mercurial/filemerge.py

sparse-read: move from a recursive-based approach to a heap-based one

The previous recursive approach was trying to optimise each read slice to have
a good density. It had the tendency to over-optimize smaller slices while
leaving larger hole in others.

The new approach focuses on improving the combined density of all the reads,
instead of the individual slices. It slices at the largest gaps first, as they
reduce the total amount of read data the most efficiently.

Another benefit of this approach is that we iterate over the delta chain only
once, reducing the overhead of slicing long delta chains.

On the repository we use for tests, the new approach shows similar or faster
performance than the current default linear full read.

The repository contains about 450,000 revisions with many concurrent
topological branches. Tests have been run on two versions of the repository:
one built with the current delta constraint, and the other with an unlimited
delta span (using 'experimental.maxdeltachainspan=0')

Below are timings for building 1% of all the revision in the manifest log using
'hg perfrevlogrevisions -m'. Times are given in seconds. They include the new
couple of follow-up changeset in this series.

delta-span  standard    unlimited
linear-read     922s         632s
sparse-read     814s         566s

# filemerge.py - file-level merge handling for Mercurial
#
# Copyright 2006, 2007, 2008 Matt Mackall <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from __future__ import absolute_import

import os
import re
import tempfile

from .i18n import _
from .node import nullid, short

from . import (
    encoding,
    error,
    formatter,
    match,
    pycompat,
    registrar,
    scmutil,
    simplemerge,
    tagmerge,
    templatekw,
    templater,
    util,
)

def _toolstr(ui, tool, part, *args):
    return ui.config("merge-tools", tool + "." + part, *args)

def _toolbool(ui, tool, part,*args):
    return ui.configbool("merge-tools", tool + "." + part, *args)

def _toollist(ui, tool, part):
    return ui.configlist("merge-tools", tool + "." + part)

internals = {}
# Merge tools to document.
internalsdoc = {}

internaltool = registrar.internalmerge()

# internal tool merge types
nomerge = internaltool.nomerge
mergeonly = internaltool.mergeonly # just the full merge, no premerge
fullmerge = internaltool.fullmerge # both premerge and merge

_localchangedotherdeletedmsg = _(
    "local%(l)s changed %(fd)s which other%(o)s deleted\n"
    "use (c)hanged version, (d)elete, or leave (u)nresolved?"
    "$$ &Changed $$ &Delete $$ &Unresolved")

_otherchangedlocaldeletedmsg = _(
    "other%(o)s changed %(fd)s which local%(l)s deleted\n"
    "use (c)hanged version, leave (d)eleted, or "
    "leave (u)nresolved?"
    "$$ &Changed $$ &Deleted $$ &Unresolved")

class absentfilectx(object):
    """Represents a file that's ostensibly in a context but is actually not
    present in it.

    This is here because it's very specific to the filemerge code for now --
    other code is likely going to break with the values this returns."""
    def __init__(self, ctx, f):
        self._ctx = ctx
        self._f = f

    def path(self):
        return self._f

    def size(self):
        return None

    def data(self):
        return None

    def filenode(self):
        return nullid

    _customcmp = True
    def cmp(self, fctx):
        """compare with other file context

        returns True if different from fctx.
        """
        return not (fctx.isabsent() and
                    fctx.ctx() == self.ctx() and
                    fctx.path() == self.path())

    def flags(self):
        return ''

    def changectx(self):
        return self._ctx

    def isbinary(self):
        return False

    def isabsent(self):
        return True

def _findtool(ui, tool):
    if tool in internals:
        return tool
    return findexternaltool(ui, tool)

def findexternaltool(ui, tool):
    for kn in ("regkey", "regkeyalt"):
        k = _toolstr(ui, tool, kn)
        if not k:
            continue
        p = util.lookupreg(k, _toolstr(ui, tool, "regname"))
        if p:
            p = util.findexe(p + _toolstr(ui, tool, "regappend"))
            if p:
                return p
    exe = _toolstr(ui, tool, "executable", tool)
    return util.findexe(util.expandpath(exe))

def _picktool(repo, ui, path, binary, symlink, changedelete):
    def supportscd(tool):
        return tool in internals and internals[tool].mergetype == nomerge

