annotate tests/test-debugcommands.t @ 35432:86b8cc1f244e

worker: make windows workers daemons

The windows workers weren't daemons and were not correctly killed when ctrl-c'd from the terminal. Withi this change when the main thread is killed, all daemons get killed as well.
I also reduced the time we give to workers to cleanup nicely to not have people ctrl-c'ing when they get inpatient.

The output when threads clened up nicely:
  PS C:\<dir>> hg.exe sparse --disable-profile SparseProfiles/<profile>.sparse
  interrupted!
The output when threads don't clenup in 1 sec:
  PS C:\<dir> hg.exe sparse --enable-profile SparseProfiles/<profile>.sparse
  failed to kill worker threads while handling an exception
  interrupted!
  Exception in thread Thread-4 (most likely raised during interpreter shutdown):
  PS C:\<dir>>

Test Plan:
Run hg command on windows (pull/update/sparse). Ctrl-C'd sparse --enable-profile command that was using threads and observed in proces explorer that all threads got killed.
ran tests on CentOS

Differential Revision: https://phab.mercurial-scm.org/D1564

  $ cat << EOF >> $HGRCPATH
  > [ui]
  > interactive=yes
  > [format]
  > usegeneraldelta=yes
  > EOF

  $ hg init debugrevlog
  $ cd debugrevlog
  $ echo a > a
  $ hg ci -Am adda
  adding a
  $ hg debugrevlog -m
  format : 1
  flags  : inline, generaldelta
  
  revisions     :  1
      merges    :  0 ( 0.00%)
      normal    :  1 (100.00%)
  revisions     :  1
      full      :  1 (100.00%)
      deltas    :  0 ( 0.00%)
  revision size : 44
      full      : 44 (100.00%)
      deltas    :  0 ( 0.00%)
  
  chunks        :  1
      0x75 (u)  :  1 (100.00%)
  chunks size   : 44
      0x75 (u)  : 44 (100.00%)
  
  avg chain length  :  0
  max chain length  :  0
  max chain reach   : 44
  compression ratio :  0
  
  uncompressed data size (min/max/avg) : 43 / 43 / 43
  full revision size (min/max/avg)     : 44 / 44 / 44
  delta size (min/max/avg)             : 0 / 0 / 0

Test debugindex, with and without the --debug flag
  $ hg debugindex a
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       3   ....       0 b789fdd96dc2 000000000000 000000000000 (re)
  $ hg --debug debugindex a
     rev    offset  length  ..... linkrev nodeid                                   p1                                       p2 (re)
       0         0       3   ....       0 b789fdd96dc2f3bd229c1dd8eedf0fc60e2b68e3 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 (re)
  $ hg debugindex -f 1 a
     rev flag   offset   length     size  .....   link     p1     p2       nodeid (re)
       0 0000        0        3        2   ....      0     -1     -1 b789fdd96dc2 (re)
  $ hg --debug debugindex -f 1 a
     rev flag   offset   length     size  .....   link     p1     p2                                   nodeid (re)
       0 0000        0        3        2   ....      0     -1     -1 b789fdd96dc2f3bd229c1dd8eedf0fc60e2b68e3 (re)

debugdelta chain basic output

  $ hg debugdeltachain -m
      rev  chain# chainlen     prev   delta       size    rawsize  chainsize     ratio   lindist extradist extraratio
        0       1        1       -1    base         44         43         44   1.02326        44         0    0.00000

  $ hg debugdeltachain -m -T '{rev} {chainid} {chainlen}\n'
  0 1 1

  $ hg debugdeltachain -m -Tjson
  [
   {
    "chainid": 1,
    "chainlen": 1,
    "chainratio": 1.02325581395,
    "chainsize": 44,
    "compsize": 44,
    "deltatype": "base",
    "extradist": 0,
    "extraratio": 0.0,
    "lindist": 44,
    "prevrev": -1,
    "rev": 0,
    "uncompsize": 43
   }
  ]

debugdelta chain with sparse read enabled

  $ cat >> $HGRCPATH <<EOF
  > [experimental]
  > sparse-read = True
  > EOF
  $ hg debugdeltachain -m
      rev  chain# chainlen     prev   delta       size    rawsize  chainsize     ratio   lindist extradist extraratio   readsize largestblk rddensity
        0       1        1       -1    base         44         43         44   1.02326        44         0    0.00000         44         44   1.00000

  $ hg debugdeltachain -m -T '{rev} {chainid} {chainlen} {readsize} {largestblock} {readdensity}\n'
  0 1 1 44 44 1.0

  $ hg debugdeltachain -m -Tjson
  [
   {
    "chainid": 1,
    "chainlen": 1,
    "chainratio": 1.02325581395,
    "chainsize": 44,
    "compsize": 44,
    "deltatype": "base",
    "extradist": 0,
    "extraratio": 0.0,
    "largestblock": 44,
    "lindist": 44,
    "prevrev": -1,
    "readdensity": 1.0,
    "readsize": 44,
    "rev": 0,
    "uncompsize": 43
   }
  ]

Test max chain len
  $ cat >> $HGRCPATH << EOF
  > [format]
  > maxchainlen=4
  > EOF

