annotate tests/test-https.t @ 24787:9d5c27890790

largefiles: for update -C, only update largefiles when necessary

Before, a --clean update with largefiles would use the "optimization" that it
didn't read hashes from standin files before and after the update. Instead of
trusting the content of the standin files, it would rehash all the actual
largefiles that lfdirstate reported clean and update the standins that didn't
have the expected content. It could thus in some "impossible" situations
automatically recover from some "largefile got out sync with its standin"
issues (even there apparently still were weird corner cases where it could
fail). This extra checking is similar to what core --clean intentionally do
not do, and it made update --clean unbearable slow.

Usually in core Mercurial, --clean will rely on the dirstate to find the files
it should update. (It is thus intentionally possible (when trying to trick the
system or if there should be bugs) to end up in situations where --clean not
will restore the working directory content correctly.) Checking every file when
we "know" it is ok is however not an option - that would be too slow.

Instead, trust the content of the standin files. Use the same logic for --clean
as for linear updates and trust the dirstate and that our "logic" will keep
them in sync. It is much cheaper to just rehash the largefiles reported dirty
by a status walk and read all standins than to hash largefiles.

Most of the changes are just a change of indentation now when the different
kinds of updates no longer are handled that differently. Standins for added
files are however only written when doing a normal update, while deleted and
removed files only will be updated for --clean updates.

#require serve ssl

Proper https client requires the built-in ssl from Python 2.6.

Certificates created with:
 printf '.\n.\n.\n.\n.\nlocalhost\nhg@localhost\n' | \
 openssl req -newkey rsa:512 -keyout priv.pem -nodes -x509 -days 9000 -out pub.pem
Can be dumped with:
 openssl x509 -in pub.pem -text

  $ cat << EOT > priv.pem
  > -----BEGIN PRIVATE KEY-----
  > MIIBVAIBADANBgkqhkiG9w0BAQEFAASCAT4wggE6AgEAAkEApjCWeYGrIa/Vo7LH
  > aRF8ou0tbgHKE33Use/whCnKEUm34rDaXQd4lxxX6aDWg06n9tiVStAKTgQAHJY8
  > j/xgSwIDAQABAkBxHC6+Qlf0VJXGlb6NL16yEVVTQxqDS6hA9zqu6TZjrr0YMfzc
  > EGNIiZGt7HCBL0zO+cPDg/LeCZc6HQhf0KrhAiEAzlJq4hWWzvguWFIJWSoBeBUG
  > MF1ACazQO7PYE8M0qfECIQDONHHP0SKZzz/ZwBZcAveC5K61f/v9hONFwbeYulzR
  > +wIgc9SvbtgB/5Yzpp//4ZAEnR7oh5SClCvyB+KSx52K3nECICbhQphhoXmI10wy
  > aMTellaq0bpNMHFDziqH9RsqAHhjAiEAgYGxfzkftt5IUUn/iFK89aaIpyrpuaAh
  > HY8gUVkVRVs=
  > -----END PRIVATE KEY-----
  > EOT

  $ cat << EOT > pub.pem
  > -----BEGIN CERTIFICATE-----
  > MIIBqzCCAVWgAwIBAgIJANAXFFyWjGnRMA0GCSqGSIb3DQEBBQUAMDExEjAQBgNV
  > BAMMCWxvY2FsaG9zdDEbMBkGCSqGSIb3DQEJARYMaGdAbG9jYWxob3N0MB4XDTEw
  > MTAxNDIwMzAxNFoXDTM1MDYwNTIwMzAxNFowMTESMBAGA1UEAwwJbG9jYWxob3N0
  > MRswGQYJKoZIhvcNAQkBFgxoZ0Bsb2NhbGhvc3QwXDANBgkqhkiG9w0BAQEFAANL
  > ADBIAkEApjCWeYGrIa/Vo7LHaRF8ou0tbgHKE33Use/whCnKEUm34rDaXQd4lxxX
  > 6aDWg06n9tiVStAKTgQAHJY8j/xgSwIDAQABo1AwTjAdBgNVHQ4EFgQUE6sA+amm
  > r24dGX0kpjxOgO45hzQwHwYDVR0jBBgwFoAUE6sA+ammr24dGX0kpjxOgO45hzQw
  > DAYDVR0TBAUwAwEB/zANBgkqhkiG9w0BAQUFAANBAFArvQFiAZJgQczRsbYlG1xl
  > t+truk37w5B3m3Ick1ntRcQrqs+hf0CO1q6Squ144geYaQ8CDirSR92fICELI1c=
  > -----END CERTIFICATE-----
  > EOT
  $ cat priv.pem pub.pem >> server.pem
  $ PRIV=`pwd`/server.pem