    def check(tool, pat, symlink, binary, changedelete):
        tmsg = tool
        if pat:
            tmsg = _("%s (for pattern %s)") % (tool, pat)
        if not _findtool(ui, tool):
            if pat: # explicitly requested tool deserves a warning
                ui.warn(_("couldn't find merge tool %s\n") % tmsg)
            else: # configured but non-existing tools are more silent
                ui.note(_("couldn't find merge tool %s\n") % tmsg)
        elif symlink and not _toolbool(ui, tool, "symlink"):
            ui.warn(_("tool %s can't handle symlinks\n") % tmsg)
        elif binary and not _toolbool(ui, tool, "binary"):
            ui.warn(_("tool %s can't handle binary\n") % tmsg)
        elif changedelete and not supportscd(tool):
            # the nomerge tools are the only tools that support change/delete
            # conflicts
            pass
        elif not util.gui() and _toolbool(ui, tool, "gui"):
            ui.warn(_("tool %s requires a GUI\n") % tmsg)
        else:
            return True
        return False

    # internal config: ui.forcemerge
    # forcemerge comes from command line arguments, highest priority
    force = ui.config('ui', 'forcemerge')
    if force:
        toolpath = _findtool(ui, force)
        if changedelete and not supportscd(toolpath):
            return ":prompt", None
        else:
            if toolpath:
                return (force, util.shellquote(toolpath))
            else:
                # mimic HGMERGE if given tool not found
                return (force, force)

    # HGMERGE takes next precedence
    hgmerge = encoding.environ.get("HGMERGE")
    if hgmerge:
        if changedelete and not supportscd(hgmerge):
            return ":prompt", None
        else:
            return (hgmerge, hgmerge)

    # then patterns
    for pat, tool in ui.configitems("merge-patterns"):
        mf = match.match(repo.root, '', [pat])
        if mf(path) and check(tool, pat, symlink, False, changedelete):
            toolpath = _findtool(ui, tool)
            return (tool, util.shellquote(toolpath))

    # then merge tools
    tools = {}
    disabled = set()
    for k, v in ui.configitems("merge-tools"):
        t = k.split('.')[0]
        if t not in tools:
            tools[t] = int(_toolstr(ui, t, "priority"))
        if _toolbool(ui, t, "disabled"):
            disabled.add(t)
    names = tools.keys()
    tools = sorted([(-p, tool) for tool, p in tools.items()
                    if tool not in disabled])
    uimerge = ui.config("ui", "merge")
    if uimerge:
        # external tools defined in uimerge won't be able to handle
        # change/delete conflicts
        if uimerge not in names and not changedelete:
            return (uimerge, uimerge)
        tools.insert(0, (None, uimerge)) # highest priority
    tools.append((None, "hgmerge")) # the old default, if found
    for p, t in tools:
        if check(t, None, symlink, binary, changedelete):
            toolpath = _findtool(ui, t)
            return (t, util.shellquote(toolpath))

    # internal merge or prompt as last resort
    if symlink or binary or changedelete:
        if not changedelete and len(tools):
            # any tool is rejected by capability for symlink or binary
            ui.warn(_("no tool found to merge %s\n") % path)
        return ":prompt", None
    return ":merge", None

def _eoltype(data):
    "Guess the EOL type of a file"
    if '\0' in data: # binary
        return None
    if '\r\n' in data: # Windows
        return '\r\n'
    if '\r' in data: # Old Mac
        return '\r'
    if '\n' in data: # UNIX
        return '\n'
    return None # unknown

def _matcheol(file, back):
    "Convert EOL markers in a file to match origfile"
    tostyle = _eoltype(back.data()) # No repo.wread filters?
    if tostyle:
        data = util.readfile(file)
        style = _eoltype(data)
        if style:
            newdata = data.replace(style, tostyle)
            if newdata != data:
                util.writefile(file, newdata)

