annotate mercurial/patch.py @ 15164:7bddec632821

patchbomb: make it easy for the user to decline sending an intro message.

- prompt(): respect interactive mode; clarify logic a bit
- rename introneeded() to introwanted() and give it only one caller
- add 'numbered' arg to makepatch() so it does not need to call
  introwanted()
- factor makeintro() out of getpatchmsgs(), so it's easier to skip the
  intro message based on the user's behaviour

Unexpected but perfectly reasonable side effect: in non-interactive
mode, we don't show unanswerable "Cc" or "From" prompts anymore, so
remove those from the test expectations.

# patch.py - patch file parsing routines
#
# Copyright 2006 Brendan Cully <[e-mail]>
# Copyright 2007 Chris Mason <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

import cStringIO, email.Parser, os, errno, re
import tempfile, zlib, shutil

from i18n import _
from node import hex, nullid, short
import base85, mdiff, scmutil, util, diffhelpers, copies, encoding, error
import context

gitre = re.compile('diff --git a/(.*) b/(.*)')

class PatchError(Exception):
    pass


# public functions

def split(stream):
    '''return an iterator of individual patches from a stream'''
    def isheader(line, inheader):
        if inheader and line[0] in (' ', '\t'):
            # continuation
            return True
        if line[0] in (' ', '-', '+'):
            # diff line - don't check for header pattern in there
            return False
        l = line.split(': ', 1)
        return len(l) == 2 and ' ' not in l[0]

    def chunk(lines):
        return cStringIO.StringIO(''.join(lines))

    def hgsplit(stream, cur):
        inheader = True

        for line in stream:
            if not line.strip():
                inheader = False
            if not inheader and line.startswith('# HG changeset patch'):
                yield chunk(cur)
                cur = []
                inheader = True

            cur.append(line)

        if cur:
            yield chunk(cur)

    def mboxsplit(stream, cur):
        for line in stream:
            if line.startswith('From '):
                for c in split(chunk(cur[1:])):
                    yield c
                cur = []

            cur.append(line)

        if cur:
            for c in split(chunk(cur[1:])):
                yield c

    def mimesplit(stream, cur):
        def msgfp(m):
            fp = cStringIO.StringIO()
            g = email.Generator.Generator(fp, mangle_from_=False)
            g.flatten(m)
            fp.seek(0)
            return fp

        for line in stream:
            cur.append(line)
        c = chunk(cur)

        m = email.Parser.Parser().parse(c)
        if not m.is_multipart():
            yield msgfp(m)
        else:
            ok_types = ('text/plain', 'text/x-diff', 'text/x-patch')
            for part in m.walk():
                ct = part.get_content_type()
                if ct not in ok_types:
                    continue
                yield msgfp(part)

    def headersplit(stream, cur):
        inheader = False

        for line in stream:
            if not inheader and isheader(line, inheader):
                yield chunk(cur)
                cur = []
                inheader = True
            if inheader and not isheader(line, inheader):
                inheader = False

            cur.append(line)

        if cur:
            yield chunk(cur)

    def remainder(cur):
        yield chunk(cur)

    class fiter(object):
        def __init__(self, fp):
            self.fp = fp

        def __iter__(self):
            return self

        def next(self):
            l = self.fp.readline()
            if not l:
                raise StopIteration
            return l

    inheader = False
    cur = []

    mimeheaders = ['content-type']

    if not util.safehasattr(stream, 'next'):
        # http responses, for example, have readline but not next
        stream = fiter(stream)

    for line in stream:
        cur.append(line)
        if line.startswith('# HG changeset patch'):
            return hgsplit(stream, cur)
        elif line.startswith('From '):
            return mboxsplit(stream, cur)
        elif isheader(line, inheader):
            inheader = True
            if line.split(':', 1)[0].lower() in mimeheaders:
                # let email parser handle this
                return mimesplit(stream, cur)
        elif line.startswith('--- ') and inheader:
            # No evil headers seen by diff start, split by hand
            return headersplit(stream, cur)
        # Not enough info, keep reading

    # if we are here, we have a very plain patch
    return remainder(cur)

def extract(ui, fileobj):
    '''extract patch from data read from fileobj.

    patch can be a normal patch or contained in an email message.

    return tuple (filename, message, user, date, branch, node, p1, p2).
    Any item in the returned tuple can be None. If filename is None,
    fileobj did not contain a patch. Caller must unlink filename when done.'''

    # attempt to detect the start of a patch
    # (this heuristic is borrowed from quilt)
    diffre = re.compile(r'^(?:Index:[ \t]|diff[ \t]|RCS file: |'
                        r'retrieving revision [0-9]+(\.[0-9]+)*$|'
                        r'---[ \t].*?^\+\+\+[ \t]|'
                        r'\*\*\*[ \t].*?^---[ \t])', re.MULTILINE|re.DOTALL)

    fd, tmpname = tempfile.mkstemp(prefix='hg-patch-')
    tmpfp = os.fdopen(fd, 'w')
    try:
        msg = email.Parser.Parser().parse(fileobj)

        subject = msg['Subject']
        user = msg['From']
        if not subject and not user:
            # Not an email, restore parsed headers if any
            subject = '\n'.join(': '.join(h) for h in msg.items()) + '\n'

        gitsendmail = 'git-send-email' in msg.get('X-Mailer', '')
        # should try to parse msg['Date']
        date = None
        nodeid = None
        branch = None
        parents = []

        if subject:
            if subject.startswith('[PATCH'):
                pend = subject.find(']')
                if pend >= 0:
                    subject = subject[pend + 1:].lstrip()
            subject = re.sub(r'\n[ \t]+', ' ', subject)
            ui.debug('Subject: %s\n' % subject)
        if user:
            ui.debug('From: %s\n' % user)
        diffs_seen = 0
        ok_types = ('text/plain', 'text/x-diff', 'text/x-patch')
        message = ''
        for part in msg.walk():
            content_type = part.get_content_type()
            ui.debug('Content-Type: %s\n' % content_type)
            if content_type not in ok_types:
                continue
            payload = part.get_payload(decode=True)
            m = diffre.search(payload)
            if m:
                hgpatch = False
                hgpatchheader = False
                ignoretext = False

                ui.debug('found patch at byte %d\n' % m.start(0))
                diffs_seen += 1
                cfp = cStringIO.StringIO()
                for line in payload[:m.start(0)].splitlines():
                    if line.startswith('# HG changeset patch') and not hgpatch:
                        ui.debug('patch generated by hg export\n')
                        hgpatch = True
                        hgpatchheader = True
                        # drop earlier commit message content
                        cfp.seek(0)
                        cfp.truncate()
                        subject = None
                    elif hgpatchheader:
                        if line.startswith('# User '):
                            user = line[7:]
                            ui.debug('From: %s\n' % user)
                        elif line.startswith("# Date "):
                            date = line[7:]
                        elif line.startswith("# Branch "):
                            branch = line[9:]
                        elif line.startswith("# Node ID "):
                            nodeid = line[10:]
                        elif line.startswith("# Parent "):
                            parents.append(line[10:])
                        elif not line.startswith("# "):
                            hgpatchheader = False
                    elif line == '---' and gitsendmail:
                        ignoretext = True
                    if not hgpatchheader and not ignoretext:
                        cfp.write(line)
                        cfp.write('\n')
                message = cfp.getvalue()
                if tmpfp:
                    tmpfp.write(payload)
                    if not payload.endswith('\n'):
                        tmpfp.write('\n')
            elif not diffs_seen and message and content_type == 'text/plain':
                message += '\n' + payload
    except:
        tmpfp.close()
        os.unlink(tmpname)
        raise

