doc/hgrc.5.txt

bisect: slightly improve the help message

HGRC(5)
=======
Bryan O'Sullivan <[e-mail]>

NAME
----
hgrc - configuration files for Mercurial

SYNOPSIS
--------

The Mercurial system uses a set of configuration files to control
aspects of its behaviour.

FILES
-----

Mercurial reads configuration data from several files, if they exist.
The names of these files depend on the system on which Mercurial is
installed. Windows registry keys contain PATH-like strings, every
part must reference a Mercurial.ini file or be a directory where *.rc
files will be read.

(Unix)    <install-root>/etc/mercurial/hgrc.d/*.rc::
(Unix)    <install-root>/etc/mercurial/hgrc::
    Per-installation configuration files, searched for in the
    directory where Mercurial is installed.  For example, if installed
    in /shared/tools, Mercurial will look in
    /shared/tools/etc/mercurial/hgrc.  Options in these files apply to
    all Mercurial commands executed by any user in any directory.

(Unix)    /etc/mercurial/hgrc.d/*.rc::
(Unix)    /etc/mercurial/hgrc::
(Windows) HKEY_LOCAL_MACHINE\SOFTWARE\Mercurial::
  or::
(Windows) C:\Mercurial\Mercurial.ini::
    Per-system configuration files, for the system on which Mercurial
    is running.  Options in these files apply to all Mercurial
    commands executed by any user in any directory.  Options in these
    files override per-installation options.

(Unix)    $HOME/.hgrc::
(Windows) C:\Documents and Settings\USERNAME\Mercurial.ini::
(Windows) $HOME\Mercurial.ini::
    Per-user configuration file, for the user running Mercurial.
    Options in this file apply to all Mercurial commands executed by
    any user in any directory.  Options in this file override
    per-installation and per-system options.
    On Windows system, one of these is chosen exclusively according
    to definition of HOME environment variable.

(Unix, Windows) <repo>/.hg/hgrc::
    Per-repository configuration options that only apply in a
    particular repository.  This file is not version-controlled, and
    will not get transferred during a "clone" operation.  Options in
    this file override options in all other configuration files.
    On Unix, most of this file will be ignored if it doesn't belong
    to a trusted user or to a trusted group.  See the documentation
    for the trusted section below for more details.

SYNTAX
------

A configuration file consists of sections, led by a "[section]" header
and followed by "name: value" entries; "name=value" is also accepted.

    [spam]
    eggs=ham
    green=
       eggs

Each line contains one entry.  If the lines that follow are indented,
they are treated as continuations of that entry.

Leading whitespace is removed from values.  Empty lines are skipped.

The optional values can contain format strings which refer to other
values in the same section, or values in a special DEFAULT section.

Lines beginning with "#" or ";" are ignored and may be used to provide
comments.

SECTIONS
--------

This section describes the different sections that may appear in a
Mercurial "hgrc" file, the purpose of each section, its possible
keys, and their possible values.

decode/encode::
  Filters for transforming files on checkout/checkin. This would
  typically be used for newline processing or other
  localization/canonicalization of files.

  Filters consist of a filter pattern followed by a filter command.
  Filter patterns are globs by default, rooted at the repository
  root.  For example, to match any file ending in ".txt" in the root
  directory only, use the pattern "*.txt".  To match any file ending
  in ".c" anywhere in the repository, use the pattern "**.c".

  The filter command can start with a specifier, either "pipe:" or
  "tempfile:".  If no specifier is given, "pipe:" is used by default.

  A "pipe:" command must accept data on stdin and return the
  transformed data on stdout.

  Pipe example:

    [encode]
    # uncompress gzip files on checkin to improve delta compression
    # note: not necessarily a good idea, just an example
    *.gz = pipe: gunzip

    [decode]
    # recompress gzip files when writing them to the working dir (we
    # can safely omit "pipe:", because it's the default)
    *.gz = gzip

  A "tempfile:" command is a template.  The string INFILE is replaced
  with the name of a temporary file that contains the data to be
  filtered by the command.  The string OUTFILE is replaced with the
  name of an empty temporary file, where the filtered data must be
  written by the command.

  NOTE: the tempfile mechanism is recommended for Windows systems,
  where the standard shell I/O redirection operators often have
  strange effects and may corrupt the contents of your files.

