annotate tests/test-mq-qpush-fail.t @ 24787:9d5c27890790

largefiles: for update -C, only update largefiles when necessary

Before, a --clean update with largefiles would use the "optimization" that it
didn't read hashes from standin files before and after the update. Instead of
trusting the content of the standin files, it would rehash all the actual
largefiles that lfdirstate reported clean and update the standins that didn't
have the expected content. It could thus in some "impossible" situations
automatically recover from some "largefile got out sync with its standin"
issues (even there apparently still were weird corner cases where it could
fail). This extra checking is similar to what core --clean intentionally do
not do, and it made update --clean unbearable slow.

Usually in core Mercurial, --clean will rely on the dirstate to find the files
it should update. (It is thus intentionally possible (when trying to trick the
system or if there should be bugs) to end up in situations where --clean not
will restore the working directory content correctly.) Checking every file when
we "know" it is ok is however not an option - that would be too slow.

Instead, trust the content of the standin files. Use the same logic for --clean
as for linear updates and trust the dirstate and that our "logic" will keep
them in sync. It is much cheaper to just rehash the largefiles reported dirty
by a status walk and read all standins than to hash largefiles.

Most of the changes are just a change of indentation now when the different
kinds of updates no longer are handled that differently. Standins for added
files are however only written when doing a normal update, while deleted and
removed files only will be updated for --clean updates.

Test that qpush cleans things up if it doesn't complete

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mq=" >> $HGRCPATH
  $ hg init repo
  $ cd repo
  $ echo foo > foo
  $ hg ci -Am 'add foo'
  adding foo
  $ touch untracked-file
  $ echo 'syntax: glob' > .hgignore
  $ echo '.hgignore' >> .hgignore
  $ hg qinit

test qpush on empty series

  $ hg qpush
  no patches in series
  $ hg qnew patch1
  $ echo >> foo
  $ hg qrefresh -m 'patch 1'
  $ hg qnew patch2
  $ echo bar > bar
  $ hg add bar
  $ hg qrefresh -m 'patch 2'
  $ hg qnew --config 'mq.plain=true' -U bad-patch
  $ echo >> foo
  $ hg qrefresh
  $ hg qpop -a
  popping bad-patch
  popping patch2
  popping patch1
  patch queue now empty
  $ $PYTHON -c 'print "\xe9"' > message
  $ cat .hg/patches/bad-patch >> message
  $ mv message .hg/patches/bad-patch
  $ hg qpush -a && echo 'qpush succeeded?!'
  applying patch1
  applying patch2
  applying bad-patch
  transaction abort!
  rollback completed
  cleaning up working directory...done
  abort: decoding near '\xe9': 'ascii' codec can't decode byte 0xe9 in position 0: ordinal not in range(128)! (esc)
  [255]
  $ hg parents
  changeset:   0:bbd179dfa0a7
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     add foo
  

test corrupt status file
  $ hg qpush
  applying patch1
  now at: patch1
  $ cp .hg/patches/status .hg/patches/status.orig
  $ hg qpop
  popping patch1
  patch queue now empty
  $ cp .hg/patches/status.orig .hg/patches/status
  $ hg qpush
  abort: working directory revision is not qtip
  [255]
  $ rm .hg/patches/status .hg/patches/status.orig


bar should be gone; other unknown/ignored files should still be around

  $ hg status -A
  ? untracked-file
  I .hgignore
  C foo

preparing qpush of a missing patch

  $ hg qpop -a
  no patches applied
  $ hg qpush
  applying patch1
  now at: patch1
  $ rm .hg/patches/patch2

now we expect the push to fail, but it should NOT complain about patch1

  $ hg qpush
  applying patch2
  unable to read patch2
  now at: patch1
  [1]

preparing qpush of missing patch with no patch applied

  $ hg qpop -a
  popping patch1
  patch queue now empty
  $ rm .hg/patches/patch1

qpush should fail the same way as below

  $ hg qpush
  applying patch1
  unable to read patch1
  [1]

Test qpush to a patch below the currently applied patch.

  $ hg qq -c guardedseriesorder
  $ hg qnew a
  $ hg qguard +block
  $ hg qnew b
  $ hg qnew c

  $ hg qpop -a
  popping c
  popping b
  popping a
  patch queue now empty

try to push and pop while a is guarded

  $ hg qpush a
  cannot push 'a' - guarded by '+block'
  [1]
  $ hg qpush -a
  applying b
  patch b is empty
  applying c
  patch c is empty
  now at: c

now try it when a is unguarded, and we're at the top of the queue

  $ hg qapplied -v
  0 G a
  1 A b
  2 A c
  $ hg qsel block
  $ hg qpush b
  abort: cannot push to a previous patch: b
  [255]
  $ hg qpush a
  abort: cannot push to a previous patch: a
  [255]

and now we try it one more time with a unguarded, while we're not at the top of the queue

  $ hg qpop b
  popping c
  now at: b
  $ hg qpush a
  abort: cannot push to a previous patch: a
  [255]

test qpop --force and backup files

  $ hg qpop -a
  popping b
  patch queue now empty
  $ hg qq --create force
  $ echo a > a
  $ echo b > b
  $ echo c > c
  $ hg ci -Am add a b c
  $ echo a >> a
  $ hg rm b
  $ hg rm c
  $ hg qnew p1
  $ echo a >> a
  $ echo bb > b
  $ hg add b
  $ echo cc > c
  $ hg add c
  $ hg qpop --force --verbose
  saving current version of a as a.orig
  saving current version of b as b.orig
  saving current version of c as c.orig
  popping p1
  patch queue now empty
  $ hg st
  ? a.orig
  ? b.orig
  ? c.orig
  ? untracked-file
  $ cat a.orig
  a
  a
  a
  $ cat b.orig
  bb
  $ cat c.orig
  cc

