mercurial/changelog.py

changegroup: fix pulling to treemanifest repo from flat repo (issue5066)

In c0f11347b107 (changegroup: don't support versions 01 and 02 with
treemanifests, 2016-01-19), I stopped supporting use of cg1 and cg2
with treemanifest repos. What I had not considered was that it's
perfectly safe to pull *to* a treemanifest repo using any changegroup
version. As reported in issue5066, I therefore broke pull from old
repos into a treemanifest repo. It was not covered by the test case,
because that pulled from a local repo while enabling treemanifests,
which enabled treemanifests on the source repo as well. After
switching to pulling via HTTP, it breaks.

Fix by splitting up changegroup.supportedversions() into
supportedincomingversions() and supportedoutgoingversions().

# changelog.py - changelog class for mercurial
#
# Copyright 2005-2007 Matt Mackall <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from __future__ import absolute_import

from .i18n import _
from .node import (
    bin,
    hex,
    nullid,
)

from . import (
    encoding,
    error,
    revlog,
    util,
)

_defaultextra = {'branch': 'default'}

def _string_escape(text):
    """
    >>> d = {'nl': chr(10), 'bs': chr(92), 'cr': chr(13), 'nul': chr(0)}
    >>> s = "ab%(nl)scd%(bs)s%(bs)sn%(nul)sab%(cr)scd%(bs)s%(nl)s" % d
    >>> s
    'ab\\ncd\\\\\\\\n\\x00ab\\rcd\\\\\\n'
    >>> res = _string_escape(s)
    >>> s == res.decode('string_escape')
    True
    """
    # subset of the string_escape codec
    text = text.replace('\\', '\\\\').replace('\n', '\\n').replace('\r', '\\r')
    return text.replace('\0', '\\0')

def decodeextra(text):
    """
    >>> sorted(decodeextra(encodeextra({'foo': 'bar', 'baz': chr(0) + '2'})
    ...                    ).iteritems())
    [('baz', '\\x002'), ('branch', 'default'), ('foo', 'bar')]
    >>> sorted(decodeextra(encodeextra({'foo': 'bar',
    ...                                 'baz': chr(92) + chr(0) + '2'})
    ...                    ).iteritems())
    [('baz', '\\\\\\x002'), ('branch', 'default'), ('foo', 'bar')]
    """
    extra = _defaultextra.copy()
    for l in text.split('\0'):
        if l:
            if '\\0' in l:
                # fix up \0 without getting into trouble with \\0
                l = l.replace('\\\\', '\\\\\n')
                l = l.replace('\\0', '\0')
                l = l.replace('\n', '')
            k, v = l.decode('string_escape').split(':', 1)
            extra[k] = v
    return extra

def encodeextra(d):
    # keys must be sorted to produce a deterministic changelog entry
    items = [_string_escape('%s:%s' % (k, d[k])) for k in sorted(d)]
    return "\0".join(items)

def stripdesc(desc):
    """strip trailing whitespace and leading and trailing empty lines"""
    return '\n'.join([l.rstrip() for l in desc.splitlines()]).strip('\n')

class appender(object):
    '''the changelog index must be updated last on disk, so we use this class
    to delay writes to it'''
    def __init__(self, vfs, name, mode, buf):
        self.data = buf
        fp = vfs(name, mode)
        self.fp = fp
        self.offset = fp.tell()
        self.size = vfs.fstat(fp).st_size

    def end(self):
        return self.size + len("".join(self.data))
    def tell(self):
        return self.offset
    def flush(self):
        pass
    def close(self):
        self.fp.close()

    def seek(self, offset, whence=0):
        '''virtual file offset spans real file and data'''
        if whence == 0:
            self.offset = offset
        elif whence == 1:
            self.offset += offset
        elif whence == 2:
            self.offset = self.end() + offset
        if self.offset < self.size:
            self.fp.seek(self.offset)

    def read(self, count=-1):
        '''only trick here is reads that span real file and data'''
        ret = ""
        if self.offset < self.size:
            s = self.fp.read(count)
            ret = s
            self.offset += len(s)
            if count > 0:
                count -= len(s)
        if count != 0:
            doff = self.offset - self.size
            self.data.insert(0, "".join(self.data))
            del self.data[1:]
            s = self.data[0][doff:doff + count]
            self.offset += len(s)
            ret += s
        return ret

    def write(self, s):
        self.data.append(str(s))
        self.offset += len(s)

def _divertopener(opener, target):
    """build an opener that writes in 'target.a' instead of 'target'"""
    def _divert(name, mode='r'):
        if name != target:
            return opener(name, mode)
        return opener(name + ".a", mode)
    return _divert

