annotate tests/test-dirstate-race.t @ 36037:8de90e006c78

run-tests: report tests that exception occurred in

We now record the test that an exception occurred in. We put this
information to use by aggregating the count of failures in each
test. For each exception, the exception report now prints the total
number of tests having that exception and the test with the least
number of exceptions exhibiting that failure. The exception list
is now sorted by (total count, tests impacted, count of failures
in least failing test).

This allows us to:

* Assess how widespread a failure is. Some exceptions occur a lot
  in a few tests. Others occur over many tests.
* Easily run a test exhibiting an exception without having to find
  a failure in test output.
* Find and fix low hanging fruit (e.g. exceptions that are the
  only failure in a test).

Here's an example of the new output:

199 (4 tests)   /home/gps/src/hg/hgext/blackbox.py:191: %b requires a bytes-like object, or an object that implements __bytes__, not 'str' (test-devel-warnings.t - 1 total)
142 (19 tests)  /home/gps/src/hg/hgext/mq.py:655: list indices must be integers or slices, not bytes (test-hardlinks.t - 1 total)
140 (20 tests)  /home/gps/src/hg/mercurial/patch.py:296: string argument expected, got 'bytes' (test-audit-subrepo.t - 1 total)
101 (15 tests)  /home/gps/src/hg/hgext/convert/convcmd.py:60: encode() argument 1 must be str, not bytes (test-convert-clonebranches.t - 1 total)
90 (2 tests)    /home/gps/src/hg/hgext/mq.py:456: can't concat str to bytes (test-mq-qqueue.t - 1 total)
87 (2 tests)    /home/gps/src/hg/mercurial/branchmap.py:380: %b requires a bytes-like object, or an object that implements __bytes__, not 'FileNotFoundError' (test-branches.t - 2 total)
85 (22 tests)   /home/gps/src/hg/mercurial/sshpeer.py:223: cannot convert 'UUID' object to bytes (test-bundle2-pushback.t - 1 total)
1 (1 tests)     /home/gps/src/hg/mercurial/formatter.py:254: %b requires a bytes-like object, or an object that implements __bytes__, not 'str' (test-debugextensions.t - 2 total)
1 (1 tests)     /home/gps/src/hg/hgext/convert/convcmd.py:420: startswith first arg must be str or a tuple of str, not bytes (test-convert-authormap.t - 2 total)
1 (1 tests)     /home/gps/src/hg/mercurial/revlog.py:797: '>=' not supported between instances of 'NoneType' and 'int' (test-unionrepo.t - 1 total)
1 (1 tests)     /home/gps/src/hg/hgext/show.py:129: %b requires a bytes-like object, or an object that implements __bytes__, not 'str' (test-show.t - 1 total)

Differential Revision: https://phab.mercurial-scm.org/D2138

  $ hg init repo
  $ cd repo
  $ echo a > a
  $ hg add a
  $ hg commit -m test

Do we ever miss a sub-second change?:

  $ for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20; do
  >     hg co -qC 0
  >     echo b > a
  >     hg st
  > done
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a

  $ echo test > b
  $ mkdir dir1
  $ echo test > dir1/c
  $ echo test > d

  $ echo test > e
#if execbit
A directory will typically have the execute bit -- make sure it doesn't get
confused with a file with the exec bit set
  $ chmod +x e
#endif

  $ hg add b dir1 d e
  adding dir1/c
  $ hg commit -m test2

  $ cat >> $TESTTMP/dirstaterace.py << EOF
  > from mercurial import (
  >     context,
  >     extensions,
  > )
  > def extsetup():
  >     extensions.wrapfunction(context.workingctx, '_checklookup', overridechecklookup)
  > def overridechecklookup(orig, self, files):
  >     # make an update that changes the dirstate from underneath
  >     self._repo.ui.system(r"sh '$TESTTMP/dirstaterace.sh'",
  >                          cwd=self._repo.root)
  >     return orig(self, files)
  > EOF

  $ hg debugrebuilddirstate
  $ hg debugdirstate
  n   0         -1 unset               a
  n   0         -1 unset               b
  n   0         -1 unset               d
  n   0         -1 unset               dir1/c
  n   0         -1 unset               e

XXX Note that this returns M for files that got replaced by directories. This is
definitely a bug, but the fix for that is hard and the next status run is fine
anyway.

  $ cat > $TESTTMP/dirstaterace.sh <<EOF
  > rm b && rm -r dir1 && rm d && mkdir d && rm e && mkdir e
  > EOF

  $ hg status --config extensions.dirstaterace=$TESTTMP/dirstaterace.py
  M d
  M e
  ! b
  ! dir1/c
  $ hg debugdirstate
  n 644          2 * a (glob)
  n   0         -1 unset               b
  n   0         -1 unset               d
  n   0         -1 unset               dir1/c
  n   0         -1 unset               e

  $ hg status
  ! b
  ! d
  ! dir1/c
  ! e

  $ rmdir d e
  $ hg update -C -q .