@internaltool('prompt', nomerge)
def _iprompt(repo, mynode, orig, fcd, fco, fca, toolconf, labels=None):
    """Asks the user which of the local `p1()` or the other `p2()` version to
    keep as the merged version."""
    ui = repo.ui
    fd = fcd.path()

    prompts = partextras(labels)
    prompts['fd'] = fd
    try:
        if fco.isabsent():
            index = ui.promptchoice(
                _localchangedotherdeletedmsg % prompts, 2)
            choice = ['local', 'other', 'unresolved'][index]
        elif fcd.isabsent():
            index = ui.promptchoice(
                _otherchangedlocaldeletedmsg % prompts, 2)
            choice = ['other', 'local', 'unresolved'][index]
        else:
            index = ui.promptchoice(
                _("keep (l)ocal%(l)s, take (o)ther%(o)s, or leave (u)nresolved"
                  " for %(fd)s?"
                  "$$ &Local $$ &Other $$ &Unresolved") % prompts, 2)
            choice = ['local', 'other', 'unresolved'][index]

        if choice == 'other':
            return _iother(repo, mynode, orig, fcd, fco, fca, toolconf,
                           labels)
        elif choice == 'local':
            return _ilocal(repo, mynode, orig, fcd, fco, fca, toolconf,
                           labels)
        elif choice == 'unresolved':
            return _ifail(repo, mynode, orig, fcd, fco, fca, toolconf,
                          labels)
    except error.ResponseExpected:
        ui.write("\n")
        return _ifail(repo, mynode, orig, fcd, fco, fca, toolconf,
                      labels)

@internaltool('local', nomerge)
def _ilocal(repo, mynode, orig, fcd, fco, fca, toolconf, labels=None):
    """Uses the local `p1()` version of files as the merged version."""
    return 0, fcd.isabsent()

@internaltool('other', nomerge)
def _iother(repo, mynode, orig, fcd, fco, fca, toolconf, labels=None):
    """Uses the other `p2()` version of files as the merged version."""
    if fco.isabsent():
        # local changed, remote deleted -- 'deleted' picked
        _underlyingfctxifabsent(fcd).remove()
        deleted = True
    else:
        _underlyingfctxifabsent(fcd).write(fco.data(), fco.flags())
        deleted = False
    return 0, deleted

@internaltool('fail', nomerge)
def _ifail(repo, mynode, orig, fcd, fco, fca, toolconf, labels=None):
    """
    Rather than attempting to merge files that were modified on both
    branches, it marks them as unresolved. The resolve command must be
    used to resolve these conflicts."""
    # for change/delete conflicts write out the changed version, then fail
    if fcd.isabsent():
        _underlyingfctxifabsent(fcd).write(fco.data(), fco.flags())
    return 1, False

def _underlyingfctxifabsent(filectx):
    """Sometimes when resolving, our fcd is actually an absentfilectx, but
    we want to write to it (to do the resolve). This helper returns the
    underyling workingfilectx in that case.
    """
    if filectx.isabsent():
        return filectx.changectx()[filectx.path()]
    else:
        return filectx

def _premerge(repo, fcd, fco, fca, toolconf, files, labels=None):
    tool, toolpath, binary, symlink = toolconf
    if symlink or fcd.isabsent() or fco.isabsent():
        return 1
    unused, unused, unused, back = files

    ui = repo.ui

    validkeep = ['keep', 'keep-merge3']

    # do we attempt to simplemerge first?
    try:
        premerge = _toolbool(ui, tool, "premerge", not binary)
    except error.ConfigError:
        premerge = _toolstr(ui, tool, "premerge", "").lower()
        if premerge not in validkeep:
            _valid = ', '.join(["'" + v + "'" for v in validkeep])
            raise error.ConfigError(_("%s.premerge not valid "
                                      "('%s' is neither boolean nor %s)") %
                                    (tool, premerge, _valid))

    if premerge:
        if premerge == 'keep-merge3':
            if not labels:
                labels = _defaultconflictlabels
            if len(labels) < 3:
                labels.append('base')
        r = simplemerge.simplemerge(ui, fcd, fca, fco, quiet=True, label=labels)
        if not r:
            ui.debug(" premerge successful\n")
            return 0
        if premerge not in validkeep:
            # restore from backup and try again
            _restorebackup(fcd, back)
    return 1 # continue merging

def _mergecheck(repo, mynode, orig, fcd, fco, fca, toolconf):
    tool, toolpath, binary, symlink = toolconf
    if symlink:
        repo.ui.warn(_('warning: internal %s cannot merge symlinks '
                       'for %s\n') % (tool, fcd.path()))
        return False
    if fcd.isabsent() or fco.isabsent():
        repo.ui.warn(_('warning: internal %s cannot merge change/delete '
                       'conflict for %s\n') % (tool, fcd.path()))
        return False
    return True

def _merge(repo, mynode, orig, fcd, fco, fca, toolconf, files, labels, mode):
    """
    Uses the internal non-interactive simple merge algorithm for merging
    files. It will fail if there are any conflicts and leave markers in
    the partially merged file. Markers will have two sections, one for each side
    of merge, unless mode equals 'union' which suppresses the markers."""
    ui = repo.ui

    r = simplemerge.simplemerge(ui, fcd, fca, fco, label=labels, mode=mode)
    return True, r, False