  $ cat << EOT > pub-other.pem
  > -----BEGIN CERTIFICATE-----
  > MIIBqzCCAVWgAwIBAgIJALwZS731c/ORMA0GCSqGSIb3DQEBBQUAMDExEjAQBgNV
  > BAMMCWxvY2FsaG9zdDEbMBkGCSqGSIb3DQEJARYMaGdAbG9jYWxob3N0MB4XDTEw
  > MTAxNDIwNDUxNloXDTM1MDYwNTIwNDUxNlowMTESMBAGA1UEAwwJbG9jYWxob3N0
  > MRswGQYJKoZIhvcNAQkBFgxoZ0Bsb2NhbGhvc3QwXDANBgkqhkiG9w0BAQEFAANL
  > ADBIAkEAsxsapLbHrqqUKuQBxdpK4G3m2LjtyrTSdpzzzFlecxd5yhNP6AyWrufo
  > K4VMGo2xlu9xOo88nDSUNSKPuD09MwIDAQABo1AwTjAdBgNVHQ4EFgQUoIB1iMhN
  > y868rpQ2qk9dHnU6ebswHwYDVR0jBBgwFoAUoIB1iMhNy868rpQ2qk9dHnU6ebsw
  > DAYDVR0TBAUwAwEB/zANBgkqhkiG9w0BAQUFAANBAJ544f125CsE7J2t55PdFaF6
  > bBlNBb91FCywBgSjhBjf+GG3TNPwrPdc3yqeq+hzJiuInqbOBv9abmMyq8Wsoig=
  > -----END CERTIFICATE-----
  > EOT

pub.pem patched with other notBefore / notAfter:

  $ cat << EOT > pub-not-yet.pem
  > -----BEGIN CERTIFICATE-----
  > MIIBqzCCAVWgAwIBAgIJANAXFFyWjGnRMA0GCSqGSIb3DQEBBQUAMDExEjAQBgNVBAMMCWxvY2Fs
  > aG9zdDEbMBkGCSqGSIb3DQEJARYMaGdAbG9jYWxob3N0MB4XDTM1MDYwNTIwMzAxNFoXDTM1MDYw
  > NTIwMzAxNFowMTESMBAGA1UEAwwJbG9jYWxob3N0MRswGQYJKoZIhvcNAQkBFgxoZ0Bsb2NhbGhv
  > c3QwXDANBgkqhkiG9w0BAQEFAANLADBIAkEApjCWeYGrIa/Vo7LHaRF8ou0tbgHKE33Use/whCnK
  > EUm34rDaXQd4lxxX6aDWg06n9tiVStAKTgQAHJY8j/xgSwIDAQABo1AwTjAdBgNVHQ4EFgQUE6sA
  > +ammr24dGX0kpjxOgO45hzQwHwYDVR0jBBgwFoAUE6sA+ammr24dGX0kpjxOgO45hzQwDAYDVR0T
  > BAUwAwEB/zANBgkqhkiG9w0BAQUFAANBAJXV41gWnkgC7jcpPpFRSUSZaxyzrXmD1CIqQf0WgVDb
  > /12E0vR2DuZitgzUYtBaofM81aTtc0a2/YsrmqePGm0=
  > -----END CERTIFICATE-----
  > EOT
  $ cat priv.pem pub-not-yet.pem > server-not-yet.pem

