mercurial/url.py

sparse-read: move from a recursive-based approach to a heap-based one

The previous recursive approach was trying to optimise each read slice to have
a good density. It had the tendency to over-optimize smaller slices while
leaving larger hole in others.

The new approach focuses on improving the combined density of all the reads,
instead of the individual slices. It slices at the largest gaps first, as they
reduce the total amount of read data the most efficiently.

Another benefit of this approach is that we iterate over the delta chain only
once, reducing the overhead of slicing long delta chains.

On the repository we use for tests, the new approach shows similar or faster
performance than the current default linear full read.

The repository contains about 450,000 revisions with many concurrent
topological branches. Tests have been run on two versions of the repository:
one built with the current delta constraint, and the other with an unlimited
delta span (using 'experimental.maxdeltachainspan=0')

Below are timings for building 1% of all the revision in the manifest log using
'hg perfrevlogrevisions -m'. Times are given in seconds. They include the new
couple of follow-up changeset in this series.

delta-span  standard    unlimited
linear-read     922s         632s
sparse-read     814s         566s

# url.py - HTTP handling for mercurial
#
# Copyright 2005, 2006, 2007, 2008 Matt Mackall <[e-mail]>
# Copyright 2006, 2007 Alexis S. L. Carvalho <[e-mail]>
# Copyright 2006 Vadim Gelfer <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from __future__ import absolute_import

import base64
import os
import socket

from .i18n import _
from . import (
    encoding,
    error,
    httpconnection as httpconnectionmod,
    keepalive,
    pycompat,
    sslutil,
    urllibcompat,
    util,
)

httplib = util.httplib
stringio = util.stringio
urlerr = util.urlerr
urlreq = util.urlreq

def escape(s, quote=None):
    '''Replace special characters "&", "<" and ">" to HTML-safe sequences.
    If the optional flag quote is true, the quotation mark character (")
    is also translated.

    This is the same as cgi.escape in Python, but always operates on
    bytes, whereas cgi.escape in Python 3 only works on unicodes.
    '''
    s = s.replace(b"&", b"&amp;")
    s = s.replace(b"<", b"&lt;")
    s = s.replace(b">", b"&gt;")
    if quote:
        s = s.replace(b'"', b"&quot;")
    return s

class passwordmgr(object):
    def __init__(self, ui, passwddb):
        self.ui = ui
        self.passwddb = passwddb

    def add_password(self, realm, uri, user, passwd):
        return self.passwddb.add_password(realm, uri, user, passwd)

    def find_user_password(self, realm, authuri):
        authinfo = self.passwddb.find_user_password(realm, authuri)
        user, passwd = authinfo
        if user and passwd:
            self._writedebug(user, passwd)
            return (user, passwd)

        if not user or not passwd:
            res = httpconnectionmod.readauthforuri(self.ui, authuri, user)
            if res:
                group, auth = res
                user, passwd = auth.get('username'), auth.get('password')
                self.ui.debug("using auth.%s.* for authentication\n" % group)
        if not user or not passwd:
            u = util.url(authuri)
            u.query = None
            if not self.ui.interactive():
                raise error.Abort(_('http authorization required for %s') %
                                 util.hidepassword(str(u)))

            self.ui.write(_("http authorization required for %s\n") %
                          util.hidepassword(str(u)))
            self.ui.write(_("realm: %s\n") % realm)
            if user:
                self.ui.write(_("user: %s\n") % user)
            else:
                user = self.ui.prompt(_("user:"), default=None)

            if not passwd:
                passwd = self.ui.getpass()

        self.passwddb.add_password(realm, authuri, user, passwd)
        self._writedebug(user, passwd)
        return (user, passwd)

    def _writedebug(self, user, passwd):
        msg = _('http auth: user %s, password %s\n')
        self.ui.debug(msg % (user, passwd and '*' * len(passwd) or 'not set'))

    def find_stored_password(self, authuri):
        return self.passwddb.find_user_password(None, authuri)

class proxyhandler(urlreq.proxyhandler):
    def __init__(self, ui):
        proxyurl = (ui.config("http_proxy", "host") or
                        encoding.environ.get('http_proxy'))
        # XXX proxyauthinfo = None

        if proxyurl:
            # proxy can be proper url or host[:port]
            if not (proxyurl.startswith('http:') or
                    proxyurl.startswith('https:')):
                proxyurl = 'http://' + proxyurl + '/'
            proxy = util.url(proxyurl)
            if not proxy.user:
                proxy.user = ui.config("http_proxy", "user")
                proxy.passwd = ui.config("http_proxy", "passwd")