@internaltool('union', fullmerge,
              _("warning: conflicts while merging %s! "
                "(edit, then use 'hg resolve --mark')\n"),
              precheck=_mergecheck)
def _iunion(repo, mynode, orig, fcd, fco, fca, toolconf, files, labels=None):
    """
    Uses the internal non-interactive simple merge algorithm for merging
    files. It will use both left and right sides for conflict regions.
    No markers are inserted."""
    return _merge(repo, mynode, orig, fcd, fco, fca, toolconf,
                  files, labels, 'union')

@internaltool('merge', fullmerge,
              _("warning: conflicts while merging %s! "
                "(edit, then use 'hg resolve --mark')\n"),
              precheck=_mergecheck)
def _imerge(repo, mynode, orig, fcd, fco, fca, toolconf, files, labels=None):
    """
    Uses the internal non-interactive simple merge algorithm for merging
    files. It will fail if there are any conflicts and leave markers in
    the partially merged file. Markers will have two sections, one for each side
    of merge."""
    return _merge(repo, mynode, orig, fcd, fco, fca, toolconf,
                  files, labels, 'merge')

@internaltool('merge3', fullmerge,
              _("warning: conflicts while merging %s! "
                "(edit, then use 'hg resolve --mark')\n"),
              precheck=_mergecheck)
def _imerge3(repo, mynode, orig, fcd, fco, fca, toolconf, files, labels=None):
    """
    Uses the internal non-interactive simple merge algorithm for merging
    files. It will fail if there are any conflicts and leave markers in
    the partially merged file. Marker will have three sections, one from each
    side of the merge and one for the base content."""
    if not labels:
        labels = _defaultconflictlabels
    if len(labels) < 3:
        labels.append('base')
    return _imerge(repo, mynode, orig, fcd, fco, fca, toolconf, files, labels)

def _imergeauto(repo, mynode, orig, fcd, fco, fca, toolconf, files,
                labels=None, localorother=None):
    """
    Generic driver for _imergelocal and _imergeother
    """
    assert localorother is not None
    tool, toolpath, binary, symlink = toolconf
    r = simplemerge.simplemerge(repo.ui, fcd, fca, fco, label=labels,
                                localorother=localorother)
    return True, r

@internaltool('merge-local', mergeonly, precheck=_mergecheck)
def _imergelocal(*args, **kwargs):
    """
    Like :merge, but resolve all conflicts non-interactively in favor
    of the local `p1()` changes."""
    success, status = _imergeauto(localorother='local', *args, **kwargs)
    return success, status, False

@internaltool('merge-other', mergeonly, precheck=_mergecheck)
def _imergeother(*args, **kwargs):
    """
    Like :merge, but resolve all conflicts non-interactively in favor
    of the other `p2()` changes."""
    success, status = _imergeauto(localorother='other', *args, **kwargs)
    return success, status, False

@internaltool('tagmerge', mergeonly,
              _("automatic tag merging of %s failed! "
                "(use 'hg resolve --tool :merge' or another merge "
                "tool of your choice)\n"))
def _itagmerge(repo, mynode, orig, fcd, fco, fca, toolconf, files, labels=None):
    """
    Uses the internal tag merge algorithm (experimental).
    """
    success, status = tagmerge.merge(repo, fcd, fco, fca)
    return success, status, False

@internaltool('dump', fullmerge)
def _idump(repo, mynode, orig, fcd, fco, fca, toolconf, files, labels=None):
    """
    Creates three versions of the files to merge, containing the
    contents of local, other and base. These files can then be used to
    perform a merge manually. If the file to be merged is named
    ``a.txt``, these files will accordingly be named ``a.txt.local``,
    ``a.txt.other`` and ``a.txt.base`` and they will be placed in the
    same directory as ``a.txt``.