  $ cat << EOT > pub-expired.pem
  > -----BEGIN CERTIFICATE-----
  > MIIBqzCCAVWgAwIBAgIJANAXFFyWjGnRMA0GCSqGSIb3DQEBBQUAMDExEjAQBgNVBAMMCWxvY2Fs
  > aG9zdDEbMBkGCSqGSIb3DQEJARYMaGdAbG9jYWxob3N0MB4XDTEwMTAxNDIwMzAxNFoXDTEwMTAx
  > NDIwMzAxNFowMTESMBAGA1UEAwwJbG9jYWxob3N0MRswGQYJKoZIhvcNAQkBFgxoZ0Bsb2NhbGhv
  > c3QwXDANBgkqhkiG9w0BAQEFAANLADBIAkEApjCWeYGrIa/Vo7LHaRF8ou0tbgHKE33Use/whCnK
  > EUm34rDaXQd4lxxX6aDWg06n9tiVStAKTgQAHJY8j/xgSwIDAQABo1AwTjAdBgNVHQ4EFgQUE6sA
  > +ammr24dGX0kpjxOgO45hzQwHwYDVR0jBBgwFoAUE6sA+ammr24dGX0kpjxOgO45hzQwDAYDVR0T
  > BAUwAwEB/zANBgkqhkiG9w0BAQUFAANBAJfk57DTRf2nUbYaMSlVAARxMNbFGOjQhAUtY400GhKt
  > 2uiKCNGKXVXD3AHWe13yHc5KttzbHQStE5Nm/DlWBWQ=
  > -----END CERTIFICATE-----
  > EOT
  $ cat priv.pem pub-expired.pem > server-expired.pem

  $ hg init test
  $ cd test
  $ echo foo>foo
  $ mkdir foo.d foo.d/bAr.hg.d foo.d/baR.d.hg
  $ echo foo>foo.d/foo
  $ echo bar>foo.d/bAr.hg.d/BaR
  $ echo bar>foo.d/baR.d.hg/bAR
  $ hg commit -A -m 1
  adding foo
  adding foo.d/bAr.hg.d/BaR
  adding foo.d/baR.d.hg/bAR
  adding foo.d/foo
  $ hg serve -p $HGPORT -d --pid-file=../hg0.pid --certificate=$PRIV
  $ cat ../hg0.pid >> $DAEMON_PIDS

cacert not found

  $ hg in --config web.cacerts=no-such.pem https://localhost:$HGPORT/
  abort: could not find web.cacerts: no-such.pem
  [255]

Test server address cannot be reused

#if windows
  $ hg serve -p $HGPORT --certificate=$PRIV 2>&1
  abort: cannot start server at ':$HGPORT':
  [255]
#else
  $ hg serve -p $HGPORT --certificate=$PRIV 2>&1
  abort: cannot start server at ':$HGPORT': Address already in use
  [255]
#endif
  $ cd ..

OS X has a dummy CA cert that enables use of the system CA store when using
Apple's OpenSSL. This trick do not work with plain OpenSSL.

  $ DISABLEOSXDUMMYCERT=
#if defaultcacerts
  $ hg clone https://localhost:$HGPORT/ copy-pull
  abort: error: *certificate verify failed* (glob)
  [255]

  $ DISABLEOSXDUMMYCERT="--config=web.cacerts=!"
#endif

clone via pull

  $ hg clone https://localhost:$HGPORT/ copy-pull $DISABLEOSXDUMMYCERT
  warning: localhost certificate with fingerprint 91:4f:1a:ff:87:24:9c:09:b6:85:9b:88:b1:90:6d:30:75:64:91:ca not verified (check hostfingerprints or web.cacerts config setting)
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 4 changes to 4 files
  updating to branch default
  4 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg verify -R copy-pull
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  4 files, 1 changesets, 4 total revisions
  $ cd test
  $ echo bar > bar
  $ hg commit -A -d '1 0' -m 2
  adding bar
  $ cd ..

