annotate mercurial/narrowspec.py @ 37056:861e9d37e56e

wireproto: buffer output frames when in half duplex mode

Previously, when told that a response was ready, the server reactor
would instruct the caller to send frames immediately. This was OK
as an initial implementation. But it would not work for half-duplex
connections where the sender can't receive until all data has been
transmitted - such as httplib based clients.

In this commit, we teach the reactor that output frames should
be buffered until end of input is seen. This required a new
event to inform the reactor of end of input. The result from that
event will instruct the consumer to send all buffered frames.

The HTTP server is buffered by default.

This change effectively hides the complexity of buffering within
the reactor so that transports need not be concerned about it.
This helps keep the transports "dumb" and will make implementing
multiple requests-responses per atomic exchange (like an HTTP
request) much simpler.

Differential Revision: https://phab.mercurial-scm.org/D2860

# narrowspec.py - methods for working with a narrow view of a repository
#
# Copyright 2017 Google, Inc.
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from __future__ import absolute_import

import errno

from .i18n import _
from . import (
    error,
    match as matchmod,
    util,
)

FILENAME = 'narrowspec'

def _parsestoredpatterns(text):
    """Parses the narrowspec format that's stored on disk."""
    patlist = None
    includepats = []
    excludepats = []
    for l in text.splitlines():
        if l == '[includes]':
            if patlist is None:
                patlist = includepats
            else:
                raise error.Abort(_('narrowspec includes section must appear '
                                    'at most once, before excludes'))
        elif l == '[excludes]':
            if patlist is not excludepats:
                patlist = excludepats
            else:
                raise error.Abort(_('narrowspec excludes section must appear '
                                    'at most once'))
        else:
            patlist.append(l)

    return set(includepats), set(excludepats)

def parseserverpatterns(text):
    """Parses the narrowspec format that's returned by the server."""
    includepats = set()
    excludepats = set()

    # We get one entry per line, in the format "<key> <value>".
    # It's OK for value to contain other spaces.
    for kp in (l.split(' ', 1) for l in text.splitlines()):
        if len(kp) != 2:
            raise error.Abort(_('Invalid narrowspec pattern line: "%s"') % kp)
        key = kp[0]
        pat = kp[1]
        if key == 'include':
            includepats.add(pat)
        elif key == 'exclude':
            excludepats.add(pat)
        else:
            raise error.Abort(_('Invalid key "%s" in server response') % key)

    return includepats, excludepats

def normalizesplitpattern(kind, pat):
    """Returns the normalized version of a pattern and kind.

    Returns a tuple with the normalized kind and normalized pattern.
    """
    pat = pat.rstrip('/')
    _validatepattern(pat)
    return kind, pat

def _numlines(s):
    """Returns the number of lines in s, including ending empty lines."""
    # We use splitlines because it is Unicode-friendly and thus Python 3
    # compatible. However, it does not count empty lines at the end, so trick
    # it by adding a character at the end.
    return len((s + 'x').splitlines())

def _validatepattern(pat):
    """Validates the pattern and aborts if it is invalid.

    Patterns are stored in the narrowspec as newline-separated
    POSIX-style bytestring paths. There's no escaping.
    """

    # We use newlines as separators in the narrowspec file, so don't allow them
    # in patterns.
    if _numlines(pat) > 1:
        raise error.Abort(_('newlines are not allowed in narrowspec paths'))

    components = pat.split('/')
    if '.' in components or '..' in components:
        raise error.Abort(_('"." and ".." are not allowed in narrowspec paths'))

def normalizepattern(pattern, defaultkind='path'):
    """Returns the normalized version of a text-format pattern.

    If the pattern has no kind, the default will be added.
    """
    kind, pat = matchmod._patsplit(pattern, defaultkind)
    return '%s:%s' % normalizesplitpattern(kind, pat)

def parsepatterns(pats):
    """Parses a list of patterns into a typed pattern set."""
    return set(normalizepattern(p) for p in pats)

def format(includes, excludes):
    output = '[includes]\n'
    for i in sorted(includes - excludes):
        output += i + '\n'
    output += '[excludes]\n'
    for e in sorted(excludes):
        output += e + '\n'
    return output

def match(root, include=None, exclude=None):
    if not include:
        # Passing empty include and empty exclude to matchmod.match()
        # gives a matcher that matches everything, so explicitly use
        # the nevermatcher.
        return matchmod.never(root, '')
    return matchmod.match(root, '', [], include=include or [],
                          exclude=exclude or [])

def needsexpansion(includes):
    return [i for i in includes if i.startswith('include:')]

def load(repo):
    try:
        spec = repo.vfs.read(FILENAME)
    except IOError as e:
        # Treat "narrowspec does not exist" the same as "narrowspec file exists
        # and is empty".
        if e.errno == errno.ENOENT:
            # Without this the next call to load will use the cached
            # non-existence of the file, which can cause some odd issues.
            repo.invalidate(clearfilecache=True)
            return set(), set()
        raise
    return _parsestoredpatterns(spec)

def save(repo, includepats, excludepats):
    spec = format(includepats, excludepats)
    repo.vfs.write(FILENAME, spec)

def restrictpatterns(req_includes, req_excludes, repo_includes, repo_excludes):
    r""" Restricts the patterns according to repo settings,
    results in a logical AND operation

    :param req_includes: requested includes
    :param req_excludes: requested excludes
    :param repo_includes: repo includes
    :param repo_excludes: repo excludes
    :return: include patterns, exclude patterns, and invalid include patterns.

    >>> restrictpatterns({'f1','f2'}, {}, ['f1'], [])
    (set(['f1']), {}, [])
    >>> restrictpatterns({'f1'}, {}, ['f1','f2'], [])
    (set(['f1']), {}, [])
    >>> restrictpatterns({'f1/fc1', 'f3/fc3'}, {}, ['f1','f2'], [])
    (set(['f1/fc1']), {}, [])
    >>> restrictpatterns({'f1_fc1'}, {}, ['f1','f2'], [])
    ([], set(['path:.']), [])
    >>> restrictpatterns({'f1/../f2/fc2'}, {}, ['f1','f2'], [])
    (set(['f2/fc2']), {}, [])
    >>> restrictpatterns({'f1/../f3/fc3'}, {}, ['f1','f2'], [])
    ([], set(['path:.']), [])
    >>> restrictpatterns({'f1/$non_exitent_var'}, {}, ['f1','f2'], [])
    (set(['f1/$non_exitent_var']), {}, [])
    """
    res_excludes = set(req_excludes)
    res_excludes.update(repo_excludes)
    invalid_includes = []
    if not req_includes:
        res_includes = set(repo_includes)
    elif 'path:.' not in repo_includes:
        res_includes = []
        for req_include in req_includes:
            req_include = util.expandpath(util.normpath(req_include))
            if req_include in repo_includes:
                res_includes.append(req_include)
                continue
            valid = False
            for repo_include in repo_includes:
                if req_include.startswith(repo_include + '/'):
                    valid = True
                    res_includes.append(req_include)
                    break
            if not valid:
                invalid_includes.append(req_include)
        if len(res_includes) == 0:
            res_excludes = {'path:.'}
        else:
            res_includes = set(res_includes)
    else:
        res_includes = set(req_includes)
    return res_includes, res_excludes, invalid_includes