  The most common usage is for LF <-> CRLF translation on Windows.
  For this, use the "smart" convertors which check for binary files:

    [extensions]
    hgext.win32text =
    [encode]
    ** = cleverencode:
    [decode]
    ** = cleverdecode:

  or if you only want to translate certain files:

    [extensions]
    hgext.win32text =
    [encode]
    **.txt = dumbencode:
    [decode]
    **.txt = dumbdecode:

defaults::
  Use the [defaults] section to define command defaults, i.e. the
  default options/arguments to pass to the specified commands.

  The following example makes 'hg log' run in verbose mode, and
  'hg status' show only the modified files, by default.

    [defaults]
    log = -v
    status = -m

  The actual commands, instead of their aliases, must be used when
  defining command defaults. The command defaults will also be
  applied to the aliases of the commands defined.

diff::
  Settings used when displaying diffs. They are all boolean and
  defaults to False.
  git;;
    Use git extended diff format.
  nodates;;
    Don't include dates in diff headers.
  showfunc;;
    Show which function each change is in.
  ignorews;;
    Ignore white space when comparing lines.
  ignorewsamount;;
    Ignore changes in the amount of white space.
  ignoreblanklines;;
    Ignore changes whose lines are all blank.

email::
  Settings for extensions that send email messages.
  from;;
    Optional.  Email address to use in "From" header and SMTP envelope
    of outgoing messages.
  to;;
    Optional.  Comma-separated list of recipients' email addresses.
  cc;;
    Optional.  Comma-separated list of carbon copy recipients'
    email addresses.
  bcc;;
    Optional.  Comma-separated list of blind carbon copy
    recipients' email addresses.  Cannot be set interactively.
  method;;
    Optional.  Method to use to send email messages.  If value is
    "smtp" (default), use SMTP (see section "[smtp]" for
    configuration).  Otherwise, use as name of program to run that
    acts like sendmail (takes "-f" option for sender, list of
    recipients on command line, message on stdin).  Normally, setting
    this to "sendmail" or "/usr/sbin/sendmail" is enough to use
    sendmail to send messages.

  Email example:

    [email]
    from = Joseph User <[e-mail]>
    method = /usr/sbin/sendmail

extensions::
  Mercurial has an extension mechanism for adding new features. To
  enable an extension, create an entry for it in this section.

  If you know that the extension is already in Python's search path,
  you can give the name of the module, followed by "=", with nothing
  after the "=".

  Otherwise, give a name that you choose, followed by "=", followed by
  the path to the ".py" file (including the file name extension) that
  defines the extension.

  Example for ~/.hgrc:

    [extensions]
    # (the mq extension will get loaded from mercurial's path)
    hgext.mq =
    # (this extension will get loaded from the file specified)
    myfeature = ~/.hgext/myfeature.py

format::

  usestore;;
    Enable or disable the "store" repository format which improves
    compatibility with systems that fold case or otherwise mangle
    filenames. Enabled by default. Disabling this option will allow
    you to store longer filenames in some situations at the expense of
    compatibility.

hooks::
  Commands or Python functions that get automatically executed by
  various actions such as starting or finishing a commit. Multiple
  hooks can be run for the same action by appending a suffix to the
  action. Overriding a site-wide hook can be done by changing its
  value or setting it to an empty string.

  Example .hg/hgrc:

    [hooks]
    # do not use the site-wide hook
    incoming =
    incoming.email = /my/email/hook
    incoming.autobuild = /my/build/hook

  Most hooks are run with environment variables set that give added
  useful information.  For each hook below, the environment variables
  it is passed are listed with names of the form "$HG_foo".

