annotate tests/test-annotate.t @ 44763:94f4f2ec7dee stable

packaging: support building Inno installer with PyOxidizer

We want to start distributing Mercurial on Python 3 on
Windows. PyOxidizer will be our vehicle for achieving that.

This commit implements basic support for producing Inno
installers using PyOxidizer.

While it is an eventual goal of PyOxidizer to produce
installers, those features aren't yet implemented. So our
strategy for producing Mercurial installers is similar to
what we've been doing with py2exe: invoke a build system to
produce files then stage those files into a directory so they
can be turned into an installer.

We had to make significant alterations to the pyoxidizer.bzl
config file to get it to produce the files that we desire for
a Windows install. This meant differentiating the build targets
so we can target Windows specifically.

We've added a new module to hgpackaging to deal with interacting
with PyOxidizer. It is similar to pyexe: we invoke a build process
then copy files to a staging directory. Ideally these extra
files would be defined in pyoxidizer.bzl. But I don't think it
is worth doing at this time, as PyOxidizer's config files are
lacking some features to make this turnkey.

The rest of the change is introducing a variant of the
Inno installer code that invokes PyOxidizer instead of
py2exe.

Comparing the Python 2.7 based Inno installers with this
one, the following changes were observed:

* No lib/*.{pyd, dll} files
* No Microsoft.VC90.CRT.manifest
* No msvc{m,p,r}90.dll files
* python27.dll replaced with python37.dll
* Add vcruntime140.dll file

The disappearance of the .pyd and .dll files is acceptable, as
PyOxidizer has embedded these in hg.exe and loads them from
memory.

The disappearance of the *90* files is acceptable because those
provide the Visual C++ 9 runtime, as required by Python 2.7.
Similarly, the appearance of vcruntime140.dll is a requirement
of Python 3.7.

Differential Revision: https://phab.mercurial-scm.org/D8473

  $ cat >> "$HGRCPATH" << EOF
  > [ui]
  > merge = :merge3
  > EOF

init

  $ hg init repo
  $ cd repo

commit

  $ echo 'a' > a
  $ hg ci -A -m test -u nobody -d '1 0'
  adding a

annotate -c

  $ hg annotate -c a
  8435f90966e4: a

annotate -cl

  $ hg annotate -cl a
  8435f90966e4:1: a

annotate -d

  $ hg annotate -d a
  Thu Jan 01 00:00:01 1970 +0000: a

annotate -n

  $ hg annotate -n a
  0: a

annotate -nl

  $ hg annotate -nl a
  0:1: a

annotate -u

  $ hg annotate -u a
  nobody: a

annotate -cdnu

  $ hg annotate -cdnu a
  nobody 0 8435f90966e4 Thu Jan 01 00:00:01 1970 +0000: a

annotate -cdnul

  $ hg annotate -cdnul a
  nobody 0 8435f90966e4 Thu Jan 01 00:00:01 1970 +0000:1: a

annotate (JSON)

  $ hg annotate -Tjson a
  [
   {
    "lines": [{"line": "a\n", "rev": 0}],
    "path": "a"
   }
  ]

  $ hg annotate -Tjson -cdfnul a
  [
   {
    "lines": [{"date": [1.0, 0], "line": "a\n", "lineno": 1, "node": "8435f90966e442695d2ded29fdade2bac5ad8065", "path": "a", "rev": 0, "user": "nobody"}],
    "path": "a"
   }
  ]

log-like templating

  $ hg annotate -T'{lines % "{rev} {node|shortest}: {line}"}' a
  0 8435: a

'{lineno}' field should be populated as necessary

  $ hg annotate -T'{lines % "{rev}:{lineno}: {line}"}' a
  0:1: a
  $ hg annotate -Ta a \
  > --config templates.a='"{lines % "{rev}:{lineno}: {line}"}"'
  0:1: a

  $ cat <<EOF >>a
  > a
  > a
  > EOF
  $ hg ci -ma1 -d '1 0'
  $ hg cp a b
  $ hg ci -mb -d '1 0'
  $ cat <<EOF >> b
  > b4
  > b5
  > b6
  > EOF
  $ hg ci -mb2 -d '2 0'

default output of '{lines}' should be readable

  $ hg annotate -T'{lines}' a
  0: a
  1: a
  1: a
  $ hg annotate -T'{join(lines, "\n")}' a
  0: a
  
