annotate hgext/fetch.py @ 31913:850a06176d82

obsolescence: add test case B-1 for obsolescence markers exchange

About 3 years ago, in August 2014, the logic to select what markers to select on
push was ported from the evolve extension to Mercurial core. However, for some
unclear reasons, the tests for that logic were not ported alongside.
I realised it a couple of weeks ago while working on another push related issue.
I've made a clean up pass on the tests and they are now ready to integrate the
core test suite. This series of changesets do not change any logic. I just adds
test for logic that has been around for about 10 versions of Mercurial.

They are a patch for each test case. It makes it easier to review and postpone
one with documentation issues without rejecting the wholes series.

This patch introduce case B-1: Prune on non-targeted common changeset

Each test case comes it in own test file. It help parallelism and does not
introduce a significant overhead from having a single unified giant test file.
Here are timing  to support this claim.

# Multiple test files version:
# run-tests.py --local -j 1 test-exchange-*.t
53.40s user 6.82s system 85% cpu 1:10.76 total
52.79s user 6.97s system 85% cpu 1:09.97 total
52.94s user 6.82s system 85% cpu 1:09.69 total

# Single test file version:
# run-tests.py --local -j 1 test-exchange-obsmarkers.t
52.97s user 6.85s system 85% cpu 1:10.10 total
52.64s user 6.79s system 85% cpu 1:09.63 total
53.70s user 7.00s system 85% cpu 1:11.17 total

# fetch.py - pull and merge remote changes
#
# Copyright 2006 Vadim Gelfer <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

'''pull, update and merge in one command (DEPRECATED)'''

from __future__ import absolute_import

from mercurial.i18n import _
from mercurial.node import (
    short,
)
from mercurial import (
    cmdutil,
    commands,
    error,
    exchange,
    hg,
    lock,
    util,
)

release = lock.release
cmdtable = {}
command = cmdutil.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'

@command('fetch',
    [('r', 'rev', [],
     _('a specific revision you would like to pull'), _('REV')),
    ('e', 'edit', None, _('invoke editor on commit messages')),
    ('', 'force-editor', None, _('edit commit message (DEPRECATED)')),
    ('', 'switch-parent', None, _('switch parents when merging')),
    ] + commands.commitopts + commands.commitopts2 + commands.remoteopts,
    _('hg fetch [SOURCE]'))
def fetch(ui, repo, source='default', **opts):
    '''pull changes from a remote repository, merge new changes if needed.

    This finds all changes from the repository at the specified path
    or URL and adds them to the local repository.

    If the pulled changes add a new branch head, the head is
    automatically merged, and the result of the merge is committed.
    Otherwise, the working directory is updated to include the new
    changes.

    When a merge is needed, the working directory is first updated to
    the newly pulled changes. Local changes are then merged into the
    pulled changes. To switch the merge order, use --switch-parent.

    See :hg:`help dates` for a list of formats valid for -d/--date.

    Returns 0 on success.
    '''

    date = opts.get('date')
    if date:
        opts['date'] = util.parsedate(date)

    parent, _p2 = repo.dirstate.parents()
    branch = repo.dirstate.branch()
    try:
        branchnode = repo.branchtip(branch)
    except error.RepoLookupError:
        branchnode = None
    if parent != branchnode:
        raise error.Abort(_('working directory not at branch tip'),
                         hint=_("use 'hg update' to check out branch tip"))

    wlock = lock = None
    try:
        wlock = repo.wlock()
        lock = repo.lock()

        cmdutil.bailifchanged(repo)

        bheads = repo.branchheads(branch)
        bheads = [head for head in bheads if len(repo[head].children()) == 0]
        if len(bheads) > 1:
            raise error.Abort(_('multiple heads in this branch '
                               '(use "hg heads ." and "hg merge" to merge)'))

        other = hg.peer(repo, opts, ui.expandpath(source))
        ui.status(_('pulling from %s\n') %
                  util.hidepassword(ui.expandpath(source)))
        revs = None
        if opts['rev']:
            try:
                revs = [other.lookup(rev) for rev in opts['rev']]
            except error.CapabilityError:
                err = _("other repository doesn't support revision lookup, "
                        "so a rev cannot be specified.")
                raise error.Abort(err)

        # Are there any changes at all?
        modheads = exchange.pull(repo, other, heads=revs).cgresult
        if modheads == 0:
            return 0

        # Is this a simple fast-forward along the current branch?
        newheads = repo.branchheads(branch)
        newchildren = repo.changelog.nodesbetween([parent], newheads)[2]
        if len(newheads) == 1 and len(newchildren):
            if newchildren[0] != parent:
                return hg.update(repo, newchildren[0])
            else:
                return 0

        # Are there more than one additional branch heads?
        newchildren = [n for n in newchildren if n != parent]
        newparent = parent
        if newchildren:
            newparent = newchildren[0]
            hg.clean(repo, newparent)
        newheads = [n for n in newheads if n != newparent]
        if len(newheads) > 1:
            ui.status(_('not merging with %d other new branch heads '
                        '(use "hg heads ." and "hg merge" to merge them)\n') %
                      (len(newheads) - 1))
            return 1

        if not newheads:
            return 0

        # Otherwise, let's merge.
        err = False
        if newheads:
            # By default, we consider the repository we're pulling
            # *from* as authoritative, so we merge our changes into
            # theirs.
            if opts['switch_parent']:
                firstparent, secondparent = newparent, newheads[0]
            else:
                firstparent, secondparent = newheads[0], newparent
                ui.status(_('updating to %d:%s\n') %
                          (repo.changelog.rev(firstparent),
                           short(firstparent)))
            hg.clean(repo, firstparent)
            ui.status(_('merging with %d:%s\n') %
                      (repo.changelog.rev(secondparent), short(secondparent)))
            err = hg.merge(repo, secondparent, remind=False)

        if not err:
            # we don't translate commit messages
            message = (cmdutil.logmessage(ui, opts) or
                       ('Automated merge with %s' %
                        util.removeauth(other.url())))
            editopt = opts.get('edit') or opts.get('force_editor')
            editor = cmdutil.getcommiteditor(edit=editopt, editform='fetch')
            n = repo.commit(message, opts['user'], opts['date'], editor=editor)
            ui.status(_('new changeset %d:%s merges remote changes '
                        'with local\n') % (repo.changelog.rev(n),
                                           short(n)))

        return err

    finally:
        release(lock, wlock)