tests/test-rebase-pull.t

color: turn 'ui.color' into a boolean (auto or off)

Previously, 'ui.color=yes' meant "always show color", While
"ui.color=auto" meant "use color automatically when it appears
sensible".

This feels problematic to some people because if an administrator has
disabled color with "ui.color=off", and a user turn it back  on using
"color=on", it will get surprised (because it breaks their output when
redirected to a file.) This patch changes ui.color=true to only move the
default value of --color from "never" to "auto".

I'm not really in favor of this changes as I suspect the above case will
be pretty rare and I would rather keep the logic simpler. However, I'm
providing this patch to help the 4.2 release in the case were others
decide to make this changes.

Users that want to force colors without specifying --color on the
command line can use the 'ui.formatted' config knob, which had to be
enabled in a handful of tests for this patch.

Nice summary table (credit: Augie Fackler)

That is, before this patch:

+--------------------+--------------------+--------------------+
|                    | not a tty          | a tty              |
|                    | --color not set    | --color not set    |
|                    |                    |                    |
+--------------------+--------------------+--------------------+
| [ui]               |                    |                    |
| color (not set)    | no color           | no color           |
|                    |                    |                    |
+--------------------+--------------------+--------------------+
| [ui]               |                    |                    |
| color = auto       | no color           | color              |
|                    |                    |                    |
+--------------------+--------------------+--------------------+
| [ui]               |                    |                    |
| color = yes        | *color*            | color              |
|                    |                    |                    |
+--------------------+--------------------+--------------------+
| [ui]               |                    |                    |
| color = no         | no color           | no color           |
|                    |                    |                    |
+--------------------+--------------------+--------------------+
(if --color is specified, it always clobbers the setting in [ui])

and after this patch:

+--------------------+--------------------+--------------------+
|                    | not a tty          | a tty              |
|                    | --color not set    | --color not set    |
|                    |                    |                    |
+--------------------+--------------------+--------------------+
| [ui]               |                    |                    |
| color (not set)    | no color           | no color           |
|                    |                    |                    |
+--------------------+--------------------+--------------------+
| [ui]               |                    |                    |
| color = auto       | no color           | color              |
|                    |                    |                    |
+--------------------+--------------------+--------------------+
| [ui]               |                    |                    |
| color = yes        | *no color*         | color              |
|                    |                    |                    |
+--------------------+--------------------+--------------------+
| [ui]               |                    |                    |
| color = no         | no color           | no color           |
|                    |                    |                    |
+--------------------+--------------------+--------------------+
(if --color is specified, it always clobbers the setting in [ui])

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > rebase=
  > histedit=
  > 
  > [alias]
  > tglog = log -G --template "{rev}: '{desc}' {branches}\n"
  > EOF


  $ hg init a
  $ cd a

  $ echo C1 > C1
  $ hg ci -Am C1
  adding C1

  $ echo C2 > C2
  $ hg ci -Am C2
  adding C2

  $ cd ..

  $ hg clone a b
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg clone a c
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cd b

  $ echo L1 > L1
  $ hg ci -Am L1
  adding L1


  $ cd ../a

  $ echo R1 > R1
  $ hg ci -Am R1
  adding R1


  $ cd ../b

Now b has one revision to be pulled from a:

  $ hg pull --rebase
  pulling from $TESTTMP/a (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  rebasing 2:ff8d69a621f9 "L1"
  saved backup bundle to $TESTTMP/b/.hg/strip-backup/ff8d69a621f9-160fa373-backup.hg (glob)

  $ hg tglog
  @  3: 'L1'
  |
  o  2: 'R1'
  |
  o  1: 'C2'
  |
  o  0: 'C1'
  
Re-run:

  $ hg pull --rebase
  pulling from $TESTTMP/a (glob)
  searching for changes
  no changes found

Abort pull early if working dir is not clean:

  $ echo L1-mod > L1
  $ hg pull --rebase
  abort: uncommitted changes
  (cannot pull with rebase: please commit or shelve your changes first)
  [255]
  $ hg update --clean --quiet