  1: a
  
  1: a

several filters can be applied to '{lines}'

  $ hg annotate -T'{lines|json}\n' a
  [{"line": "a\n", "rev": 0}, {"line": "a\n", "rev": 1}, {"line": "a\n", "rev": 1}]
  $ hg annotate -T'{lines|stringify}' a
  0: a
  1: a
  1: a
  $ hg annotate -T'{lines|count}\n' a
  3

annotate multiple files (JSON)

  $ hg annotate -Tjson a b
  [
   {
    "lines": [{"line": "a\n", "rev": 0}, {"line": "a\n", "rev": 1}, {"line": "a\n", "rev": 1}],
    "path": "a"
   },
   {
    "lines": [{"line": "a\n", "rev": 0}, {"line": "a\n", "rev": 1}, {"line": "a\n", "rev": 1}, {"line": "b4\n", "rev": 3}, {"line": "b5\n", "rev": 3}, {"line": "b6\n", "rev": 3}],
    "path": "b"
   }
  ]

annotate multiple files (template)

  $ hg annotate -T'== {path} ==\n{lines % "{rev}: {line}"}' a b
  == a ==
  0: a
  1: a
  1: a
  == b ==
  0: a
  1: a
  1: a
  3: b4
  3: b5
  3: b6

annotate -n b

  $ hg annotate -n b
  0: a
  1: a
  1: a
  3: b4
  3: b5
  3: b6

annotate --no-follow b

  $ hg annotate --no-follow b
  2: a
  2: a
  2: a
  3: b4
  3: b5
  3: b6

annotate -nl b

  $ hg annotate -nl b
  0:1: a
  1:2: a
  1:3: a
  3:4: b4
  3:5: b5
  3:6: b6

annotate -nf b

  $ hg annotate -nf b
  0 a: a
  1 a: a
  1 a: a
  3 b: b4
  3 b: b5
  3 b: b6

annotate -nlf b

  $ hg annotate -nlf b
  0 a:1: a
  1 a:2: a
  1 a:3: a
  3 b:4: b4
  3 b:5: b5
  3 b:6: b6

  $ hg up -C 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat <<EOF >> b
  > b4
  > c
  > b5
  > EOF
  $ hg ci -mb2.1 -d '2 0'
  created new head
  $ hg merge
  merging b
  warning: conflicts while merging b! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ cat b
  a
  a
  a
  <<<<<<< working copy: 5fbdc1152d97 - test: b2.1
  b4
  c
  b5
  ||||||| base
  =======
  b4
  b5
  b6
  >>>>>>> merge rev:    37ec9f5c3d1f - test: b2
  $ cat <<EOF > b
  > a
  > a
  > a
  > b4
  > c
  > b5
  > EOF
  $ hg resolve --mark -q
  $ rm b.orig
  $ hg ci -mmergeb -d '3 0'

annotate after merge

  $ hg annotate -nf b
  0 a: a
  1 a: a
  1 a: a
  3 b: b4
  4 b: c
  3 b: b5

annotate after merge with -l

  $ hg annotate -nlf b
  0 a:1: a
  1 a:2: a
  1 a:3: a
  3 b:4: b4
  4 b:5: c
  3 b:5: b5

  $ hg up -C 1
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg cp a b
  $ cat <<EOF > b
  > a
  > z
  > a
  > EOF
  $ hg ci -mc -d '3 0'
  created new head
Work around the pure version not resolving the conflict like native code
#if pure
  $ hg merge
  merging b
  warning: conflicts while merging b! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ cat <<EOF > b
  > a
  > z
  > a
  > b4
  > c
  > b5
  > EOF
  $ hg resolve -m b
  (no more unresolved files)
  $ rm b.orig
#else
  $ hg merge
  merging b
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
#endif
  $ echo d >> b
  $ hg ci -mmerge2 -d '4 0'

annotate after rename merge

  $ hg annotate -nf b
  0 a: a
  6 b: z
  1 a: a
  3 b: b4
  4 b: c
  3 b: b5
  7 b: d

annotate after rename merge with -l

  $ hg annotate -nlf b
  0 a:1: a
  6 b:2: z
  1 a:3: a
  3 b:4: b4
  4 b:5: c
  3 b:5: b5
  7 b:7: d