  changegroup;;
    Run after a changegroup has been added via push, pull or
    unbundle. ID of the first new changeset is in $HG_NODE.  URL from
    which changes came is in $HG_URL.
  commit;;
    Run after a changeset has been created in the local repository.
    ID of the newly created changeset is in $HG_NODE.  Parent
    changeset IDs are in $HG_PARENT1 and $HG_PARENT2.
  incoming;;
    Run after a changeset has been pulled, pushed, or unbundled into
    the local repository.  The ID of the newly arrived changeset is in
    $HG_NODE.  URL that was source of changes came is in $HG_URL.
  outgoing;;
    Run after sending changes from local repository to another.  ID of
    first changeset sent is in $HG_NODE.  Source of operation is in
    $HG_SOURCE; see "preoutgoing" hook for description.
  post-<command>;;
    Run after successful invocations of the associated command. The
    contents of the command line are passed as $HG_ARGS and the result
    code in $HG_RESULT. Hook failure is ignored.
  pre-<command>;;
    Run before executing the associated command. The contents of the
    command line are passed as $HG_ARGS. If the hook returns failure,
    the command doesn't execute and Mercurial returns the failure code.
  prechangegroup;;
    Run before a changegroup is added via push, pull or unbundle.
    Exit status 0 allows the changegroup to proceed.  Non-zero status
    will cause the push, pull or unbundle to fail.  URL from which
    changes will come is in $HG_URL.
  precommit;;
    Run before starting a local commit.  Exit status 0 allows the
    commit to proceed.  Non-zero status will cause the commit to fail.
    Parent changeset IDs are in $HG_PARENT1 and $HG_PARENT2.
  preoutgoing;;
    Run before collecting changes to send from the local repository to
    another.  Non-zero status will cause failure.  This lets you
    prevent pull over http or ssh.  Also prevents against local pull,
    push (outbound) or bundle commands, but not effective, since you
    can just copy files instead then.  Source of operation is in
    $HG_SOURCE.  If "serve", operation is happening on behalf of
    remote ssh or http repository.  If "push", "pull" or "bundle",
    operation is happening on behalf of repository on same system.
  pretag;;
    Run before creating a tag.  Exit status 0 allows the tag to be
    created.  Non-zero status will cause the tag to fail.  ID of
    changeset to tag is in $HG_NODE.  Name of tag is in $HG_TAG.  Tag
    is local if $HG_LOCAL=1, in repo if $HG_LOCAL=0.
  pretxnchangegroup;;
    Run after a changegroup has been added via push, pull or unbundle,
    but before the transaction has been committed.  Changegroup is
    visible to hook program.  This lets you validate incoming changes
    before accepting them.  Passed the ID of the first new changeset
    in $HG_NODE.  Exit status 0 allows the transaction to commit.
    Non-zero status will cause the transaction to be rolled back and
    the push, pull or unbundle will fail.  URL that was source of
    changes is in $HG_URL.
  pretxncommit;;
    Run after a changeset has been created but the transaction not yet
    committed.  Changeset is visible to hook program.  This lets you
    validate commit message and changes.  Exit status 0 allows the
    commit to proceed.  Non-zero status will cause the transaction to
    be rolled back.  ID of changeset is in $HG_NODE.  Parent changeset
    IDs are in $HG_PARENT1 and $HG_PARENT2.
  preupdate;;
    Run before updating the working directory.  Exit status 0 allows
    the update to proceed.  Non-zero status will prevent the update.
    Changeset ID of first new parent is in $HG_PARENT1.  If merge, ID
    of second new parent is in $HG_PARENT2.
  tag;;
    Run after a tag is created.  ID of tagged changeset is in
    $HG_NODE.  Name of tag is in $HG_TAG.  Tag is local if
    $HG_LOCAL=1, in repo if $HG_LOCAL=0.
  update;;
    Run after updating the working directory.  Changeset ID of first
    new parent is in $HG_PARENT1.  If merge, ID of second new parent
    is in $HG_PARENT2.  If update succeeded, $HG_ERROR=0.  If update
    failed (e.g. because conflicts not resolved), $HG_ERROR=1.

  Note: it is generally better to use standard hooks rather than the
  generic pre- and post- command hooks as they are guaranteed to be
  called in the appropriate contexts for influencing transactions.
  Also, hooks like "commit" will be called in all contexts that
  generate a commit (eg. tag) and not just the commit command.

  Note2: Environment variables with empty values may not be passed to
  hooks on platforms like Windows. For instance, $HG_PARENT2 will
  not be available under Windows for non-merge changesets while being
  set to an empty value under Unix-like systems.