Abort pull early if another operation (histedit) is in progress:

  $ hg histedit . -q --commands - << EOF
  > edit d80cc2da061e histedit: generate unfinished state
  > EOF
  Editing (d80cc2da061e), you may commit or record as needed now.
  (hg histedit --continue to resume)
  [1]
  $ hg pull --rebase
  abort: histedit in progress
  (use 'hg histedit --continue' or 'hg histedit --abort')
  [255]
  $ hg histedit --abort --quiet

Abort pull early with pending uncommitted merge:

  $ cd ..
  $ hg clone --noupdate c d
  $ cd d
  $ hg tglog
  o  1: 'C2'
  |
  o  0: 'C1'
  
  $ hg update --quiet 0
  $ echo M1 > M1
  $ hg commit --quiet -Am M1
  $ hg update --quiet 1
  $ hg merge 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg pull --rebase
  abort: outstanding uncommitted merge
  (cannot pull with rebase: please commit or shelve your changes first)
  [255]
  $ hg update --clean --quiet

Abort pull early with unclean subrepo:
  $ echo s = s > .hgsub
  $ hg add .hgsub
  $ hg init s
  $ hg commit -m "generated a subrepo"
  $ echo a > s/a
  $ hg -R s add s/a
  $ hg pull --rebase
  abort: uncommitted changes in subrepository 's'
  (cannot pull with rebase: please commit or shelve your changes first)
  [255]

Invoke pull --rebase and nothing to rebase:

  $ cd ../c

  $ hg book norebase
  $ hg pull --rebase
  pulling from $TESTTMP/a (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  nothing to rebase - updating instead
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updating bookmark norebase

  $ hg tglog -l 1
  @  2: 'R1'
  |
  ~

pull --rebase --update should ignore --update:

  $ hg pull --rebase --update
  pulling from $TESTTMP/a (glob)
  searching for changes
  no changes found

pull --rebase doesn't update if nothing has been pulled:

  $ hg up -q 1

  $ hg pull --rebase
  pulling from $TESTTMP/a (glob)
  searching for changes
  no changes found

  $ hg tglog -l 1
  o  2: 'R1'
  |
  ~

  $ cd ..

pull --rebase works when a specific revision is pulled (issue3619)

  $ cd a
  $ hg tglog
  @  2: 'R1'
  |
  o  1: 'C2'
  |
  o  0: 'C1'
  
  $ echo R2 > R2
  $ hg ci -Am R2
  adding R2
  $ echo R3 > R3
  $ hg ci -Am R3
  adding R3
  $ cd ../c
  $ hg tglog
  o  2: 'R1'
  |
  @  1: 'C2'
  |
  o  0: 'C1'
  
  $ echo L1 > L1
  $ hg ci -Am L1
  adding L1
  created new head
  $ hg pull --rev tip --rebase
  pulling from $TESTTMP/a (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  rebasing 3:ff8d69a621f9 "L1"
  saved backup bundle to $TESTTMP/c/.hg/strip-backup/ff8d69a621f9-160fa373-backup.hg (glob)
  $ hg tglog
  @  5: 'L1'
  |
  o  4: 'R3'
  |
  o  3: 'R2'
  |
  o  2: 'R1'
  |
  o  1: 'C2'
  |
  o  0: 'C1'
  
pull --rebase works with bundle2 turned on

  $ cd ../a
  $ echo R4 > R4
  $ hg ci -Am R4
  adding R4
  $ hg tglog
  @  5: 'R4'
  |
  o  4: 'R3'
  |
  o  3: 'R2'
  |
  o  2: 'R1'
  |
  o  1: 'C2'
  |
  o  0: 'C1'
  
