annotate tests/test-paths.t @ 38855:7848f284b211

revisions: allow "x123" to refer to nodeid prefix "123"

When resolving "123" to a revision, we try to interpret it as revnum
before we try to interpret it as a nodeid hex prefix. This can lead to
the shortest valid prefix being longer than necessary. This patch lets
us write such nodeids in a shorter form by prefixing them with "x"
instead of adding more hex digits until they're longer than the
longest decimal revnum.

On my hg repo with almost 69k revisions, turning this feature on saves
on average 0.4% on the average nodeid length. That clearly doesn't
justify this patch. However, it becomes more usefule when combined
with the earlier patches in this series that let you disambiguate
nodeid prefixes within a configured revset.

Note that we attempt to resolve symbols as nodeid prefixes after we've
exhausted all other posibilities, so this is a backwards compatible
change (only queries that would previously fail may now succeed).

I've still hidden this feature behind an experiemntal config option so
we can roll it back if needed.

Differential Revision: https://phab.mercurial-scm.org/D4041

  $ hg init a
  $ hg clone a b
  updating to branch default
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd a

with no paths:

  $ hg paths
  $ hg paths unknown
  not found!
  [1]
  $ hg paths -Tjson
  [
  ]

with paths:

  $ echo '[paths]' >> .hg/hgrc
  $ echo 'dupe = ../b#tip' >> .hg/hgrc
  $ echo 'expand = $SOMETHING/bar' >> .hg/hgrc
  $ hg in dupe
  comparing with $TESTTMP/b
  no changes found
  [1]
  $ cd ..
  $ hg -R a in dupe
  comparing with $TESTTMP/b
  no changes found
  [1]
  $ cd a
  $ hg paths
  dupe = $TESTTMP/b#tip
  expand = $TESTTMP/a/$SOMETHING/bar
  $ SOMETHING=foo hg paths
  dupe = $TESTTMP/b#tip
  expand = $TESTTMP/a/foo/bar
#if msys
  $ SOMETHING=//foo hg paths
  dupe = $TESTTMP/b#tip
  expand = /foo/bar
#else
  $ SOMETHING=/foo hg paths
  dupe = $TESTTMP/b#tip
  expand = /foo/bar
#endif
  $ hg paths -q
  dupe
  expand
  $ hg paths dupe
  $TESTTMP/b#tip
  $ hg paths -q dupe
  $ hg paths unknown
  not found!
  [1]
  $ hg paths -q unknown
  [1]

formatter output with paths:

  $ echo 'dupe:pushurl = https://example.com/dupe' >> .hg/hgrc
  $ hg paths -Tjson | sed 's|\\\\|\\|g'
  [
   {
    "name": "dupe",
    "pushurl": "https://example.com/dupe",
    "url": "$TESTTMP/b#tip"
   },
   {
    "name": "expand",
    "url": "$TESTTMP/a/$SOMETHING/bar"
   }
  ]
  $ hg paths -Tjson dupe | sed 's|\\\\|\\|g'
  [
   {
    "name": "dupe",
    "pushurl": "https://example.com/dupe",
    "url": "$TESTTMP/b#tip"
   }
  ]
  $ hg paths -Tjson -q unknown
  [
  ]
  [1]

log template:

 (behaves as a {name: path-string} dict by default)

  $ hg log -rnull -T '{peerurls}\n'
  dupe=$TESTTMP/b#tip expand=$TESTTMP/a/$SOMETHING/bar
  $ hg log -rnull -T '{join(peerurls, "\n")}\n'
  dupe=$TESTTMP/b#tip
  expand=$TESTTMP/a/$SOMETHING/bar
  $ hg log -rnull -T '{peerurls % "{name}: {url}\n"}'
  dupe: $TESTTMP/b#tip
  expand: $TESTTMP/a/$SOMETHING/bar
  $ hg log -rnull -T '{get(peerurls, "dupe")}\n'
  $TESTTMP/b#tip

 (sub options can be populated by map/dot operation)

  $ hg log -rnull \
  > -T '{get(peerurls, "dupe") % "url: {url}\npushurl: {pushurl}\n"}'
  url: $TESTTMP/b#tip
  pushurl: https://example.com/dupe
  $ hg log -rnull -T '{peerurls.dupe.pushurl}\n'
  https://example.com/dupe

 (in JSON, it's a dict of urls)

  $ hg log -rnull -T '{peerurls|json}\n' | sed 's|\\\\|/|g'
  {"dupe": "$TESTTMP/b#tip", "expand": "$TESTTMP/a/$SOMETHING/bar"}

password should be masked in plain output, but not in machine-readable/template
output:

  $ echo 'insecure = http://foo:[e-mail]/' >> .hg/hgrc
  $ hg paths insecure
  http://foo:***@example.com/
  $ hg paths -Tjson insecure
  [
   {
    "name": "insecure",
    "url": "http://foo:[e-mail]/"
   }
  ]
  $ hg log -rnull -T '{get(peerurls, "insecure")}\n'
  http://foo:[e-mail]/

zeroconf wraps ui.configitems(), which shouldn't crash at least:

  $ hg paths --config extensions.zeroconf=
  dupe = $TESTTMP/b#tip
  dupe:pushurl = https://example.com/dupe
  expand = $TESTTMP/a/$SOMETHING/bar
  insecure = http://foo:***@example.com/

  $ cd ..

sub-options for an undeclared path are ignored

  $ hg init suboptions
  $ cd suboptions

  $ cat > .hg/hgrc << EOF
  > [paths]
  > path0 = https://example.com/path0
  > path1:pushurl = https://example.com/path1
  > EOF
  $ hg paths
  path0 = https://example.com/path0

unknown sub-options aren't displayed

  $ cat > .hg/hgrc << EOF
  > [paths]
  > path0 = https://example.com/path0
  > path0:foo = https://example.com/path1
  > EOF

  $ hg paths
  path0 = https://example.com/path0

:pushurl must be a URL

  $ cat > .hg/hgrc << EOF
  > [paths]
  > default = /path/to/nothing
  > default:pushurl = /not/a/url
  > EOF

  $ hg paths
  (paths.default:pushurl not a URL; ignoring)
  default = /path/to/nothing

#fragment is not allowed in :pushurl

  $ cat > .hg/hgrc << EOF
  > [paths]
  > default = https://example.com/repo
  > invalid = https://example.com/repo
  > invalid:pushurl = https://example.com/repo#branch
  > EOF

  $ hg paths
  ("#fragment" in paths.invalid:pushurl not supported; ignoring)
  default = https://example.com/repo
  invalid = https://example.com/repo
  invalid:pushurl = https://example.com/repo

  $ cd ..

'file:' disables [paths] entries for clone destination

  $ cat >> $HGRCPATH <<EOF
  > [paths]
  > gpath1 = http://hg.example.com
  > EOF

  $ hg clone a gpath1
  abort: cannot create new http repository
  [255]

  $ hg clone a file:gpath1
  updating to branch default
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd gpath1
  $ hg -q id
  000000000000

  $ cd ..