  The syntax for Python hooks is as follows:

    hookname = python:modulename.submodule.callable

  Python hooks are run within the Mercurial process.  Each hook is
  called with at least three keyword arguments: a ui object (keyword
  "ui"), a repository object (keyword "repo"), and a "hooktype"
  keyword that tells what kind of hook is used.  Arguments listed as
  environment variables above are passed as keyword arguments, with no
  "HG_" prefix, and names in lower case.

  If a Python hook returns a "true" value or raises an exception, this
  is treated as failure of the hook.

http_proxy::
  Used to access web-based Mercurial repositories through a HTTP
  proxy.
  host;;
    Host name and (optional) port of the proxy server, for example
    "myproxy:8000".
  no;;
    Optional.  Comma-separated list of host names that should bypass
    the proxy.
  passwd;;
    Optional.  Password to authenticate with at the proxy server.
  user;;
    Optional.  User name to authenticate with at the proxy server.

smtp::
  Configuration for extensions that need to send email messages.
  host;;
    Host name of mail server, e.g. "mail.example.com".
  port;;
    Optional.  Port to connect to on mail server.  Default: 25.
  tls;;
    Optional.  Whether to connect to mail server using TLS.  True or
    False.  Default: False.
  username;;
    Optional.  User name to authenticate to SMTP server with.
    If username is specified, password must also be specified.
    Default: none.
  password;;
    Optional.  Password to authenticate to SMTP server with.
    If username is specified, password must also be specified.
    Default: none.
  local_hostname;;
    Optional.  It's the hostname that the sender can use to identify itself
    to the MTA.

paths::
  Assigns symbolic names to repositories.  The left side is the
  symbolic name, and the right gives the directory or URL that is the
  location of the repository.  Default paths can be declared by
  setting the following entries.
  default;;
    Directory or URL to use when pulling if no source is specified.
    Default is set to repository from which the current repository
    was cloned.
  default-push;;
    Optional.  Directory or URL to use when pushing if no destination
    is specified.

server::
  Controls generic server settings.
  uncompressed;;
    Whether to allow clients to clone a repo using the uncompressed
    streaming protocol.  This transfers about 40% more data than a
    regular clone, but uses less memory and CPU on both server and
    client.  Over a LAN (100Mbps or better) or a very fast WAN, an
    uncompressed streaming clone is a lot faster (~10x) than a regular
    clone.  Over most WAN connections (anything slower than about
    6Mbps), uncompressed streaming is slower, because of the extra
    data transfer overhead.  Default is False.

trusted::
  For security reasons, Mercurial will not use the settings in
  the .hg/hgrc file from a repository if it doesn't belong to a
  trusted user or to a trusted group.  The main exception is the
  web interface, which automatically uses some safe settings, since
  it's common to serve repositories from different users.

  This section specifies what users and groups are trusted.  The
  current user is always trusted.  To trust everybody, list a user
  or a group with name "*".

  users;;
    Comma-separated list of trusted users.
  groups;;
    Comma-separated list of trusted groups.

ui::
  User interface controls.
  debug;;
    Print debugging information.  True or False.  Default is False.
  editor;;
    The editor to use during a commit.  Default is $EDITOR or "vi".
  fallbackencoding;;
    Encoding to try if it's not possible to decode the changelog using
    UTF-8.  Default is ISO-8859-1.
  ignore;;
    A file to read per-user ignore patterns from. This file should be in
    the same format as a repository-wide .hgignore file. This option
    supports hook syntax, so if you want to specify multiple ignore
    files, you can do so by setting something like
    "ignore.other = ~/.hgignore2". For details of the ignore file
    format, see the hgignore(5) man page.
  interactive;;
    Allow to prompt the user.  True or False.  Default is True.
  logtemplate;;
    Template string for commands that print changesets.
  merge;;
    The conflict resolution program to use during a manual merge.
    Default is "hgmerge".
  patch;;
    command to use to apply patches. Look for 'gpatch' or 'patch' in PATH if
    unset.
  quiet;;
    Reduce the amount of output printed.  True or False.  Default is False.
  remotecmd;;
    remote command to use for clone/push/pull operations. Default is 'hg'.
  report_untrusted;;
    Warn if a .hg/hgrc file is ignored due to not being owned by a
    trusted user or group.  True or False.  Default is True.
  slash;;
    Display paths using a slash ("/") as the path separator.  This only
    makes a difference on systems where the default path separator is not
    the slash character (e.g. Windows uses the backslash character ("\")).
    Default is False.
  ssh;;
    command to use for SSH connections. Default is 'ssh'.
  strict;;
    Require exact command names, instead of allowing unambiguous
    abbreviations.  True or False.  Default is False.
  style;;
    Name of style to use for command output.
  timeout;;
    The timeout used when a lock is held (in seconds), a negative value
    means no timeout. Default is 600.
  username;;
    The committer of a changeset created when running "commit".
    Typically a person's name and email address, e.g. "Fred Widget
    <[e-mail]>".  Default is $EMAIL or username@hostname.
    If the username in hgrc is empty, it has to be specified manually or
    in a different hgrc file (e.g. $HOME/.hgrc, if the admin set "username ="
    in the system hgrc).
  verbose;;
    Increase the amount of output printed.  True or False.  Default is False.