--skip nothing (should be the same as no --skip at all)

  $ hg annotate -nlf b --skip '1::0'
  0 a:1: a
  6 b:2: z
  1 a:3: a
  3 b:4: b4
  4 b:5: c
  3 b:5: b5
  7 b:7: d

--skip a modified line. Note a slight behavior difference in pure - this is
because the pure code comes up with slightly different deltas internally.

  $ hg annotate -nlf b --skip 6
  0 a:1: a
  1 a:2* z (no-pure !)
  0 a:1* z (pure !)
  1 a:3: a
  3 b:4: b4
  4 b:5: c
  3 b:5: b5
  7 b:7: d

--skip added lines (and test multiple skip)

  $ hg annotate -nlf b --skip 3
  0 a:1: a
  6 b:2: z
  1 a:3: a
  1 a:3* b4
  4 b:5: c
  1 a:3* b5
  7 b:7: d

  $ hg annotate -nlf b --skip 4
  0 a:1: a
  6 b:2: z
  1 a:3: a
  3 b:4: b4
  1 a:3* c
  3 b:5: b5
  7 b:7: d

  $ hg annotate -nlf b --skip 3 --skip 4
  0 a:1: a
  6 b:2: z
  1 a:3: a
  1 a:3* b4
  1 a:3* c
  1 a:3* b5
  7 b:7: d

  $ hg annotate -nlf b --skip 'merge()'
  0 a:1: a
  6 b:2: z
  1 a:3: a
  3 b:4: b4
  4 b:5: c
  3 b:5: b5
  3 b:5* d

--skip everything -- use the revision the file was introduced in

  $ hg annotate -nlf b --skip 'all()'
  0 a:1: a
  0 a:1* z
  0 a:1* a
  0 a:1* b4
  0 a:1* c
  0 a:1* b5
  0 a:1* d

Issue2807: alignment of line numbers with -l

  $ echo more >> b
  $ hg ci -mmore -d '5 0'
  $ echo more >> b
  $ hg ci -mmore -d '6 0'
  $ echo more >> b
  $ hg ci -mmore -d '7 0'
  $ hg annotate -nlf b
   0 a: 1: a
   6 b: 2: z
   1 a: 3: a
   3 b: 4: b4
   4 b: 5: c
   3 b: 5: b5
   7 b: 7: d
   8 b: 8: more
   9 b: 9: more
  10 b:10: more

linkrev vs rev

  $ hg annotate -r tip -n a
  0: a
  1: a
  1: a

linkrev vs rev with -l

  $ hg annotate -r tip -nl a
  0:1: a
  1:2: a
  1:3: a

Issue589: "undelete" sequence leads to crash

annotate was crashing when trying to --follow something

like A -> B -> A

generate ABA rename configuration

  $ echo foo > foo
  $ hg add foo
  $ hg ci -m addfoo
  $ hg rename foo bar
  $ hg ci -m renamefoo
  $ hg rename bar foo
  $ hg ci -m renamebar

annotate after ABA with follow

  $ hg annotate --follow foo
  foo: foo

missing file

  $ hg ann nosuchfile
  abort: nosuchfile: no such file in rev e9e6b4fa872f
  [255]

annotate file without '\n' on last line

  $ printf "" > c
  $ hg ci -A -m test -u nobody -d '1 0'
  adding c
  $ hg annotate c
  $ printf "a\nb" > c
  $ hg ci -m test
  $ hg annotate c
  [0-9]+: a (re)
  [0-9]+: b (re)

Issue3841: check annotation of the file of which filelog includes
merging between the revision and its ancestor

to reproduce the situation with recent Mercurial, this script uses (1)
"hg debugsetparents" to merge without ancestor check by "hg merge",
and (2) the extension to allow filelog merging between the revision
and its ancestor by overriding "repo._filecommit".