test qpop --force --no-backup

  $ hg qpush
  applying p1
  now at: p1
  $ rm a.orig
  $ echo a >> a
  $ hg qpop --force --no-backup --verbose
  popping p1
  patch queue now empty
  $ test -f a.orig && echo 'error: backup with --no-backup'
  [1]

test qpop --keep-changes

  $ hg qpush
  applying p1
  now at: p1
  $ hg qpop --keep-changes --force
  abort: cannot use both --force and --keep-changes
  [255]
  $ echo a >> a
  $ hg qpop --keep-changes
  abort: local changes found, refresh first
  [255]
  $ hg revert -qa a
  $ rm a
  $ hg qpop --keep-changes
  abort: local changes found, refresh first
  [255]
  $ hg rm -A a
  $ hg qpop --keep-changes
  abort: local changes found, refresh first
  [255]
  $ hg revert -qa a
  $ echo b > b
  $ hg add b
  $ hg qpop --keep-changes
  abort: local changes found, refresh first
  [255]
  $ hg forget b
  $ echo d > d
  $ hg add d
  $ hg qpop --keep-changes
  popping p1
  patch queue now empty
  $ hg forget d
  $ rm d

test qpush --force and backup files

  $ echo a >> a
  $ hg qnew p2
  $ echo b >> b
  $ echo d > d
  $ echo e > e
  $ hg add d e
  $ hg rm c
  $ hg qnew p3
  $ hg qpop -a
  popping p3
  popping p2
  patch queue now empty
  $ echo a >> a
  $ echo b1 >> b
  $ echo d1 > d
  $ hg add d
  $ echo e1 > e
  $ hg qpush -a --force --verbose
  applying p2
  saving current version of a as a.orig
  patching file a
  committing files:
  a
  committing manifest
  committing changelog
  applying p3
  saving current version of b as b.orig
  saving current version of d as d.orig
  patching file b
  patching file c
  patching file d
  file d already exists
  1 out of 1 hunks FAILED -- saving rejects to file d.rej
  patching file e
  file e already exists
  1 out of 1 hunks FAILED -- saving rejects to file e.rej
  patch failed to apply
  committing files:
  b
  committing manifest
  committing changelog
  patch failed, rejects left in working directory
  errors during apply, please fix and refresh p3
  [2]
  $ cat a.orig
  a
  a
  $ cat b.orig
  b
  b1
  $ cat d.orig
  d1

test qpush --force --no-backup

  $ hg revert -qa
  $ hg qpop -a
  popping p3
  popping p2
  patch queue now empty
  $ echo a >> a
  $ rm a.orig
  $ hg qpush --force --no-backup --verbose
  applying p2
  patching file a
  committing files:
  a
  committing manifest
  committing changelog
  now at: p2
  $ test -f a.orig && echo 'error: backup with --no-backup'
  [1]

test qgoto --force --no-backup

  $ hg qpop
  popping p2
  patch queue now empty
  $ echo a >> a
  $ hg qgoto --force --no-backup p2 --verbose
  applying p2
  patching file a
  committing files:
  a
  committing manifest
  committing changelog
  now at: p2
  $ test -f a.orig && echo 'error: backup with --no-backup'
  [1]

test qpush --keep-changes

  $ hg qpush --keep-changes --force
  abort: cannot use both --force and --keep-changes
  [255]
  $ hg qpush --keep-changes --exact
  abort: cannot use --exact and --keep-changes together
  [255]
  $ echo b >> b
  $ hg qpush --keep-changes
  applying p3
  errors during apply, please fix and refresh p2
  [2]
  $ rm b
  $ hg qpush --keep-changes
  applying p3
  errors during apply, please fix and refresh p2
  [2]
  $ hg rm -A b
  $ hg qpush --keep-changes
  applying p3
  errors during apply, please fix and refresh p2
  [2]
  $ hg revert -aq b
  $ echo d > d
  $ hg add d
  $ hg qpush --keep-changes
  applying p3
  errors during apply, please fix and refresh p2
  [2]
  $ hg forget d
  $ rm d
  $ hg qpop
  popping p2
  patch queue now empty
  $ echo b >> b
  $ hg qpush -a --keep-changes
  applying p2
  applying p3
  errors during apply, please fix and refresh p2
  [2]
  $ hg qtop
  p2
  $ hg parents --template "{rev} {desc}\n"
  2 imported patch p2
  $ hg st b
  M b
  $ cat b
  b
  b

test qgoto --keep-changes

  $ hg revert -aq b
  $ rm e
  $ hg qgoto --keep-changes --force p3
  abort: cannot use both --force and --keep-changes
  [255]
  $ echo a >> a
  $ hg qgoto --keep-changes p3
  applying p3
  now at: p3
  $ hg st a
  M a
  $ hg qgoto --keep-changes p2
  popping p3
  now at: p2
  $ hg st a
  M a

test mq.keepchanges setting

  $ hg --config mq.keepchanges=1 qpush
  applying p3
  now at: p3
  $ hg st a
  M a
  $ hg --config mq.keepchanges=1 qpop
  popping p3
  now at: p2
  $ hg st a
  M a
  $ hg --config mq.keepchanges=1 qgoto p3
  applying p3
  now at: p3
  $ hg st a
  M a
  $ echo b >> b
  $ hg --config mq.keepchanges=1 qpop --force
  popping p3
  now at: p2
  $ hg st b
  $ hg --config mq.keepchanges=1 qpush --exact
  abort: local changes found, refresh first
  [255]
  $ hg revert -qa a
  $ hg qpop
  popping p2
  patch queue now empty
  $ echo a >> a
  $ hg --config mq.keepchanges=1 qpush --force
  applying p2
  now at: p2
  $ hg st a

  $ cd ..