annotate hgext/fastannotate/revmap.py @ 52033:88aa21d654e5

rust-dirstate: actually remember the identity

This was an oversight that likely had no influence on anything since we have
only been writing the dirstate for status. We will start writing the dirstate
for more operations now, so we'll need this fixed.

# Copyright 2016-present Facebook. All Rights Reserved.
#
# revmap: trivial hg hash - linelog rev bidirectional map
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from __future__ import annotations

import bisect
import io
import os
import struct

from mercurial.node import hex
from mercurial.pycompat import open
from mercurial import (
    error as hgerror,
)
from . import error

# the revmap file format is straightforward:
#
#    8 bytes: header
#    1 byte : flag for linelog revision 1
#    ? bytes: (optional) '\0'-terminated path string
#             only exists if (flag & renameflag) != 0
#   20 bytes: hg hash for linelog revision 1
#    1 byte : flag for linelog revision 2
#    ? bytes: (optional) '\0'-terminated path string
#   20 bytes: hg hash for linelog revision 2
#   ....
#
# the implementation is kinda stupid: __init__ loads the whole revmap.
# no laziness. benchmark shows loading 10000 revisions is about 0.015
# seconds, which looks enough for our use-case. if this implementation
# becomes a bottleneck, we can change it to lazily read the file
# from the end.

# whether the changeset is in the side branch. i.e. not in the linear main
# branch but only got referenced by lines in merge changesets.
sidebranchflag = 1

# whether the changeset changes the file path (ie. is a rename)
renameflag = 2

# len(mercurial.node.nullid)
_hshlen = 20


class revmap:
    """trivial hg bin hash - linelog rev bidirectional map

    also stores a flag (uint8) for each revision, and track renames.
    """

    HEADER = b'REVMAP1\0'

    def __init__(self, path=None):
        """create or load the revmap, optionally associate to a file

        if path is None, the revmap is entirely in-memory. the caller is
        responsible for locking. concurrent writes to a same file is unsafe.
        the caller needs to make sure one file is associated to at most one
        revmap object at a time."""
        self.path = path
        self._rev2hsh = [None]
        self._rev2flag = [None]
        self._hsh2rev = {}
        # since rename does not happen frequently, do not store path for every
        # revision. self._renamerevs can be used for bisecting.
        self._renamerevs = [0]
        self._renamepaths = [b'']
        self._lastmaxrev = -1
        if path:
            if os.path.exists(path):
                self._load()
            else:
                # write the header so "append" can do incremental updates
                self.flush()

    def copyfrom(self, rhs):
        """copy the map data from another revmap. do not affect self.path"""
        self._rev2hsh = rhs._rev2hsh[:]
        self._rev2flag = rhs._rev2flag[:]
        self._hsh2rev = rhs._hsh2rev.copy()
        self._renamerevs = rhs._renamerevs[:]
        self._renamepaths = rhs._renamepaths[:]
        self._lastmaxrev = -1

    @property
    def maxrev(self):
        """return max linelog revision number"""
        return len(self._rev2hsh) - 1

    def append(self, hsh, sidebranch=False, path=None, flush=False):
        """add a binary hg hash and return the mapped linelog revision.
        if flush is True, incrementally update the file.
        """
        if hsh in self._hsh2rev:
            raise error.CorruptedFileError(
                b'%r is in revmap already' % hex(hsh)
            )
        if len(hsh) != _hshlen:
            raise hgerror.ProgrammingError(
                b'hsh must be %d-char long' % _hshlen
            )
        idx = len(self._rev2hsh)
        flag = 0
        if sidebranch:
            flag |= sidebranchflag
        if path is not None and path != self._renamepaths[-1]:
            flag |= renameflag
            self._renamerevs.append(idx)
            self._renamepaths.append(path)
        self._rev2hsh.append(hsh)
        self._rev2flag.append(flag)
        self._hsh2rev[hsh] = idx
        if flush:
            self.flush()
        return idx

    def rev2hsh(self, rev):
        """convert linelog revision to hg hash. return None if not found."""
        if rev > self.maxrev or rev < 0:
            return None
        return self._rev2hsh[rev]