  $ cat > ../legacyrepo.py <<EOF
  > from __future__ import absolute_import
  > from mercurial import error, node
  > def reposetup(ui, repo):
  >     class legacyrepo(repo.__class__):
  >         def _filecommit(self, fctx, manifest1, manifest2,
  >                         linkrev, tr, changelist, includecopymeta):
  >             fname = fctx.path()
  >             text = fctx.data()
  >             flog = self.file(fname)
  >             fparent1 = manifest1.get(fname, node.nullid)
  >             fparent2 = manifest2.get(fname, node.nullid)
  >             meta = {}
  >             copy = fctx.copysource()
  >             if copy and copy != fname:
  >                 raise error.Abort('copying is not supported')
  >             if fparent2 != node.nullid:
  >                 changelist.append(fname)
  >                 return flog.add(text, meta, tr, linkrev,
  >                                 fparent1, fparent2)
  >             raise error.Abort('only merging is supported')
  >     repo.__class__ = legacyrepo
  > EOF

  $ cat > baz <<EOF
  > 1
  > 2
  > 3
  > 4
  > 5
  > EOF
  $ hg add baz
  $ hg commit -m "baz:0"

  $ cat > baz <<EOF
  > 1 baz:1
  > 2
  > 3
  > 4
  > 5
  > EOF
  $ hg commit -m "baz:1"

  $ cat > baz <<EOF
  > 1 baz:1
  > 2 baz:2
  > 3
  > 4
  > 5
  > EOF
  $ hg debugsetparents 17 17
  $ hg --config extensions.legacyrepo=../legacyrepo.py  commit -m "baz:2"
  $ hg debugindexdot baz
  digraph G {
  	-1 -> 0
  	0 -> 1
  	1 -> 2
  	1 -> 2
  }
  $ hg annotate baz
  17: 1 baz:1
  18: 2 baz:2
  16: 3
  16: 4
  16: 5

  $ cat > baz <<EOF
  > 1 baz:1
  > 2 baz:2
  > 3 baz:3
  > 4
  > 5
  > EOF
  $ hg commit -m "baz:3"

  $ cat > baz <<EOF
  > 1 baz:1
  > 2 baz:2
  > 3 baz:3
  > 4 baz:4
  > 5
  > EOF
  $ hg debugsetparents 19 18
  $ hg --config extensions.legacyrepo=../legacyrepo.py  commit -m "baz:4"
  $ hg debugindexdot baz
  digraph G {
  	-1 -> 0
  	0 -> 1
  	1 -> 2
  	1 -> 2
  	2 -> 3
  	3 -> 4
  	2 -> 4
  }
  $ hg annotate baz
  17: 1 baz:1
  18: 2 baz:2
  19: 3 baz:3
  20: 4 baz:4
  16: 5

annotate clean file

  $ hg annotate -ncr "wdir()" foo
  11 472b18db256d : foo

annotate modified file

  $ echo foofoo >> foo
  $ hg annotate -r "wdir()" foo
  11 : foo
  20+: foofoo

  $ hg annotate -cr "wdir()" foo
  472b18db256d : foo
  b6bedd5477e7+: foofoo

  $ hg annotate -ncr "wdir()" foo
  11 472b18db256d : foo
  20 b6bedd5477e7+: foofoo

  $ hg annotate --debug -ncr "wdir()" foo
  11 472b18db256d1e8282064eab4bfdaf48cbfe83cd : foo
  20 b6bedd5477e797f25e568a6402d4697f3f895a72+: foofoo

  $ hg annotate -udr "wdir()" foo
  test Thu Jan 01 00:00:00 1970 +0000: foo
  test [A-Za-z0-9:+ ]+: foofoo (re)

