mercurial/filelog.py

exchange: improve computation of relevant markers for large repos

Compute the candidate nodes with relevant markers directly
from keys of the predecessors/successors/children dictionaries of
obsstore. This is faster than iterating over all nodes directly.
This test could be further improved for repositories with relative
few markers compared to the repository size, but this is no longer
hot already. With the current loop structure, the obshashrange use
works as well as before as it passes lists with a single node.

Adjust the interface by allowing revision lists as well as node lists.
This helps cases that computes ancestors as it reduces the
materialisation cost. Use this in _pushdiscoveryobsmarker and
_getbundleobsmarkerpart. Improve the latter further by directly using
ancestors().


Performance benchmarks show notable and welcome improvement to no-op push and
pull (that would also apply to other push/pull). This apply to push and pull
done without evolve.

### push/pull Benchmark parameter
  # bin-env-vars.hg.flavor          = default
  # benchmark.variants.explicit-rev = none
  # benchmark.variants.protocol     = ssh
  # benchmark.variants.revs         = none

 ## benchmark.name                  = hg.command.pull
  # data-env-vars.name              = mercurial-devel-2024-03-22-zstd-sparse-revlog
before: 5.968537 seconds
after:  5.668507 seconds (-5.03%, -0.30)
  # data-env-vars.name              = tryton-devel-2024-03-22-zstd-sparse-revlog
before: 1.446232 seconds
after:  0.835553 seconds (-42.23%, -0.61)
  # data-env-vars.name              = netbsd-src-draft-2024-09-19-zstd-sparse-revlog
before: 5.777412 seconds
after:  2.523454 seconds (-56.32%, -3.25)

 ## benchmark.name                  = hg.command.push
  # data-env-vars.name              = mercurial-devel-2024-03-22-zstd-sparse-revlog
before: 6.155501 seconds
after:  5.885072 seconds (-4.39%, -0.27)

  # data-env-vars.name              = tryton-devel-2024-03-22-zstd-sparse-revlog
before: 1.491054 seconds
after:  0.934882 seconds (-37.30%, -0.56)

  # data-env-vars.name              = netbsd-src-draft-2024-09-19-zstd-sparse-revlog
before: 5.902494 seconds
after:  2.957644 seconds (-49.89%, -2.94)

There is not notable different in these result using the "rust" flavor instead
of the "default".  The performance impact on the same operation when using
evolve were also tested and no impact was noted.

# filelog.py - file history class for mercurial
#
# Copyright 2005-2007 Olivia Mackall <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from __future__ import annotations

import typing

from typing import (
    Iterable,
    Iterator,
)

from .i18n import _
from .node import nullrev
from . import (
    error,
    revlog,
)
from .interfaces import (
    repository,
    util as interfaceutil,
)
from .utils import storageutil
from .revlogutils import (
    constants as revlog_constants,
    rewrite,
)


class FileLog:
    _revlog: revlog.revlog
    nullid: bytes
    _fix_issue6528: bool

    def __init__(self, opener, path, try_split=False):
        self._revlog = revlog.revlog(
            opener,
            # XXX should use the unencoded path
            target=(revlog_constants.KIND_FILELOG, path),
            radix=b'/'.join((b'data', path)),
            censorable=True,
            canonical_parent_order=False,  # see comment in revlog.py
            try_split=try_split,
        )
        # Full name of the user visible file, relative to the repository root.
        # Used by LFS.
        self._revlog.filename = path
        self.nullid = self._revlog.nullid
        opts = opener.options
        self._fix_issue6528 = opts.get(b'issue6528.fix-incoming', True)

    def get_revlog(self) -> revlog.revlog:
        """return an actual revlog instance if any

        This exist because a lot of code leverage the fact the underlying
        storage is a revlog for optimization, so giving simple way to access
        the revlog instance helps such code.
        """
        return self._revlog

    def __len__(self) -> int:
        return len(self._revlog)

    def __iter__(self) -> Iterator[int]:
        return self._revlog.__iter__()

    def hasnode(self, node):
        if node in (self.nullid, nullrev):
            return False

        try:
            self._revlog.rev(node)
            return True
        except (TypeError, ValueError, IndexError, error.LookupError):
            return False

    def revs(self, start=0, stop=None):
        return self._revlog.revs(start=start, stop=stop)

    def parents(self, node):
        return self._revlog.parents(node)

    def parentrevs(self, rev):
        return self._revlog.parentrevs(rev)

    def rev(self, node):
        return self._revlog.rev(node)

    def node(self, rev):
        return self._revlog.node(rev)

    def lookup(self, node):
        return storageutil.fileidlookup(
            self._revlog, node, self._revlog.display_id
        )

    def linkrev(self, rev):
        return self._revlog.linkrev(rev)

    def commonancestorsheads(self, node1, node2):
        return self._revlog.commonancestorsheads(node1, node2)

    # Used by dagop.blockdescendants().
    def descendants(self, revs):
        return self._revlog.descendants(revs)

    def heads(self, start=None, stop=None):
        return self._revlog.heads(start, stop)