    This implies permerge. Therefore, files aren't dumped, if premerge
    runs successfully. Use :forcedump to forcibly write files out.
    """
    a = _workingpath(repo, fcd)
    fd = fcd.path()

    # Run ``flushall()`` to make any missing folders the following wwrite
    # calls might be depending on.
    from . import context
    if isinstance(fcd, context.overlayworkingfilectx):
        fcd.ctx().flushall()

    util.writefile(a + ".local", fcd.decodeddata())
    repo.wwrite(fd + ".other", fco.data(), fco.flags())
    repo.wwrite(fd + ".base", fca.data(), fca.flags())
    return False, 1, False

@internaltool('forcedump', mergeonly)
def _forcedump(repo, mynode, orig, fcd, fco, fca, toolconf, files,
                labels=None):
    """
    Creates three versions of the files as same as :dump, but omits premerge.
    """
    return _idump(repo, mynode, orig, fcd, fco, fca, toolconf, files,
                labels=labels)

def _xmerge(repo, mynode, orig, fcd, fco, fca, toolconf, files, labels=None):
    tool, toolpath, binary, symlink = toolconf
    if fcd.isabsent() or fco.isabsent():
        repo.ui.warn(_('warning: %s cannot merge change/delete conflict '
                       'for %s\n') % (tool, fcd.path()))
        return False, 1, None
    unused, unused, unused, back = files
    a = _workingpath(repo, fcd)
    b, c = _maketempfiles(repo, fco, fca)
    try:
        out = ""
        env = {'HG_FILE': fcd.path(),
               'HG_MY_NODE': short(mynode),
               'HG_OTHER_NODE': str(fco.changectx()),
               'HG_BASE_NODE': str(fca.changectx()),
               'HG_MY_ISLINK': 'l' in fcd.flags(),
               'HG_OTHER_ISLINK': 'l' in fco.flags(),
               'HG_BASE_ISLINK': 'l' in fca.flags(),
               }
        ui = repo.ui

        args = _toolstr(ui, tool, "args")
        if "$output" in args:
            # read input from backup, write to original
            out = a
            a = repo.wvfs.join(back.path())
        replace = {'local': a, 'base': b, 'other': c, 'output': out}
        args = util.interpolate(r'\$', replace, args,
                                lambda s: util.shellquote(util.localpath(s)))
        cmd = toolpath + ' ' + args
        if _toolbool(ui, tool, "gui"):
            repo.ui.status(_('running merge tool %s for file %s\n') %
                           (tool, fcd.path()))
        repo.ui.debug('launching merge tool: %s\n' % cmd)
        r = ui.system(cmd, cwd=repo.root, environ=env, blockedtag='mergetool')
        repo.ui.debug('merge tool returned: %d\n' % r)
        return True, r, False
    finally:
        util.unlink(b)
        util.unlink(c)

def _formatconflictmarker(repo, ctx, template, label, pad):
    """Applies the given template to the ctx, prefixed by the label.

    Pad is the minimum width of the label prefix, so that multiple markers
    can have aligned templated parts.
    """
    if ctx.node() is None:
        ctx = ctx.p1()

    props = templatekw.keywords.copy()
    props['templ'] = template
    props['ctx'] = ctx
    props['repo'] = repo
    templateresult = template.render(props)

    label = ('%s:' % label).ljust(pad + 1)
    mark = '%s %s' % (label, templateresult)

    if mark:
        mark = mark.splitlines()[0] # split for safety

    # 8 for the prefix of conflict marker lines (e.g. '<<<<<<< ')
    return util.ellipsis(mark, 80 - 8)

_defaultconflictlabels = ['local', 'other']

def _formatlabels(repo, fcd, fco, fca, labels):
    """Formats the given labels using the conflict marker template.