pull without cacert

  $ cd copy-pull
  $ echo '[hooks]' >> .hg/hgrc
  $ echo "changegroup = python \"$TESTDIR/printenv.py\" changegroup" >> .hg/hgrc
  $ hg pull $DISABLEOSXDUMMYCERT
  pulling from https://localhost:$HGPORT/
  warning: localhost certificate with fingerprint 91:4f:1a:ff:87:24:9c:09:b6:85:9b:88:b1:90:6d:30:75:64:91:ca not verified (check hostfingerprints or web.cacerts config setting)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  changegroup hook: HG_NODE=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_SOURCE=pull HG_TXNID=TXN:* HG_URL=https://localhost:$HGPORT/ (glob)
  (run 'hg update' to get a working copy)
  $ cd ..

cacert configured in local repo

  $ cp copy-pull/.hg/hgrc copy-pull/.hg/hgrc.bu
  $ echo "[web]" >> copy-pull/.hg/hgrc
  $ echo "cacerts=`pwd`/pub.pem" >> copy-pull/.hg/hgrc
  $ hg -R copy-pull pull --traceback
  pulling from https://localhost:$HGPORT/
  searching for changes
  no changes found
  $ mv copy-pull/.hg/hgrc.bu copy-pull/.hg/hgrc

cacert configured globally, also testing expansion of environment
variables in the filename

  $ echo "[web]" >> $HGRCPATH
  $ echo 'cacerts=$P/pub.pem' >> $HGRCPATH
  $ P=`pwd` hg -R copy-pull pull
  pulling from https://localhost:$HGPORT/
  searching for changes
  no changes found
  $ P=`pwd` hg -R copy-pull pull --insecure
  pulling from https://localhost:$HGPORT/
  warning: localhost certificate with fingerprint 91:4f:1a:ff:87:24:9c:09:b6:85:9b:88:b1:90:6d:30:75:64:91:ca not verified (check hostfingerprints or web.cacerts config setting)
  searching for changes
  no changes found

cacert mismatch

  $ hg -R copy-pull pull --config web.cacerts=pub.pem https://127.0.0.1:$HGPORT/
  pulling from https://127.0.0.1:$HGPORT/
  abort: 127.0.0.1 certificate error: certificate is for localhost
  (configure hostfingerprint 91:4f:1a:ff:87:24:9c:09:b6:85:9b:88:b1:90:6d:30:75:64:91:ca or use --insecure to connect insecurely)
  [255]
  $ hg -R copy-pull pull --config web.cacerts=pub.pem https://127.0.0.1:$HGPORT/ --insecure
  pulling from https://127.0.0.1:$HGPORT/
  warning: 127.0.0.1 certificate with fingerprint 91:4f:1a:ff:87:24:9c:09:b6:85:9b:88:b1:90:6d:30:75:64:91:ca not verified (check hostfingerprints or web.cacerts config setting)
  searching for changes
  no changes found
  $ hg -R copy-pull pull --config web.cacerts=pub-other.pem
  pulling from https://localhost:$HGPORT/
  abort: error: *certificate verify failed* (glob)
  [255]
  $ hg -R copy-pull pull --config web.cacerts=pub-other.pem --insecure
  pulling from https://localhost:$HGPORT/
  warning: localhost certificate with fingerprint 91:4f:1a:ff:87:24:9c:09:b6:85:9b:88:b1:90:6d:30:75:64:91:ca not verified (check hostfingerprints or web.cacerts config setting)
  searching for changes
  no changes found

Test server cert which isn't valid yet

  $ hg -R test serve -p $HGPORT1 -d --pid-file=hg1.pid --certificate=server-not-yet.pem
  $ cat hg1.pid >> $DAEMON_PIDS
  $ hg -R copy-pull pull --config web.cacerts=pub-not-yet.pem https://localhost:$HGPORT1/
  pulling from https://localhost:$HGPORT1/
  abort: error: *certificate verify failed* (glob)
  [255]