            # see if we should use a proxy for this url
            no_list = ["localhost", "127.0.0.1"]
            no_list.extend([p.lower() for
                            p in ui.configlist("http_proxy", "no")])
            no_list.extend([p.strip().lower() for
                            p in encoding.environ.get("no_proxy", '').split(',')
                            if p.strip()])
            # "http_proxy.always" config is for running tests on localhost
            if ui.configbool("http_proxy", "always"):
                self.no_list = []
            else:
                self.no_list = no_list

            proxyurl = str(proxy)
            proxies = {'http': proxyurl, 'https': proxyurl}
            ui.debug('proxying through http://%s:%s\n' %
                      (proxy.host, proxy.port))
        else:
            proxies = {}

        urlreq.proxyhandler.__init__(self, proxies)
        self.ui = ui

    def proxy_open(self, req, proxy, type_):
        host = urllibcompat.gethost(req).split(':')[0]
        for e in self.no_list:
            if host == e:
                return None
            if e.startswith('*.') and host.endswith(e[2:]):
                return None
            if e.startswith('.') and host.endswith(e[1:]):
                return None

        return urlreq.proxyhandler.proxy_open(self, req, proxy, type_)

def _gen_sendfile(orgsend):
    def _sendfile(self, data):
        # send a file
        if isinstance(data, httpconnectionmod.httpsendfile):
            # if auth required, some data sent twice, so rewind here
            data.seek(0)
            for chunk in util.filechunkiter(data):
                orgsend(self, chunk)
        else:
            orgsend(self, data)
    return _sendfile

has_https = util.safehasattr(urlreq, 'httpshandler')

class httpconnection(keepalive.HTTPConnection):
    # must be able to send big bundle as stream.
    send = _gen_sendfile(keepalive.HTTPConnection.send)

    def getresponse(self):
        proxyres = getattr(self, 'proxyres', None)
        if proxyres:
            if proxyres.will_close:
                self.close()
            self.proxyres = None
            return proxyres
        return keepalive.HTTPConnection.getresponse(self)

# general transaction handler to support different ways to handle
# HTTPS proxying before and after Python 2.6.3.
def _generic_start_transaction(handler, h, req):
    tunnel_host = getattr(req, '_tunnel_host', None)
    if tunnel_host:
        if tunnel_host[:7] not in ['http://', 'https:/']:
            tunnel_host = 'https://' + tunnel_host
        new_tunnel = True
    else:
        tunnel_host = urllibcompat.getselector(req)
        new_tunnel = False

    if new_tunnel or tunnel_host == urllibcompat.getfullurl(req): # has proxy
        u = util.url(tunnel_host)
        if new_tunnel or u.scheme == 'https': # only use CONNECT for HTTPS
            h.realhostport = ':'.join([u.host, (u.port or '443')])
            h.headers = req.headers.copy()
            h.headers.update(handler.parent.addheaders)
            return

    h.realhostport = None
    h.headers = None

def _generic_proxytunnel(self):
    proxyheaders = dict(
            [(x, self.headers[x]) for x in self.headers
             if x.lower().startswith('proxy-')])
    self.send('CONNECT %s HTTP/1.0\r\n' % self.realhostport)
    for header in proxyheaders.iteritems():
        self.send('%s: %s\r\n' % header)
    self.send('\r\n')

    # majority of the following code is duplicated from
    # httplib.HTTPConnection as there are no adequate places to
    # override functions to provide the needed functionality
    res = self.response_class(self.sock,
                              strict=self.strict,
                              method=self._method)

    while True:
        version, status, reason = res._read_status()
        if status != httplib.CONTINUE:
            break
        # skip lines that are all whitespace
        list(iter(lambda: res.fp.readline().strip(), ''))
    res.status = status
    res.reason = reason.strip()

    if res.status == 200:
        # skip lines until we find a blank line
        list(iter(res.fp.readline, '\r\n'))
        return True

    if version == 'HTTP/1.0':
        res.version = 10
    elif version.startswith('HTTP/1.'):
        res.version = 11
    elif version == 'HTTP/0.9':
        res.version = 9
    else:
        raise httplib.UnknownProtocol(version)

    if res.version == 9:
        res.length = None
        res.chunked = 0
        res.will_close = 1
        res.msg = httplib.HTTPMessage(stringio())
        return False

    res.msg = httplib.HTTPMessage(res.fp)
    res.msg.fp = None

    # are we using the chunked-style of transfer encoding?
    trenc = res.msg.getheader('transfer-encoding')
    if trenc and trenc.lower() == "chunked":
        res.chunked = 1
        res.chunk_left = None
    else:
        res.chunked = 0