    if subject and not message.startswith(subject):
        message = '%s\n%s' % (subject, message)
    tmpfp.close()
    if not diffs_seen:
        os.unlink(tmpname)
        return None, message, user, date, branch, None, None, None
    p1 = parents and parents.pop(0) or None
    p2 = parents and parents.pop(0) or None
    return tmpname, message, user, date, branch, nodeid, p1, p2

class patchmeta(object):
    """Patched file metadata

    'op' is the performed operation within ADD, DELETE, RENAME, MODIFY
    or COPY.  'path' is patched file path. 'oldpath' is set to the
    origin file when 'op' is either COPY or RENAME, None otherwise. If
    file mode is changed, 'mode' is a tuple (islink, isexec) where
    'islink' is True if the file is a symlink and 'isexec' is True if
    the file is executable. Otherwise, 'mode' is None.
    """
    def __init__(self, path):
        self.path = path
        self.oldpath = None
        self.mode = None
        self.op = 'MODIFY'
        self.binary = False

    def setmode(self, mode):
        islink = mode & 020000
        isexec = mode & 0100
        self.mode = (islink, isexec)

    def copy(self):
        other = patchmeta(self.path)
        other.oldpath = self.oldpath
        other.mode = self.mode
        other.op = self.op
        other.binary = self.binary
        return other

    def __repr__(self):
        return "<patchmeta %s %r>" % (self.op, self.path)

def readgitpatch(lr):
    """extract git-style metadata about patches from <patchname>"""

    # Filter patch for git information
    gp = None
    gitpatches = []
    for line in lr:
        line = line.rstrip(' \r\n')
        if line.startswith('diff --git'):
            m = gitre.match(line)
            if m:
                if gp:
                    gitpatches.append(gp)
                dst = m.group(2)
                gp = patchmeta(dst)
        elif gp:
            if line.startswith('--- '):
                gitpatches.append(gp)
                gp = None
                continue
            if line.startswith('rename from '):
                gp.op = 'RENAME'
                gp.oldpath = line[12:]
            elif line.startswith('rename to '):
                gp.path = line[10:]
            elif line.startswith('copy from '):
                gp.op = 'COPY'
                gp.oldpath = line[10:]
            elif line.startswith('copy to '):
                gp.path = line[8:]
            elif line.startswith('deleted file'):
                gp.op = 'DELETE'
            elif line.startswith('new file mode '):
                gp.op = 'ADD'
                gp.setmode(int(line[-6:], 8))
            elif line.startswith('new mode '):
                gp.setmode(int(line[-6:], 8))
            elif line.startswith('GIT binary patch'):
                gp.binary = True
    if gp:
        gitpatches.append(gp)

    return gitpatches

class linereader(object):
    # simple class to allow pushing lines back into the input stream
    def __init__(self, fp):
        self.fp = fp
        self.buf = []

    def push(self, line):
        if line is not None:
            self.buf.append(line)

    def readline(self):
        if self.buf:
            l = self.buf[0]
            del self.buf[0]
            return l
        return self.fp.readline()

    def __iter__(self):
        while True:
            l = self.readline()
            if not l:
                break
            yield l

class abstractbackend(object):
    def __init__(self, ui):
        self.ui = ui

    def getfile(self, fname):
        """Return target file data and flags as a (data, (islink,
        isexec)) tuple.
        """
        raise NotImplementedError

    def setfile(self, fname, data, mode, copysource):
        """Write data to target file fname and set its mode. mode is a
        (islink, isexec) tuple. If data is None, the file content should
        be left unchanged. If the file is modified after being copied,
        copysource is set to the original file name.
        """
        raise NotImplementedError

    def unlink(self, fname):
        """Unlink target file."""
        raise NotImplementedError

    def writerej(self, fname, failed, total, lines):
        """Write rejected lines for fname. total is the number of hunks
        which failed to apply and total the total number of hunks for this
        files.
        """
        pass

    def exists(self, fname):
        raise NotImplementedError

class fsbackend(abstractbackend):
    def __init__(self, ui, basedir):
        super(fsbackend, self).__init__(ui)
        self.opener = scmutil.opener(basedir)

    def _join(self, f):
        return os.path.join(self.opener.base, f)

    def getfile(self, fname):
        path = self._join(fname)
        if os.path.islink(path):
            return (os.readlink(path), (True, False))
        isexec = False
        try:
            isexec = os.lstat(path).st_mode & 0100 != 0
        except OSError, e:
            if e.errno != errno.ENOENT:
                raise
        return (self.opener.read(fname), (False, isexec))

    def setfile(self, fname, data, mode, copysource):
        islink, isexec = mode
        if data is None:
            util.setflags(self._join(fname), islink, isexec)
            return
        if islink:
            self.opener.symlink(data, fname)
        else:
            self.opener.write(fname, data)
            if isexec:
                util.setflags(self._join(fname), False, True)

    def unlink(self, fname):
        try:
            util.unlinkpath(self._join(fname))
        except OSError, inst:
            if inst.errno != errno.ENOENT:
                raise

    def writerej(self, fname, failed, total, lines):
        fname = fname + ".rej"
        self.ui.warn(
            _("%d out of %d hunks FAILED -- saving rejects to file %s\n") %
            (failed, total, fname))
        fp = self.opener(fname, 'w')
        fp.writelines(lines)
        fp.close()

    def exists(self, fname):
        return os.path.lexists(self._join(fname))

class workingbackend(fsbackend):
    def __init__(self, ui, repo, similarity):
        super(workingbackend, self).__init__(ui, repo.root)
        self.repo = repo
        self.similarity = similarity
        self.removed = set()
        self.changed = set()
        self.copied = []

    def _checkknown(self, fname):
        if self.repo.dirstate[fname] == '?' and self.exists(fname):
            raise PatchError(_('cannot patch %s: file is not tracked') % fname)

    def setfile(self, fname, data, mode, copysource):
        self._checkknown(fname)
        super(workingbackend, self).setfile(fname, data, mode, copysource)
        if copysource is not None:
            self.copied.append((copysource, fname))
        self.changed.add(fname)

    def unlink(self, fname):
        self._checkknown(fname)
        super(workingbackend, self).unlink(fname)
        self.removed.add(fname)
        self.changed.add(fname)

    def close(self):
        wctx = self.repo[None]
        addremoved = set(self.changed)
        for src, dst in self.copied:
            scmutil.dirstatecopy(self.ui, self.repo, wctx, src, dst)
            addremoved.discard(src)
        if (not self.similarity) and self.removed:
            wctx.forget(sorted(self.removed))
        if addremoved:
            cwd = self.repo.getcwd()
            if cwd:
                addremoved = [util.pathto(self.repo.root, cwd, f)
                              for f in addremoved]
            scmutil.addremove(self.repo, addremoved, similarity=self.similarity)
        return sorted(self.changed)