Test server cert which no longer is valid

  $ hg -R test serve -p $HGPORT2 -d --pid-file=hg2.pid --certificate=server-expired.pem
  $ cat hg2.pid >> $DAEMON_PIDS
  $ hg -R copy-pull pull --config web.cacerts=pub-expired.pem https://localhost:$HGPORT2/
  pulling from https://localhost:$HGPORT2/
  abort: error: *certificate verify failed* (glob)
  [255]

Fingerprints

  $ echo "[hostfingerprints]" >> copy-pull/.hg/hgrc
  $ echo "localhost = 91:4f:1a:ff:87:24:9c:09:b6:85:9b:88:b1:90:6d:30:75:64:91:ca" >> copy-pull/.hg/hgrc
  $ echo "127.0.0.1 = 914f1aff87249c09b6859b88b1906d30756491ca" >> copy-pull/.hg/hgrc

- works without cacerts
  $ hg -R copy-pull id https://localhost:$HGPORT/ --config web.cacerts=!
  5fed3813f7f5

- fails when cert doesn't match hostname (port is ignored)
  $ hg -R copy-pull id https://localhost:$HGPORT1/
  abort: certificate for localhost has unexpected fingerprint 28:ff:71:bf:65:31:14:23:ad:62:92:b4:0e:31:99:18:fc:83:e3:9b
  (check hostfingerprint configuration)
  [255]


- ignores that certificate doesn't match hostname
  $ hg -R copy-pull id https://127.0.0.1:$HGPORT/
  5fed3813f7f5

HGPORT1 is reused below for tinyproxy tests. Kill that server.
  $ "$TESTDIR/killdaemons.py" hg1.pid

Prepare for connecting through proxy

  $ "$TESTDIR/tinyproxy.py" $HGPORT1 localhost >proxy.log </dev/null 2>&1 &
  $ while [ ! -f proxy.pid ]; do sleep 0; done
  $ cat proxy.pid >> $DAEMON_PIDS

  $ echo "[http_proxy]" >> copy-pull/.hg/hgrc
  $ echo "always=True" >> copy-pull/.hg/hgrc
  $ echo "[hostfingerprints]" >> copy-pull/.hg/hgrc
  $ echo "localhost =" >> copy-pull/.hg/hgrc

Test unvalidated https through proxy

  $ http_proxy=http://localhost:$HGPORT1/ hg -R copy-pull pull --insecure --traceback
  pulling from https://localhost:$HGPORT/
  warning: localhost certificate with fingerprint 91:4f:1a:ff:87:24:9c:09:b6:85:9b:88:b1:90:6d:30:75:64:91:ca not verified (check hostfingerprints or web.cacerts config setting)
  searching for changes
  no changes found

Test https with cacert and fingerprint through proxy

  $ http_proxy=http://localhost:$HGPORT1/ hg -R copy-pull pull --config web.cacerts=pub.pem
  pulling from https://localhost:$HGPORT/
  searching for changes
  no changes found
  $ http_proxy=http://localhost:$HGPORT1/ hg -R copy-pull pull https://127.0.0.1:$HGPORT/
  pulling from https://127.0.0.1:$HGPORT/
  searching for changes
  no changes found

Test https with cert problems through proxy

  $ http_proxy=http://localhost:$HGPORT1/ hg -R copy-pull pull --config web.cacerts=pub-other.pem
  pulling from https://localhost:$HGPORT/
  abort: error: *certificate verify failed* (glob)
  [255]
  $ http_proxy=http://localhost:$HGPORT1/ hg -R copy-pull pull --config web.cacerts=pub-expired.pem https://localhost:$HGPORT2/
  pulling from https://localhost:$HGPORT2/
  abort: error: *certificate verify failed* (glob)
  [255]