    # Used by hgweb, children extension.
    def children(self, node):
        return self._revlog.children(node)

    def iscensored(self, rev):
        return self._revlog.iscensored(rev)

    def revision(self, node):
        return self._revlog.revision(node)

    def rawdata(self, node):
        return self._revlog.rawdata(node)

    def emitrevisions(
        self,
        nodes,
        nodesorder=None,
        revisiondata=False,
        assumehaveparentrevisions=False,
        deltamode=repository.CG_DELTAMODE_STD,
        sidedata_helpers=None,
        debug_info=None,
    ):
        return self._revlog.emitrevisions(
            nodes,
            nodesorder=nodesorder,
            revisiondata=revisiondata,
            assumehaveparentrevisions=assumehaveparentrevisions,
            deltamode=deltamode,
            sidedata_helpers=sidedata_helpers,
            debug_info=debug_info,
        )

    def addrevision(
        self,
        revisiondata,
        transaction,
        linkrev,
        p1,
        p2,
        node=None,
        flags=revlog.REVIDX_DEFAULT_FLAGS,
        cachedelta=None,
    ):
        return self._revlog.addrevision(
            revisiondata,
            transaction,
            linkrev,
            p1,
            p2,
            node=node,
            flags=flags,
            cachedelta=cachedelta,
        )

    def addgroup(
        self,
        deltas,
        linkmapper,
        transaction,
        addrevisioncb=None,
        duplicaterevisioncb=None,
        maybemissingparents=False,
        debug_info=None,
        delta_base_reuse_policy=None,
    ):
        if maybemissingparents:
            raise error.Abort(
                _(
                    b'revlog storage does not support missing '
                    b'parents write mode'
                )
            )

        with self._revlog._writing(transaction):
            if self._fix_issue6528:
                deltas = rewrite.filter_delta_issue6528(self._revlog, deltas)

            return self._revlog.addgroup(
                deltas,
                linkmapper,
                transaction,
                addrevisioncb=addrevisioncb,
                duplicaterevisioncb=duplicaterevisioncb,
                debug_info=debug_info,
                delta_base_reuse_policy=delta_base_reuse_policy,
            )

    def getstrippoint(self, minlink):
        return self._revlog.getstrippoint(minlink)

    def strip(self, minlink, transaction):
        return self._revlog.strip(minlink, transaction)

    def censorrevision(self, tr, node, tombstone=b''):
        return self._revlog.censorrevision(tr, node, tombstone=tombstone)

    def files(self):
        return self._revlog.files()

    def read(self, node):
        return storageutil.filtermetadata(self.revision(node))

    def add(self, text, meta, transaction, link, p1=None, p2=None):
        if meta or text.startswith(b'\1\n'):
            text = storageutil.packmeta(meta, text)
        rev = self.addrevision(text, transaction, link, p1, p2)
        return self.node(rev)

    def renamed(self, node):
        return storageutil.filerevisioncopied(self, node)

    def size(self, rev):
        """return the size of a given revision"""

        # for revisions with renames, we have to go the slow way
        node = self.node(rev)
        if self.iscensored(rev):
            return 0
        if self.renamed(node):
            return len(self.read(node))

        # XXX if self.read(node).startswith("\1\n"), this returns (size+4)
        # XXX See also basefilectx.cmp.
        return self._revlog.size(rev)

    def cmp(self, node, text):
        """compare text with a given file revision

        returns True if text is different than what is stored.
        """
        return not storageutil.filedataequivalent(self, node, text)

    def verifyintegrity(self, state) -> Iterable[revlog.RevLogProblem]:
        return self._revlog.verifyintegrity(state)

    def storageinfo(
        self,
        exclusivefiles=False,
        sharedfiles=False,
        revisionscount=False,
        trackedsize=False,
        storedsize=False,
    ):
        return self._revlog.storageinfo(
            exclusivefiles=exclusivefiles,
            sharedfiles=sharedfiles,
            revisionscount=revisionscount,
            trackedsize=trackedsize,
            storedsize=storedsize,
        )

    # Used by repo upgrade.
    def clone(self, tr, destrevlog, **kwargs):
        if not isinstance(destrevlog, filelog):
            msg = b'expected filelog to clone(), not %r'
            msg %= destrevlog
            raise error.ProgrammingError(msg)

        return self._revlog.clone(tr, destrevlog._revlog, **kwargs)


filelog = interfaceutil.implementer(repository.ifilestorage)(FileLog)

if typing.TYPE_CHECKING:
    filelog = FileLog


class narrowfilelog(filelog):
    """Filelog variation to be used with narrow stores."""

    def __init__(self, opener, path, narrowmatch, try_split=False):
        super(narrowfilelog, self).__init__(opener, path, try_split=try_split)
        self._narrowmatch = narrowmatch

    def renamed(self, node):
        res = super(narrowfilelog, self).renamed(node)

        # Renames that come from outside the narrowspec are problematic
        # because we may lack the base text for the rename. This can result
        # in code attempting to walk the ancestry or compute a diff
        # encountering a missing revision. We address this by silently
        # removing rename metadata if the source file is outside the
        # narrow spec.
        #
        # A better solution would be to see if the base revision is available,
        # rather than assuming it isn't.
        #
        # An even better solution would be to teach all consumers of rename
        # metadata that the base revision may not be available.
        #
        # TODO consider better ways of doing this.
        if res and not self._narrowmatch(res[0]):
            return None

        return res

    def size(self, rev):
        # Because we have a custom renamed() that may lie, we need to call
        # the base renamed() to report accurate results.
        node = self.node(rev)
        if super(narrowfilelog, self).renamed(node):
            return len(self.read(node))
        else:
            return super(narrowfilelog, self).size(rev)

    def cmp(self, node, text):
        # We don't call `super` because narrow parents can be buggy in case of a
        # ambiguous dirstate. Always take the slow path until there is a better
        # fix, see issue6150.

        # Censored files compare against the empty file.
        if self.iscensored(self.rev(node)):
            return text != b''

        return self.read(node) != text