class filestore(object):
    def __init__(self, maxsize=None):
        self.opener = None
        self.files = {}
        self.created = 0
        self.maxsize = maxsize
        if self.maxsize is None:
            self.maxsize = 4*(2**20)
        self.size = 0
        self.data = {}

    def setfile(self, fname, data, mode, copied=None):
        if self.maxsize < 0 or (len(data) + self.size) <= self.maxsize:
            self.data[fname] = (data, mode, copied)
            self.size += len(data)
        else:
            if self.opener is None:
                root = tempfile.mkdtemp(prefix='hg-patch-')
                self.opener = scmutil.opener(root)
            # Avoid filename issues with these simple names
            fn = str(self.created)
            self.opener.write(fn, data)
            self.created += 1
            self.files[fname] = (fn, mode, copied)

    def getfile(self, fname):
        if fname in self.data:
            return self.data[fname]
        if not self.opener or fname not in self.files:
            raise IOError()
        fn, mode, copied = self.files[fname]
        return self.opener.read(fn), mode, copied

    def close(self):
        if self.opener:
            shutil.rmtree(self.opener.base)

class repobackend(abstractbackend):
    def __init__(self, ui, repo, ctx, store):
        super(repobackend, self).__init__(ui)
        self.repo = repo
        self.ctx = ctx
        self.store = store
        self.changed = set()
        self.removed = set()
        self.copied = {}

    def _checkknown(self, fname):
        if fname not in self.ctx:
            raise PatchError(_('cannot patch %s: file is not tracked') % fname)

    def getfile(self, fname):
        try:
            fctx = self.ctx[fname]
        except error.LookupError:
            raise IOError()
        flags = fctx.flags()
        return fctx.data(), ('l' in flags, 'x' in flags)

    def setfile(self, fname, data, mode, copysource):
        if copysource:
            self._checkknown(copysource)
        if data is None:
            data = self.ctx[fname].data()
        self.store.setfile(fname, data, mode, copysource)
        self.changed.add(fname)
        if copysource:
            self.copied[fname] = copysource

    def unlink(self, fname):
        self._checkknown(fname)
        self.removed.add(fname)

    def exists(self, fname):
        return fname in self.ctx

    def close(self):
        return self.changed | self.removed

# @@ -start,len +start,len @@ or @@ -start +start @@ if len is 1
unidesc = re.compile('@@ -(\d+)(,(\d+))? \+(\d+)(,(\d+))? @@')
contextdesc = re.compile('(---|\*\*\*) (\d+)(,(\d+))? (---|\*\*\*)')
eolmodes = ['strict', 'crlf', 'lf', 'auto']

class patchfile(object):
    def __init__(self, ui, gp, backend, store, eolmode='strict'):
        self.fname = gp.path
        self.eolmode = eolmode
        self.eol = None
        self.backend = backend
        self.ui = ui
        self.lines = []
        self.exists = False
        self.missing = True
        self.mode = gp.mode
        self.copysource = gp.oldpath
        self.create = gp.op in ('ADD', 'COPY', 'RENAME')
        self.remove = gp.op == 'DELETE'
        try:
            if self.copysource is None:
                data, mode = backend.getfile(self.fname)
                self.exists = True
            else:
                data, mode = store.getfile(self.copysource)[:2]
                self.exists = backend.exists(self.fname)
            self.missing = False
            if data:
                self.lines = mdiff.splitnewlines(data)
            if self.mode is None:
                self.mode = mode
            if self.lines:
                # Normalize line endings
                if self.lines[0].endswith('\r\n'):
                    self.eol = '\r\n'
                elif self.lines[0].endswith('\n'):
                    self.eol = '\n'
                if eolmode != 'strict':
                    nlines = []
                    for l in self.lines:
                        if l.endswith('\r\n'):
                            l = l[:-2] + '\n'
                        nlines.append(l)
                    self.lines = nlines
        except IOError:
            if self.create:
                self.missing = False
            if self.mode is None:
                self.mode = (False, False)
        if self.missing:
             self.ui.warn(_("unable to find '%s' for patching\n") % self.fname)

        self.hash = {}
        self.dirty = 0
        self.offset = 0
        self.skew = 0
        self.rej = []
        self.fileprinted = False
        self.printfile(False)
        self.hunks = 0

    def writelines(self, fname, lines, mode):
        if self.eolmode == 'auto':
            eol = self.eol
        elif self.eolmode == 'crlf':
            eol = '\r\n'
        else:
            eol = '\n'

        if self.eolmode != 'strict' and eol and eol != '\n':
            rawlines = []
            for l in lines:
                if l and l[-1] == '\n':
                    l = l[:-1] + eol
                rawlines.append(l)
            lines = rawlines

        self.backend.setfile(fname, ''.join(lines), mode, self.copysource)

    def printfile(self, warn):
        if self.fileprinted:
            return
        if warn or self.ui.verbose:
            self.fileprinted = True
        s = _("patching file %s\n") % self.fname
        if warn:
            self.ui.warn(s)
        else:
            self.ui.note(s)


    def findlines(self, l, linenum):
        # looks through the hash and finds candidate lines.  The
        # result is a list of line numbers sorted based on distance
        # from linenum

        cand = self.hash.get(l, [])
        if len(cand) > 1:
            # resort our list of potentials forward then back.
            cand.sort(key=lambda x: abs(x - linenum))
        return cand

    def write_rej(self):
        # our rejects are a little different from patch(1).  This always
        # creates rejects in the same form as the original patch.  A file
        # header is inserted so that you can run the reject through patch again
        # without having to type the filename.
        if not self.rej:
            return
        base = os.path.basename(self.fname)
        lines = ["--- %s\n+++ %s\n" % (base, base)]
        for x in self.rej:
            for l in x.hunk:
                lines.append(l)
                if l[-1] != '\n':
                    lines.append("\n\ No newline at end of file\n")
        self.backend.writerej(self.fname, len(self.rej), self.hunks, lines)

    def apply(self, h):
        if not h.complete():
            raise PatchError(_("bad hunk #%d %s (%d %d %d %d)") %
                            (h.number, h.desc, len(h.a), h.lena, len(h.b),
                            h.lenb))

        self.hunks += 1

        if self.missing:
            self.rej.append(h)
            return -1

        if self.exists and self.create:
            if self.copysource:
                self.ui.warn(_("cannot create %s: destination already "
                               "exists\n" % self.fname))
            else:
                self.ui.warn(_("file %s already exists\n") % self.fname)
            self.rej.append(h)
            return -1

        if isinstance(h, binhunk):
            if self.remove:
                self.backend.unlink(self.fname)
            else:
                self.lines[:] = h.new()
                self.offset += len(h.new())
                self.dirty = True
            return 0

        horig = h
        if (self.eolmode in ('crlf', 'lf')
            or self.eolmode == 'auto' and self.eol):
            # If new eols are going to be normalized, then normalize
            # hunk data before patching. Otherwise, preserve input
            # line-endings.
            h = h.getnormalized()