Test that dirstate changes aren't written out at the end of "hg
status", if .hg/dirstate is already changed simultaneously before
acquisition of wlock in workingctx._poststatusfixup().

This avoidance is important to keep consistency of dirstate in race
condition (see issue5584 for detail).

  $ hg parents -q
  1:* (glob)

  $ hg debugrebuilddirstate
  $ hg debugdirstate
  n   0         -1 unset               a
  n   0         -1 unset               b
  n   0         -1 unset               d
  n   0         -1 unset               dir1/c
  n   0         -1 unset               e

  $ cat > $TESTTMP/dirstaterace.sh <<EOF
  > # This script assumes timetable of typical issue5584 case below:
  > #
  > # 1. "hg status" loads .hg/dirstate
  > # 2. "hg status" confirms clean-ness of FILE
  > # 3. "hg update -C 0" updates the working directory simultaneously
  > #    (FILE is removed, and FILE is dropped from .hg/dirstate)
  > # 4. "hg status" acquires wlock
  > #    (.hg/dirstate is re-loaded = no FILE entry in dirstate)
  > # 5. "hg status" marks FILE in dirstate as clean
  > #    (FILE entry is added to in-memory dirstate)
  > # 6. "hg status" writes dirstate changes into .hg/dirstate
  > #    (FILE entry is written into .hg/dirstate)
  > #
  > # To reproduce similar situation easily and certainly, #2 and #3
  > # are swapped.  "hg cat" below ensures #2 on "hg status" side.
  > 
  > hg update -q -C 0
  > hg cat -r 1 b > b
  > EOF

"hg status" below should excludes "e", of which exec flag is set, for
portability of test scenario, because unsure but missing "e" is
treated differently in _checklookup() according to runtime platform.

- "missing(!)" on POSIX, "pctx[f].cmp(self[f])" raises ENOENT
- "modified(M)" on Windows, "self.flags(f) != pctx.flags(f)" is True

  $ hg status --config extensions.dirstaterace=$TESTTMP/dirstaterace.py --debug -X path:e
  skip updating dirstate: identity mismatch
  M a
  ! d
  ! dir1/c

  $ hg parents -q
  0:* (glob)
  $ hg files
  a
  $ hg debugdirstate
  n * * * a (glob)

  $ rm b

#if fsmonitor

Create fsmonitor state.

  $ hg status
  $ f --type .hg/fsmonitor.state
  .hg/fsmonitor.state: file

Test that invalidating fsmonitor state in the middle (which doesn't require the
wlock) causes the fsmonitor update to be skipped.
hg debugrebuilddirstate ensures that the dirstaterace hook will be called, but
it also invalidates the fsmonitor state. So back it up and restore it.

  $ mv .hg/fsmonitor.state .hg/fsmonitor.state.tmp
  $ hg debugrebuilddirstate
  $ mv .hg/fsmonitor.state.tmp .hg/fsmonitor.state

  $ cat > $TESTTMP/dirstaterace.sh <<EOF
  > rm .hg/fsmonitor.state
  > EOF

  $ hg status --config extensions.dirstaterace=$TESTTMP/dirstaterace.py --debug
  skip updating fsmonitor.state: identity mismatch
  $ f .hg/fsmonitor.state
  .hg/fsmonitor.state: file not found

#endif

Set up a rebase situation for issue5581.

  $ echo c2 > a
  $ echo c2 > b
  $ hg add b
  $ hg commit -m c2
  created new head
  $ echo c3 >> a
  $ hg commit -m c3
  $ hg update 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo c4 >> a
  $ echo c4 >> b
  $ hg commit -m c4
  created new head

Configure a merge tool that runs status in the middle of the rebase. The goal of
the status call is to trigger a potential bug if fsmonitor's state is written
even though the wlock is held by another process. The output of 'hg status' in
the merge tool goes to /dev/null because we're more interested in the results of
'hg status' run after the rebase.

  $ cat >> $TESTTMP/mergetool-race.sh << EOF
  > echo "custom merge tool"
  > printf "c2\nc3\nc4\n" > \$1
  > hg --cwd "$TESTTMP/repo" status > /dev/null
  > echo "custom merge tool end"
  > EOF
  $ cat >> $HGRCPATH << EOF
  > [extensions]
  > rebase =
  > [merge-tools]
  > test.executable=sh
  > test.args=$TESTTMP/mergetool-race.sh \$output
  > EOF

  $ hg rebase -s . -d 3 --tool test
  rebasing 4:b08445fd6b2a "c4" (tip)
  merging a
  custom merge tool
  custom merge tool end
  saved backup bundle to $TESTTMP/repo/.hg/strip-backup/* (glob)

This hg status should be empty, whether or not fsmonitor is enabled (issue5581).

  $ hg status