    Returns a list of formatted labels.
    """
    cd = fcd.changectx()
    co = fco.changectx()
    ca = fca.changectx()

    ui = repo.ui
    template = ui.config('ui', 'mergemarkertemplate')
    template = templater.unquotestring(template)
    tmpl = formatter.maketemplater(ui, template)

    pad = max(len(l) for l in labels)

    newlabels = [_formatconflictmarker(repo, cd, tmpl, labels[0], pad),
                 _formatconflictmarker(repo, co, tmpl, labels[1], pad)]
    if len(labels) > 2:
        newlabels.append(_formatconflictmarker(repo, ca, tmpl, labels[2], pad))
    return newlabels

def partextras(labels):
    """Return a dictionary of extra labels for use in prompts to the user

    Intended use is in strings of the form "(l)ocal%(l)s".
    """
    if labels is None:
        return {
            "l": "",
            "o": "",
        }

    return {
        "l": " [%s]" % labels[0],
        "o": " [%s]" % labels[1],
    }

def _restorebackup(fcd, back):
    # TODO: Add a workingfilectx.write(otherfilectx) path so we can use
    # util.copy here instead.
    fcd.write(back.data(), fcd.flags())

def _makebackup(repo, ui, wctx, fcd, premerge):
    """Makes and returns a filectx-like object for ``fcd``'s backup file.

    In addition to preserving the user's pre-existing modifications to `fcd`
    (if any), the backup is used to undo certain premerges, confirm whether a
    merge changed anything, and determine what line endings the new file should
    have.
    """
    if fcd.isabsent():
        return None
    # TODO: Break this import cycle somehow. (filectx -> ctx -> fileset ->
    # merge -> filemerge). (I suspect the fileset import is the weakest link)
    from . import context
    a = _workingpath(repo, fcd)
    back = scmutil.origpath(ui, repo, a)
    inworkingdir = (back.startswith(repo.wvfs.base) and not
        back.startswith(repo.vfs.base))

    if isinstance(fcd, context.overlayworkingfilectx) and inworkingdir:
        # If the backup file is to be in the working directory, and we're
        # merging in-memory, we must redirect the backup to the memory context
        # so we don't disturb the working directory.
        relpath = back[len(repo.wvfs.base) + 1:]
        wctx[relpath].write(fcd.data(), fcd.flags())
        return wctx[relpath]
    else:
        # Otherwise, write to wherever the user specified the backups should go.
        #
        # A arbitraryfilectx is returned, so we can run the same functions on
        # the backup context regardless of where it lives.
        if premerge:
            util.copyfile(a, back)
        return context.arbitraryfilectx(back, repo=repo)

def _maketempfiles(repo, fco, fca):
    """Writes out `fco` and `fca` as temporary files, so an external merge
    tool may use them.
    """
    def temp(prefix, ctx):
        fullbase, ext = os.path.splitext(ctx.path())
        pre = "%s~%s." % (os.path.basename(fullbase), prefix)
        (fd, name) = tempfile.mkstemp(prefix=pre, suffix=ext)
        data = repo.wwritedata(ctx.path(), ctx.data())
        f = os.fdopen(fd, pycompat.sysstr("wb"))
        f.write(data)
        f.close()
        return name

    b = temp("base", fca)
    c = temp("other", fco)

    return b, c

def _filemerge(premerge, repo, wctx, mynode, orig, fcd, fco, fca, labels=None):
    """perform a 3-way merge in the working directory

    premerge = whether this is a premerge
    mynode = parent node before merge
    orig = original local filename before merge
    fco = other file context
    fca = ancestor file context
    fcd = local file context for current/destination file

    Returns whether the merge is complete, the return value of the merge, and
    a boolean indicating whether the file was deleted from disk."""

    if not fco.cmp(fcd): # files identical?
        return True, None, False

    ui = repo.ui
    fd = fcd.path()
    binary = fcd.isbinary() or fco.isbinary() or fca.isbinary()
    symlink = 'l' in fcd.flags() + fco.flags()
    changedelete = fcd.isabsent() or fco.isabsent()
    tool, toolpath = _picktool(repo, ui, fd, binary, symlink, changedelete)
    if tool in internals and tool.startswith('internal:'):
        # normalize to new-style names (':merge' etc)
        tool = tool[len('internal'):]
    ui.debug("picked tool '%s' for %s (binary %s symlink %s changedelete %s)\n"
             % (tool, fd, pycompat.bytestr(binary), pycompat.bytestr(symlink),
                    pycompat.bytestr(changedelete)))

    if tool in internals:
        func = internals[tool]
        mergetype = func.mergetype
        onfailure = func.onfailure
        precheck = func.precheck
    else:
        func = _xmerge
        mergetype = fullmerge
        onfailure = _("merging %s failed!\n")
        precheck = None