        # fast case first, no offsets, no fuzz
        old = h.old()
        # patch starts counting at 1 unless we are adding the file
        if h.starta == 0:
            start = 0
        else:
            start = h.starta + self.offset - 1
        orig_start = start
        # if there's skew we want to emit the "(offset %d lines)" even
        # when the hunk cleanly applies at start + skew, so skip the
        # fast case code
        if self.skew == 0 and diffhelpers.testhunk(old, self.lines, start) == 0:
            if self.remove:
                self.backend.unlink(self.fname)
            else:
                self.lines[start : start + h.lena] = h.new()
                self.offset += h.lenb - h.lena
                self.dirty = True
            return 0

        # ok, we couldn't match the hunk. Lets look for offsets and fuzz it
        self.hash = {}
        for x, s in enumerate(self.lines):
            self.hash.setdefault(s, []).append(x)
        if h.hunk[-1][0] != ' ':
            # if the hunk tried to put something at the bottom of the file
            # override the start line and use eof here
            search_start = len(self.lines)
        else:
            search_start = orig_start + self.skew

        for fuzzlen in xrange(3):
            for toponly in [True, False]:
                old = h.old(fuzzlen, toponly)

                cand = self.findlines(old[0][1:], search_start)
                for l in cand:
                    if diffhelpers.testhunk(old, self.lines, l) == 0:
                        newlines = h.new(fuzzlen, toponly)
                        self.lines[l : l + len(old)] = newlines
                        self.offset += len(newlines) - len(old)
                        self.skew = l - orig_start
                        self.dirty = True
                        offset = l - orig_start - fuzzlen
                        if fuzzlen:
                            msg = _("Hunk #%d succeeded at %d "
                                    "with fuzz %d "
                                    "(offset %d lines).\n")
                            self.printfile(True)
                            self.ui.warn(msg %
                                (h.number, l + 1, fuzzlen, offset))
                        else:
                            msg = _("Hunk #%d succeeded at %d "
                                    "(offset %d lines).\n")
                            self.ui.note(msg % (h.number, l + 1, offset))
                        return fuzzlen
        self.printfile(True)
        self.ui.warn(_("Hunk #%d FAILED at %d\n") % (h.number, orig_start))
        self.rej.append(horig)
        return -1

    def close(self):
        if self.dirty:
            self.writelines(self.fname, self.lines, self.mode)
        self.write_rej()
        return len(self.rej)

class hunk(object):
    def __init__(self, desc, num, lr, context):
        self.number = num
        self.desc = desc
        self.hunk = [desc]
        self.a = []
        self.b = []
        self.starta = self.lena = None
        self.startb = self.lenb = None
        if lr is not None:
            if context:
                self.read_context_hunk(lr)
            else:
                self.read_unified_hunk(lr)

    def getnormalized(self):
        """Return a copy with line endings normalized to LF."""

        def normalize(lines):
            nlines = []
            for line in lines:
                if line.endswith('\r\n'):
                    line = line[:-2] + '\n'
                nlines.append(line)
            return nlines

        # Dummy object, it is rebuilt manually
        nh = hunk(self.desc, self.number, None, None)
        nh.number = self.number
        nh.desc = self.desc
        nh.hunk = self.hunk
        nh.a = normalize(self.a)
        nh.b = normalize(self.b)
        nh.starta = self.starta
        nh.startb = self.startb
        nh.lena = self.lena
        nh.lenb = self.lenb
        return nh

    def read_unified_hunk(self, lr):
        m = unidesc.match(self.desc)
        if not m:
            raise PatchError(_("bad hunk #%d") % self.number)
        self.starta, foo, self.lena, self.startb, foo2, self.lenb = m.groups()
        if self.lena is None:
            self.lena = 1
        else:
            self.lena = int(self.lena)
        if self.lenb is None:
            self.lenb = 1
        else:
            self.lenb = int(self.lenb)
        self.starta = int(self.starta)
        self.startb = int(self.startb)
        diffhelpers.addlines(lr, self.hunk, self.lena, self.lenb, self.a, self.b)
        # if we hit eof before finishing out the hunk, the last line will
        # be zero length.  Lets try to fix it up.
        while len(self.hunk[-1]) == 0:
            del self.hunk[-1]
            del self.a[-1]
            del self.b[-1]
            self.lena -= 1
            self.lenb -= 1
        self._fixnewline(lr)

    def read_context_hunk(self, lr):
        self.desc = lr.readline()
        m = contextdesc.match(self.desc)
        if not m:
            raise PatchError(_("bad hunk #%d") % self.number)
        foo, self.starta, foo2, aend, foo3 = m.groups()
        self.starta = int(self.starta)
        if aend is None:
            aend = self.starta
        self.lena = int(aend) - self.starta
        if self.starta:
            self.lena += 1
        for x in xrange(self.lena):
            l = lr.readline()
            if l.startswith('---'):
                # lines addition, old block is empty
                lr.push(l)
                break
            s = l[2:]
            if l.startswith('- ') or l.startswith('! '):
                u = '-' + s
            elif l.startswith('  '):
                u = ' ' + s
            else:
                raise PatchError(_("bad hunk #%d old text line %d") %
                                 (self.number, x))
            self.a.append(u)
            self.hunk.append(u)

        l = lr.readline()
        if l.startswith('\ '):
            s = self.a[-1][:-1]
            self.a[-1] = s
            self.hunk[-1] = s
            l = lr.readline()
        m = contextdesc.match(l)
        if not m:
            raise PatchError(_("bad hunk #%d") % self.number)
        foo, self.startb, foo2, bend, foo3 = m.groups()
        self.startb = int(self.startb)
        if bend is None:
            bend = self.startb
        self.lenb = int(bend) - self.startb
        if self.startb:
            self.lenb += 1
        hunki = 1
        for x in xrange(self.lenb):
            l = lr.readline()
            if l.startswith('\ '):
                # XXX: the only way to hit this is with an invalid line range.
                # The no-eol marker is not counted in the line range, but I
                # guess there are diff(1) out there which behave differently.
                s = self.b[-1][:-1]
                self.b[-1] = s
                self.hunk[hunki - 1] = s
                continue
            if not l:
                # line deletions, new block is empty and we hit EOF
                lr.push(l)
                break
            s = l[2:]
            if l.startswith('+ ') or l.startswith('! '):
                u = '+' + s
            elif l.startswith('  '):
                u = ' ' + s
            elif len(self.b) == 0:
                # line deletions, new block is empty
                lr.push(l)
                break
            else:
                raise PatchError(_("bad hunk #%d old text line %d") %
                                 (self.number, x))
            self.b.append(s)
            while True:
                if hunki >= len(self.hunk):
                    h = ""
                else:
                    h = self.hunk[hunki]
                hunki += 1
                if h == u:
                    break
                elif h.startswith('-'):
                    continue
                else:
                    self.hunk.insert(hunki - 1, u)
                    break

        if not self.a:
            # this happens when lines were only added to the hunk
            for x in self.hunk:
                if x.startswith('-') or x.startswith(' '):
                    self.a.append(x)
        if not self.b:
            # this happens when lines were only deleted from the hunk
            for x in self.hunk:
                if x.startswith('+') or x.startswith(' '):
                    self.b.append(x[1:])
        # @@ -start,len +start,len @@
        self.desc = "@@ -%d,%d +%d,%d @@\n" % (self.starta, self.lena,
                                             self.startb, self.lenb)
        self.hunk[0] = self.desc
        self._fixnewline(lr)