def _delayopener(opener, target, buf):
    """build an opener that stores chunks in 'buf' instead of 'target'"""
    def _delay(name, mode='r'):
        if name != target:
            return opener(name, mode)
        return appender(opener, name, mode, buf)
    return _delay

class changelog(revlog.revlog):
    def __init__(self, opener):
        revlog.revlog.__init__(self, opener, "00changelog.i")
        if self._initempty:
            # changelogs don't benefit from generaldelta
            self.version &= ~revlog.REVLOGGENERALDELTA
            self._generaldelta = False
        self._realopener = opener
        self._delayed = False
        self._delaybuf = None
        self._divert = False
        self.filteredrevs = frozenset()

    def tip(self):
        """filtered version of revlog.tip"""
        for i in xrange(len(self) -1, -2, -1):
            if i not in self.filteredrevs:
                return self.node(i)

    def __contains__(self, rev):
        """filtered version of revlog.__contains__"""
        return (0 <= rev < len(self)
                and rev not in self.filteredrevs)

    def __iter__(self):
        """filtered version of revlog.__iter__"""
        if len(self.filteredrevs) == 0:
            return revlog.revlog.__iter__(self)

        def filterediter():
            for i in xrange(len(self)):
                if i not in self.filteredrevs:
                    yield i

        return filterediter()

    def revs(self, start=0, stop=None):
        """filtered version of revlog.revs"""
        for i in super(changelog, self).revs(start, stop):
            if i not in self.filteredrevs:
                yield i

    @util.propertycache
    def nodemap(self):
        # XXX need filtering too
        self.rev(self.node(0))
        return self._nodecache

    def reachableroots(self, minroot, heads, roots, includepath=False):
        return self.index.reachableroots2(minroot, heads, roots, includepath)

    def headrevs(self):
        if self.filteredrevs:
            try:
                return self.index.headrevsfiltered(self.filteredrevs)
            # AttributeError covers non-c-extension environments and
            # old c extensions without filter handling.
            except AttributeError:
                return self._headrevs()

        return super(changelog, self).headrevs()

    def strip(self, *args, **kwargs):
        # XXX make something better than assert
        # We can't expect proper strip behavior if we are filtered.
        assert not self.filteredrevs
        super(changelog, self).strip(*args, **kwargs)

    def rev(self, node):
        """filtered version of revlog.rev"""
        r = super(changelog, self).rev(node)
        if r in self.filteredrevs:
            raise error.FilteredLookupError(hex(node), self.indexfile,
                                            _('filtered node'))
        return r

    def node(self, rev):
        """filtered version of revlog.node"""
        if rev in self.filteredrevs:
            raise error.FilteredIndexError(rev)
        return super(changelog, self).node(rev)

    def linkrev(self, rev):
        """filtered version of revlog.linkrev"""
        if rev in self.filteredrevs:
            raise error.FilteredIndexError(rev)
        return super(changelog, self).linkrev(rev)

    def parentrevs(self, rev):
        """filtered version of revlog.parentrevs"""
        if rev in self.filteredrevs:
            raise error.FilteredIndexError(rev)
        return super(changelog, self).parentrevs(rev)

    def flags(self, rev):
        """filtered version of revlog.flags"""
        if rev in self.filteredrevs:
            raise error.FilteredIndexError(rev)
        return super(changelog, self).flags(rev)

    def delayupdate(self, tr):
        "delay visibility of index updates to other readers"

        if not self._delayed:
            if len(self) == 0:
                self._divert = True
                if self._realopener.exists(self.indexfile + '.a'):
                    self._realopener.unlink(self.indexfile + '.a')
                self.opener = _divertopener(self._realopener, self.indexfile)
            else:
                self._delaybuf = []
                self.opener = _delayopener(self._realopener, self.indexfile,
                                           self._delaybuf)
        self._delayed = True
        tr.addpending('cl-%i' % id(self), self._writepending)
        tr.addfinalize('cl-%i' % id(self), self._finalize)

    def _finalize(self, tr):
        "finalize index updates"
        self._delayed = False
        self.opener = self._realopener
        # move redirected index data back into place
        if self._divert:
            assert not self._delaybuf
            tmpname = self.indexfile + ".a"
            nfile = self.opener.open(tmpname)
            nfile.close()
            self.opener.rename(tmpname, self.indexfile)
        elif self._delaybuf:
            fp = self.opener(self.indexfile, 'a')
            fp.write("".join(self._delaybuf))
            fp.close()
            self._delaybuf = None
        self._divert = False
        # split when we're done
        self.checkinlinesize(tr)

    def readpending(self, file):
        """read index data from a "pending" file

        During a transaction, the actual changeset data is already stored in the
        main file, but not yet finalized in the on-disk index. Instead, a
        "pending" index is written by the transaction logic. If this function
        is running, we are likely in a subprocess invoked in a hook. The
        subprocess is informed that it is within a transaction and needs to
        access its content.

