tests/test-add.t

match: convert O(n) to O(log n) in exactmatcher.visitchildrenset

When using narrow, during rebase this is called (at least) once per directory in
the set of files in the commit being rebased. Every time it's called, we did the
set arithmetic (now extracted and cached), which was probably pretty cheap but
not necessary to repeat each time, looped over every item in the matcher and
kept things that started with the directory we were querying.

With very large narrowspecs, and a commit that touched a file in a large number
of directories, this was slow. In a pathological repo, the rebase of a single
commit (that touched over 17k files, I believe in approximately as many
directories) with a narrowspec that had >32k entries took 8,246s of profiled
time, with 5,007s of that spent in visitchildrenset (transitively). With this
change, the time spent in visitchildrenset is less than 34s (which is where my
profile cut off). Most of the remaining time was network access due to our
custom remotefilelog-based setup not properly prefetching.

Differential Revision: https://phab.mercurial-scm.org/D10294

  $ hg init a
  $ cd a
  $ echo a > a
  $ hg add -n
  adding a
  $ hg st
  ? a
  $ hg add
  adding a
  $ hg st
  A a
  $ hg forget a
  $ hg add
  adding a
  $ hg forget a
  $ hg add --color debug
  [ui.addremove.added ui.status|adding a]
  $ hg st
  A a
  $ mkdir dir
  $ cd dir
  $ hg add ../a
  ../a already tracked!
  $ cd ..

  $ echo b > b
  $ hg add -n b
  $ hg st
  A a
  ? b
  $ hg add b
  $ hg st
  A a
  A b

should fail

  $ hg add b
  b already tracked!
  $ hg st
  A a
  A b

#if no-windows
  $ echo foo > con.xml
  $ hg --config ui.portablefilenames=jump add con.xml
  config error: ui.portablefilenames value is invalid ('jump')
  [30]
  $ hg --config ui.portablefilenames=abort add con.xml
  abort: filename contains 'con', which is reserved on Windows: con.xml
  [10]
  $ hg st
  A a
  A b
  ? con.xml
  $ hg add con.xml
  warning: filename contains 'con', which is reserved on Windows: con.xml
  $ hg st
  A a
  A b
  A con.xml
  $ hg forget con.xml
  $ rm con.xml
#endif

#if eol-in-paths
  $ echo bla > 'hello:world'
  $ hg --config ui.portablefilenames=abort add
  adding hello:world
  abort: filename contains ':', which is reserved on Windows: 'hello:world'
  [10]
  $ hg st
  A a
  A b
  ? hello:world
  $ hg --config ui.portablefilenames=ignore add
  adding hello:world
  $ hg st
  A a
  A b
  A hello:world
#endif

  $ hg ci -m 0 --traceback

  $ hg log -r "heads(. or wdir() & file('**'))"
  changeset:   0:* (glob)
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     0
  
should fail

  $ hg add a
  a already tracked!

  $ echo aa > a
  $ hg ci -m 1
  $ hg up 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo aaa > a
  $ hg ci -m 2
  created new head

  $ hg merge
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ hg st
  M a
  ? a.orig

wdir doesn't cause a crash, and can be dynamically selected if dirty

  $ hg log -r "heads(. or wdir() & file('**'))"
  changeset:   2147483647:ffffffffffff
  parent:      2:* (glob)
  parent:      1:* (glob)
  user:        test
  date:        * (glob)
  
should fail

  $ hg add a
  a already tracked!
  $ hg st
  M a
  ? a.orig
  $ hg resolve -m a
  (no more unresolved files)
  $ hg ci -m merge

Issue683: peculiarity with hg revert of an removed then added file

  $ hg forget a
  $ hg add a
  $ hg st
  ? a.orig
  $ hg rm a
  $ hg st
  R a
  ? a.orig
  $ echo a > a
  $ hg add a
  $ hg st
  M a
  ? a.orig

excluded file shouldn't be added even if it is explicitly specified

  $ hg add a.orig -X '*.orig'
  $ hg st
  M a
  ? a.orig

Forgotten file can be added back (as either clean or modified)

  $ hg forget b
  $ hg add b
  $ hg st -A b
  C b
  $ hg forget b
  $ echo modified > b
  $ hg add b
  $ hg st -A b
  M b
  $ hg revert -qC b

  $ hg add c && echo "unexpected addition of missing file"
  c: * (glob)
  [1]
  $ echo c > c
  $ hg add d c && echo "unexpected addition of missing file"
  d: * (glob)
  [1]
  $ hg st
  M a
  A c
  ? a.orig
  $ hg up -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

forget and get should have the right order: added but missing dir should be
forgotten before file with same name is added