    def _fixnewline(self, lr):
        l = lr.readline()
        if l.startswith('\ '):
            diffhelpers.fix_newline(self.hunk, self.a, self.b)
        else:
            lr.push(l)

    def complete(self):
        return len(self.a) == self.lena and len(self.b) == self.lenb

    def fuzzit(self, l, fuzz, toponly):
        # this removes context lines from the top and bottom of list 'l'.  It
        # checks the hunk to make sure only context lines are removed, and then
        # returns a new shortened list of lines.
        fuzz = min(fuzz, len(l)-1)
        if fuzz:
            top = 0
            bot = 0
            hlen = len(self.hunk)
            for x in xrange(hlen - 1):
                # the hunk starts with the @@ line, so use x+1
                if self.hunk[x + 1][0] == ' ':
                    top += 1
                else:
                    break
            if not toponly:
                for x in xrange(hlen - 1):
                    if self.hunk[hlen - bot - 1][0] == ' ':
                        bot += 1
                    else:
                        break

            # top and bot now count context in the hunk
            # adjust them if either one is short
            context = max(top, bot, 3)
            if bot < context:
                bot = max(0, fuzz - (context - bot))
            else:
                bot = min(fuzz, bot)
            if top < context:
                top = max(0, fuzz - (context - top))
            else:
                top = min(fuzz, top)

            return l[top:len(l)-bot]
        return l

    def old(self, fuzz=0, toponly=False):
        return self.fuzzit(self.a, fuzz, toponly)

    def new(self, fuzz=0, toponly=False):
        return self.fuzzit(self.b, fuzz, toponly)

class binhunk(object):
    'A binary patch file. Only understands literals so far.'
    def __init__(self, lr):
        self.text = None
        self.hunk = ['GIT binary patch\n']
        self._read(lr)

    def complete(self):
        return self.text is not None

    def new(self):
        return [self.text]

    def _read(self, lr):
        line = lr.readline()
        self.hunk.append(line)
        while line and not line.startswith('literal '):
            line = lr.readline()
            self.hunk.append(line)
        if not line:
            raise PatchError(_('could not extract binary patch'))
        size = int(line[8:].rstrip())
        dec = []
        line = lr.readline()
        self.hunk.append(line)
        while len(line) > 1:
            l = line[0]
            if l <= 'Z' and l >= 'A':
                l = ord(l) - ord('A') + 1
            else:
                l = ord(l) - ord('a') + 27
            dec.append(base85.b85decode(line[1:-1])[:l])
            line = lr.readline()
            self.hunk.append(line)
        text = zlib.decompress(''.join(dec))
        if len(text) != size:
            raise PatchError(_('binary patch is %d bytes, not %d') %
                             len(text), size)
        self.text = text

def parsefilename(str):
    # --- filename \t|space stuff
    s = str[4:].rstrip('\r\n')
    i = s.find('\t')
    if i < 0:
        i = s.find(' ')
        if i < 0:
            return s
    return s[:i]

def pathstrip(path, strip):
    pathlen = len(path)
    i = 0
    if strip == 0:
        return '', path.rstrip()
    count = strip
    while count > 0:
        i = path.find('/', i)
        if i == -1:
            raise PatchError(_("unable to strip away %d of %d dirs from %s") %
                             (count, strip, path))
        i += 1
        # consume '//' in the path
        while i < pathlen - 1 and path[i] == '/':
            i += 1
        count -= 1
    return path[:i].lstrip(), path[i:].rstrip()

def makepatchmeta(backend, afile_orig, bfile_orig, hunk, strip):
    nulla = afile_orig == "/dev/null"
    nullb = bfile_orig == "/dev/null"
    create = nulla and hunk.starta == 0 and hunk.lena == 0
    remove = nullb and hunk.startb == 0 and hunk.lenb == 0
    abase, afile = pathstrip(afile_orig, strip)
    gooda = not nulla and backend.exists(afile)
    bbase, bfile = pathstrip(bfile_orig, strip)
    if afile == bfile:
        goodb = gooda
    else:
        goodb = not nullb and backend.exists(bfile)
    missing = not goodb and not gooda and not create

    # some diff programs apparently produce patches where the afile is
    # not /dev/null, but afile starts with bfile
    abasedir = afile[:afile.rfind('/') + 1]
    bbasedir = bfile[:bfile.rfind('/') + 1]
    if (missing and abasedir == bbasedir and afile.startswith(bfile)
        and hunk.starta == 0 and hunk.lena == 0):
        create = True
        missing = False

    # If afile is "a/b/foo" and bfile is "a/b/foo.orig" we assume the
    # diff is between a file and its backup. In this case, the original
    # file should be patched (see original mpatch code).
    isbackup = (abase == bbase and bfile.startswith(afile))
    fname = None
    if not missing:
        if gooda and goodb:
            fname = isbackup and afile or bfile
        elif gooda:
            fname = afile

    if not fname:
        if not nullb:
            fname = isbackup and afile or bfile
        elif not nulla:
            fname = afile
        else:
            raise PatchError(_("undefined source and destination files"))

    gp = patchmeta(fname)
    if create:
        gp.op = 'ADD'
    elif remove:
        gp.op = 'DELETE'
    return gp

def scangitpatch(lr, firstline):
    """
    Git patches can emit:
    - rename a to b
    - change b
    - copy a to c
    - change c

    We cannot apply this sequence as-is, the renamed 'a' could not be
    found for it would have been renamed already. And we cannot copy
    from 'b' instead because 'b' would have been changed already. So
    we scan the git patch for copy and rename commands so we can
    perform the copies ahead of time.
    """
    pos = 0
    try:
        pos = lr.fp.tell()
        fp = lr.fp
    except IOError:
        fp = cStringIO.StringIO(lr.fp.read())
    gitlr = linereader(fp)
    gitlr.push(firstline)
    gitpatches = readgitpatch(gitlr)
    fp.seek(pos)
    return gitpatches

def iterhunks(fp):
    """Read a patch and yield the following events:
    - ("file", afile, bfile, firsthunk): select a new target file.
    - ("hunk", hunk): a new hunk is ready to be applied, follows a
    "file" event.
    - ("git", gitchanges): current diff is in git format, gitchanges
    maps filenames to gitpatch records. Unique event.
    """
    afile = ""
    bfile = ""
    state = None
    hunknum = 0
    emitfile = newfile = False
    gitpatches = None

