci -m "make a non-executable"
  $ [ -x a ] && echo "executable bit not removed"
  [1]
  $ hg up ".^"
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

make "a" renamed on the other side

  $ hg mv a z
  $ hg st --copies
  A z
    a
  R a
  $ hg ci -m "rename a to z"
  created new head

merge them (from the rename side)

  $ hg merge 'desc("make a non-executable")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M z
    a
  $ [ -x z ] && echo "executable bit not removed"
  [1]

merge them (from the chmod side)

  $ hg up -C 'desc("make a non-executable")'
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge 'desc("rename a to z")'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M z
    a
  R a
  $ [ -x z ] && echo "executable bit not removed"
  [1]


  $ cd ..


Testing merging mode change with rename + modification on both side
===================================================================


Adding the flag
---------------

  $ hg clone base-repo rename+mod-merge-repo
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd rename+mod-merge-repo

make "a" executable on one side

  $ chmod +x a
  $ cat << EOF > a
  > 1
  > x
  > 3
  > 4
  > 5
  > 6
  > 7
  > 8
  > 9
  > EOF
  $ hg status
  M a
  $ hg ci -m "make a executable, and change start"
  $ [ -x a ] || echo "executable bit not recorded"
  $ hg up ".^"
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

make "a" renamed on the other side

  $ hg mv a z
  $ hg st --copies
  A z
    a
  R a
  $ cat << EOF > z
  > 1
  > 2
  > 3
  > 4
  > 5
  > 6
  > 7
  > x
  > 9
  > EOF
  $ hg ci -m "rename a to z, and change end"
  created new head

merge them (from the rename side)

  $ hg merge 'desc("make a executable")'
  merging z and a to z
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M z
    a
  $ [ -x z ] || echo "executable bit lost"

merge them (from the chmod side)

  $ hg up -C 'desc("make a executable")'
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge 'desc("rename a to z")'
  merging a and z to z
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M z
    a
  R a
  $ [ -x z ] || echo "executable bit lost"

  $ cd ..

Removing the flag
-----------------

  $ hg clone base-exec rename+mod-merge-repo-removal
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd rename+mod-merge-repo-removal

make "a" non-executable on one side

  $ chmod -x a
  $ cat << EOF > a
  > 1
  > x
  > 3
  > 4
  > 5
  > 6
  > 7
  > 8
  > 9
  > EOF
  $ hg status
  M a
  $ hg ci -m "make a non-executable, and change start"
  $ [ -x z ] && echo "executable bit not removed"
  [1]
  $ hg up ".^"
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

make "a" renamed on the other side

  $ hg mv a z
  $ hg st --copies
  A z
    a
  R a
  $ cat << EOF > z
  > 1
  > 2
  > 3
  > 4
  > 5
  > 6
  > 7
  > x
  > 9
  > EOF
  $ hg ci -m "rename a to z, and change end"
  created new head

merge them (from the rename side)

  $ hg merge 'desc("make a non-executable")'
  merging z and a to z
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M z
    a
  $ [ -x z ] && echo "executable bit not removed"
  [1]

merge them (from the chmod side)

  $ hg up -C 'desc("make a non-executable")'
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge 'desc("rename a to z")'
  merging a and z to z
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg st --copies
  M z
    a
  R a
  $ [ -x z ] && echo "executable bit not removed"
  [1]

  $ cd ..