        # If using deferred writes, must flush any deferred contents if running
        # an external merge tool since it has arbitrary access to the working
        # copy.
        wctx.flushall()

    toolconf = tool, toolpath, binary, symlink

    if mergetype == nomerge:
        r, deleted = func(repo, mynode, orig, fcd, fco, fca, toolconf, labels)
        return True, r, deleted

    if premerge:
        if orig != fco.path():
            ui.status(_("merging %s and %s to %s\n") % (orig, fco.path(), fd))
        else:
            ui.status(_("merging %s\n") % fd)

    ui.debug("my %s other %s ancestor %s\n" % (fcd, fco, fca))

    if precheck and not precheck(repo, mynode, orig, fcd, fco, fca,
                                 toolconf):
        if onfailure:
            ui.warn(onfailure % fd)
        return True, 1, False

    back = _makebackup(repo, ui, wctx, fcd, premerge)
    files = (None, None, None, back)
    r = 1
    try:
        markerstyle = ui.config('ui', 'mergemarkers')
        if not labels:
            labels = _defaultconflictlabels
        if markerstyle != 'basic':
            labels = _formatlabels(repo, fcd, fco, fca, labels)

        if premerge and mergetype == fullmerge:
            r = _premerge(repo, fcd, fco, fca, toolconf, files, labels=labels)
            # complete if premerge successful (r is 0)
            return not r, r, False

        needcheck, r, deleted = func(repo, mynode, orig, fcd, fco, fca,
                                     toolconf, files, labels=labels)

        if needcheck:
            r = _check(repo, r, ui, tool, fcd, files)

        if r:
            if onfailure:
                ui.warn(onfailure % fd)
            _onfilemergefailure(ui)

        return True, r, deleted
    finally:
        if not r and back is not None:
            back.remove()

def _haltmerge():
    msg = _('merge halted after failed merge (see hg resolve)')
    raise error.InterventionRequired(msg)

def _onfilemergefailure(ui):
    action = ui.config('merge', 'on-failure')
    if action == 'prompt':
        msg = _('continue merge operation (yn)?' '$$ &Yes $$ &No')
        if ui.promptchoice(msg, 0) == 1:
            _haltmerge()
    if action == 'halt':
        _haltmerge()
    # default action is 'continue', in which case we neither prompt nor halt

def _check(repo, r, ui, tool, fcd, files):
    fd = fcd.path()
    unused, unused, unused, back = files

    if not r and (_toolbool(ui, tool, "checkconflicts") or
                  'conflicts' in _toollist(ui, tool, "check")):
        if re.search("^(<<<<<<< .*|=======|>>>>>>> .*)$", fcd.data(),
                     re.MULTILINE):
            r = 1

    checked = False
    if 'prompt' in _toollist(ui, tool, "check"):
        checked = True
        if ui.promptchoice(_("was merge of '%s' successful (yn)?"
                             "$$ &Yes $$ &No") % fd, 1):
            r = 1

    if not r and not checked and (_toolbool(ui, tool, "checkchanged") or
                                  'changed' in
                                  _toollist(ui, tool, "check")):
        if back is not None and not fcd.cmp(back):
            if ui.promptchoice(_(" output file %s appears unchanged\n"
                                 "was merge successful (yn)?"
                                 "$$ &Yes $$ &No") % fd, 1):
                r = 1

    if back is not None and _toolbool(ui, tool, "fixeol"):
        _matcheol(_workingpath(repo, fcd), back)

    return r

def _workingpath(repo, ctx):
    return repo.wjoin(ctx.path())

def premerge(repo, wctx, mynode, orig, fcd, fco, fca, labels=None):
    return _filemerge(True, repo, wctx, mynode, orig, fcd, fco, fca,
                      labels=labels)

def filemerge(repo, wctx, mynode, orig, fcd, fco, fca, labels=None):
    return _filemerge(False, repo, wctx, mynode, orig, fcd, fco, fca,
                      labels=labels)

def loadinternalmerge(ui, extname, registrarobj):
    """Load internal merge tool from specified registrarobj
    """
    for name, func in registrarobj._table.iteritems():
        fullname = ':' + name
        internals[fullname] = func
        internals['internal:' + name] = func
        internalsdoc[fullname] = func

# load built-in merge tools explicitly to setup internalsdoc
loadinternalmerge(None, None, internaltool)

# tell hggettext to extract docstrings from these functions:
i18nfunctions = internals.values()