    # our states
    BFILE = 1
    context = None
    lr = linereader(fp)

    while True:
        x = lr.readline()
        if not x:
            break
        if state == BFILE and (
            (not context and x[0] == '@')
            or (context is not False and x.startswith('***************'))
            or x.startswith('GIT binary patch')):
            gp = None
            if (gitpatches and
                (gitpatches[-1][0] == afile or gitpatches[-1][1] == bfile)):
                gp = gitpatches.pop()[2]
            if x.startswith('GIT binary patch'):
                h = binhunk(lr)
            else:
                if context is None and x.startswith('***************'):
                    context = True
                h = hunk(x, hunknum + 1, lr, context)
            hunknum += 1
            if emitfile:
                emitfile = False
                yield 'file', (afile, bfile, h, gp and gp.copy() or None)
            yield 'hunk', h
        elif x.startswith('diff --git'):
            m = gitre.match(x)
            if not m:
                continue
            if not gitpatches:
                # scan whole input for git metadata
                gitpatches = [('a/' + gp.path, 'b/' + gp.path, gp) for gp
                              in scangitpatch(lr, x)]
                yield 'git', [g[2].copy() for g in gitpatches
                              if g[2].op in ('COPY', 'RENAME')]
                gitpatches.reverse()
            afile = 'a/' + m.group(1)
            bfile = 'b/' + m.group(2)
            while afile != gitpatches[-1][0] and bfile != gitpatches[-1][1]:
                gp = gitpatches.pop()[2]
                yield 'file', ('a/' + gp.path, 'b/' + gp.path, None, gp.copy())
            gp = gitpatches[-1][2]
            # copy/rename + modify should modify target, not source
            if gp.op in ('COPY', 'DELETE', 'RENAME', 'ADD') or gp.mode:
                afile = bfile
            newfile = True
        elif x.startswith('---'):
            # check for a unified diff
            l2 = lr.readline()
            if not l2.startswith('+++'):
                lr.push(l2)
                continue
            newfile = True
            context = False
            afile = parsefilename(x)
            bfile = parsefilename(l2)
        elif x.startswith('***'):
            # check for a context diff
            l2 = lr.readline()
            if not l2.startswith('---'):
                lr.push(l2)
                continue
            l3 = lr.readline()
            lr.push(l3)
            if not l3.startswith("***************"):
                lr.push(l2)
                continue
            newfile = True
            context = True
            afile = parsefilename(x)
            bfile = parsefilename(l2)

        if newfile:
            newfile = False
            emitfile = True
            state = BFILE
            hunknum = 0

    while gitpatches:
        gp = gitpatches.pop()[2]
        yield 'file', ('a/' + gp.path, 'b/' + gp.path, None, gp.copy())

def applydiff(ui, fp, backend, store, strip=1, eolmode='strict'):
    """Reads a patch from fp and tries to apply it.

    Returns 0 for a clean patch, -1 if any rejects were found and 1 if
    there was any fuzz.

    If 'eolmode' is 'strict', the patch content and patched file are
    read in binary mode. Otherwise, line endings are ignored when
    patching then normalized according to 'eolmode'.
    """
    return _applydiff(ui, fp, patchfile, backend, store, strip=strip,
                      eolmode=eolmode)

def _applydiff(ui, fp, patcher, backend, store, strip=1,
               eolmode='strict'):

    def pstrip(p):
        return pathstrip(p, strip - 1)[1]

    rejects = 0
    err = 0
    current_file = None

    for state, values in iterhunks(fp):
        if state == 'hunk':
            if not current_file:
                continue
            ret = current_file.apply(values)
            if ret > 0:
                err = 1
        elif state == 'file':
            if current_file:
                rejects += current_file.close()
                current_file = None
            afile, bfile, first_hunk, gp = values
            if gp:
                path = pstrip(gp.path)
                gp.path = pstrip(gp.path)
                if gp.oldpath:
                    gp.oldpath = pstrip(gp.oldpath)
            else:
                gp = makepatchmeta(backend, afile, bfile, first_hunk, strip)
            if gp.op == 'RENAME':
                backend.unlink(gp.oldpath)
            if not first_hunk:
                if gp.op == 'DELETE':
                    backend.unlink(gp.path)
                    continue
                data, mode = None, None
                if gp.op in ('RENAME', 'COPY'):
                    data, mode = store.getfile(gp.oldpath)[:2]
                if gp.mode:
                    mode = gp.mode
                    if gp.op == 'ADD':
                        # Added files without content have no hunk and
                        # must be created
                        data = ''
                if data or mode:
                    if (gp.op in ('ADD', 'RENAME', 'COPY')
                        and backend.exists(gp.path)):
                        raise PatchError(_("cannot create %s: destination "
                                           "already exists") % gp.path)
                    backend.setfile(gp.path, data, mode, gp.oldpath)
                continue
            try:
                current_file = patcher(ui, gp, backend, store,
                                       eolmode=eolmode)
            except PatchError, inst:
                ui.warn(str(inst) + '\n')
                current_file = None
                rejects += 1
                continue
        elif state == 'git':
            for gp in values:
                path = pstrip(gp.oldpath)
                data, mode = backend.getfile(path)
                store.setfile(path, data, mode)
        else:
            raise util.Abort(_('unsupported parser state: %s') % state)

    if current_file:
        rejects += current_file.close()

    if rejects:
        return -1
    return err

def _externalpatch(ui, repo, patcher, patchname, strip, files,
                   similarity):
    """use <patcher> to apply <patchname> to the working directory.
    returns whether patch was applied with fuzz factor."""

    fuzz = False
    args = []
    cwd = repo.root
    if cwd:
        args.append('-d %s' % util.shellquote(cwd))
    fp = util.popen('%s %s -p%d < %s' % (patcher, ' '.join(args), strip,
                                       util.shellquote(patchname)))
    try:
        for line in fp:
            line = line.rstrip()
            ui.note(line + '\n')
            if line.startswith('patching file '):
                pf = util.parsepatchoutput(line)
                printed_file = False
                files.add(pf)
            elif line.find('with fuzz') >= 0:
                fuzz = True
                if not printed_file:
                    ui.warn(pf + '\n')
                    printed_file = True
                ui.warn(line + '\n')
            elif line.find('saving rejects to file') >= 0:
                ui.warn(line + '\n')
            elif line.find('FAILED') >= 0:
                if not printed_file:
                    ui.warn(pf + '\n')
                    printed_file = True
                ui.warn(line + '\n')
    finally:
        if files:
            cfiles = list(files)
            cwd = repo.getcwd()
            if cwd:
                cfiles = [util.pathto(repo.root, cwd, f)
                          for f in cfiles]
            scmutil.addremove(repo, cfiles, similarity=similarity)
    code = fp.close()
    if code:
        raise PatchError(_("patch command failed: %s") %
                         util.explainexit(code)[0])
    return fuzz

def patchbackend(ui, backend, patchobj, strip, files=None, eolmode='strict'):
    if files is None:
        files = set()
    if eolmode is None:
        eolmode = ui.config('patch', 'eol', 'strict')
    if eolmode.lower() not in eolmodes:
        raise util.Abort(_('unsupported line endings type: %s') % eolmode)
    eolmode = eolmode.lower()

    store = filestore()
    try:
        fp = open(patchobj, 'rb')
    except TypeError:
        fp = patchobj
    try:
        ret = applydiff(ui, fp, backend, store, strip=strip,
                        eolmode=eolmode)
    finally:
        if fp != patchobj:
            fp.close()
        files.update(backend.close())
        store.close()
    if ret < 0:
        raise PatchError(_('patch failed to apply'))
    return ret > 0

def internalpatch(ui, repo, patchobj, strip, files=None, eolmode='strict',
                  similarity=0):
    """use builtin patch to apply <patchobj> to the working directory.
    returns whether patch was applied with fuzz factor."""
    backend = workingbackend(ui, repo, similarity)
    return patchbackend(ui, backend, patchobj, strip, files, eolmode)

def patchrepo(ui, repo, ctx, store, patchobj, strip, files=None,
              eolmode='strict'):
    backend = repobackend(ui, repo, ctx, store)
    return patchbackend(ui, backend, patchobj, strip, files, eolmode)

def makememctx(repo, parents, text, user, date, branch, files, store,
               editor=None):
    def getfilectx(repo, memctx, path):
        data, (islink, isexec), copied = store.getfile(path)
        return context.memfilectx(path, data, islink=islink, isexec=isexec,
                                  copied=copied)
    extra = {}
    if branch:
        extra['branch'] = encoding.fromlocal(branch)
    ctx =  context.memctx(repo, parents, text, files, getfilectx, user,
                          date, extra)
    if editor:
        ctx._text = editor(repo, ctx, [])
    return ctx

def patch(ui, repo, patchname, strip=1, files=None, eolmode='strict',
          similarity=0):
    """Apply <patchname> to the working directory.