  $ echo file d > d
  $ hg add d
  $ hg ci -md
  $ hg rm d
  $ mkdir d
  $ echo a > d/a
  $ hg add d/a
  $ rm -r d
  $ hg up -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat d
  file d

Test that adding a directory doesn't require case matching (issue4578)
#if icasefs
  $ mkdir -p CapsDir1/CapsDir
  $ echo abc > CapsDir1/CapsDir/AbC.txt
  $ mkdir CapsDir1/CapsDir/SubDir
  $ echo def > CapsDir1/CapsDir/SubDir/Def.txt

  $ hg add capsdir1/capsdir
  adding CapsDir1/CapsDir/AbC.txt
  adding CapsDir1/CapsDir/SubDir/Def.txt

  $ hg forget capsdir1/capsdir/abc.txt

  $ hg forget capsdir1/capsdir
  removing CapsDir1/CapsDir/SubDir/Def.txt

  $ hg add capsdir1
  adding CapsDir1/CapsDir/AbC.txt
  adding CapsDir1/CapsDir/SubDir/Def.txt

  $ hg ci -m "AbCDef" capsdir1/capsdir

  $ hg status -A capsdir1/capsdir
  C CapsDir1/CapsDir/AbC.txt
  C CapsDir1/CapsDir/SubDir/Def.txt

  $ hg files capsdir1/capsdir
  CapsDir1/CapsDir/AbC.txt
  CapsDir1/CapsDir/SubDir/Def.txt

  $ echo xyz > CapsDir1/CapsDir/SubDir/Def.txt
  $ hg ci -m xyz capsdir1/capsdir/subdir/def.txt

  $ hg revert -r '.^' capsdir1/capsdir
  reverting CapsDir1/CapsDir/SubDir/Def.txt

The conditional tests above mean the hash on the diff line differs on Windows
and OS X
  $ hg diff capsdir1/capsdir
  diff -r * CapsDir1/CapsDir/SubDir/Def.txt (glob)
  --- a/CapsDir1/CapsDir/SubDir/Def.txt	Thu Jan 01 00:00:00 1970 +0000
  +++ b/CapsDir1/CapsDir/SubDir/Def.txt	* (glob)
  @@ -1,1 +1,1 @@
  -xyz
  +def

  $ hg mv CapsDir1/CapsDir/abc.txt CapsDir1/CapsDir/ABC.txt
  $ hg ci -m "case changing rename" CapsDir1/CapsDir/AbC.txt CapsDir1/CapsDir/ABC.txt

  $ hg status -A capsdir1/capsdir
  M CapsDir1/CapsDir/SubDir/Def.txt
  C CapsDir1/CapsDir/ABC.txt

  $ hg remove -f 'glob:**.txt' -X capsdir1/capsdir
  $ hg remove -f 'glob:**.txt' -I capsdir1/capsdir
  removing CapsDir1/CapsDir/ABC.txt
  removing CapsDir1/CapsDir/SubDir/Def.txt
#endif

  $ cd ..

test --dry-run mode in forget

  $ hg init testdir_forget
  $ cd testdir_forget
  $ echo foo > foo
  $ hg add foo
  $ hg commit -m "foo"
  $ hg forget foo --dry-run -v
  removing foo
  $ hg diff
  $ hg forget not_exist -n
  not_exist: $ENOENT$
  [1]

  $ cd ..

test --interactive mode in forget

  $ hg init interactiveforget
  $ cd interactiveforget
  $ echo foo > foo
  $ hg commit -qAm "foo"
  $ echo bar > bar
  $ hg commit -qAm "bar"
  $ hg forget foo --dry-run -i
  abort: cannot specify both --dry-run and --interactive
  [10]

  $ hg forget foo --config ui.interactive=True -i << EOF
  > ?
  > n
  > EOF
  forget foo [Ynsa?] ?
  y - yes, forget this file
  n - no, skip this file
  s - skip remaining files
  a - include all remaining files
  ? - ? (display help)
  forget foo [Ynsa?] n

  $ hg forget foo bar --config ui.interactive=True -i << EOF
  > y
  > n
  > EOF
  forget bar [Ynsa?] y
  forget foo [Ynsa?] n
  removing bar
  $ hg status
  R bar
  $ hg up -qC .

  $ hg forget foo bar --config ui.interactive=True -i << EOF
  > s
  > EOF
  forget bar [Ynsa?] s
  $ hg st
  $ hg up -qC .

  $ hg forget foo bar --config ui.interactive=True -i << EOF
  > a
  > EOF
  forget bar [Ynsa?] a
  removing bar
  removing foo
  $ hg status
  R bar
  R foo
  $ hg up -qC .

  $ cd ..