  $ hg annotate -ncr "wdir()" -Tjson foo
  [
   {
    "lines": [{"line": "foo\n", "node": "472b18db256d1e8282064eab4bfdaf48cbfe83cd", "rev": 11}, {"line": "foofoo\n", "node": "ffffffffffffffffffffffffffffffffffffffff", "rev": 2147483647}],
    "path": "foo"
   }
  ]

annotate added file

  $ echo bar > bar
  $ hg add bar
  $ hg annotate -ncr "wdir()" bar
  20 b6bedd5477e7+: bar

annotate renamed file

  $ hg rename foo renamefoo2
  $ hg annotate -ncr "wdir()" renamefoo2
  11 472b18db256d : foo
  20 b6bedd5477e7+: foofoo

annotate missing file

  $ rm baz

  $ hg annotate -ncr "wdir()" baz
  abort: $TESTTMP\repo\baz: $ENOENT$ (windows !)
  abort: $ENOENT$: '$TESTTMP/repo/baz' (no-windows !)
  [255]

annotate removed file

  $ hg rm baz

  $ hg annotate -ncr "wdir()" baz
  abort: $TESTTMP\repo\baz: $ENOENT$ (windows !)
  abort: $ENOENT$: '$TESTTMP/repo/baz' (no-windows !)
  [255]

  $ hg revert --all --no-backup --quiet
  $ hg id -n
  20

Test followlines() revset; we usually check both followlines(pat, range) and
followlines(pat, range, descend=True) to make sure both give the same result
when they should.

  $ echo a >> foo
  $ hg ci -m 'foo: add a'
  $ hg log -T '{rev}: {desc}\n' -r 'followlines(baz, 3:5)'
  16: baz:0
  19: baz:3
  20: baz:4
  $ hg log -T '{rev}: {desc}\n' -r 'followlines(baz, 3:5, startrev=20)'
  16: baz:0
  19: baz:3
  20: baz:4
  $ hg log -T '{rev}: {desc}\n' -r 'followlines(baz, 3:5, startrev=19)'
  16: baz:0
  19: baz:3
  $ hg log -T '{rev}: {desc}\n' -r 'followlines(baz, 3:5, startrev=19, descend=True)'
  19: baz:3
  20: baz:4
  $ printf "0\n0\n" | cat - baz > baz1
  $ mv baz1 baz
  $ hg ci -m 'added two lines with 0'
  $ hg log -T '{rev}: {desc}\n' -r 'followlines(baz, 5:7)'
  16: baz:0
  19: baz:3
  20: baz:4
  $ hg log -T '{rev}: {desc}\n' -r 'followlines(baz, 3:5, descend=true, startrev=19)'
  19: baz:3
  20: baz:4
  $ echo 6 >> baz
  $ hg ci -m 'added line 8'
  $ hg log -T '{rev}: {desc}\n' -r 'followlines(baz, 5:7)'
  16: baz:0
  19: baz:3
  20: baz:4
  $ hg log -T '{rev}: {desc}\n' -r 'followlines(baz, 3:5, startrev=19, descend=1)'
  19: baz:3
  20: baz:4
  $ sed 's/3/3+/' baz > baz.new
  $ mv baz.new baz
  $ hg ci -m 'baz:3->3+'
  $ hg log -T '{rev}: {desc}\n' -r 'followlines(baz, 5:7, descend=0)'
  16: baz:0
  19: baz:3
  20: baz:4
  24: baz:3->3+
  $ hg log -T '{rev}: {desc}\n' -r 'followlines(baz, 3:5, startrev=17, descend=True)'
  19: baz:3
  20: baz:4
  24: baz:3->3+
  $ hg log -T '{rev}: {desc}\n' -r 'followlines(baz, 1:2, descend=false)'
  22: added two lines with 0

file patterns are okay
  $ hg log -T '{rev}: {desc}\n' -r 'followlines("path:baz", 1:2)'
  22: added two lines with 0

renames are followed
  $ hg mv baz qux
  $ sed 's/4/4+/' qux > qux.new
  $ mv qux.new qux
  $ hg ci -m 'qux:4->4+'
  $ hg log -T '{rev}: {desc}\n' -r 'followlines(qux, 5:7)'
  16: baz:0
  19: baz:3
  20: baz:4
  24: baz:3->3+
  25: qux:4->4+

but are missed when following children
  $ hg log -T '{rev}: {desc}\n' -r 'followlines(baz, 5:7, startrev=22, descend=True)'
  24: baz:3->3+