    'eolmode' specifies how end of lines should be handled. It can be:
    - 'strict': inputs are read in binary mode, EOLs are preserved
    - 'crlf': EOLs are ignored when patching and reset to CRLF
    - 'lf': EOLs are ignored when patching and reset to LF
    - None: get it from user settings, default to 'strict'
    'eolmode' is ignored when using an external patcher program.

    Returns whether patch was applied with fuzz factor.
    """
    patcher = ui.config('ui', 'patch')
    if files is None:
        files = set()
    try:
        if patcher:
            return _externalpatch(ui, repo, patcher, patchname, strip,
                                  files, similarity)
        return internalpatch(ui, repo, patchname, strip, files, eolmode,
                             similarity)
    except PatchError, err:
        raise util.Abort(str(err))

def changedfiles(ui, repo, patchpath, strip=1):
    backend = fsbackend(ui, repo.root)
    fp = open(patchpath, 'rb')
    try:
        changed = set()
        for state, values in iterhunks(fp):
            if state == 'file':
                afile, bfile, first_hunk, gp = values
                if gp:
                    gp.path = pathstrip(gp.path, strip - 1)[1]
                    if gp.oldpath:
                        gp.oldpath = pathstrip(gp.oldpath, strip - 1)[1]
                else:
                    gp = makepatchmeta(backend, afile, bfile, first_hunk, strip)
                changed.add(gp.path)
                if gp.op == 'RENAME':
                    changed.add(gp.oldpath)
            elif state not in ('hunk', 'git'):
                raise util.Abort(_('unsupported parser state: %s') % state)
        return changed
    finally:
        fp.close()

def b85diff(to, tn):
    '''print base85-encoded binary diff'''
    def gitindex(text):
        if not text:
            return hex(nullid)
        l = len(text)
        s = util.sha1('blob %d\0' % l)
        s.update(text)
        return s.hexdigest()

    def fmtline(line):
        l = len(line)
        if l <= 26:
            l = chr(ord('A') + l - 1)
        else:
            l = chr(l - 26 + ord('a') - 1)
        return '%c%s\n' % (l, base85.b85encode(line, True))

    def chunk(text, csize=52):
        l = len(text)
        i = 0
        while i < l:
            yield text[i:i + csize]
            i += csize

    tohash = gitindex(to)
    tnhash = gitindex(tn)
    if tohash == tnhash:
        return ""

    # TODO: deltas
    ret = ['index %s..%s\nGIT binary patch\nliteral %s\n' %
           (tohash, tnhash, len(tn))]
    for l in chunk(zlib.compress(tn)):
        ret.append(fmtline(l))
    ret.append('\n')
    return ''.join(ret)

class GitDiffRequired(Exception):
    pass

def diffopts(ui, opts=None, untrusted=False):
    def get(key, name=None, getter=ui.configbool):
        return ((opts and opts.get(key)) or
                getter('diff', name or key, None, untrusted=untrusted))
    return mdiff.diffopts(
        text=opts and opts.get('text'),
        git=get('git'),
        nodates=get('nodates'),
        showfunc=get('show_function', 'showfunc'),
        ignorews=get('ignore_all_space', 'ignorews'),
        ignorewsamount=get('ignore_space_change', 'ignorewsamount'),
        ignoreblanklines=get('ignore_blank_lines', 'ignoreblanklines'),
        context=get('unified', getter=ui.config))

def diff(repo, node1=None, node2=None, match=None, changes=None, opts=None,
         losedatafn=None, prefix=''):
    '''yields diff of changes to files between two nodes, or node and
    working directory.

    if node1 is None, use first dirstate parent instead.
    if node2 is None, compare node1 with working directory.

    losedatafn(**kwarg) is a callable run when opts.upgrade=True and
    every time some change cannot be represented with the current
    patch format. Return False to upgrade to git patch format, True to
    accept the loss or raise an exception to abort the diff. It is
    called with the name of current file being diffed as 'fn'. If set
    to None, patches will always be upgraded to git format when
    necessary.

    prefix is a filename prefix that is prepended to all filenames on
    display (used for subrepos).
    '''

    if opts is None:
        opts = mdiff.defaultopts

    if not node1 and not node2:
        node1 = repo.dirstate.p1()

    def lrugetfilectx():
        cache = {}
        order = []
        def getfilectx(f, ctx):
            fctx = ctx.filectx(f, filelog=cache.get(f))
            if f not in cache:
                if len(cache) > 20:
                    del cache[order.pop(0)]
                cache[f] = fctx.filelog()
            else:
                order.remove(f)
            order.append(f)
            return fctx
        return getfilectx
    getfilectx = lrugetfilectx()

    ctx1 = repo[node1]
    ctx2 = repo[node2]

    if not changes:
        changes = repo.status(ctx1, ctx2, match=match)
    modified, added, removed = changes[:3]

    if not modified and not added and not removed:
        return []

    revs = None
    if not repo.ui.quiet:
        hexfunc = repo.ui.debugflag and hex or short
        revs = [hexfunc(node) for node in [node1, node2] if node]

    copy = {}
    if opts.git or opts.upgrade:
        copy = copies.copies(repo, ctx1, ctx2, repo[nullid])[0]

    difffn = lambda opts, losedata: trydiff(repo, revs, ctx1, ctx2,
                 modified, added, removed, copy, getfilectx, opts, losedata, prefix)
    if opts.upgrade and not opts.git:
        try:
            def losedata(fn):
                if not losedatafn or not losedatafn(fn=fn):
                    raise GitDiffRequired()
            # Buffer the whole output until we are sure it can be generated
            return list(difffn(opts.copy(git=False), losedata))
        except GitDiffRequired:
            return difffn(opts.copy(git=True), None)
    else:
        return difffn(opts, None)

def difflabel(func, *args, **kw):
    '''yields 2-tuples of (output, label) based on the output of func()'''
    prefixes = [('diff', 'diff.diffline'),
                ('copy', 'diff.extended'),
                ('rename', 'diff.extended'),
                ('old', 'diff.extended'),
                ('new', 'diff.extended'),
                ('deleted', 'diff.extended'),
                ('---', 'diff.file_a'),
                ('+++', 'diff.file_b'),
                ('@@', 'diff.hunk'),
                ('-', 'diff.deleted'),
                ('+', 'diff.inserted')]