    # will the connection close at the end of the response?
    res.will_close = res._check_close()

    # do we have a Content-Length?
    # NOTE: RFC 2616, section 4.4, #3 says we ignore this if
    # transfer-encoding is "chunked"
    length = res.msg.getheader('content-length')
    if length and not res.chunked:
        try:
            res.length = int(length)
        except ValueError:
            res.length = None
        else:
            if res.length < 0:  # ignore nonsensical negative lengths
                res.length = None
    else:
        res.length = None

    # does the body have a fixed length? (of zero)
    if (status == httplib.NO_CONTENT or status == httplib.NOT_MODIFIED or
        100 <= status < 200 or # 1xx codes
        res._method == 'HEAD'):
        res.length = 0

    # if the connection remains open, and we aren't using chunked, and
    # a content-length was not provided, then assume that the connection
    # WILL close.
    if (not res.will_close and
       not res.chunked and
       res.length is None):
        res.will_close = 1

    self.proxyres = res

    return False

class httphandler(keepalive.HTTPHandler):
    def http_open(self, req):
        return self.do_open(httpconnection, req)

    def _start_transaction(self, h, req):
        _generic_start_transaction(self, h, req)
        return keepalive.HTTPHandler._start_transaction(self, h, req)

if has_https:
    class httpsconnection(httplib.HTTPConnection):
        response_class = keepalive.HTTPResponse
        default_port = httplib.HTTPS_PORT
        # must be able to send big bundle as stream.
        send = _gen_sendfile(keepalive.safesend)
        getresponse = keepalive.wrapgetresponse(httplib.HTTPConnection)

        def __init__(self, host, port=None, key_file=None, cert_file=None,
                     *args, **kwargs):
            httplib.HTTPConnection.__init__(self, host, port, *args, **kwargs)
            self.key_file = key_file
            self.cert_file = cert_file

        def connect(self):
            self.sock = socket.create_connection((self.host, self.port))

            host = self.host
            if self.realhostport: # use CONNECT proxy
                _generic_proxytunnel(self)
                host = self.realhostport.rsplit(':', 1)[0]
            self.sock = sslutil.wrapsocket(
                self.sock, self.key_file, self.cert_file, ui=self.ui,
                serverhostname=host)
            sslutil.validatesocket(self.sock)

    class httpshandler(keepalive.KeepAliveHandler, urlreq.httpshandler):
        def __init__(self, ui):
            keepalive.KeepAliveHandler.__init__(self)
            urlreq.httpshandler.__init__(self)
            self.ui = ui
            self.pwmgr = passwordmgr(self.ui,
                                     self.ui.httppasswordmgrdb)

        def _start_transaction(self, h, req):
            _generic_start_transaction(self, h, req)
            return keepalive.KeepAliveHandler._start_transaction(self, h, req)

        def https_open(self, req):
            # urllibcompat.getfullurl() does not contain credentials
            # and we may need them to match the certificates.
            url = urllibcompat.getfullurl(req)
            user, password = self.pwmgr.find_stored_password(url)
            res = httpconnectionmod.readauthforuri(self.ui, url, user)
            if res:
                group, auth = res
                self.auth = auth
                self.ui.debug("using auth.%s.* for authentication\n" % group)
            else:
                self.auth = None
            return self.do_open(self._makeconnection, req)

        def _makeconnection(self, host, port=None, *args, **kwargs):
            keyfile = None
            certfile = None

            if len(args) >= 1: # key_file
                keyfile = args[0]
            if len(args) >= 2: # cert_file
                certfile = args[1]
            args = args[2:]

            # if the user has specified different key/cert files in
            # hgrc, we prefer these
            if self.auth and 'key' in self.auth and 'cert' in self.auth:
                keyfile = self.auth['key']
                certfile = self.auth['cert']

            conn = httpsconnection(host, port, keyfile, certfile, *args,
                                   **kwargs)
            conn.ui = self.ui
            return conn

class httpdigestauthhandler(urlreq.httpdigestauthhandler):
    def __init__(self, *args, **kwargs):
        urlreq.httpdigestauthhandler.__init__(self, *args, **kwargs)
        self.retried_req = None

    def reset_retry_count(self):
        # Python 2.6.5 will call this on 401 or 407 errors and thus loop
        # forever. We disable reset_retry_count completely and reset in
        # http_error_auth_reqed instead.
        pass

    def http_error_auth_reqed(self, auth_header, host, req, headers):
        # Reset the retry counter once for each request.
        if req is not self.retried_req:
            self.retried_req = req
            self.retried = 0
        return urlreq.httpdigestauthhandler.http_error_auth_reqed(
                    self, auth_header, host, req, headers)

class httpbasicauthhandler(urlreq.httpbasicauthhandler):
    def __init__(self, *args, **kwargs):
        self.auth = None
        urlreq.httpbasicauthhandler.__init__(self, *args, **kwargs)
        self.retried_req = None

