tests/test-symlinks.t

match: convert O(n) to O(log n) in exactmatcher.visitchildrenset

When using narrow, during rebase this is called (at least) once per directory in
the set of files in the commit being rebased. Every time it's called, we did the
set arithmetic (now extracted and cached), which was probably pretty cheap but
not necessary to repeat each time, looped over every item in the matcher and
kept things that started with the directory we were querying.

With very large narrowspecs, and a commit that touched a file in a large number
of directories, this was slow. In a pathological repo, the rebase of a single
commit (that touched over 17k files, I believe in approximately as many
directories) with a narrowspec that had >32k entries took 8,246s of profiled
time, with 5,007s of that spent in visitchildrenset (transitively). With this
change, the time spent in visitchildrenset is less than 34s (which is where my
profile cut off). Most of the remaining time was network access due to our
custom remotefilelog-based setup not properly prefetching.

Differential Revision: https://phab.mercurial-scm.org/D10294

#require symlink

== tests added in 0.7 ==

  $ hg init test-symlinks-0.7; cd test-symlinks-0.7;
  $ touch foo; ln -s foo bar; ln -s nonexistent baz

import with add and addremove -- symlink walking should _not_ screwup.

  $ hg add
  adding bar
  adding baz
  adding foo
  $ hg forget bar baz foo
  $ hg addremove
  adding bar
  adding baz
  adding foo

commit -- the symlink should _not_ appear added to dir state

  $ hg commit -m 'initial'

  $ touch bomb

again, symlink should _not_ show up on dir state

  $ hg addremove
  adding bomb

Assert screamed here before, should go by without consequence

  $ hg commit -m 'is there a bug?'
  $ cd ..


== fifo & ignore ==

  $ hg init test; cd test;

  $ mkdir dir
  $ touch a.c dir/a.o dir/b.o

test what happens if we want to trick hg

  $ hg commit -A -m 0
  adding a.c
  adding dir/a.o
  adding dir/b.o
  $ echo "relglob:*.o" > .hgignore
  $ rm a.c
  $ rm dir/a.o
  $ rm dir/b.o
  $ mkdir dir/a.o
  $ ln -s nonexistent dir/b.o
  $ mkfifo a.c

it should show a.c, dir/a.o and dir/b.o deleted

  $ hg status
  M dir/b.o
  ! a.c
  ! dir/a.o
  ? .hgignore
  $ hg status a.c
  a.c: unsupported file type (type is fifo)
  ! a.c
  $ cd ..


== symlinks from outside the tree ==

test absolute path through symlink outside repo

  $ p=`pwd`
  $ hg init x
  $ ln -s x y
  $ cd x
  $ touch f
  $ hg add f
  $ hg status "$p"/y/f
  A f

try symlink outside repo to file inside

  $ ln -s x/f ../z

this should fail

  $ hg status ../z && { echo hg mistakenly exited with status 0; exit 1; } || :
  abort: ../z not under root '$TESTTMP/x'
  $ cd ..


== cloning symlinks ==
  $ hg init clone; cd clone;

try cloning symlink in a subdir
1. commit a symlink

  $ mkdir -p a/b/c
  $ cd a/b/c
  $ ln -s /path/to/symlink/source demo
  $ cd ../../..
  $ hg stat
  ? a/b/c/demo
  $ hg commit -A -m 'add symlink in a/b/c subdir'
  adding a/b/c/demo

2. clone it

  $ cd ..
  $ hg clone clone clonedest
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved


== symlink and git diffs ==

git symlink diff

  $ cd clonedest
  $ hg diff --git -r null:tip
  diff --git a/a/b/c/demo b/a/b/c/demo
  new file mode 120000
  --- /dev/null
  +++ b/a/b/c/demo
  @@ -0,0 +1,1 @@
  +/path/to/symlink/source
  \ No newline at end of file
  $ hg export --git tip > ../sl.diff

import git symlink diff

  $ hg rm a/b/c/demo
  $ hg commit -m'remove link'
  $ hg import ../sl.diff
  applying ../sl.diff
  $ hg diff --git -r 1:tip
  diff --git a/a/b/c/demo b/a/b/c/demo
  new file mode 120000
  --- /dev/null
  +++ b/a/b/c/demo
  @@ -0,0 +1,1 @@
  +/path/to/symlink/source
  \ No newline at end of file

== symlinks and addremove ==

directory moved and symlinked

  $ mkdir foo
  $ touch foo/a
  $ hg ci -Ama
  adding foo/a
  $ mv foo bar
  $ ln -s bar foo
  $ hg status
  ! foo/a
  ? bar/a
  ? foo

now addremove should remove old files

  $ hg addremove
  adding bar/a
  adding foo
  removing foo/a

commit and update back

  $ hg ci -mb
  $ hg up '.^'
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ hg up tip
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved

  $ cd ..

== root of repository is symlinked ==

  $ hg init root
  $ ln -s root link
  $ cd root
  $ echo foo > foo
  $ hg status
  ? foo
  $ hg status ../link
  ? foo
  $ hg add foo
  $ hg cp foo "$TESTTMP/link/bar"
  foo has not been committed yet, so no copy data will be stored for bar.
  $ cd ..


  $ hg init b
  $ cd b
  $ ln -s nothing dangling
  $ hg commit -m 'commit symlink without adding' dangling
  abort: dangling: file not tracked!
  [10]
  $ hg add dangling
  $ hg commit -m 'add symlink'

  $ hg tip -v
  changeset:   0:cabd88b706fc
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       dangling
  description:
  add symlink
  
  
  $ hg manifest --debug
  2564acbe54bbbedfbf608479340b359f04597f80 644 @ dangling
  $ readlink.py dangling
  dangling -> nothing

  $ rm dangling
  $ ln -s void dangling
  $ hg commit -m 'change symlink'
  $ readlink.py dangling
  dangling -> void


modifying link

  $ rm dangling
  $ ln -s empty dangling
  $ readlink.py dangling
  dangling -> empty


reverting to rev 0:

  $ hg revert -r 0 -a
  reverting dangling
  $ readlink.py dangling
  dangling -> nothing


backups:

  $ readlink.py *.orig
  dangling.orig -> empty
  $ rm *.orig
  $ hg up -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

copies

  $ hg cp -v dangling dangling2
  copying dangling to dangling2
  $ hg st -Cmard
  A dangling2
    dangling
  $ readlink.py dangling dangling2
  dangling -> void
  dangling2 -> void


Issue995: hg copy -A incorrectly handles symbolic links

  $ hg up -C
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ mkdir dir
  $ ln -s dir dirlink
  $ hg ci -qAm 'add dirlink'
  $ mkdir newdir
  $ mv dir newdir/dir
  $ mv dirlink newdir/dirlink
  $ hg mv -A dirlink newdir/dirlink

  $ cd ..