    for chunk in func(*args, **kw):
        lines = chunk.split('\n')
        for i, line in enumerate(lines):
            if i != 0:
                yield ('\n', '')
            stripline = line
            if line and line[0] in '+-':
                # highlight trailing whitespace, but only in changed lines
                stripline = line.rstrip()
            for prefix, label in prefixes:
                if stripline.startswith(prefix):
                    yield (stripline, label)
                    break
            else:
                yield (line, '')
            if line != stripline:
                yield (line[len(stripline):], 'diff.trailingwhitespace')

def diffui(*args, **kw):
    '''like diff(), but yields 2-tuples of (output, label) for ui.write()'''
    return difflabel(diff, *args, **kw)


def _addmodehdr(header, omode, nmode):
    if omode != nmode:
        header.append('old mode %s\n' % omode)
        header.append('new mode %s\n' % nmode)

def trydiff(repo, revs, ctx1, ctx2, modified, added, removed,
            copy, getfilectx, opts, losedatafn, prefix):

    def join(f):
        return os.path.join(prefix, f)

    date1 = util.datestr(ctx1.date())
    man1 = ctx1.manifest()

    gone = set()
    gitmode = {'l': '120000', 'x': '100755', '': '100644'}

    copyto = dict([(v, k) for k, v in copy.items()])

    if opts.git:
        revs = None

    for f in sorted(modified + added + removed):
        to = None
        tn = None
        dodiff = True
        header = []
        if f in man1:
            to = getfilectx(f, ctx1).data()
        if f not in removed:
            tn = getfilectx(f, ctx2).data()
        a, b = f, f
        if opts.git or losedatafn:
            if f in added:
                mode = gitmode[ctx2.flags(f)]
                if f in copy or f in copyto:
                    if opts.git:
                        if f in copy:
                            a = copy[f]
                        else:
                            a = copyto[f]
                        omode = gitmode[man1.flags(a)]
                        _addmodehdr(header, omode, mode)
                        if a in removed and a not in gone:
                            op = 'rename'
                            gone.add(a)
                        else:
                            op = 'copy'
                        header.append('%s from %s\n' % (op, join(a)))
                        header.append('%s to %s\n' % (op, join(f)))
                        to = getfilectx(a, ctx1).data()
                    else:
                        losedatafn(f)
                else:
                    if opts.git:
                        header.append('new file mode %s\n' % mode)
                    elif ctx2.flags(f):
                        losedatafn(f)
                # In theory, if tn was copied or renamed we should check
                # if the source is binary too but the copy record already
                # forces git mode.
                if util.binary(tn):
                    if opts.git:
                        dodiff = 'binary'
                    else:
                        losedatafn(f)
                if not opts.git and not tn:
                    # regular diffs cannot represent new empty file
                    losedatafn(f)
            elif f in removed:
                if opts.git:
                    # have we already reported a copy above?
                    if ((f in copy and copy[f] in added
                         and copyto[copy[f]] == f) or
                        (f in copyto and copyto[f] in added
                         and copy[copyto[f]] == f)):
                        dodiff = False
                    else:
                        header.append('deleted file mode %s\n' %
                                      gitmode[man1.flags(f)])
                elif not to or util.binary(to):
                    # regular diffs cannot represent empty file deletion
                    losedatafn(f)
            else:
                oflag = man1.flags(f)
                nflag = ctx2.flags(f)
                binary = util.binary(to) or util.binary(tn)
                if opts.git:
                    _addmodehdr(header, gitmode[oflag], gitmode[nflag])
                    if binary:
                        dodiff = 'binary'
                elif binary or nflag != oflag:
                    losedatafn(f)
            if opts.git:
                header.insert(0, mdiff.diffline(revs, join(a), join(b), opts))

        if dodiff:
            if dodiff == 'binary':
                text = b85diff(to, tn)
            else:
                text = mdiff.unidiff(to, date1,
                                    # ctx2 date may be dynamic
                                    tn, util.datestr(ctx2.date()),
                                    join(a), join(b), revs, opts=opts)
            if header and (text or len(header) > 1):
                yield ''.join(header)
            if text:
                yield text

def diffstatsum(stats):
    maxfile, maxtotal, addtotal, removetotal, binary = 0, 0, 0, 0, False
    for f, a, r, b in stats:
        maxfile = max(maxfile, encoding.colwidth(f))
        maxtotal = max(maxtotal, a + r)
        addtotal += a
        removetotal += r
        binary = binary or b

    return maxfile, maxtotal, addtotal, removetotal, binary

def diffstatdata(lines):
    diffre = re.compile('^diff .*-r [a-z0-9]+\s(.*)$')

    results = []
    filename, adds, removes = None, 0, 0

    def addresult():
        if filename:
            isbinary = adds == 0 and removes == 0
            results.append((filename, adds, removes, isbinary))

    for line in lines:
        if line.startswith('diff'):
            addresult()
            # set numbers to 0 anyway when starting new file
            adds, removes = 0, 0
            if line.startswith('diff --git'):
                filename = gitre.search(line).group(1)
            elif line.startswith('diff -r'):
                # format: "diff -r ... -r ... filename"
                filename = diffre.search(line).group(1)
        elif line.startswith('+') and not line.startswith('+++'):
            adds += 1
        elif line.startswith('-') and not line.startswith('---'):
            removes += 1
    addresult()
    return results

def diffstat(lines, width=80, git=False):
    output = []
    stats = diffstatdata(lines)
    maxname, maxtotal, totaladds, totalremoves, hasbinary = diffstatsum(stats)

    countwidth = len(str(maxtotal))
    if hasbinary and countwidth < 3:
        countwidth = 3
    graphwidth = width - countwidth - maxname - 6
    if graphwidth < 10:
        graphwidth = 10

    def scale(i):
        if maxtotal <= graphwidth:
            return i
        # If diffstat runs out of room it doesn't print anything,
        # which isn't very useful, so always print at least one + or -
        # if there were at least some changes.
        return max(i * graphwidth // maxtotal, int(bool(i)))

    for filename, adds, removes, isbinary in stats:
        if git and isbinary:
            count = 'Bin'
        else:
            count = adds + removes
        pluses = '+' * scale(adds)
        minuses = '-' * scale(removes)
        output.append(' %s%s |  %*s %s%s\n' %
                      (filename, ' ' * (maxname - encoding.colwidth(filename)),
                       countwidth, count, pluses, minuses))

    if stats:
        output.append(_(' %d files changed, %d insertions(+), %d deletions(-)\n')
                      % (len(stats), totaladds, totalremoves))

    return ''.join(output)

def diffstatui(*args, **kw):
    '''like diffstat(), but yields 2-tuples of (output, label) for
    ui.write()
    '''

    for line in diffstat(*args, **kw).splitlines():
        if line and line[-1] in '+-':
            name, graph = line.rsplit(' ', 1)
            yield (name + ' ', '')
            m = re.search(r'\++', graph)
            if m:
                yield (m.group(0), 'diffstat.inserted')
            m = re.search(r'-+', graph)
            if m:
                yield (m.group(0), 'diffstat.deleted')
        else:
            yield (line, '')
        yield ('\n', '')