        This function will read all the index data out of the pending file and
        overwrite the main index."""

        if not self.opener.exists(file):
            return # no pending data for changelog
        r = revlog.revlog(self.opener, file)
        self.index = r.index
        self.nodemap = r.nodemap
        self._nodecache = r._nodecache
        self._chunkcache = r._chunkcache

    def _writepending(self, tr):
        "create a file containing the unfinalized state for pretxnchangegroup"
        if self._delaybuf:
            # make a temporary copy of the index
            fp1 = self._realopener(self.indexfile)
            pendingfilename = self.indexfile + ".a"
            # register as a temp file to ensure cleanup on failure
            tr.registertmp(pendingfilename)
            # write existing data
            fp2 = self._realopener(pendingfilename, "w")
            fp2.write(fp1.read())
            # add pending data
            fp2.write("".join(self._delaybuf))
            fp2.close()
            # switch modes so finalize can simply rename
            self._delaybuf = None
            self._divert = True
            self.opener = _divertopener(self._realopener, self.indexfile)

        if self._divert:
            return True

        return False

    def checkinlinesize(self, tr, fp=None):
        if not self._delayed:
            revlog.revlog.checkinlinesize(self, tr, fp)

    def read(self, node):
        """
        format used:
        nodeid\n        : manifest node in ascii
        user\n          : user, no \n or \r allowed
        time tz extra\n : date (time is int or float, timezone is int)
                        : extra is metadata, encoded and separated by '\0'
                        : older versions ignore it
        files\n\n       : files modified by the cset, no \n or \r allowed
        (.*)            : comment (free text, ideally utf-8)

        changelog v0 doesn't use extra
        """
        text = self.revision(node)
        if not text:
            return (nullid, "", (0, 0), [], "", _defaultextra)
        last = text.index("\n\n")
        desc = encoding.tolocal(text[last + 2:])
        l = text[:last].split('\n')
        manifest = bin(l[0])
        user = encoding.tolocal(l[1])

        tdata = l[2].split(' ', 2)
        if len(tdata) != 3:
            time = float(tdata[0])
            try:
                # various tools did silly things with the time zone field.
                timezone = int(tdata[1])
            except ValueError:
                timezone = 0
            extra = _defaultextra
        else:
            time, timezone = float(tdata[0]), int(tdata[1])
            extra = decodeextra(tdata[2])

        files = l[3:]
        return (manifest, user, (time, timezone), files, desc, extra)

    def readfiles(self, node):
        """
        short version of read that only returns the files modified by the cset
        """
        text = self.revision(node)
        if not text:
            return []
        last = text.index("\n\n")
        l = text[:last].split('\n')
        return l[3:]

    def add(self, manifest, files, desc, transaction, p1, p2,
                  user, date=None, extra=None):
        # Convert to UTF-8 encoded bytestrings as the very first
        # thing: calling any method on a localstr object will turn it
        # into a str object and the cached UTF-8 string is thus lost.
        user, desc = encoding.fromlocal(user), encoding.fromlocal(desc)

        user = user.strip()
        # An empty username or a username with a "\n" will make the
        # revision text contain two "\n\n" sequences -> corrupt
        # repository since read cannot unpack the revision.
        if not user:
            raise error.RevlogError(_("empty username"))
        if "\n" in user:
            raise error.RevlogError(_("username %s contains a newline")
                                    % repr(user))

        desc = stripdesc(desc)

        if date:
            parseddate = "%d %d" % util.parsedate(date)
        else:
            parseddate = "%d %d" % util.makedate()
        if extra:
            branch = extra.get("branch")
            if branch in ("default", ""):
                del extra["branch"]
            elif branch in (".", "null", "tip"):
                raise error.RevlogError(_('the name \'%s\' is reserved')
                                        % branch)
        if extra:
            extra = encodeextra(extra)
            parseddate = "%s %s" % (parseddate, extra)
        l = [hex(manifest), user, parseddate] + sorted(files) + ["", desc]
        text = "\n".join(l)
        return self.addrevision(text, transaction, len(self), p1, p2)

    def branchinfo(self, rev):
        """return the branch name and open/close state of a revision

        This function exists because creating a changectx object
        just to access this is costly."""
        extra = self.read(rev)[5]
        return encoding.tolocal(extra.get("branch")), 'close' in extra