    def http_request(self, request):
        if self.auth:
            request.add_unredirected_header(self.auth_header, self.auth)

        return request

    def https_request(self, request):
        if self.auth:
            request.add_unredirected_header(self.auth_header, self.auth)

        return request

    def reset_retry_count(self):
        # Python 2.6.5 will call this on 401 or 407 errors and thus loop
        # forever. We disable reset_retry_count completely and reset in
        # http_error_auth_reqed instead.
        pass

    def http_error_auth_reqed(self, auth_header, host, req, headers):
        # Reset the retry counter once for each request.
        if req is not self.retried_req:
            self.retried_req = req
            self.retried = 0
        return urlreq.httpbasicauthhandler.http_error_auth_reqed(
                        self, auth_header, host, req, headers)

    def retry_http_basic_auth(self, host, req, realm):
        user, pw = self.passwd.find_user_password(
            realm, urllibcompat.getfullurl(req))
        if pw is not None:
            raw = "%s:%s" % (user, pw)
            auth = 'Basic %s' % base64.b64encode(raw).strip()
            if req.get_header(self.auth_header, None) == auth:
                return None
            self.auth = auth
            req.add_unredirected_header(self.auth_header, auth)
            return self.parent.open(req)
        else:
            return None

class cookiehandler(urlreq.basehandler):
    def __init__(self, ui):
        self.cookiejar = None

        cookiefile = ui.config('auth', 'cookiefile')
        if not cookiefile:
            return

        cookiefile = util.expandpath(cookiefile)
        try:
            cookiejar = util.cookielib.MozillaCookieJar(cookiefile)
            cookiejar.load()
            self.cookiejar = cookiejar
        except util.cookielib.LoadError as e:
            ui.warn(_('(error loading cookie file %s: %s; continuing without '
                      'cookies)\n') % (cookiefile, str(e)))

    def http_request(self, request):
        if self.cookiejar:
            self.cookiejar.add_cookie_header(request)

        return request

    def https_request(self, request):
        if self.cookiejar:
            self.cookiejar.add_cookie_header(request)

        return request

handlerfuncs = []

def opener(ui, authinfo=None):
    '''
    construct an opener suitable for urllib2
    authinfo will be added to the password manager
    '''
    # experimental config: ui.usehttp2
    if ui.configbool('ui', 'usehttp2'):
        handlers = [
            httpconnectionmod.http2handler(
                ui,
                passwordmgr(ui, ui.httppasswordmgrdb))
        ]
    else:
        handlers = [httphandler()]
        if has_https:
            handlers.append(httpshandler(ui))

    handlers.append(proxyhandler(ui))

    passmgr = passwordmgr(ui, ui.httppasswordmgrdb)
    if authinfo is not None:
        realm, uris, user, passwd = authinfo
        saveduser, savedpass = passmgr.find_stored_password(uris[0])
        if user != saveduser or passwd:
            passmgr.add_password(realm, uris, user, passwd)
        ui.debug('http auth: user %s, password %s\n' %
                 (user, passwd and '*' * len(passwd) or 'not set'))

    handlers.extend((httpbasicauthhandler(passmgr),
                     httpdigestauthhandler(passmgr)))
    handlers.extend([h(ui, passmgr) for h in handlerfuncs])
    handlers.append(cookiehandler(ui))
    opener = urlreq.buildopener(*handlers)

    # The user agent should should *NOT* be used by servers for e.g.
    # protocol detection or feature negotiation: there are other
    # facilities for that.
    #
    # "mercurial/proto-1.0" was the original user agent string and
    # exists for backwards compatibility reasons.
    #
    # The "(Mercurial %s)" string contains the distribution
    # name and version. Other client implementations should choose their
    # own distribution name. Since servers should not be using the user
    # agent string for anything, clients should be able to define whatever
    # user agent they deem appropriate.
    agent = 'mercurial/proto-1.0 (Mercurial %s)' % util.version()
    opener.addheaders = [(r'User-agent', pycompat.sysstr(agent))]

    # This header should only be needed by wire protocol requests. But it has
    # been sent on all requests since forever. We keep sending it for backwards
    # compatibility reasons. Modern versions of the wire protocol use
    # X-HgProto-<N> for advertising client support.
    opener.addheaders.append((r'Accept', r'application/mercurial-0.1'))
    return opener

def open(ui, url_, data=None):
    u = util.url(url_)
    if u.scheme:
        u.scheme = u.scheme.lower()
        url_, authinfo = u.authinfo()
    else:
        path = util.normpath(os.path.abspath(url_))
        url_ = 'file://' + urlreq.pathname2url(path)
        authinfo = None
    return opener(ui, authinfo).open(url_, data)