web::
  Web interface configuration.
  accesslog;;
    Where to output the access log. Default is stdout.
  address;;
    Interface address to bind to. Default is all.
  allow_archive;;
    List of archive format (bz2, gz, zip) allowed for downloading.
    Default is empty.
  allowbz2;;
    (DEPRECATED) Whether to allow .tar.bz2 downloading of repo revisions.
    Default is false.
  allowgz;;
    (DEPRECATED) Whether to allow .tar.gz downloading of repo revisions.
    Default is false.
  allowpull;;
    Whether to allow pulling from the repository. Default is true.
  allow_push;;
    Whether to allow pushing to the repository.  If empty or not set,
    push is not allowed.  If the special value "*", any remote user
    can push, including unauthenticated users.  Otherwise, the remote
    user must have been authenticated, and the authenticated user name
    must be present in this list (separated by whitespace or ",").
    The contents of the allow_push list are examined after the
    deny_push list.
  allowzip;;
    (DEPRECATED) Whether to allow .zip downloading of repo revisions.
    Default is false. This feature creates temporary files.
  baseurl;;
    Base URL to use when publishing URLs in other locations, so
    third-party tools like email notification hooks can construct URLs.
    Example: "http://hgserver/repos/"
  contact;;
    Name or email address of the person in charge of the repository.
    Default is "unknown".
  deny_push;;
    Whether to deny pushing to the repository.  If empty or not set,
    push is not denied.  If the special value "*", all remote users
    are denied push.  Otherwise, unauthenticated users are all denied,
    and any authenticated user name present in this list (separated by
    whitespace or ",") is also denied.  The contents of the deny_push
    list are examined before the allow_push list.
  description;;
    Textual description of the repository's purpose or contents.
    Default is "unknown".
  encoding;;
    Character encoding name.
    Example: "UTF-8"
  errorlog;;
    Where to output the error log. Default is stderr.
  hidden;;
    Whether to hide the repository in the hgwebdir index. Default is false.
  ipv6;;
    Whether to use IPv6. Default is false.
  name;;
    Repository name to use in the web interface. Default is current
    working directory.
  maxchanges;;
    Maximum number of changes to list on the changelog. Default is 10.
  maxfiles;;
    Maximum number of files to list per changeset. Default is 10.
  port;;
    Port to listen on. Default is 8000.
  push_ssl;;
    Whether to require that inbound pushes be transported over SSL to
    prevent password sniffing.  Default is true.
  staticurl;;
    Base URL to use for static files. If unset, static files (e.g.
    the hgicon.png favicon) will be served by the CGI script itself.
    Use this setting to serve them directly with the HTTP server.
    Example: "http://hgserver/static/"
  stripes;;
    How many lines a "zebra stripe" should span in multiline output.
    Default is 1; set to 0 to disable.
  style;;
    Which template map style to use.
  templates;;
    Where to find the HTML templates. Default is install path.


AUTHOR
------
Bryan O'Sullivan <[e-mail]>.

Mercurial was written by Matt Mackall <[e-mail]>.

SEE ALSO
--------
hg(1), hgignore(5)

COPYING
-------
This manual page is copyright 2005 Bryan O'Sullivan.
Mercurial is copyright 2005-2007 Matt Mackall.
Free use of this software is granted under the terms of the GNU General
Public License (GPL).