merge
  $ hg up 24 --quiet
  $ echo 7 >> baz
  $ hg ci -m 'one more line, out of line range'
  created new head
  $ sed 's/3+/3-/' baz > baz.new
  $ mv baz.new baz
  $ hg ci -m 'baz:3+->3-'
  $ hg log -T '{rev}: {desc}\n' -r 'followlines(baz, 5:7)'
  16: baz:0
  19: baz:3
  20: baz:4
  24: baz:3->3+
  27: baz:3+->3-
  $ hg merge 25
  merging baz and qux to qux
  warning: conflicts while merging qux! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ cat qux
  0
  0
  1 baz:1
  2 baz:2
  <<<<<<< working copy: 863de62655ef - test: baz:3+->3-
  3- baz:3
  4 baz:4
  ||||||| base
  3+ baz:3
  4 baz:4
  =======
  3+ baz:3
  4+ baz:4
  >>>>>>> merge rev:    cb8df70ae185 - test: qux:4->4+
  5
  6
  7
  $ cat > qux <<EOF
  > 0
  > 0
  > 1 baz:1
  > 2 baz:2
  > 3- baz:3
  > 4 baz:4
  > 5
  > 6
  > 7
  > EOF
  $ hg resolve --mark -q
  $ rm qux.orig
  $ hg ci -m merge
  $ hg log -T '{rev}: {desc}\n' -r 'followlines(qux, 5:7)'
  16: baz:0
  19: baz:3
  20: baz:4
  24: baz:3->3+
  25: qux:4->4+
  27: baz:3+->3-
  28: merge
  $ hg up 25 --quiet
  $ hg merge 27
  merging qux and baz to qux
  warning: conflicts while merging qux! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ cat qux
  0
  0
  1 baz:1
  2 baz:2
  <<<<<<< working copy: cb8df70ae185 - test: qux:4->4+
  3+ baz:3
  4+ baz:4
  ||||||| base
  3+ baz:3
  4 baz:4
  =======
  3- baz:3
  4 baz:4
  >>>>>>> merge rev:    863de62655ef - test: baz:3+->3-
  5
  6
  7
  $ cat > qux <<EOF
  > 0
  > 0
  > 1 baz:1
  > 2 baz:2
  > 3+ baz:3
  > 4+ baz:4
  > 5
  > 6
  > EOF
  $ hg resolve --mark -q
  $ rm qux.orig
  $ hg ci -m 'merge from other side'
  created new head
  $ hg log -T '{rev}: {desc}\n' -r 'followlines(qux, 5:7)'
  16: baz:0
  19: baz:3
  20: baz:4
  24: baz:3->3+
  25: qux:4->4+
  27: baz:3+->3-
  29: merge from other side
  $ hg up 24 --quiet

we are missing the branch with rename when following children
  $ hg log -T '{rev}: {desc}\n' -r 'followlines(baz, 5:7, startrev=26, descend=True)'
  27: baz:3+->3-

we follow all branches in descending direction
  $ hg up 23 --quiet
  $ sed 's/3/+3/' baz > baz.new
  $ mv baz.new baz
  $ hg ci -m 'baz:3->+3'
  created new head
  $ hg log -T '{rev}: {desc}\n' -r 'followlines(baz, 2:5, startrev=16, descend=True)' --graph
  @  30: baz:3->+3
  :
  : o  27: baz:3+->3-
  : :
  : o  24: baz:3->3+
  :/
  o    20: baz:4
  |\
  | o  19: baz:3
  |/
  o  18: baz:2
  :
  o  16: baz:0
  |
  ~

Issue5595: on a merge changeset with different line ranges depending on
parent, be conservative and use the surrounding interval to avoid loosing
track of possible further descendants in specified range.