  $ printf "This test checks if maxchainlen config value is respected also it can serve as basic test for debugrevlog -d <file>.\n" >> a
  $ hg ci -m a
  $ printf "b\n" >> a
  $ hg ci -m a
  $ printf "c\n" >> a
  $ hg ci -m a
  $ printf "d\n" >> a
  $ hg ci -m a
  $ printf "e\n" >> a
  $ hg ci -m a
  $ printf "f\n" >> a
  $ hg ci -m a
  $ printf 'g\n' >> a
  $ hg ci -m a
  $ printf 'h\n' >> a
  $ hg ci -m a
  $ hg debugrevlog -d a
  # rev p1rev p2rev start   end deltastart base   p1   p2 rawsize totalsize compression heads chainlen
      0    -1    -1     0   ???          0    0    0    0     ???      ????           ?     1        0 (glob)
      1     0    -1   ???   ???          0    0    0    0     ???      ????           ?     1        1 (glob)
      2     1    -1   ???   ???        ???  ???  ???    0     ???      ????           ?     1        2 (glob)
      3     2    -1   ???   ???        ???  ???  ???    0     ???      ????           ?     1        3 (glob)
      4     3    -1   ???   ???        ???  ???  ???    0     ???      ????           ?     1        4 (glob)
      5     4    -1   ???   ???        ???  ???  ???    0     ???      ????           ?     1        0 (glob)
      6     5    -1   ???   ???        ???  ???  ???    0     ???      ????           ?     1        1 (glob)
      7     6    -1   ???   ???        ???  ???  ???    0     ???      ????           ?     1        2 (glob)
      8     7    -1   ???   ???        ???  ???  ???    0     ???      ????           ?     1        3 (glob)

Test debuglocks command:

  $ hg debuglocks
  lock:  free
  wlock: free

* Test setting the lock

waitlock <file> will wait for file to be created. If it isn't in a reasonable
amount of time, displays error message and returns 1
  $ waitlock() {
  >     start=`date +%s`
  >     timeout=5
  >     while [ \( ! -f $1 \) -a \( ! -L $1 \) ]; do
  >         now=`date +%s`
  >         if [ "`expr $now - $start`" -gt $timeout ]; then
  >             echo "timeout: $1 was not created in $timeout seconds"
  >             return 1
  >         fi
  >         sleep 0.1
  >     done
  > }
  $ dolock() {
  >     {
  >         waitlock .hg/unlock
  >         rm -f .hg/unlock
  >         echo y
  >     } | hg debuglocks "$@" > /dev/null
  > }
  $ dolock -s &
  $ waitlock .hg/store/lock

  $ hg debuglocks
  lock:  user *, process * (*s) (glob)
  wlock: free
  [1]
  $ touch .hg/unlock
  $ wait
  $ [ -f .hg/store/lock ] || echo "There is no lock"
  There is no lock

* Test setting the wlock

  $ dolock -S &
  $ waitlock .hg/wlock

  $ hg debuglocks
  lock:  free
  wlock: user *, process * (*s) (glob)
  [1]
  $ touch .hg/unlock
  $ wait
  $ [ -f .hg/wlock ] || echo "There is no wlock"
  There is no wlock

* Test setting both locks

  $ dolock -Ss &
  $ waitlock .hg/wlock && waitlock .hg/store/lock

  $ hg debuglocks
  lock:  user *, process * (*s) (glob)
  wlock: user *, process * (*s) (glob)
  [2]

* Test failing to set a lock

  $ hg debuglocks -s
  abort: lock is already held
  [255]

  $ hg debuglocks -S
  abort: wlock is already held
  [255]

  $ touch .hg/unlock
  $ wait

  $ hg debuglocks
  lock:  free
  wlock: free

* Test forcing the lock

  $ dolock -s &
  $ waitlock .hg/store/lock

  $ hg debuglocks
  lock:  user *, process * (*s) (glob)
  wlock: free
  [1]

  $ hg debuglocks -L

  $ hg debuglocks
  lock:  free
  wlock: free

  $ touch .hg/unlock
  $ wait

* Test forcing the wlock

  $ dolock -S &
  $ waitlock .hg/wlock

  $ hg debuglocks
  lock:  free
  wlock: user *, process * (*s) (glob)
  [1]

  $ hg debuglocks -W

  $ hg debuglocks
  lock:  free
  wlock: free

  $ touch .hg/unlock
  $ wait

Test WdirUnsupported exception

  $ hg debugdata -c ffffffffffffffffffffffffffffffffffffffff
  abort: working directory revision cannot be specified
  [255]

Test cache warming command

  $ rm -rf .hg/cache/
  $ hg debugupdatecaches --debug
  updating the branch cache
  $ ls -r .hg/cache/*
  .hg/cache/rbc-revs-v1
  .hg/cache/rbc-names-v1
  .hg/cache/branch2-served

  $ cd ..

Test internal debugstacktrace command

  $ cat > debugstacktrace.py << EOF
  > from __future__ import absolute_import
  > import sys
  > from mercurial import util
  > def f():
  >     util.debugstacktrace(f=sys.stdout)
  >     g()
  > def g():
  >     util.dst('hello from g\\n', skip=1)
  >     h()
  > def h():
  >     util.dst('hi ...\\nfrom h hidden in g', 1, depth=2)
  > f()
  > EOF
  $ $PYTHON debugstacktrace.py
  stacktrace at:
   debugstacktrace.py:12 in * (glob)
   debugstacktrace.py:5  in f
  hello from g at:
   debugstacktrace.py:12 in * (glob)
   debugstacktrace.py:6  in f
  hi ...
  from h hidden in g at:
   debugstacktrace.py:6 in f
   debugstacktrace.py:9 in g

Test debugcapabilities command:

  $ hg debugcapabilities ./debugrevlog/
  Main capabilities:
    branchmap
    $USUAL_BUNDLE2_CAPS$
    getbundle
    known
    lookup
    pushkey
    unbundle
  Bundle2 capabilities:
    HG20
    bookmarks
    changegroup
      01
      02
    digests
      md5
      sha1
      sha512
    error
      abort
      unsupportedcontent
      pushraced
      pushkey
    hgtagsfnodes
    listkeys
    phases
      heads
    pushkey
    remote-changegroup
      http
      https