  $ cd ../c
  $ hg pull --rebase
  pulling from $TESTTMP/a (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  rebasing 5:518d153c0ba3 "L1"
  saved backup bundle to $TESTTMP/c/.hg/strip-backup/518d153c0ba3-73407f14-backup.hg (glob)
  $ hg tglog
  @  6: 'L1'
  |
  o  5: 'R4'
  |
  o  4: 'R3'
  |
  o  3: 'R2'
  |
  o  2: 'R1'
  |
  o  1: 'C2'
  |
  o  0: 'C1'
  

pull --rebase only update if there is nothing to rebase

  $ cd ../a
  $ echo R5 > R5
  $ hg ci -Am R5
  adding R5
  $ hg tglog
  @  6: 'R5'
  |
  o  5: 'R4'
  |
  o  4: 'R3'
  |
  o  3: 'R2'
  |
  o  2: 'R1'
  |
  o  1: 'C2'
  |
  o  0: 'C1'
  
  $ cd ../c
  $ echo L2 > L2
  $ hg ci -Am L2
  adding L2
  $ hg up 'desc(L1)'
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg pull --rebase
  pulling from $TESTTMP/a (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  rebasing 6:0d0727eb7ce0 "L1"
  rebasing 7:c1f58876e3bf "L2"
  saved backup bundle to $TESTTMP/c/.hg/strip-backup/0d0727eb7ce0-ef61ccb2-backup.hg (glob)
  $ hg tglog
  o  8: 'L2'
  |
  @  7: 'L1'
  |
  o  6: 'R5'
  |
  o  5: 'R4'
  |
  o  4: 'R3'
  |
  o  3: 'R2'
  |
  o  2: 'R1'
  |
  o  1: 'C2'
  |
  o  0: 'C1'
  

pull --rebase update (no rebase) use proper update:

- warn about other head.

  $ cd ../a
  $ echo R6 > R6
  $ hg ci -Am R6
  adding R6
  $ cd ../c
  $ hg up 'desc(R5)'
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg pull --rebase
  pulling from $TESTTMP/a (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  nothing to rebase - updating instead
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  1 other heads for branch "default"
  $ hg tglog
  @  9: 'R6'
  |
  | o  8: 'L2'
  | |
  | o  7: 'L1'
  |/
  o  6: 'R5'
  |
  o  5: 'R4'
  |
  o  4: 'R3'
  |
  o  3: 'R2'
  |
  o  2: 'R1'
  |
  o  1: 'C2'
  |
  o  0: 'C1'
  

Multiple pre-existing heads on the branch
-----------------------------------------

Pull bring content, but nothing on the current branch, we should not consider
pre-existing heads.

  $ cd ../a
  $ hg branch unrelatedbranch
  marked working directory as branch unrelatedbranch
  (branches are permanent and global, did you want a bookmark?)
  $ echo B1 > B1
  $ hg commit -Am B1
  adding B1
  $ cd ../c
  $ hg up 'desc(L2)'
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg pull --rebase
  pulling from $TESTTMP/a (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  nothing to rebase

There is two local heads and we pull a third one.
The second local head should not confuse the `hg pull rebase`.

  $ hg up 'desc(R6)'
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ echo M1 > M1
  $ hg commit -Am M1
  adding M1
  $ cd ../a
  $ hg up 'desc(R6)'
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo R7 > R7
  $ hg commit -Am R7
  adding R7
  $ cd ../c
  $ hg up 'desc(L2)'
  2 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ hg pull --rebase
  pulling from $TESTTMP/a (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  rebasing 7:864e0a2d2614 "L1"
  rebasing 8:6dc0ea5dcf55 "L2"
  saved backup bundle to $TESTTMP/c/.hg/strip-backup/864e0a2d2614-2f72c89c-backup.hg (glob)
  $ hg tglog
  @  12: 'L2'
  |
  o  11: 'L1'
  |
  o  10: 'R7'
  |
  | o  9: 'M1'
  |/
  | o  8: 'B1' unrelatedbranch
  |/
  o  7: 'R6'
  |
  o  6: 'R5'
  |
  o  5: 'R4'
  |
  o  4: 'R3'
  |
  o  3: 'R2'
  |
  o  2: 'R1'
  |
  o  1: 'C2'
  |
  o  0: 'C1'