  $ hg up 23 --quiet
  $ hg cat baz -r 24
  0
  0
  1 baz:1
  2 baz:2
  3+ baz:3
  4 baz:4
  5
  6
  $ cat > baz << EOF
  > 0
  > 0
  > a
  > b
  > 3+ baz:3
  > 4 baz:4
  > y
  > z
  > EOF
  $ hg ci -m 'baz: mostly rewrite with some content from 24'
  created new head
  $ hg merge --tool :merge-other 24
  merging baz
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci -m 'merge forgetting about baz rewrite'
  $ cat > baz << EOF
  > 0
  > 0
  > 1 baz:1
  > 2+ baz:2
  > 3+ baz:3
  > 4 baz:4
  > 5
  > 6
  > EOF
  $ hg ci -m 'baz: narrow change (2->2+)'
  $ hg log -T '{rev}: {desc}\n' -r 'followlines(baz, 3:4, startrev=20, descend=True)' --graph
  @  33: baz: narrow change (2->2+)
  |
  o    32: merge forgetting about baz rewrite
  |\
  | o  31: baz: mostly rewrite with some content from 24
  | :
  | : o  30: baz:3->+3
  | :/
  +---o  27: baz:3+->3-
  | :
  o :  24: baz:3->3+
  :/
  o    20: baz:4
  |\
  ~ ~

An integer as a line range, which is parsed as '1:1'

  $ hg log -r 'followlines(baz, 1)'
  changeset:   22:2174d0bf352a
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     added two lines with 0
  

check error cases
  $ hg up 24 --quiet
  $ hg log -r 'followlines()'
  hg: parse error: followlines takes at least 1 positional arguments
  [255]
  $ hg log -r 'followlines(baz)'
  hg: parse error: followlines requires a line range
  [255]
  $ hg log -r 'followlines(baz, x)'
  hg: parse error: followlines expects a line number or a range
  [255]
  $ hg log -r 'followlines(baz, 1:2, startrev=desc("b"))'
  hg: parse error: followlines expects exactly one revision
  [255]
  $ hg log -r 'followlines("glob:*", 1:2)'
  hg: parse error: followlines expects exactly one file
  [255]
  $ hg log -r 'followlines(baz, 1:)'
  hg: parse error: line range bounds must be integers
  [255]
  $ hg log -r 'followlines(baz, :1)'
  hg: parse error: line range bounds must be integers
  [255]
  $ hg log -r 'followlines(baz, x:4)'
  hg: parse error: line range bounds must be integers
  [255]
  $ hg log -r 'followlines(baz, 5:4)'
  hg: parse error: line range must be positive
  [255]
  $ hg log -r 'followlines(baz, 0:4)'
  hg: parse error: fromline must be strictly positive
  [255]
  $ hg log -r 'followlines(baz, 2:40)'
  abort: line range exceeds file size
  [255]
  $ hg log -r 'followlines(baz, 2:4, startrev=20, descend=[1])'
  hg: parse error at 43: not a prefix: [
  (followlines(baz, 2:4, startrev=20, descend=[1])
                                              ^ here)
  [255]
  $ hg log -r 'followlines(baz, 2:4, startrev=20, descend=a)'
  hg: parse error: descend argument must be a boolean
  [255]

Test empty annotate output

  $ printf '\0' > binary
  $ touch empty
  $ hg ci -qAm 'add binary and empty files'

  $ hg annotate binary empty
  binary: binary file

  $ hg annotate -Tjson binary empty
  [
   {
    "path": "binary"
   },
   {
    "lines": [],
    "path": "empty"
   }
  ]

Test annotate with whitespace options

  $ cd ..
  $ hg init repo-ws
  $ cd repo-ws
  $ cat > a <<EOF
  > aa
  > 
  > b b
  > EOF
  $ hg ci -Am "adda"
  adding a
  $ sed 's/EOL$//g' > a <<EOF
  > a  a
  > 
  >  EOL
  > b  b
  > EOF
  $ hg ci -m "changea"

Annotate with no option

  $ hg annotate a
  1: a  a
  0: 
  1:  
  1: b  b

Annotate with --ignore-space-change

  $ hg annotate --ignore-space-change a
  1: a  a
  1: 
  0:  
  0: b  b

Annotate with --ignore-all-space

  $ hg annotate --ignore-all-space a
  0: a  a
  0: 
  1:  
  0: b  b

Annotate with --ignore-blank-lines (similar to no options case)

  $ hg annotate --ignore-blank-lines a
  1: a  a
  0: 
  1:  
  1: b  b

  $ cd ..