    def rev2flag(self, rev):
        """get the flag (uint8) for a given linelog revision.
        return None if revision does not exist.
        """
        if rev > self.maxrev or rev < 0:
            return None
        return self._rev2flag[rev]

    def rev2path(self, rev):
        """get the path for a given linelog revision.
        return None if revision does not exist.
        """
        if rev > self.maxrev or rev < 0:
            return None
        idx = bisect.bisect_right(self._renamerevs, rev) - 1
        return self._renamepaths[idx]

    def hsh2rev(self, hsh):
        """convert hg hash to linelog revision. return None if not found."""
        return self._hsh2rev.get(hsh)

    def clear(self, flush=False):
        """make the map empty. if flush is True, write to disk"""
        # rev 0 is reserved, real rev starts from 1
        self._rev2hsh = [None]
        self._rev2flag = [None]
        self._hsh2rev = {}
        self._rev2path = [b'']
        self._lastmaxrev = -1
        if flush:
            self.flush()

    def flush(self):
        """write the state down to the file"""
        if not self.path:
            return
        if self._lastmaxrev == -1:  # write the entire file
            with open(self.path, b'wb') as f:
                f.write(self.HEADER)
                for i in range(1, len(self._rev2hsh)):
                    self._writerev(i, f)
        else:  # append incrementally
            with open(self.path, b'ab') as f:
                for i in range(self._lastmaxrev + 1, len(self._rev2hsh)):
                    self._writerev(i, f)
        self._lastmaxrev = self.maxrev

    def _load(self):
        """load state from file"""
        if not self.path:
            return
        # use local variables in a loop. CPython uses LOAD_FAST for them,
        # which is faster than both LOAD_CONST and LOAD_GLOBAL.
        flaglen = 1
        hshlen = _hshlen
        with open(self.path, b'rb') as f:
            if f.read(len(self.HEADER)) != self.HEADER:
                raise error.CorruptedFileError()
            self.clear(flush=False)
            while True:
                buf = f.read(flaglen)
                if not buf:
                    break
                flag = ord(buf)
                rev = len(self._rev2hsh)
                if flag & renameflag:
                    path = self._readcstr(f)
                    self._renamerevs.append(rev)
                    self._renamepaths.append(path)
                hsh = f.read(hshlen)
                if len(hsh) != hshlen:
                    raise error.CorruptedFileError()
                self._hsh2rev[hsh] = rev
                self._rev2flag.append(flag)
                self._rev2hsh.append(hsh)
        self._lastmaxrev = self.maxrev

    def _writerev(self, rev, f):
        """append a revision data to file"""
        flag = self._rev2flag[rev]
        hsh = self._rev2hsh[rev]
        f.write(struct.pack(b'B', flag))
        if flag & renameflag:
            path = self.rev2path(rev)
            if path is None:
                raise error.CorruptedFileError(b'cannot find path for %s' % rev)
            f.write(path + b'\0')
        f.write(hsh)

    @staticmethod
    def _readcstr(f):
        """read a C-language-like '\0'-terminated string"""
        buf = b''
        while True:
            ch = f.read(1)
            if not ch:  # unexpected eof
                raise error.CorruptedFileError()
            if ch == b'\0':
                break
            buf += ch
        return buf

    def __contains__(self, f):
        """(fctx or (node, path)) -> bool.
        test if (node, path) is in the map, and is not in a side branch.
        f can be either a tuple of (node, path), or a fctx.
        """
        if isinstance(f, tuple):  # f: (node, path)
            hsh, path = f
        else:  # f: fctx
            hsh, path = f.node(), f.path()
        rev = self.hsh2rev(hsh)
        if rev is None:
            return False
        if path is not None and path != self.rev2path(rev):
            return False
        return (self.rev2flag(rev) & sidebranchflag) == 0


def getlastnode(path):
    """return the last hash in a revmap, without loading its full content.
    this is equivalent to `m = revmap(path); m.rev2hsh(m.maxrev)`, but faster.
    """
    hsh = None
    try:
        with open(path, b'rb') as f:
            f.seek(-_hshlen, io.SEEK_END)
            if f.tell() > len(revmap.HEADER):
                hsh = f.read(_hshlen)
    except IOError:
        pass
    return hsh