Annotate with orphaned CR (issue5798)
-------------------------------------

  $ hg init repo-cr
  $ cd repo-cr

  $ cat <<'EOF' >> "$TESTTMP/substcr.py"
  > import sys
  > from mercurial.utils import procutil
  > procutil.setbinary(sys.stdin)
  > procutil.setbinary(sys.stdout)
  > stdin = getattr(sys.stdin, 'buffer', sys.stdin)
  > stdout = getattr(sys.stdout, 'buffer', sys.stdout)
  > stdout.write(stdin.read().replace(b'\r', b'[CR]'))
  > EOF

  >>> with open('a', 'wb') as f:
  ...     f.write(b'0a\r0b\r\n0c\r0d\r\n0e\n0f\n0g') and None
  $ hg ci -qAm0
  >>> with open('a', 'wb') as f:
  ...     f.write(b'0a\r0b\r\n1c\r1d\r\n0e\n1f\n0g') and None
  $ hg ci -m1

  $ hg annotate -r0 a | "$PYTHON" "$TESTTMP/substcr.py"
  0: 0a[CR]0b[CR]
  0: 0c[CR]0d[CR]
  0: 0e
  0: 0f
  0: 0g
  $ hg annotate -r1 a | "$PYTHON" "$TESTTMP/substcr.py"
  0: 0a[CR]0b[CR]
  1: 1c[CR]1d[CR]
  0: 0e
  1: 1f
  0: 0g

  $ cd ..

Annotate with linkrev pointing to another branch
------------------------------------------------

create history with a filerev whose linkrev points to another branch

  $ hg init branchedlinkrev
  $ cd branchedlinkrev
  $ echo A > a
  $ hg commit -Am 'contentA'
  adding a
  $ echo B >> a
  $ hg commit -m 'contentB'
  $ hg up --rev 'desc(contentA)'
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo unrelated > unrelated
  $ hg commit -Am 'unrelated'
  adding unrelated
  created new head
  $ hg graft -r 'desc(contentB)'
  grafting 1:fd27c222e3e6 "contentB"
  $ echo C >> a
  $ hg commit -m 'contentC'
  $ echo W >> a
  $ hg log -G
  @  changeset:   4:072f1e8df249
  |  tag:         tip
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     contentC
  |
  o  changeset:   3:ff38df03cc4b
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     contentB
  |
  o  changeset:   2:62aaf3f6fc06
  |  parent:      0:f0932f74827e
  |  user:        test
  |  date:        Thu Jan 01 00:00:00 1970 +0000
  |  summary:     unrelated
  |
  | o  changeset:   1:fd27c222e3e6
  |/   user:        test
  |    date:        Thu Jan 01 00:00:00 1970 +0000
  |    summary:     contentB
  |
  o  changeset:   0:f0932f74827e
     user:        test
     date:        Thu Jan 01 00:00:00 1970 +0000
     summary:     contentA
  

Annotate should list ancestor of starting revision only

  $ hg annotate a
  0: A
  3: B
  4: C

  $ hg annotate a -r 'wdir()'
  0 : A
  3 : B
  4 : C
  4+: W

Even when the starting revision is the linkrev-shadowed one:

  $ hg annotate a -r 3
  0: A
  3: B

  $ cd ..

Issue5360: Deleted chunk in p1 of a merge changeset

  $ hg init repo-5360
  $ cd repo-5360
  $ echo 1 > a
  $ hg commit -A a -m 1
  $ echo 2 >> a
  $ hg commit -m 2
  $ echo a > a
  $ hg commit -m a
  $ hg update '.^' -q
  $ echo 3 >> a
  $ hg commit -m 3 -q
  $ hg merge 2 -q
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  [1]
  $ cat a
  <<<<<<< working copy: 0a068f0261cf - test: 3
  1
  2
  3
  ||||||| base
  1
  2
  =======
  a
  >>>>>>> merge rev:    9409851bc20a - test: a
  $ cat > a << EOF
  > b
  > 1
  > 2
  > 3
  > a
  > EOF
  $ hg resolve --mark -q
  $ rm a.orig
  $ hg commit -m m
  $ hg annotate a
  4: b
  0: 1
  1: 2
  3: 3
  2: a

  $ cd ..